Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.4 CrAdmitted-Finance | ₹2.4 Cr | L1 | Admitted-Finance |
| 2 | L2₹2.5 Cr+₹12.0 L (4.96%)Admitted-Finance | ₹2.5 Cr+₹12.0 L (4.96%) | L2 | Admitted-Finance |
| 3 | L3₹2.6 Cr+₹17.0 L (6.99%)Admitted-Finance NO 137 TRICHY MAIN ROAD PIDAGAM POST VILLUPURAM TK 605 401 | VILLUPURAM | VILLUPURAM | TAMIL NADU | 605401 | ₹2.6 Cr+₹17.0 L (6.99%) | L3 | Admitted-Finance |
| 4 | Rejected-Technical NO 172 VAZHAPANTAL ROAD STREET MAMBAKKAM ARCOT TALUK VELLORE DIST 632 318 | MAMBAKKAM | ARCOT TALUK | TAMIL NADU | 632318 | - | - | Rejected-Technical BQR not satisfied |
| Sl No | Description | Qty | Unit | A.H.CONSTRUCTIONS L1 | V.JOTHIKUMARAVEL L2 | K Rajkumar L3 |
|---|---|---|---|---|---|---|
| 1.00 | Providing reinforced cement concrete vertical cast in situ bored pile 600 mm dia of effective length of 8.5m for control room using M 30 design mix concrete and 20mm HBGS jelly metal ISS excluding cost of steel reinforcement, including providing of temporary casing pipe of minimum length of 1m at top using for stablishing the sides of bore holes for the remaining length concreting for this pile shall be done through transit pipes and minimum cement content shall be not less than 400 kg/m3. The reinforcement of the pile must be done upto top level of the pile cap, excluding cost of pile reinforcement. The cost includes mobilisation and de mobilisation of pile equipment as directed by Engineer in charge. | 448 | RM | 3,273 ₹14,66,304 Lowest | 4,000 ₹17,92,000 | 3,700 ₹16,57,600 |
| 2.00 | Empty boring in earth from GL to cut off level (bottom of pile cap).The depth of boring may vary due to site condition as directed by Engineer incharge. | 56.5 | RM | 90 ₹5,085 | 10 ₹565 Lowest | 200 ₹11,300 |
| 3.00 | Single pile under routine load test for safe load of 26 tonnes with a factor of safety of 1.5 times as per ISS-2911 part IV and other relavent codes inclusive of all charges for extension of cutting of piles that may be necessary, erecting and loading the platform in the manner accepted and approved by the Board Engineers together with labour and other incidential charges for loading and unloading the test loads, hire and transport charges and all other incidential charges for conducting the test including retaining the test load for 2 hour at 100% capacity. Testing equipment shall be got tested at contractor's cost and test certificate for pressure guage must be done before taking up the first load test. | 1 | set | 1,50,000 ₹1,50,000 | 1,00,000 ₹1,00,000 | 50,000 ₹50,000 Lowest |
| 4.00Dismantling the following items met with below groung level during execution including labour, tools etc.complete. | ||||||
| 4.01 | Dismantling PCC | 5 | Cu.m | 50 ₹250 Lowest | 100 ₹500 | 500 ₹2,500 |
| 4.02 | Dismantling RCC | 5 | Cu.m | 50 ₹250 Lowest | 5,000 ₹25,000 | 500 ₹2,500 |
| 4.03 | Dismantling brick/ stone masonry in cement mortar | 5 | Cu.m | 50 ₹250 Lowest | 100 ₹500 | 1,000 ₹5,000 |
| 5.00 | Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m in sand , silt or other loose soil,wet sand , or silt not under water,light black cotton soil, sandy loom and ordinary soil including excavated earth | 1,159 | Cu.m | 50 ₹57,950 Lowest | 50 ₹57,950 Lowest | 150 ₹1,73,850 |
| 6.00 | Supplying and filling in foundation and basement with filling sand in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification | 146 | Cu.m | 400 ₹58,400 Lowest | 500 ₹73,000 | 1,000 ₹1,46,000 |
| 7.00 | Re flling in foundation and basement with excavated earth in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification | 621 | Cu.m | 10 ₹6,210 Lowest | 10 ₹6,210 Lowest | 50 ₹31,050 |
Tender Value
Refer Docs
EMD Value
₹2.3 L
Closing Date
27 Aug 2020, 1:00 pmClosed
Chief Engineer
5A Block, TANGEDCO 144, Anna salai, Chennai-600002
Construction of control room building with first floor at Thirumalaivasan nagar 33 KV indoor SS
2020_EB_176131_1
CED/CNR/C102/2020-21
Open Tender
Civil Works
Item Rate
365 days
Chennai
as per BQR in tender specification
2 documents required · 2 mandatory
₹0
₹2.3 L
Yes
11 Nov 2020
21 Aug 2020
28 Aug 2020
21 Aug 2020
27 Aug 2020
21 Aug 2020
21 Aug 2020 - 26 Aug 2020
Amount
Providing reinforced cement concrete vertical cast in situ bored pile 600 mm dia of effective length of 8.5m for control room using M 30 design mix concrete and 20mm HBGS jelly metal ISS excluding cost of steel reinforcement, including providing of temporary casing pipe of minimum length of 1m at top using for stablishing the sides of bore holes for the remaining length concreting for this pile shall be done through transit pipes and minimum cement content shall be not less than 400 kg/m3. The reinforcement of the pile must be done upto top level of the pile cap, excluding cost of pile reinforcement. The cost includes mobilisation and de mobilisation of pile equipment as directed by Engineer in charge.
Empty boring in earth from GL to cut off level (bottom of pile cap).The depth of boring may vary due to site condition as directed by Engineer incharge.
Single pile under routine load test for safe load of 26 tonnes with a factor of safety of 1.5 times as per ISS-2911 part IV and other relavent codes inclusive of all charges for extension of cutting of piles that may be necessary, erecting and loading the platform in the manner accepted and approved by the Board Engineers together with labour and other incidential charges for loading and unloading the test loads, hire and transport charges and all other incidential charges for conducting the test including retaining the test load for 2 hour at 100% capacity. Testing equipment shall be got tested at contractor's cost and test certificate for pressure guage must be done before taking up the first load test.
Dismantling the following items met with below groung level during execution including labour, tools etc.complete.
Dismantling PCC
Dismantling RCC
Dismantling brick/ stone masonry in cement mortar
Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m in sand , silt or other loose soil,wet sand , or silt not under water,light black cotton soil, sandy loom and ordinary soil including excavated earth
Supplying and filling in foundation and basement with filling sand in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification
Re flling in foundation and basement with excavated earth in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification
Transpoting the surplus excavated earth, debris etc away from the site to a lead of 5km including cost of all lead, lift, conveyance , loading, unloading etc.complete
Providing Antitermite treatment in four stages i) Immediately after ewe and before laying of foundation concrete ii) before refilling sides of foundation iii) Before laying of flooring concrete and iv) outside of basement upto 1m alround the building with approved anti termite chemicals as specified by the manufacturer including cost of all materials, lead etc.complete.
Providing and laying PCC 1:4:8 mix using 40mm HBG machine crushed metal for foundation concrete including cost of all labour,materials ,lead ,lift ,curing etc.complete
Laying plain cement concrete M15 nominal mix using 240kg min.cement content for transformer plinth including cost of all materials, lead, lift and labour for laying concrete etc.
Laying RCC in M25 design mix using 12mm to 20mm down graded metal and 400Kg/m3 minimum cement content for various types of work for grade beam, column, footing and column Below G. L., etc., including chipping the piles up to cut off level, complete. (excluding reinforcement)
Foundation and basement
Grade Beam
Base concrete/Raft
Column up to Basement
CAST-IN-SITU
RCC Side wall
Pre-Cast Slab
Waist Slab
Stilt floor beam
Laying reinforced cement concrete in M25 using 12mm to 20 mm HBG and 360 KG of minium cement content for various type of work inculding necessary structting shouttering , formwork, lead lift labour etc complete but excluding cost of reinforcemnt.
Stilt floor
Column (upto stilt floor roof )
Lintel
Sunshade
Staircase Slab
First floor
Column
Lintel & Sill Beam
Sunshade
Staricase Slab
Second floor
Column
Lintel
Roof Slab (Head Room)
Supplying and placing of ready mixed concrete in M25 Grade Mix from reputed suppliers on approval by board engneers for floor slabs , beams with necessary centering and form work incliding cost of all materials conveyance , T&P labour complete (Excluding cost of reinforcement )
Roof beam
Roof Slab
Stilt floor slab
Stilt floor beam
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M30 grade with a minimum cement content of 400 kg per cu.m for pile cap and grade beam under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement for bored cast in situ pile and pile cap.
Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting , bending , tying and fixing in position as per specification including cost of all materials ,lead ,lift ,labour ,cost of binding wire etc.comlete
Brick work in CM 1:4 (one cement & four sand) for partition wall using Fly ash bricks of size 230*110*70mm including finishing ,curing etc.complete complying with standard specification
Stilt floor
First Floor
Second Floor
Brick work in CM 1:5 (one cement & five sand) using Fly ash bricks of size 230*110*70mm including finishing ,curing etc.complete complying with standard specification
Brick work in CM 1:6 (one cement & five sand) using Fly ash bricks of size 230*110*70mm including finishing ,curing etc.complete complying with standard specification
Stilt floor
First Floor
Second Floor Head room
Providing cornice and architectural elevation with Brick work in C.M.1:4using 2nd class ground moulded chamber burnt brick of size 9" X 4 1/2"X 3 " and cement mortar bands as per drawing and as directed by the engineer at site at all levels including cost of all materials,labour etc.complete.
Providing grooves of 25mm in the plastering for architectural elevation works
Supplying and fixing MS angle, channel,, MS rail, etc wherever required as directed by the Engineer as per standard specifcation
MS CHANNEL
MS Flats 75x10 mm for earth plate in XY plane
MS Rail 90LBS
MS Chequer plat 8mm thick
Supplying and fixing MS grill gates ,MS grills, name bord ,hand rail,lader etc.at various levels as per approved drawing using channel, squar rods, ornamentel grill parts and flat including fixing in position with suitable hold fast locking arrangements etc.complete as per standard specification.
Supplying and fixing ornamental steel flowers for MS grill gate including welding as per standard specification
Supplying and fixing of rolling shutter 3.20x2.40 m using 18 swg Tata steel MS sheet with gear operation including locking arrangements on both sides , top hood, guides,gear arrangements ,2Nos godrej navtal locks seven lever, handles, applying metel primer one coat etc.complete as per standard specification.
Name board using of size 2.500 x 1.500 m using 16mm thick MS.sheet board and 0.100 x 0.050 m,Sheet Gripping with 65 x 65 mm m.s. Angle as per plan and letter painting etc., complete.
Supplying and fabrication and fixing in position of anodised aluminium natural colour matt finish sliding window of size 1.18*1.48 m in two track in all floors with following sizes. All the two shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded aluminium section of outer frames as shown below with necessary accessories such as rubber beading , handle,fixing 4mm thick clear sheet glass including all required for fabrication etc. complete. Necessary dimantling making holes in RCC columns , beams, masonry wherever necessary with power drill to the extent required and made good to the original condition after fixing as directed by the dept.Engineer. The Al. surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI 1868/1962 specification for an average anodic film thickness of not less than 15 microns. ( All materials should be got approved by the Executive Engineer) before fixing in position.
Supplying and fixing in position of aluminium anodised colour matt finish fixed type Ventilator of size 1.18x0.58m Ntype in anodised aluminium rectangular type 63x37at 0.85kg/m with 4mm thick clear glass and aluminium mesh fixed with aluminium beading of size 17.15x17.27 at 0.178kg/m fixing rubber lining etc. including cost of all materials ,lead, lift and labour for fabricating and fixing in position including drilling RCC beam,column, etc complete. Aluminium frame is to be anodised with matt finish under the electrically controlled condition in accordance with ISS 1868/ 1962 specification for an average anodised thickness not less than 15 microns and as directed by the engineer at site.
Supplying and fixing in position of aluminium anodised natural colour matt finish Louvered Ventilator of size 0.92x0.58m. The outer frame will be 62x38x2mm @ 1.17 Kg / m and the louvers with moving arrangements will be made with Alu. Channel of size 60x30x4 mm @ 1.27 kg /m with pans of louvers 4mm thick Al.clips including all materials , labour and power consumption chages required for fabrication if necessary chipping ,dismantling , making holes in RCC columns ,beams,or masonry wherever necessary with power drill to the extent required and make good to the original condition after fixing etc.complete.The Al.surface is to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness of not less than 15 microns for all sections and as directed by the engineer at site.
Supplying & fixing cw doors with outer frame of size 100x75 mm and door shutters Solid core flush shutters with teak ply on both side with teak wood lipping alround 35mm thick with necessary adhesive and CP screws complying with standard specification . The rate inclusive of three coats of best quality varnish but including cost of furniture fittings such as 300 mm tower bolt 2 Nos. 200 mm tower bolt 1no. 300mm aldrop 1No.Aluminium arnamental handle 2 Nos.and 1No.door stoper etc.complete
CW door 3.60x2.10m
CW door 1.18x2.10m
CW door 0.90x2.10m
PVC door 0.75x2.10m
Supplying and fixing in position of Sun control film in glazed windows of approved quality and brand including cost of all materials, lead, labour etc.complete.
Plastering in cm 1:3 mix 12mm thick for bottom of roof slab,bottom and slides of sunshade partition walls etcincluding cost of all materials ,lead, lift,watering,curing etc complete
Plastering with cm 1:4mix using 20mm thick for Partition walls including cost of all materials,labour,lead, lift etc complete
Plastering with cm 1:5 mix using 20mm thick for inside and outside walls, plinth protection including cost of all materials,labour,lead, lift etc complete
Paving the control room floor with industrial floor tiles (Industrial type floor of johnson endura make , quality, colour and shade as directed by the engineer at site) of size 300 mm x 300mmx10mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement mortar neatly finished as per standard specification .
Supplying and fixing of prepolished hydraulic pressed non-skid, vibrated concrete tiles of approved design and colour 18mm thick set in cm 1:3, 10mm thick for steps etc., including cost of all materials, paving charges to uniform level and slope, transporting, stacking, curing, etc., complete as per direction.
Paving the floor with acid resistant tiles (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 6 mm in battery room over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement
Dadooing walls with glazed tiles of best approved quality of make Johnson ,neycer etc over cm 1:3 12mm thick including cost of all materials,labour ,lead,lift etc complete
Paving the floor with Antiskid tiles for toilets (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 6 mm in battery room over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement
Finishing the top of floor with Granolithic Finish with CC 1: 2: 3 (one cement Two sand & three HBS jelly) 50 mm thick using chips of grade 10 mm and below and rubbed smoothly
Providing horizantal / vertical decorative mortar bands in CM 1:3, 20mm thick to uniform level and neat finish including cost of all materials ,scaffolding , lead,lift etc.complete.
150 mm width
100 mm width
75mm width
Providing weathering course with one course of pressed tiles of size 23*23*2 cm embedded in cm 1:3 12mm thick and pointed with same mortar mixed with crude oil 10% weight of cement used over bed of brick jelly,lime concrete of 80mm thick with ratio of 32:12.5 and well beaten with wooden hammers spraying lime mortar, kadukkai and jaggery solution as per standard specification including cost of all materials ,labour, lead ,lift etc complete.
Providing & fixing PVC RAIN WATER DOWNFALL pipe of the following dia with necessary Twclamps , plugs , shoes, bends,other clamps,screws,nails etc. etc complete complying with standard specification . The rate is inclusive of cost of removable iron grating
Supplying and fixing of wash basin of size 500*400mm of approved quality Neycer / Parrys ISI including cost of wash basin with pedastal cock fixing using rag bolt and nut 15mm dia PVC connection hose and outlet using 50mm dia pipe waste water pipe for outlet including cost of all material,labour etc.complete.
Supply and fixing in position of Indian make white/ Colour glazed earthen ware lipped mouth flat back urinal basin of best approved quality of size 450mm with GI pipe connection to suitable length ,32mm bell mouthed PVC connection ,20mm dia GM wheel valve fixing the urinal to the wall including cost of all material,labour etc.complete.
Supplying and fixing in position white glazed European water closet of approved make with 100mm P trap or S trap with double flapped regid PVC seat cover with CP brass hinges with 12.5 litres PVC low level flushing tank with all internal fitting etc.complete complying with standard specification, labour inclusive of fixing low level flushing tank and as directed by the engineer at site.
Supplying and fixing white marble stone of size 600*1200mm, 20mm thick for partition to urinals including cost of all materials , lead lift,etc complete.
Supplying and fixing in position PVC Nahini trap with Stainless steel gratings of various size with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime , two parts of sand and five parts of brick jelly .
Supplying and fixing in position C.I.Manhole cover 600X600 heavy duty of best approved quality and as per standard specification etc. complete
Supplying and fixing in position RCC Prefabricated Manhole covers 600X600 of best approved quality and as per standard specification etc. complete
White washing with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed.
Painting 2 coats with approved Plastic Emulsion paint over one priming coat of plastic emulsion paint over cement plastered wall surface, ceiling and other new surface and including cleaning ,preparing the surface and curing etc.complete.
Colour washing two coats of approved oil bound distember over one coat of white cement primer for inside control room wall including cost of all materials labour lead lift etc complete.
Painting new wood work with two coats of synthetic enamel paint of approved quality and colour over a priming coat including cost of all materials etc complete.
Painting new iron works with two coats synthetic enamel paint over one coat of primer including cost of all materials , lead,lift etc complete.
Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification.
PVC Pipe 140mm dia. 6kg/ sq.cm for bore well
PVC Pipe 140mm dia. 6kg/ sq.cm for bore well strainer pipe with slotted holes
PVC Pipe 110mm dia. 6kg/ sq.cm
PVC pipe 75mm dia 6kg/ sq.cm
PVC pipe 63mm dia 6kg/ sq.cm
PVC pipe 50mm dia 6kg/ sq.cm
PVC pipe 40mm dia 10 Kg/Sq.cm
PVC pipe 32mm dia 10 Kg/Sq.cm
PVC pipe 25mm dia 10 Kg/Sq.cm
PVC pipe 20mm dia 10 Kg/Sq.cm
PVC pipe 15mm dia 10 Kg/Sq.cm
PVC ASTM Threaded pipe 32mm dia 15 Kg/Sq.cm for Borewell
PVC ASTM Threaded pipe 25mm dia 15 Kg/Sq.cm for Borewell
Supplying and fixing GM wheel valve of approved brand (leader ) ISI quality including cost of all materials, labour etc.complete
Supplying and fixing of Specials of approved brand (leader ) ISI quality including cost of all materials, labour etc.complete
40mm union
32mm union
25 mm union
Supplying and fixing best quality of belgium mirror of size 600*450 mm with soap tray towel stand screw and fixing near the wash basin with two round block including cost of all materials,lead ,lift etc complete
Supplying and fixing of approved quality of aluminium towel rod with powder coating of size 90 cm and fixing the same over teak world round block and soap tray (PVC) in bath room including cost of all materials,lead,lift ,etc complete
Supplying and fixing of SINTEX pvc water tank of 1000 litres capasity with necessary specials and fittings including cost of all materials , lead lift etc complete
Supplying and fixing ornamental hand rail for front ramp portion in stainless steel 50mm dia at top and 25mm dia two runs at middle and 25mm dia for verticals at every 1000mm c/c including cost of all materials ,lead, etc.complete. For GF and FF
Fixed type
Removable type
Conducting Geophysical survey to assess the availability of ground water and to locate the place of bore well
Drilling borewell in hard rock 150 mm dia using power rig equipments including hire charges for power rig, labour etc.complete
Supplying and filling with pebbles for annular space bet. Strainer pipe and earth surface including cost of all materials, lead,lift etc.complete.
Flushing the borewell with power rotary flushing eqipement including mobilisation and demobilisation etc.complete.
Supplying and erection of 1.5HP Texmo/ Kirloskar / sharp/ Suguna make jet pump with all accessaries , suitable L&T/ Siemens starter , L& T main switch , fuse,foot valve , etc. including cost of all materials as directed by the engineer at site, commissioning etc. complete.
Supplying and erection of 1.0HP Texmo/ Kirloskar / sharp/ Suguna make Monoblock pump with all accessaries , suitable L&T/ Siemens starter , L& T main switch , fuse,foot valve , etc. including cost of all materials as directed by the engineer at site, commissioning etc. complete.
Providing 300mm dia flower pots containg green plants as directed by the engineer
Supplying and fixing of ornamental design terracotta jolly in passage including cost of all materials ,transportation ,scaffolding and fixing in position using same colour mortar, lead lift etc.complete.
Supplying and fixing in position of Aluminium dye cast powder coated letters of various sizes and emblem in 12mm thick as per the requirement of Board including cost of all materials,aluminium letter, emblem, scaffolding etc. complete as directed by the engineer at site.
TNEB Emblem 90 cm size letters
45cm size letters
30cm size letters
23cm size letters
Providing two legged scaffolding using 15cm dia-meter blue-gum props or casurina props or best quality bamboo props of 4m overall length (3m height + 0.5m.in to the ground +0.5m projection) the distance between the two rows being 1.25m, and the spacing of props being 2m, in both the rows with two horizantal props with 0.5m overlap on either side and braces at 2m, c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm, thick and 1m width, etc., in a complete form using coir and nails -
Supply and erection of RCC pre cast well rings of dia 1200mm, 300mm height and 50mm thick for construction of Rainwater Harvesting tank, Septic tank and Soak pit including cost of well rings, brick jelly, stone jelly 40,20,12,10mm and sand, etc., lead, lift, erection charges, labours etc., complete, as per direction and specification.
Supply and erection of well rings for Rain water harvesting, Septic tank,and Soak pit
Supply and fixing of top cover
Exhaust fan rings 450mm dia
Exhaust fan rings 300mm dia
Supplying, spreading, filling, watering, consolidation of well gravel, labour for consolidation, watering, lead, lift etc., complete.
Providing and laying in position of PCC 1:2:4 using 3 to 10 mm HBG including cost of all materials, labour, lead, lift, curing, shuttering charges at all levels wherever necessary as directed by Engineer-in-charge.
Providing granular sub-base by providing grade-I material by (MIX IN PLACE METHOD ) spreading in uniform layers on prepared surface mixing by mix in place method at OMC and compacting with Vibatory roller to achieve the desired density,including all labour charge etc.,complete as per clause 401 MORT & H specifications.
Supplying and providing AC exhaust fan 450mm (18") sweep (Light duty) with necessary 15 ams switch and required wire including the cost of all materials, leads,lift,labour complete
SGST For bidders within Tamilnadu
CGST For Bidders within Tamilnadu
IGST For Bidders outside of Tamilnadu
V.JOTHIKUMARAVEL
K Rajkumar
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .