GEK-45/2020-21

Amount

Schedule 'A' Section - I

Out sourcing of E/M complaint cell at Kasauli Mil Station with deployment of one electrician and one helper in one shift per day (each shift of 08 Hrs). The Shift timing for the month during contract period shall be directed by Eng-In-Charg. The contractor will adhere time schedule for function shall as directed by Eng-In-Charge. The above deployed staff shall do the following routine complaints:- (a) Attending complaints for checking the existing electrical items for continuous electric supply including carrying out minor repairs etc as required to make the item functional and replacing fuse, small pieces of copper wire, copper cable as of suitable size at site, insulation tape roll etc., Attending minor repairs such as testing, connections, fittings, nut, bolts screws etc to ceiling fan, exhaust fan (without taking down) etc,emergent complaints i.e. no light, earth leakage, short circuit, neutral break in mains/ sub mains/ internal circuits of existing electrical system of main building/ block and making continuous electric supply including carrying out minor repairs etc. required to make the system in order/ functional with insulation tape roll, copper thimbles, glands, earthing wire as required at site complete all as specified and directed by Engineer-In-Charge (this will be included in unit rate). (b) The material required for attending daily complaints/ internal electric work shall be issued to the above tradesman by the department. Notes:- (i) The complaint for "No Light" shall be attended immediately/ On Priority. (ii) In case the trademen found absent recovery shall be charged as below:- (a) upto 2 Hrs @ Rs 250/- (b) Exceeding 2 Hrs upto 8 Hrs @Rs 800/- (iii) Complaint register, complaint slip, pen, gum bottel etc will be provided by the contractor for keeping record of complaints without any extra cost. (iv) The contractor will ensure that the team of electricians with necessary tool bag shall always remain present at compaint cell to attend the compaints/ internal electric work as per requirement. (v) The contractor will provide suitable reliver (Tradesman) during weely rest of employed electrician and helper without any extra cost to department.

Supply only switch piano flush type (ISI marked) single pole one way, 5/6 Amps, 240 Volt.

Supply only socket outlet 2-in-1 5 pin,5/6 Amps flush type .

Supply only switch piano flush type (ISI marked), single pole, 2 way 5/6 Amps, 240 Volts .

Supply only switch piano flush type (ISI marked) single pole one way, 15/16 Amps, 240 Volt .

Supply only socket outlet 2-in-1 5 pin, 6 & 16 Amps flush type 240 Volts (ISI marked).

Supply only Switch socket combination 2 in 1,3 pin,5 and 15 Amp flush type, 240 Volts (ISI marked) .

Supply only bell push 5/6 Amps SP flush type 240 Volts (ISI marked) .

Supply only switch modular flush type 5/6 Amps 240V AC (ISI marked) complete one way

Supply only socket 2 / 3 pin, 6 Amp modular flush type 240V AC (ISI marked) .

Supply only socket and Switch combination modular type 5 PIN 16 Amp 240 volts AC (ISI marked) .

Supply only bell push modular 5/6 Amps 240 V AC (ISI marked) .

Supply only 1 Module grid frame with cover including blank plate

Supply only 3 Module grid frame with cover including blank plate

Supply only 4 Module grid frame with cover including blank plate

Supply only 6 Module grid frame with cover including blank plate

Supply only 8 Module grid frame with cover including blank plate

Supply only PVC plug top 5 Amp, 240 Volts , for three wires (ISI marked) .

Supply only PVC plug top 15 Amp, 240 Volts, for three wires (ISI marked).

Supply only 1 way PVC gang Box suitable for 6 Amp bell push (ISI marked).

Supply only 3 way PVC gang Box suitable for 6 Amp socket and 6 Amp switch (ISI marked).

Supply only 3 way PVC gang Box suitable for 16 Amp socket and 16 Amp switch (ISI marked).

Supply only flexible conduit ISI marked of size 25 mm .

Supply only ceiling rose surface, backelite, three terminal, 240 volts .

Supply only angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings .

Supply only bell electric AC 240 volt, 50 Hz.

Supply only LED tube light fitting for 18 Watt, 4 feet, 230V, self ballasted LED Batten, Extruded thermoplastic body with PC diffuser, PF min 0.95.

Supply only wall mounted Mirror light LED fitting 12Watt, 2 feet, 230V, self ballasted LED Batten, Extruded thermoplastic body with PC diffuser, PF min 0.95.

Supply only surface mounted LED Bulk head fitiings 10 Watt luminaire with ABS body & polycarbonate diffuser , 230V, PF min 0.95.

Supply only self ballasted LED retrofit Bulb 5 Star Bulbs 9 Watt with PBT body shell and PC diffuser , 210 degree wide distruction CCT 6500K , B-22 cap, (PinType , ,230 V pf-0.95 (min)

Supply only self ballasted LED retrofit Bulb 3 Watt with PBT body shell and PC diffuser , 210 degree wide distruction CCT 6500K , E-14 cap, (Thread Type , ,230 V pf-0.95 (min)

Supply only self ballasted LED retrofit Bulb 3 Watt with PBT body shell and PC diffuser , 210 degree wide distruction CCT 6500K , E-27 cap, (Thread Type , ,230 V pf-0.95 (min)

Supply only energy saving LED Building security light 18 W 5700K 240 W. One GI medium grade 25 mm dia bracket of total length 50cm incl 2 Nos MS Clamp and fastner. Make of light :- Crompton or equivalent make as per Appx B att.

Supply only surface mouted 6 Watt LED Focus/spot light for the picture, fittings luminaire with ABS body & Polycarbonate diffuser, IP 54, PF Min 0.95 . Make :- Havells or equivalent make as per Appx B att.

Supply only Recess mounting ceiling fitting 2'X2' LED 36 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser. Separate HPF driver. Suitable for Armstrong and Grid ceiling, PF min 0.95 . Make :- Havells or equivalent make as per Appx B att.

Supply only indicators lamp round /rectangular type for any type or size capacity (As per Sample) for Geyser.

Supply only Heating Element ISI Marked round/ tringular base, push type or thread type including rubber washer for 1.5/2.0 KW suitable for geysers 25 Ltrs to 50 Ltrs capacity (as per existing sample).

Supply only thermostat ISI Marked suitable for geysers 25 Ltrs to 50 Ltrs capacity (as per existing sample).

Supply only Cromium plated connections 45 Cm long for Hot/Cold water of 15mm size with nuts and washsers. Make : Polycab/Prayag/Polytuff

Supply only insulated flexible multi strand copper conductor nominal area 4 Sqmm, 3 core

Supply only electrical operated single phase, water storage heater (Geyser) of capacity 25 Ltrs with Ultra Dimond Glass line coated with magnesium rod, 8 bar working (Heavy Duty) heating element with fastners- 04 Nos including bolts washers . Make :- Crompton or equivalent make as per Appx B att.

Supply only Exhaust Fan 300mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH . Make :- Crompton or equivalent make as per Appx B att.

Supply only Exhaust Fan 250 mm Sweep ,1400 RPM plastic body . Make :- Crompton or equivalent make as per Appx B att.

Supply only electric insulation tape heavy duty 25m long and 25mm wide complete all as per specifed and directed

Supply only 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor ,served with inner sheating of PVC tape and overall PVC sheathed in sercive connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire ,one twin core cable of size 10.0 sqmm compete.

Supply only 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor ,served with inner sheating of PVC tape and overall PVC sheathed in sercive connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire ,one twin core cable of size 16.0 sqmm compete.

Supply only Surge Protection Devices Type 2, I(max), 40kA, 1P+N conforms to IEC 61643-11 protection against indirect lightning and switching surge . Make :- Cat Ref AUSP021PN40 in L&T or equivalent in Legrand/Hager

Supply only Surge Protection Devices Type 2, I(max), 40kA, 3P+N conforms to IEC 61643-11 protection against indirect lightning and switching surge incl cutting/addition/altration with all accessories Make :- Cat Ref AUSP023PN40 in L&T or equivalent in Legrand/Hager

Supply only electric meter and deposit to E/M store and S&F for enrgy meter electronic type 2 wire static energy meter 10 - 60 Amps single phase Make : HPL/L&T/Schenider

Supply only MCB DB TPN 4 way double door, IP 42, CRCA sheet powder coated vertical type factory made suitable for incorporating MCB as out going and MCCB as incoming including connecting incoming and outgoing cables & blaking plate as required. Make : ABB or equivalent make as per Appx B att.

Supply only MCB DB SPN 4 way double door, IP 42, CRCA sheet powder coated, factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required. Make : ABB or equivalent make as per Appx B att.

Supply only MCB DB SPN 8 way double door, IP 42, CRCA sheet powder coated factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required. Make : ABB or equivalent make as per Appx B att.

Supply only MCB DB SPN 12 way double door, IP 42, CRCA sheet powder coated factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required .Make : ABB or equivalent make as per Appx B att.

Supply only MCCB TPN 63 Amps, 10 KA 240 Volt, 50 Hz, IS/IEC 60898-1, 'C' curve . Make : ABB or equivalent make as per Appx B att.

Supply only MCB SP 6 Amp to 32 Amp 10 KA, 240 volts, IS/IEC 60898-1, 'C' curve . Make : ABB or equivalent make as per Appx B att.

Supply only MCB SPN 32 Amp to 40 Amp, 10 KA, 240 volts, IS/IEC 60898-1, 'C' curve . Make : ABB or equivalent make as per Appx B att.

Supply only Single pole and neutral enclosure with a two pin and earth plug and socket board with IS 13032, IS 8623 complete with one single pole 20 amp MCB Make : ABB or equivalent make as per Appx B att.

Taking down carefully aluminium/ copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator, ceiling rose etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

M & L for point wiring using approved colour coding as per IS with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing-N-caping of size 20/25mm with all fittings and accessories alongwith sunken box 1.5mm steel sheet including 3mm thick hylam sheet properly cut for fixing switches and sockets etc incl PVC insulated and unsheathed stranded copper conductor single core of size 1.5 sqmm as earth continuity conductor to common earth and connecting to earth dolly(switches and sockets to be measured and paid separately) screwed with 04 nos cadmium coated screws & cup washer for mounting of switch, socket all as specified and directed for the following :-

One Light/Fan/Bell point controlled by one switch 5/6 Amp.

One switch socket outlet 3 pin, 5/6 Amp on the independed board

One switch socket outlet 3 pin, 5 Amp on same board

One light point controlled by two way switch.

M & L for point wiring using approved colour coding as per IS with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC conduit of size 20/25mm with all fittings and accessories alongwith sunken box 1.5mm steel sheet including 3mm thick hylam sheet properly cut for fixing switches and sockets etc incl PVC insulated and unsheathed stranded copper conductor single core of size 1.5 sqmm as earth continuity conductor to common earth and connecting to earth dolly(switches and sockets to be measured and paid separately) screwed with 04 nos cadmium coated screws & cup washer for mounting of switch, socket all as specified and directed.

M & L for point wiring for power point controlled by one switch 15 Amp switch independent using approved colour coding as per IS with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4 sqmm (Nominal area) drawn in and including PVC casing-N-caping of size 20/25mm with all fittings and accessories alongwith sunken box 1.5mm steel sheet including 3mm thick hylam sheet properly cut for fixing switches and sockets etc incl PVC insulated and unsheathed stranded copper conductor single core of size 4 sqmm as earth continuity conductor to common earth and connecting to earth dolly(switches and sockets to be measured and paid separately) screwed with 04 nos cadmium coated screws & cup washer for mounting of switch, socket all as specified and directed .

M & L in replacement sub main wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC conduit of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and light grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete ass as specified and directed Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

Amount of credit of Rs. 5,450.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

Vasudeva Trading Co.

Varindera And Varindera Construction

Pankaj Traders