REPAIR MAINT TO BOUNDRY WALL DRAIN CULVERTS FENCING AND CULVERT IN STATION UNIT AREA UNDER GE AWC MHOW

Amount

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 but except stone including demolition of stone/boulder masonary built in cement mortar etc, all as specified and directed. Note: Stone except from stone masonary

M&L brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed. Note: Brick except from brick masonary

M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 but except stone including dismantled of stone/boulder masonary built in cement mortar etc, all as specified and directed.

M&L brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement and including taking down cement plaster any description on brick or stone wall complete, all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement complete, all as specified and directed.

M & L Raised pointing to random rubbble masonry , coursed or uncoursed in CM 1:4 complete all as specified and directed.

M & L Raised pointing to random rubbble masonry , coursed or uncoursed in CM 1:4 including raking out joints/pointing to existing old surfaces built with cement mortar, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron pickets or fencing post or any description etc, all as specified and directed.

S & F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and hollow, rectangular section, similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Description same as per item no. 10.00 but Old steel obtained from dismantling item shall be reused.

S & F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing, and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed

Restraining & resecuring existing galvanised/ms barbed wire straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed

S & F mild steel round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooking for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S & F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n. exc. 10 cm long and diameter of neck 11 mm to 15 mm, complete all as specified and as directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete.

Dismantling fencing wire mesh, any type complete.

Supply only chain link MS galavanised fencing any size or type all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. Note: Straning wire, flat iron and nuts and bolts measured and paid spearately.

S&F high density polyethylene pipes (HDPE) 50 mm dia of pressure rating 6 kgf/sqcm laid in trenches or any position, complete all as specified and directed.

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L Preparation of old steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply one coat of synthetic enamel paint complete all as specified and directed.

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not exc 10 cm in width or girth, apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded aggregate as in surface channel and drains etc. with required necessary form work and including demolition of PCC, complete all as specified and directed

M & L PCC 1:3:6 type C-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed.

Excavation in trench in soft/loose soil not exceeding 1.5M wide and not exceeding 1.5M in depth not exceeding 10 sqm on plan and getting out in any type of soil complete.

Returning filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete.

Removing surplus excavated material to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete.

S & F Reinforced concrete pipes 150 mm bore, class NP2 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed.

S & F Reinforced concrete pipes 300 mm bore, class NP2 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed.

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of priming coat(chalk whitening) complete all as specified.

M&L preparing of old plastered or unplastered surfaces of walls, cornices etc and applying one coat of cement base paint on old decorated surfaces of wall complete all as specified and directed.

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform and like, over & including 15mm thick screed bed or bedding layer in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour as per direction of GE, including demolition of stone slabs and tiles of any description or thickness etc. complete all as specified and directed

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and pigment laid over 25mm thick dry sand cushioning, filling of joints with sand including demolition of stone slabs and tiles of any description or thickness etc. colour and shape approved by GE,complete all as specified and directed. (Note : Sand for cushioning shall be measured and paid separately) .

M & L machine pressed precast concrete 80 mm thick glossy interlocking paver block M-40 Grade to IS 15658-2006, with grey cement and pigment laid over 25 mm thick dry sand cushioning, filling of joints with sand including demolition of stone slabs and tiles of any description or thickness etc. colour and shape approved by GE, complete all as specified and directed. (Note : Sand for cushioning shall be measured and paid separately) .

M & L precast cement concrete curved stone with solid blocks, exc. 10 cm in width type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 etc. , complete all as specified and directed.

M&L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M & L glossy chequred cement concrete tile 25 cm x 25 cm x 20 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 20 mm thick screed bed in cement mortar 1:4 including including demolition of stone slabs and tiles of any description or thickness etc. complete all as specified and directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed.

M & L providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc set in cement mortar 1:4 including chamfered weathering, throating etc with necessary form work and including demolition of reinforced cement concrete complete all as specified and directed. Note: Reinforcement will be measured and paid seperately

S & F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Description same as per item no. 41.00 but 6 mm to 8 mm dia complete all as above.

Dismantling of disturbed existing galvanised steel sheeting from the angle iron picket, MS square tube frame, or any other type of fixing and stacking the same a side or store safely and refixing the same to angle iron pickets or MS steel frame.

Desilting of silt/mud etc from storm water drains including disposal to a distance exc 50m and not exc 250m and depositing at a level not exc 1.5m above starting point

S & F Reinforced concrete pipes,class NP2,laid & jointed with collars 450mm bore of pipe laid in any position complete all as specifed and directed.

Dismantling of Concertina coil of any dia and length over existing barbed wire fencing of any height, shape or any place and re laying of concertina coil in old/new location in any dia , any expended length any height , any place and securing two colis each other and to barbed wire with 'U' clips staples , including all necessary securing material complete all as specified and directed.

M & L Cutting up bushes, grass, eliphant grass,small branches of tree or any other type of obstacles to create workable space along the boundary wall and up to two meter wide from the wall to fixing of CGI sheet, barbed wire and concertina coil etc., complete all as specified and directed.

J B CONSTRUCTION AND DEVLOPERS

Jamna Constructions

Goyal Construction

M/S Ashish Construction

KAILASH CHANDRA KHANDELWAL

M/s Narendra kumar Agrawal