Day to day maintenance work in T.E buildings and Staff Quarters at Sitapur for the year 2023-24.

Amount

SH : Concrete Work

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Cold twisted bars

SH : Brick work

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

SH : Wood work

Deduct for not providing Stainless steel butt hinges 100x60x2.5 mm in flush door shutter.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

SH : Steel work

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

SH : Repairs to Building

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1cement: 4 coarse sand).

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.

Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :

With F.P.S. brick tiles

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.

Orissa pattern W.C Pan of size 580x440 mm

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes within 50 metres lead as per direction of Engineer- in-Charge. (a) Internal Work - Exposed on wall

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

SH : Dismantling and Demolishing

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

SH : Sanitary Installations

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :

Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern

Providing and fixing white vitreous china water closet squatting pan (Indian type)

Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:

Flat back wash basin of size 550x400mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia

40 mm dia

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.

Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms.

SH : Water Supply

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

15 mm nominal outer dia. Pipes.

20 mm nominal outer dia. Pipes.

25 mm nominal outer dia .Pipes.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall.

15 mm dia. Nominal bore.

20 mm dia. Nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

(a) 20 mm nominal above.

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required.

15 mm nominal bore.

20 mm nominal bore.

25 mm nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

15 mm nominal bore.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690gms.

15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore

15mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT bib cock of approved quality and colour.

15 mm nominal bore, 122 mm long. Weighing not less than 99 gms.

Providing and fixing PTMT stop cock of approved quality and colour.

15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT pillar cock of approved quality and colour .

15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

15 mm nominal bore, 105 mm long. Weighing not less than 138 gms.

20 mm nominal bore, 120 mm long. Weighing not less than 198 gms.

Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 30 cm length.

15 mm nominal bore with 45 cm length.

SH : Miscellaneous

Repairing of aluminium door shutters including replacing of hinges screws etc. by taking out the existing aluminium door and refixing in same in position all complete as per direction of engineer in charge.

Providing & fixing of P.V.C. tank cover for water storage tank of approved quality & make with locking arrangement etc. all complete as per direction of engineer-in-charge.

P/F stainless steel jali (grating) with or without holes for waste pipe floor/nahani trap.

100 mm dia weight not less than 100 gms.

P/F PVC cistern handles I/c all fittings complete all as per direction of Engineer-in-charge.

P/F oxidised M.S. handles for steel windows I/c bolts, washers, nuts etc. complete.

Taking out/ reparing or both wherever reqd. for change of washers of defective bib cock, pillar cock, stop cock, angle valve, G.I. Waste pipe and other fittings of C.P. & Brass etc. all complete as per direction of Engineer-in-charge.

Taking out/ repairing of both of defective fullway valves 20 to 25 mm dia as and when reqd. all as direction of Engineer-in-charge.

P/F brass spindle in C.P. brass bib cock, angle valves, pillar cock after removing old damage spindle for proper functioning as per direction ogf Engineer-in-charge.

P/F C.P. brass L & K brand cap in C.P. brass angle valve or C.P. brass bib cock or C.P. brass Pillar cock.

P/F 32 mm dia C.P. brass waste jali in wash basins with all fittings complete.

Credit to Agency for unserviceable Brass bib cock/ pillar cock/angle valves.

Credit to Agency for unserviceable gun metal gate valves.

Credit to Agency for unserviceable brass spindles.

Credit to Agency for unserviceable M.S. /C.I./G.I. material

Hiring of bamboo ladder 25 feet long for full day i/c transportation from bamboo shop to site and returning the same after completing the work all as per direction of Engineer-in-charge.

Providing mannual assistance of any trade as per requrement for day to day maintenance work. For this items the contractor will provide all required T & P and scaffolding etc. as per requirement at site . The minimum time shall be reckoned as half day of the time required for doing the job even if the time is less than half day. The trades are as below :-

Skilled labour (Plumber, Carpenter and Mason).

Unskilled labour (Beldar and Helper)

Hiring of Welding plant for full day i/c cost of welding rods , cairrage & labour etc. complete as per direction of engineer-in-charge.

Cleaning of manhole of all sizes including removal of sludge,silt and unwanted solids and cleaning of sewer line upto next manhole and disposal of malba out of municipal limit as per direction of Engineer-in-charge.

Cleaning of Septic Tank including dewatering by manual or mechanical means and removal of sludge,silt and unwanted solids and disposal of malba out of municipal limit as per direction of Engineer-in-charge. ( Once in a Year or as and when required ).

Removal of leakage from G.I. pipe line upto 25mm dia. pipe line including necessary materials as per direction of engineer in charge.

Upto 25 mm G.I.Pipe line.

32 mm to 50mm G.I.Pipe line.

Providing materials for day to day maintenance in finishing work as and when required. ( Rates are inclusive of carriage of material at site,sale tax, water charges, C.P & O.H.).

Cement PPC including local cartage.

Sand Coarse/Fine (Hamirpur) including local cartage.

White Cement 1 kg packet

Providing materials for day to day maintenance in water supply and sanitary work as and when required. ( Rates are inclusive of carriage of material at site,sale tax, water charges, C.P & O.H.).

PVC Cistern internal fittings.

GI nipple 15mm dia 100mm long.

GI nipple 20mm dia 100mm long.

GI nipple 25mm dia 100mm long.

GI socket 15mm dia .

GI socket 20mm dia .

GI socket 25 mm dia .

GI Elbow 15 mm dia .

GI Elbow 20 mm dia .

GI Elbow 25 mm dia .

GI Tee 15x15x15 mm dia .

SHRI S.K.PANDEY