Laying Paver Block Inside Plant Central Maintenance to REEP, IREL, OSCOM Unit

Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 100mm thick compacted bed of course sand with propper surface dressing, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer -in- Charge. Excavation of soil to the required depth for laying of paver blocks, including disposal of excavated material, dressing, leveling, and compaction of subgrade, shall be carried out by the contractor at no extra cost. 80mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern as directed by EIC.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 (1 Cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size)

Brick work with bricks of minimum crushing strength 60 kg/cm2 in superstructure above plinth level upto floor 'V' level in cement mortar 1:6 (1 Cement : 6 coarse sand).

15 mm cement plaster on rough side of single or half brick wall with a floating coat of neat cement of mix 1:4(1 cement:4 sand) including cost and conveyance of all materials, labour, scaffolding etc. complete as directed by Engineer-in-Charge at all levels

Finishing walls with Premium Acrylic Smooth exterior paint with Silicon additives of required shade: Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior water proof primer applied @ 0.90 ltr/10 sqm)