SPECIAL REPAIR TO BUILDING NO F-6 AND F-7 AND PROVISION OF CHARRY WITH COVERED SHED ALONGWITH 2X GEYSER WITH CAPACITY OF 100 LITRES EACH FOR TROOPS OF ELM COY AT 15 RR (14 GR) AT BB CANTT, SRINAGAR.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws as specified including dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws asspecified including dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed.

S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee, angle, channel or flat sections) including distance pieces,cleats etc Fe 410-w(Gde-E-250)Quality-A, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described , and applying two coats synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. Note:- Work is to be executed in G+2 roofs.

M&L for Precast cement concrete hollow block masonry type 1:3:6 using (16 mm graded aggregate ) exc. 10 cm in width and setting in mortar complete built in CM 1:6 and Including demolition of brickwork or stone masonary built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., complete all as specifed and directed.

M&L for Reinforced cement concrete (nominal mix), Type B1 1:2:4 (using 20 mm graded crushed stone aggregate) as in Beams, cantilevers, bressumm ers, lintels over 1.5m span including demolition of old RCC, complete all as specifed and directed.

Formwork to sides and soffits of rough flat finished floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specifed and directed.

S&F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specifed and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6, surface to be finished even and smooth without using extra cement, including taking down old cement plaster from brick/stone work, complete all as specified and directed.