Replacement of the worn out electro-mechanical components of the 6cusec horizontal pump coupled with 50HP motor unit no.II at LIS Jandi Nud with allied works.

replacement of the worn out electro-mechanical components of the 6 cusec horizontal pump coupled with 50 hp motor unit no.II at LIS Jandi Nud with allied works .

Replacement of damaged / worn out components of 50 HP induction motor coupled with 6 cusec horizontal centrifugal pumping unit -II of LIS Jandi Nud by way of disconnecting all electrical connection, coupling pulley with nuts and bolts and foundation bolts of the motor and pump at LIS by using skilled labour, suitable tool and tackles. Removal of damaged bearings of motor on drive end and non drive end with the help of bearing puller, cleaning , greasing and P/F of 02 nos. bearings (6313/6213-DE/NDE). Extracting out old worn out/ damaged coupling pulley set, dismantling bearing brackets of pump, extracting out damaged bearings and providing and fitting and of 2nos bearing 6309. With proper greasing. Fabrication of new coupling set with requisite bore dia as per the shaft dia of pump and rotor shaft. Fabrication new cotter set as per requisite size, fitting of coupling pulley to respective shaft of pump and motor. Providing and fitting of gland set. Coupling of the motor -pump with the help of coupling pulley with nuts and bolts by using tools and tackles and manual labour. . Proper aligning of pump motor set on base frame Fixing of foundation bolts of the motor to the base frame. Testing of the pump motor set on full load. New fabrication done at workshop as per requisite size. Complete job includes the cost of the material, labour charges (both skilled & unskilled), fabrication and transportation charges of new components provided to motor and pump. Complete Job inclusive of all taxes.

Rebate on Old Parts

Replacement of worn out parts of 50 HP ATS( Starter) coupled with unit No- II and III by way of dismantling of starter by way of disconnecting, all the electrical connections of starters then draining of the oil from the starters tank at LIS Jandi Nud Then extracting out the damaged /burnt starters coils from the containers. Then loading in mechanical transport and shifting the same to work shop for replacement of damaged parts of starter (ATS) at workshop by way of extracting the damaged worn out parts. Rewinding of 2No ATS coils of unit no II and unit-III with good quality copper wire. Then P/F of no voltage coil, over load relay, moving and fixed contact point. Repair to tripping system by brazing and finishing to required size. Replacement of worn-out thimbles nuts-bolts and internal leads duly soldered properly Re-assembling the same. Shifting the starters to the site by using mechanical transport and the manual labour. Topping up of ATS with transformer oil. Making electrical connection and testing on full load at site. Complete job including cost of material, transportation charges of the material and labour charges etc. Complete Job inclusive of all taxes.

Rebate on Old Parts

M/S GOPAL ELECTRICAL

M/S HITAISHI ELECTRICALS AND MECHANICAL WORKS

M/S GOPAL ELECTRICAL

M/S HITAISHI ELECTRICALS AND MECHANICAL WORKS