Carryout the Renovation works in TNCSC godown campuses at Sivagangai, Thirupathur, Devakottai, Ilayangudi, Manamadurai and Karaikudi in Sivagangai District

Amount

CIVIL WORK

Carryout the Renovation works in TNCSC godown campuses at Sivagangai in Sivagangai District. Dismantling A.C Sheet roofing without roof timber and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

PLASTERING with cement mortor 1:3 (one cement and three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corrugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing etc. complete and as directed by the departmental officers.

White washing two coats with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Supplying and fixing of plain glass 4mm thick including cost of all materials and labour charges etc., complete.

Carryout the Renovation works in TNCSC godown campus at Thiruppathur in Sivagangai District. Dismantling Cuddapah slab and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

Dismantling A.C Sheet roofing without roof timber and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

CEMENT CONCRETE 1:5:10(one cement , five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete Loading platform wall.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

BRICK WORK in cement mortar 1:5(One cement, Five sand)using best quality IInd Class chamber burnt bricks size 9”x4 3/8 x 2 3/4’ for walls including cost of scaffolding curing , finishing etc., complete complying with standard specifications and as directed. In foundation and basement

In Ground floor upto 4.50M height above basement.

PLASTERING with cement mortor 1:3 (one cement and three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

FLOOR FINISHING with available semi polished cuddapah slab over a coat of bitumen at the rate of 17 kg /10 sq. meter over base concrete and laid over cement mortar 1:4(one cement and four sand) of 20mm thick including pointing the semi polished cuddapah slab with cement mortar 1:3 to full depth and directed.

FLOOR FINISHING with semi polished cuddapah slab over a coat of bitumen at the rate of 17 kg /10 sq. meter over base concrete and laid over cement mortar 1:4(one cement and four sand) of 20mm thick including pointing the semi polished cuddapah slab with cement mortar 1:3 to full depth and directed. The semi polished cuddapah slab shall be of size 60cm x 45cm for a thickness of 40mm machine cutting on all sides and top surface semi-polished. The Tolerance for thickness shall not exceed + 10%(Rate includes cost of all materials).

Supplying fabricating and fixing of steel truss using M.S angle iron for stanchion and forming truss used with M.S squire for rectangular pipe with necessary M.S angles for cleat and for purlin M.S square pipe has to be fabricated. The rate including cost of all materials, conveyance charges, fabrication, fixing charges with two coats of synthetic enamel paint over one coat of primer etc., complete complying with standard specification and as directed by the departmental officers. 75x75x8mm angle

Supplying and laying of High profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corrugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing(under lintel grove) cold rolled ROLLING SHUTTERS (Gear operated type) of approved quality of 18 gauge 7.5 cm wide cold rolled lathe section in one piece interlocked together with specially designed pipe shaft with adequate number of high tensile steel wire springs of approved quality complete with brackets side guides and arrangements for inside and outside locking arrangements with push and pull operations and pulling back handle with all accessories in best workmen ship and the entire shutter painted with two coats of best quality anti-corrosive paint over one coat of red oxide primer and clear opening of 3.0M width 4.50M height. The rolling shutter shall be placed below the lintel and behind the RCC curtain slab of 7.5 cm thick and 45 cm depth. Each rolling shutter shall be provided with one pair of approved quality of ball bearing complete. Rolling shutter should confirm to I.S.6248-1979and should be got approved by the Executive Engineer before fixing .[This specification consists of the following component materials required for erection of rolling shutter.(1).18 G 3" lathe section 1.90M long-29 Nos. (2)10 G guide channel 2.6Mlong-2 Nos.(3).13 G bottom plate for 1.8M long with angle.(4).M.S.pipe 40mm dia. C'class -2M long.(5).10SWG side plate 13"x12"-2 Nos.(6).2 SWG spring 3" bore. (7).'U'-clamp.(8).ball bearing suitable for 2 1/2 "pipe.(9).18 SWG clip suitablefor 4"lathe.(10).20 SWG M.S.sheet. Etc.

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing etc. complete and as directed by the departmental officers.

Supplying, fabricating and fixing in position M.S.Channel 100x50x6mm at the edge of loading platform with M.S bolt of 16mm dia of 45 cm long protection to the loading platform finishing in flush with the slab with C.M 1:3 complete including painting the exposed surface of M.S Channel with two coats of Anti corrosive mtalic nut brown colour paint over one coat red oxide primer etc., complete.

White washing two coats with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Supplying and fixing of plain glass 4mm thick including cost of all materials and labour charges etc., complete

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Carryout the Renovation works in TNCSC godown campus at Devakottai in Sivagangai District. Dismantling cuddpah slab and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

Dismantling Plain Cement Concrete and clearing away as directed by the departmental officers.

Dismantling A.C Sheet roofing without timber and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

Dismantling Weathering Course & pressed tiles and clearing away as directed by the departmental officers.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supply and filling the stone dust for filling the undulated road and levelling the stie for laying the Paver block.

CEMENT CONCRETE 1:5:10(one cement , five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler,` vibratory roller all labour charges etc., complete complying with standard specification and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild steel sheets of size 90cm x60cm 10gauge stiffened with welded mild steel angles of size 25mm x 25mm x 3mm laid with country wood joist of average of size 10cm x 6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporation officers. The rates should inclusive of cutting, bending, welding charges of M.S.sheets; M.S.angles etc complete complying with standard specification and as directed. Loading platform RCC wall and road toe wall.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

CEMENT CONCRETE 1:3:6(one cement, three sand and six aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Supplying and laying of interlocking paver block stone 83mm thick, over a base layer of crushed stone sand filling including cost of materials laying and labour charges etc.,

PLASTERING with cement mortor 1:3 (one cement and three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Pointing the cuddapah stone slab of 38/40mm thick to full depth of slabs with same mortar and the top surface rendered smooth, curing etc.,

FLOOR FINISHING with semi polished cuddapah slab over a coat of bitumen at the rate of 17 kg /10 sq. meter over base concrete and laid over cement mortar 1:4(one cement and four sand) of 20mm thick including pointing the semi polished cuddapah slab with cement mortar 1:3 to full depth and directed. The semi polished cuddapah slab shall be of size 60cm x 45cm for a thickness of 40mm machine cutting on all sides and top surface semi-polished. The Tolerance for thickness shall not exceed + 10%(Rate includes cost of all materials).

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corrugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Paving the flooring with Ceramic tiles of size 305x305x6mm of approved quality and colour over a base layer of C.M.1:3, 20mm thick in all floors used 0.20 kg / m2 including finishing the joints and pointing flush with even surfaces etc., complete complying with standard specifications and as directed.. (The tiles should be got approved by the Executive engineer before use on works).

Finishing the top of roof with one course of machine pressed tiles of size 230x230x20cm laid in cement mortar 1:2 (one of cement and two of sand)mixing with water proofing compound confirming to ISS at 2% weight of cement used and pointed with water proofing compound mixed with red oxide etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing solid core particle board flush shutter of nominal thick of 35mm with necessary T.W internal lipping conforming to IS 2302 with both sides alround commercial ply 35mm thick including supplying and fixing.

Supplying fabricating and fixing in position of Aluminium Anodised natural colour matt finish openable window in all floors with following sizes. All the three shutters with sliding arrangements the bottom section should have gutter arrangements so as to drain the water entering and made with extruded aluminium section for outer frames as shown below with necessary accessories such as rubber beeding. Necessary dismantling making necessary holes in RCC columns, Beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers. The Aluminium surfaces should be anodised with matt finish under electrically condition in accordance with IS specification 1868/1962 of Anodic thickness of not less than 15 microns (fifteen) for all sections . All the materials should be got approved by the Engineer incharge before fixing as directed.

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing etc. complete and as directed by the departmental officers.

Supplying, fabricating and fixing in position M.S.Channel 100x50x6mm at the edge of loading platform with M.S bolt of 16mm dia of 45 cm long protection to the loading platform finishing in flush with the slab with C.M 1:3 complete including painting the exposed surface of M.S Channel with two coats of Anti corrosive mtalic nut brown colour paint over one coat red osixe.

White washing two coats with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Carryout the Renovation works in TNCSC godown campus at Illayankudi in Sivagangai District. Dismantling cuddapah slab and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

Dismantling Plain cement concrete and clearing away as directed by the departmental officers.

Clean removal of Cement Plaster from walls as directed by the departmental officers.

Dismantling A.C Sheet roofing without timber roofing and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

Dismantling Brick work in cement mortar walls under 3M heigh for any thickness of wall and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with clean M sand in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

Supply and filling stone dust from approved quarry to work site and filling in undulated portion and levelling the site before laying the Paver block.

CEMENT CONCRETE 1:5:10(one cement , five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler,` vibratory roller all labour charges etc., complete complying with standard specification and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild steel sheets of size 90cm x60cm 10gauge stiffened with welded mild steel angles of size 25mm x 25mm x 3mm laid with country wood joist of average of size 10cm x 6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporation officers. The rates should inclusive of cutting, bending, welding charges of M.S.sheets; M.S.angles etc complete complying with standard specification and as directed. For Columns footing & plinth beame

For lintels and roof slab

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

In Ground floor upto 4.50M height above basement.

CEMENT CONCRETE 1:3:6(one cement, three sand and six aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Supplying and laying of interlocking paver block stone 83mm thick of approved quality over a base layer of crushed stone sand filling including cost of materials laying and labour charges etc., complete.

BRICK WORK in cement mortar 1:5(One cement, Five sand)using best quality IInd Class chamber burnt Bricks of size 9”x 4 3/8” x2 ¾’ for walls including cost of scaffolding curing , finishing etc., complete complying with standard specifications and as directed. In Ground floor upto 4.50M height above basement.

Brick partition wall in cement mortar 1:3 (one cement three sand ) 11.50 cm thick using good quality second class chamber burnt bricks of size 9” x 4 3/8” x 2 ¾” including cost of scaffolding , curing finishing etc complete complying with standard specification an as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete co0mplying with standard specification and as directed. c., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Supplying and fixing fine polished cuddapah slab of 40mm thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

FLOOR FINISHING with available old fine polished cuddapah slab over a coat of bitumen at the rate of 38 kg /40 sq. meter over base concrete and laid over cement mortar 1:4(one cement and four sand) of 20mm thick including pointing the semi polished cuddapah slab with cement mortar 1:5:10 to full depth and directed.

FLOOR FINISHING with fine polished cuddapah slab over a coat of bitumen at the rate of 17 kg /10 sq. meter over base concrete and laid over cement mortar 1:4(one cement and four sand) of 20mm thick including pointing the semi polished cuddapah slab with cement mortar 1:3 to full depth and directed. The semi polished cuddapah slab shall be of size 60cm x 45cm for a thickness of 40mm machine cutting on all sides and top surface semi-polished. The Tolerance for thickness shall not exceed + 10%(Rate includes cost of all materials).

Paving the flooring with vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed with same colour pigments etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

White washing two coats with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing etc. complete and as directed by the departmental officers.

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corrugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and laying of High profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

Supplying and roofing of high profile Galvalume sheet ridge pieces of approved quality in size 1:12mx0.90m of 0.50mm tk with necessary U or J bolts and nuts GI washers etc., complete complying with standard specification.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete.,

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Supplying and fixing of plain glass 4mm thick including cost of all materials and labour charges etc., complete, complying with standard specification and as directed by the departmental officers.

Manufacturing supplying and fixing of steel door with the following specification MS angles of size 40x40x6mm are used for the outer frames and M.S angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. Sheet laid as panel in the shutter and welded intact. M.S.flat 18x5mm is welded over the 32x6mm M.S flat sandwitching the C.R sheet in between additional stiffeners with 18x5mm M.S flat is provided diagonally at the rear side of the shutter, 3 nos of hinges in case of single leaf and 6 nos of hinges in double leaves shutter to be provided 6 nos of holdfasts 120mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2 nos one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double lead door at lock rail section in the door in single leaf door, one more adrop in provided in the inner lock rail section of the door one rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place.

Carryout the Renovation works in TNCSC godown campus at Manamadurai in Sivagangai District Dismantling Brick work in cement mortar walls under 3M heigh for any thickness of wall and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

Clean removal of cement plaster from walls and clearing away as directed by the departmental officers.

Chipping the concrete and roughening the surface as directed by the departmental officers.

Dismantling cuddapah slab and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

CEMENT CONCRETE 1:5:10(one cement , five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

BRICK WORK in cement mortar 1:5(One cement, Five sand)using best quality IInd Class chamber burnt Bricks of size 9” x4 3/8 x2 3/4’ for walls including cost of scaffolding curing , finishing etc., complete complying with standard specifications and as directed. In Ground floor upto 4.50M height above basement.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild steel sheets of size 90cm x60cm 10gauge stiffened with welded mild steel angles of size 25mm x 25mm x 3mm laid with country wood joist of average of size 10cm x 6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporation officers. The rates should inclusive of cutting, bending, welding charges of M.S.sheets; M.S.angles etc complete complying with standard specification and as directed. Loading platform vertical wall.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

PLASTERING with cement mortor 1:3 (one cement and three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete co0mplying with standard specification and as directed.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

FLOOR FINISHING with fine polished cuddapah slab over a coat of bitumen at the rate of 17 kg /10 sq. meter over base concrete and laid over cement mortar 1:4(one cement and four sand) of 20mm thick including pointing the semi polished cuddapah slab with cement mortar 1:3 to full depth and directed. The semi polished cuddapah slab shall be of size 60cm x 45cm for a thickness of 40mm machine cutting on all sides and top surface semi-polished. The Tolerance for thickness shall not exceed + 10%(Rate includes cost of all materials).

Supplying and fabrication of M.S Angle section vertical stanction and forming truss used with M.S square/Rectangular pipe and necessary M.S angles for cleat. For purlins M.S square pipe has to be fabricated as per the corporation officers. M.S Angle

Supplying and laying of High profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing etc. complete and as directed by the departmental officers.

Supplying, fabricating and fixing in position M.S.Channel 100x50x6mm at the edge of loading platform with M.S bolt of 16mm dia of 45 cm long protection to the loading platform finishing in flush with the slab with C.M 1:3 complete including painting the exposed surface of M.S Channel with two coats of Anti corrosive mtalic nut brown colour paint over one coat red osixe.

White washing two coats with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Supplying and fixing of plain glass 4mm thick including cost of all materials and labour charges etc., complete.

Supplying and fixing(under lintel grove) cold rolled ROLLING SHUTTERS of approved quality of 18 gauge 7.5 cm wide cold rolled lathe section in one piece interlocked together with specially designed pipe shaft with adequate number of high tensile steel wire springs of approved quality complete with brackets side guides and arrangements for inside and outside locking arrangements with push and pull operations and pulling back handle with all accessories in best workmen ship and the entire shutter painted with two coats of best quality anti-corrosive paint over one coat of red oxide primer and clear opening of 3.0M width 4.50M height. The rolling shutter shall be placed below the lintel and behind the RCC curtain slab of 7.5 cm thick and 45 cm depth. Each rolling shutter shall be provided with one pair of approved quality of ball bearing complete. Rolling shutter should confirm to I.S.6248-1979and should be got approved by the Executive Engineer before fixing .[This specification consists of the following component materials required for erection of rolling shutter.(1).18 G 3" lathe section 1.90M long-29 Nos. (2)10 G guide channel 2.6Mlong-2 Nos.(3).13 G bottom plate for 1.8M long with angle.(4).M.S.pipe 40mm dia. C'class -2M long.(5).10SWG side plate 13"x12"-2 Nos.(6).2 SWG spring 3" bore. (7).'U'-clamp.(8).ball bearing suitable for 2 1/2 "pipe.(9).18 SWG clip suitablefor 4"lathe.(10).20 SWG M.S.sheet. etc.,

Carryout the Renovation works in TNCSC godown campus at Karaikudi in Sivagangai District. Dismantling Brick work in cement mortar walls under 3M heigh for any thickness of wall and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

Dismantling cuddapah slab and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

Dismantling of Plain cement concrete clearing away and carefully stacking materials useful and reuse as directed by the departmental officers.

Dismantling A.C Sheet roofing without timber roofing and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

CEMENT CONCRETE 1:5:10(one cement , five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For Columns footing & Plainth beam.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

BRICK WORK in cement mortar 1:5(One cement, Five sand)using best quality IInd Class chamber burnt bricks size 9”x4 3/8 x 2 3/4’ for walls including cost of scaffolding curing , finishing etc., complete complying with standard specifications and as directed. In Ground floor 4.50M height above basement.

PLASTERING with cement mortor 1:3 (one cement and three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete co0mplying with standard specification and as directed.

PLASTERING with cement mortor 1:5 (one cement and three sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Paving the flooring with vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed with same colour pigments etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and laying of High profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

Supplying, fabricating and fixing in position M.S.Channel 100x50x6mm at the edge of loading platform with M.S bolt of 16mm dia of 45 cm long protection to the loading platform finishing in flush with the slab with C.M 1:3 complete including painting the exposed surface of M.S Channel with two coats of Anti corrosive mtalic nut brown colour paint over one coat red oxide primer etc., complete.

Supplying and fixing in position of false ceiling arrangements with fabricating and erection with huiliz (or) equivalent board upto ceiling height of 4.5m from floor level should be provided for fixing suitable frame work etc., complete.

White washing two coats with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler,` vibratory roller all labour charges etc., complete complying with standard specification and as directed.

HariRam Constructions