WBPWD/SE/SWEC/NIQ71/2024-25

Amount

Supply & delivery of 8.0 Mtr Hot Dip Galvanized (86-65 micron dry film thickness) Octagonal Pole, as per BSEN 10025; ASTM A572; IS 5986: IS 4759/2629, ASTM A123 and BSEN IS 1461 standard. The pole should be 8.0 Mtr long, bottom dia-135 mm, top dia-70 mm, thickness-4mm, continuously tapered and shall have octagonal cross section with pole cap at top, necessary cleat attachment/hanger for arm brackets. Base-plate having dimension 275x275x16 mm (minimum) and 4 nos 'J'-Type foundation bolt with double nut and plate washer, bolt dia 24mm , PCD- 300 mm ,bolt length- 750 mm/500 mm, Projected bolt length - 125 mm( these dimension are subjected to tolerance as per IS-2102 except for bending radius).

The pole will consist of a built-in loop-box having one 32A 4-terminal stud type connector, one 250V 5A kit-kat fuse unit, one NL on porcelain insulator, it permits clear access to equipment like winches, cables, socket, etc and also facilitate easy removal of the winch. The door opening shall be complete with a closefitting, vandal resistance, weatherproof door( to IP-55 of IS:2147), providing with a heavy duty double internal lock with special paddle key. The door opening shall be carefully designed and reinforced with welded steel section , so that the mast section at the base shall be unaffected and undue buckling of the cut portion is prevented. The Pole should be supplied with adequate templates for the purpose of construction of base foundation. The pole should have earthing terminals 02(two) nos at a height of 600 mm from the base plate for connection of earth continuity wires/ conductors. ( Make : Bajaj/Surya/Utkarsh) [NS] * TC & WC must be submitted to the EIC before execution ** OEM declaration or authorization need to be provided at the time of tender submission from power of attorney holder or authorized signatory not below of Zonal Head

Erection of 8.0 Mtr octagonal GI (Hot Dip Galvanized in single dip) pole 1.6 Km from the store to work-site with foundation of M20 grade concrete for 8.0 Mtr GI Octagonal Pole with all the materials like sand, cement, stone chips, reinforcement steel, binding wire etc as relevant IS Code. by PCC Base foundation having (L-1000mm x W-1000mm x H-100mm) & RCC foundation having dimension (L-600mm x W-600mm x H-1600mm) including neatly cemented finish (3mm thick) partly below and above ground level. There should be multiple alkathene pipes upto 1.2 mtrs of 50 mm dia of adequate length for distribution of incoming & outgoing cables for street light wiring as directed by EIC in the CC foundation of octagonal poles. *[Erection and commissioning job strictly as per approved manufacturer's drawing and written guidance of EIC, PWD]

Erection of 8.0 Mtr octagonal GI (Hot Dip Galvanized in single dip) pole 1.6 Km from the store to work-site with foundation of M25 grade concrete for 8.0 Mtr GI Octagonal Pole with all the materials like sand, cement, stone chips, reinforcement steel, binding wire etc as relevant IS Code.by RCC foundation having dimension (L-300mm x W-300mm x H-400mm) including neatly cemented finish (3mm thick). There should be multiple alkathene pipes upto 0.5 mtrs of 50 mm dia of adequate length for distribution of incoming & outgoing cables for street light wiring as directed by EIC in the CC foundation of octagonal poles.Also provide 2 nos adequate length 24mm dia U Bolt for extra support from wall.(for Bridge portion) [NS] * [Erection and commissioning job strictly as per approved manufacturer's drawing and written guidance of EIC, PWD]

Supply & Fixing of Hot Dip Galvanized (86-65 micron dry film thickness) 1.5 Mtr long Sword type/ Swan neck Single Arm bracket made of 40NB Pipe with ball and Dome, as directed by EIC.(As per IS 5986: IS 4759/2629, ASTM A123 and BSEN IS 1461 standard.) ( Make : Bajaj/Surya/Utkarsh) [NS]

Supply of 150 W Street Light, Lumen Efficacy >140 , CRI>70, CCT-5700K, IP- 66, Aluminum Dia Cast Housing , Potted driver, toughend glass, 4KV Internal 10 KV external SPD, min 50000 burning hours@,L70B50, having LM79, LM80 reports must be provided from NABL accredited Lab. Make of SMD type LED chip: Cree, Nichia, Osram, Lumileds. Luminaire should be engraved or embossed with manufacturer's logo and must have 5 year• warranty from OEM. OEM declaration or authorization need to be provided at the time of tender submission from power of attorney holder or authorized signatory not below of Zonal Head and warranty certificate shall be provided on OEM letterhead at the time of material supply.Report shall be provided from manufactures own NABL Lab, (5 years of Warranty & Light efficacy will not get depreciated less than equal to 70% of the rated value over the lifetime of the Luminaries) [Make : Wipro / Philips / Surya] [NS]

Supply & Laying of 3 core 1.5 sqmm of 1.1 KV grade Copper XLPE Non armoured cable.( For Inter connection between Loop box to fittings) as directed by EIC. [Make : Gloster / Havells / RR Kabel]

S&F Vibration Dampers suitable for both Swan neck and diffental type arm bracket of size 48.3mm dia for protection the luminaries from the vibration of the Bridge.

Supply & Delivery of 4 core 16 sqmm of 1.1 KV grade alluminium XLPE Al. armoured LT cable, as directed by EIC. [Make : Gloster / Havells / RR Kabel] [NS]

Supply & Delivery of 4 core 10 sqmm of 1.1 KV grade alluminium XLPE Al. armoured LT cable, as directed by EIC. [Make : Gloster / Havells / RR Kabel] [NS]

Supply & Delivery of 4 core 25sqmm of 1.1 KV grade alluminium XLPE Al. armoured LT cable, as directed by EIC.[Make : Gloster / Havells / RR Kabel] [NS]

Laying only above 4 core 16sqmm cable through existing RCC/Hume/ GI Pipe/open masonry trench, as per GS.[F-1/3(A)]

Laying only above 4 core 16sqmm/25sqmm cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed, as per GS.[F-2-1(a)]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :[F-4/7(C )]

4 Core 10 Sq.mm

4 Core 16 Sq.mm

4 Core 25 Sq.mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

4 Core 10Sq.mm [F-5-8(b)(xii)]

4 Core 16 Sq.mm [F-5-8(b)(xii)]

4 Core 25 Sq.mm [F-5-8(b)(xiii)]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire [Make : Gloster / Havells / RR Kabel] of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x 22/0.3 (1.5 sqmm), as per GS. [E-9-C-1(a)]

Supply of 12.5 Mtr High Mast, 3.3 shaft thickness in two sections, Top A/F 150, Bottom A/F 360 , Base Plate 520 (O/D)x25 dimension as per manufacture design to suitable for wind speed 180 Km/hr. as per IS:875 with head frame, luminaries carriage suitable to install 6 no. 150-250W led flood light fixtures lightning finial along with the other accessories like double drum winch, 6mm diameter 2 Rope system SS wire rope, trailing cable 5cx2.5 sq mm , connector, integral power tool motor, manual handle, junction box A) Material grade of shaft shall be of S355JO/JR as per BSEN 10025 or Equivalent IS: 2062 grade E350 (BR) B) Materials grade of Base Plate shall be E250(BR) as per IS:2062 Galvanization as per BSEN ISO:1461 [Make Bajaj/Valmont/Transrail] * TC & WC must be submitted to the EIC before execution ** OEM declaration or authorization need to be provided at the time of tender submission from power of attorney holder or authorized signatory not below of Zonal Head

Supply of 6 No.M24X 750 “J” foundation bolts as per EN8 Grade (Ts-600) manufactured from special steel along with nuts, washers, anchor plates and templates

Supply of LED Single Dome Avaition Lamp

Supply of outdoor stand mounted feeder pillar (IP66) with 32A TPN MCB incomer, with austronomical digital timer arrangement (as per approved drawing by EIC), 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 16A contactors and raise lower push button, Incoming 35 sq. mm and outgoing 16 & 2.5 sq. mm terminals.

Construction of suitable Shallow foundation for 12.5 Mtr. High Mast with M-25 grade concrete for solar mini mast considering soil bearing capacity (SBC) 10T/sq. mtr. at 2 Mtr. depth with all materials and labour and payment made as per PWD civil schedule & as per direction of EIC.

Erection , Testing and commissioning of 12.5 Mtr. Mast and Feeder Pillar by using of lifting equipment like hydra etc. and fixing and wiring of Luminaires with 3cx2.5 sq mm flexible cable , 32 Amps 4 Pole MCBc etc. with necessary arrangement with labour cost

Supply & Delivery of 240V, 250 W LED Flood light luminarie with pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection and BIS approved silicon filled potted driver for vibration proof. 4 KV internal and 10KV external SPD included efficacy >= 140/LPW with all accessories Luminaire should be engraved or embossed with manufacturer's logo and must have 5 year• warranty from OEM. OEM declaration or authorization need to be provided at the time of tender submission from power of attorney holder or authorized signatory not below of Zonal Head and warranty certificate shall be provided on OEM letterhead at the time of material supply.Report shall be provided from manufactures own NABL Lab, (Make- Crompton Geaves-Cat no.-CFS-506-250-57-60D-SL-GL-NSG or equivalent make & Model of Philips/Havells) as per direction of E.I.C. (5 years of Warranty & Light efficacy will not get depreciated less than equal to 70% of the rated value over the lifetime of the Luminaries)

Supply of 16 Mtr High Mast, 4.3 shaft thickness in two sections, Top A/F 150, Bottom A/F 410 , Base Plate 570 (O/D)x25mm thick dimension as per manufacture design to suitable for wind speed 180 Km/hr. as per IS:875 with head frame, luminaries carriage suitable to install 6 no. 150-250W led flood light fixtures lightning finial along with the other accessories like double drum winch, 6mm diameter 2 Rope system SS wire rope, trailing cable 5cx2.5 sq mm , connector, integral power tool motor, manual handle, junction box A) Material grade of shaft shall be of S355JO/JR as per BSEN 10025 or Equivalent IS: 2062 grade E350 (BR) B) Materials grade of Base Plate shall be E250(BR) as per IS:2062 Galvanization as per BSEN ISO:1461 [Make Bajaj/Valmont/Transrail] * TC & WC must be submitted to the EIC before execution ** OEM declaration or authorization need to be provided at the time of tender submission from power of attorney holder or authorized signatory not below of Zonal Head

Supply of 8 No.M30 X 850 “J” foundation bolts as per EN8 Grade (Ts-600) manufactured from special steel along with nuts, washers, anchor plates and templates

Supply of LED Single Dome Avaition Lamp (two nos)

Supply of outdoor stand mounted feeder pillar (IP 66) with 32A TPN MCB incomer, with austronomical digital timer arrangement (as per approved drawing by EIC), 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 16A contactors and raise lower push button, Incoming 35 sq. mm and outgoing 16 & 2.5 sq. mm terminals.

Construction of suitable Shallow foundation for 16 Mtr. High Mast with M-25 grade concrete for solar mini mast considering soil bearing capacity (SBC) 10T/sq. mtr. at 2 Mtr. depth with all materials and labour and payment made as per PWD civil schedule & as per direction of EIC.

Erection , Testing and commissioning of 16 Mtr. Mast and Feeder Pillar by using of lifting equipment like hydra etc. and fixing and wiring of Luminaires with 3cx2.5 sq mm flexible cable , 32 Amps 4 Pole MCBc etc. with necessary arrangement with labour cost

Supply & Delivery of 240V, 300 W LED Flood light luminarie with pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection and BIS approved silicon filled potted driver for vibration proof. 4 KV internal and 10KV SPD included efficacy >= 140/LPW with all accessories Luminaire should be engraved or embossed with manufacturer's logo and must have 5 year• warranty from OEM. OEM declaration or authorization need to be provided at the time of tender submission from power of attorney holder or authorized signatory not below of Zonal Head and warranty certificate shall be provided on OEM letterhead at the time of material supply.Report shall be provided from manufactures own NABL Lab (Make- Crompton Geaves-Cat no.-CFS-506-300-57-60D-SL-GL-NSG or equivalent make & model of Philips/Havells) on existing Pole as per direction of E.I.C. (5 years of Warranty & Light efficacy will not get depreciated less than equal to 70% of the rated value over the lifetime of the Luminaries)

Supply & Laying 3 core 4.0sqmm flat cu Cable (Finolex/Havells / Gloster / RR Kabel) for high mast inter connection incl. connector [NS]

SITC of outdoor type water proof Distribution Feeder Pillar box conforming to Indian Standard IS : 5039- 1969 with latest amendments,suitable for use on 3 phase 4 wire, 400/440 Volts 50 Cycles A.C. Supply and shall be suitable to be fabricated as per design & drawing to be approved by EIC. The Enclosure shall provide Degree of protection IP -66 respective Indian standard (IS). [Manufacturer/Fabricator having Test Certificates from CPRI] The body will be fabricated with 3mm thick MS plate, MS angle ( 50X50X5) & MS Flat ( 50X6 ). The top of the box will be fitted with a sloping canopy made out of 3 mm thick sheet steel. It will have double hinged door at the front and back with suitable locking arrangement (Godrej Type ) and provision for manual locking arrangement also.

Incoming arrangement - i) 415 V 63 A TPN SFU with sheet steel enclosure with nuts bolts with S&F 3 Din-Type HRC fuse on angle iron frame on wall as per rating including power coated painting on it :- 1no ii)Provision for WBSEDCL Meter (Make – L & T/ SIEMENS/ABB/Schneider)

BUSBAR: 500 V, 100 Amp capacity 99.9% – 99.5% electrolytic tinned 4 bar copper bus bar mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification- 1 set.

Metering Panel : a) Multifunction Meter Digital Type Load Monitor - 1 No., (Make – L & T/ SIEMENS/ABB/Schneider) b) Indicating LED Lamp with colour glasses showing (Red/Yellow/Blue) (L&T/ABB/Siemens) - 1 Set. c) 630/5 Amp ratio C.T (Kappa or equivalent) --- 3 nos. d) Supplying & Fixing 6 Amp SP MCB---- 3 nos. e) Danger board---- 1 nos.

Interconnection :- All interconnection between incoming main to Busbar are to be made with suitable size 99.9% – 99.5% electrolytic tinned copper bars or equivalent flexible pvc insulated multistranded single cor Cu cable and the same between busbar to all outgoing mains and also for metering arrangements are to be made by suitable size of Copper wire with proper socketing of the end of each wire leads. Earthing Arrangement :- A separate continuous aluminum earth busbar of appropriate size is to be painted at the inside bottom of the panel and run across the full load of the Feeder Pillar Box. All electrical equipment are to be properly earthed with suitable size G.I. strip. The complete Feeder Pillar Box is to be spray painted after required surface treatment by 7 tanks process / sand blasting with 2 coat of red oxide primer & 2 coat of finished paint over dried or powder coating. Installation :- The complete feeder pillar box board is to be installed on suitable brick padestal as directed by the E.I.C.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing materials as required. [F-6/11]

50 mm dia

65 mm dia

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S&F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI-Medium GI pipe, as per GS.[G-1-2(a)]

Excavation of soil for installation of Earth Electrode and filling & ramming, for Soft soil, as per GS.[G-1-1(a)]

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanized (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc., as per GS. (for flyover continuous earthing)[G-3-5(c)]

Proving trained manpower for guarding and traffic management at specific work zone as per direction of EIC

RIK ENTERPRISE (BID ID -6097405)

Swarnendu Sarkar (BID ID -6096982)