INTERIOR & EXTERIOR FINISHING WORKS FOR G+1 BPCL OFFICE BUILDING AT SITAPUR, UTTAR PRADESH

SCHEDULE OF RATES FOR THE TENDER OF INTERIOR & EXTERIOR FINISHING WORKS FOR BPCL CGD OFFICE AT SITAPUR

Sr. No. Description Quantity Units Quoted/Unquoted

WOODEN PARTITIONS

Providing and fixing of wooden paneling on a framework of 1.5"x1.5" kail /mirandi wood members , placed at an interval of 2'0"

c/c ,finished in 19mm thick BWR ply and finished with 1mm thick laminate on both sides of approved shade as per pattern The

panelling shall be as per the Elevation drawing with the required Groove pattern,cut-outs for the electrical switch plates and LCD

TV, etc all completeas directed and to the satisfaction of the Architect / Client. Rate shall be inclusive of providing 6mm x 6mm

grooves as per Elevation and finished with paint of approved shade. The edges of ply shall be finished with 6mm thick T.W.

A1 Lipping and polished with melamine polish of app. matching shade. Rate to include all wastages, labour, hardware,necessary 30.0 SQM Quoted/Unquoted

supports & backing to ensure rigidity, levels & plumb, etc complete for 1mm laminate fixed over 100mm depth boxing made of

19mm BWR Ply fixed on both side partitions (rate to be considered inclusive of making the boxing of 19mm BWR ply,

provision of LED cove-lighting as per detail drawing, cut-outs for electrical / TV provisions, all hardware, treatment of base

surface to achieve level &plumb, etc, complete).

(Note: Only the clear Elevation area shall be considered for measurement). Base rate of Commercial board Rs.807/sqm and

Laminate : 470/sqm

A2.1 GD ( DOUBLE LEAF DOOR 1600MM WIDE) 4.0 NO. Quoted/Unquoted

A2.2 GD1 ( SINGLE LEAF DOOR 1000MM WIDE) 2.0 NO. Quoted/Unquoted

A2.3 GD2 ( SINGLE LEAF DOOR 1000MM WIDE) 12.0 NO. Quoted/Unquoted

A3.1 P (GF & FF) 4.0 SQM Quoted/Unquoted

A3.2 P1 (GF) 4.5 SQM Quoted/Unquoted

A3.3 P2 (GF) & P3 (GF) 10.0 SQM Quoted/Unquoted

A3.4 P4 (GF) & P5 (GF & FF) 14.3 SQM Quoted/Unquoted

A3.5 P6 (GF) 4.0 SQM Quoted/Unquoted

A3.6 P7 (GF) 3.8 SQM Quoted/Unquoted

A3.7 P8 (FF) & P9 (FF) 15.0 SQM Quoted/Unquoted

A3.8 P10 (FF) 4.3 SQM Quoted/Unquoted

A3.9 P11 (FF) 6.3 SQM Quoted/Unquoted

A3.10 GD ( DOUBLE LEAF DOOR 2000MM WIDE) 16.0 SQM Quoted/Unquoted

A3.11 GD1 (SINGLE LEAF DOOR 1000MM WIDE) 5.0 SQM Quoted/Unquoted

A3.12 GD2 (SINGLE LEAF DOOR 1000MM WIDE) 30.0 SQM Quoted/Unquoted

Providing and applying of Plaster of Paris Punning (1st Quality ISI approved POP) over plastered with minimum thickness of

B1 8mm-12mm to existing wall surfaces , concrete members etc., to be finished in line and plumb with smooth surface ready to 91.8 SQM Quoted/Unquoted

receive paint base. Rate to be inclusive of edge protection (GI), fibre mesh for service conduits, hacking wall surfaces for better

bonding, cleaning, scrubbing the surface, providing grooves if necessary etc., complete as per architect's/EIC approval.

TEXTURED PAINT : Providing and applying of Rustic Textured paint on Walls. Apply the material by a trowel or spatula to

obtain an even coating of 2mm. thickness. A Top coat of plastic emulsion in two or more coats to provide an even shade to be

applied on the base of rustic texture

Providing & applying of Texture paint of approved make, shade and pattern as per design/Architect/EIC. Rate to include

preparation of basesurface before applying the Texture paint as per the specifications andas directed by the Texture paint vendor.

B2 78.2 SQM Quoted/Unquoted

TEXTURE PAINT ON WALLS :Providing and applying 3 coats of Rustic Texture paintof approved make to walls, of approved

colour over a coat of water based primer including preparation of surface by thorough cleaning and wetting , Apply the material

by a trowel or spatula to obtain an even coating of 2mm. thickness and using roller to get approved textured surface. Job to

include making required surface preparation, to receive rustic Texture paint finish etc. Allcomplete as per detail drawing, as

specified and as directed by BPCL.

B3.1 GLASSNOTE STANDARD PEARL WHITE (800 MM X 600 MM) 4.0 NO. Quoted/Unquoted

B3.2 GLASSNOTE STANDARD PEARL WHITE (800 MM X 1550 MM) 1.0 NO. Quoted/Unquoted

B3.3 GLASSNOTE STANDARD PEARL WHITE (1000 MM X 1500 MM) 1.0 NO. Quoted/Unquoted

B3.4 GLASSNOTE STANDARD PEARL WHITE (900 MM X 750 MM) 1.0 NO. Quoted/Unquoted

B3.5 GLASSNOTE STANDARD PEARL WHITE (900 MM X 600 MM) 2.0 NO. Quoted/Unquoted

LAMINATE PANELLING (SKIN TYPE S1) :

Providing & Fixing of laminate panelling over existing 12mm thick ply backing over Partitions finished with approved laminate

to house the switch sockets as per the details and approval of the architect/EIC. Note : The

B4 Cost should include providing & fixing of aluminium transition L / T profile for transition of two different finish / all round with 59.0 SQM Quoted/Unquoted

approved adhesive as per the drawing complete. Care has to be taken to ensure a seamless jointing with adjacent material

finishes & levels.

Mode of measurement :Visible elevation area shall be considered.

WPC LOUVERS (SKIN TYPE S2)

Providing and fixing of WPC Louvers panel, Thickness: 15MM, on Existing column/wall/Partitions Complete as per Drawings in

B5 all respects of make LEBEN/ Alutuff / Murrato or other approved make of approved shade in approved pattern as directed by the 22.6 SQM Quoted/Unquoted

architect. Rates shall be inclusive of all hardware fittings and fixtures as required to fix the same on the wall/columns/partitions

including corner beading and fastners

Providing & fixing of Type-II Vinyl wall papers of make 3M, LG or equivalent as approved by EIC including pasting with appr.

Industrial standard Adhesive solution without any bubbles or unevenness over wall/partitions as /design. including cutting &

B6 52.9 SQM Quoted/Unquoted

cleaning (Basic rate:upto 270/= per sq ft). Installation to be carried out as per approved manufacturer's specification/instructions.

Providing & fixing of magnetic NOTICE BOARD with multiLine - Pinnbar, magnetic and sound-absorbing

• The MultiLine series is a versatile sound absorber that impresses with practical use as a wall. With visible frame in row

assembly infinitely expandable, magnetically by metal strips in the invisible frame construction or without frame in completely

B7 3.0 Nos. Quoted/Unquoted

• By using various absorber materials and surface materials that meet your individual needs, you get MultiLine in versions A2 -

non-flammable or B1 - flame retardant according to DIN

• Suggested Brand: Silent rooms or Equivalent (SKIN TYPE S3)

SIZE: (800 MM X 600 MM)

Providing & fixing of WPC MOULDING of minimum size of width 40mm & thickness 20 mm on Existing

column/wall/Partitions Complete as per Drawings in all respects of make LEBEN/ Alutuff / Murrato or other approved make of

B8 42.3 RM Quoted/Unquoted

approved shade in approved pattern as directed by the architect. Rates shall be inclusive of all hardware fittings and fixtures as

required to fix the same on the wall/columns/partitions including corner beading and fastners

Providing and fixing 12mm thk. commercial ply clad with 5mm thk. designer mirror with bevelled edges .Bevelling to be

B9 4.0 Nos. Quoted/Unquoted

provided in 25mm wide band along all sides. Min. diameter of mirror shal be 24 inch.

Painting with synthetic Enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more

B10 coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. rate to include 50 SQM Quoted/Unquoted

arranging & fixing of temporrary for plastic sheets to cover furniture, partitions, tiles etc. during painting.

Providing & Fixing of metal frame Suspended 12.5mm thick H Ceiling of make Glasroc or equivalent including providing &

fixing of Perimeter Channel made out of Material of GI conforming to IS513 having minimum yield strength of 260Mpa Finish-

C1 108.0 SQM Quoted/Unquoted

Galvanised 150GSM(IS277) of make GypSerra™ or equivalent. Permieter channel shall be fixed along the Perimeter of existing

wall/ partition with the help of PVCAnchor (6x40) at 600mm c/c for brickwall. (Grid ceiling)

Providing & Fixing expanded Metal POP False Ceiling: Providing and fixing and applying plaster of Paris (POP) false ceiling

consisting of frame work made with 50mm x 25 mm rectangular M.S tubes of 18 G thickness as main runners at max. 600 mm

c/c both ways, suspended/supported with M.S flats 25x4mm from existing R.C.C slab including providing and fixing expanded

metal mesh of max size 15mm x15mm welded/riveted to main runners and applying POP (Calcium Sulphate semi hydrate

C2 variety) to the expanded metal of thickness not less than 10mm finished smooth to line and level including necessary supports 500.0 SQM Quoted/Unquoted

scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S frame work and

suspenders complete. Rate quoted shall include providing and forming coves+band as per the design approved by EIC.

Mode of measurement: Finished plan ceiling area shall be measured for payment. Any vertical height upto 450mm to be included

with the scope which won't be calculated separately.

D1 2D WALL GRAPHICS : 103.7 SQM Quoted/Unquoted

DOUBLE DIRECTION TYPE EXIT SIGN BOARD ( WITH LUMINARE BATTERY) of size as per approved by EIC.

D2 2.0 NO. Quoted/Unquoted

D3 PERSONAL ID of size as per approved by EIC. 17.0 NO. Quoted/Unquoted

D4 ROOM ID of size as per approved by EIC. 11.0 NO. Quoted/Unquoted

D5 REST ROOM ID TYPE -A (SHE) of size as per approved by EIC. 1.0 NO. Quoted/Unquoted

D6 REST ROOM ID TYPE -B (HE) of size as per approved by EIC. 2.0 NO. Quoted/Unquoted

D7 EVACUATION MAP of size as per approved by EIC. 2.0 NO. Quoted/Unquoted

D8 PUSH / PULL SET of size as per approved by EIC. 21.0 NO. Quoted/Unquoted

D9 FLOOR STAIR ID SIGNAGE of size as per approved by EIC. 2.0 NO. Quoted/Unquoted

LOGO 1 : dia 0.9 m , material brass plated with light at back 1.0 NO. Quoted/Unquoted

LOGO 2 : dia 0.4 m , material brass plated with light at back 1.0 NO. Quoted/Unquoted

POSTER GRAPHICS: Providing & Fixing Graphics Matt laminated high quality latex/ UV printing on 300 gsm HP photo

D11 paper sandwiched between 2 nos. of 5mm thk clear acrylic panels & mounted on stainless steel studs of approved color & design 24.9 SQM Quoted/Unquoted

as instructed by EIC.

D12 3D BACKLIT ACRYLIC LETTERS of max. size of 4.0 sq.m. 1.0 NO. Quoted/Unquoted

Providing & arranging in position table of top made out of 25 mm thick commercial plyboard of Anchor 2000 or approved

equivalent make finished with 1 mm thick laminate of the approved make and shade & support out of necessary wood/ply frame

work with necessary beading, mouldings, footrest etc. Top to be finished with group matching approved laminate. Provide two

E1.1 nos. of 4 module Ligrand make pop up box on top of the table. The side to be with layers of 19 mm thick commercial plyboard 2.5 SQM Quoted/Unquoted

finished with 1mm thick laminate of approved shade, vertical supports in 19mm thick commercial plywood finished with

laminate of approved shade including necessary additional supports, best quality Teak Wood beadings, mouldings, etc. as per

drawing and design. Edge of the top platform shall be finished with min. 2 mm thick PVA edge banding material of same shade

and design as of top laminate, complete. Complete work as per tender drawings/instructions of EIC.

Mode of Measurement :- Length X Width i.e. measurement in plan.

E1.2.1 STORAGE -01 2.7 SQM Quoted/Unquoted

E1.2.2 STORAGE -02 3.0 SQM Quoted/Unquoted

E1.2.3 STORAGE -03 13.3 SQM Quoted/Unquoted

E1.2.4 STORAGE -04 2.8 SQM Quoted/Unquoted

E1.2.5 STORAGE -05 2.8 SQM Quoted/Unquoted

E1.2.6 STORAGE -06 2.8 SQM Quoted/Unquoted

E1.2.7 STORAGE -07 1.4 SQM Quoted/Unquoted

E1.2.8 STORAGE -08 1.7 SQM Quoted/Unquoted

E1.3.1 PLANTER-01(RECEPTION) 1.4 M3 Quoted/Unquoted

E1.3.2 PLANTER-02(DINING) 0.7 M3 Quoted/Unquoted

E1.3.3 PLANTER-03(WORKSTATION FF) 1.4 M3 Quoted/Unquoted

Providing & Fixing of 19mm thk commercial ply in false ceiling above the glass partition

E1.4 25.6 RM Quoted/Unquoted

Mode of Measurement :- Length

F1 TYPE 1 : FROSTED GLASS FILM 65.9 SQM Quoted/Unquoted

F2 TYPE 2 :FROSTED GLASS FILM WITH LOGO 23.0 SQM Quoted/Unquoted

G1 ROLLER ZEBRA BLINDS (BL1) 69.4 SQM Quoted/Unquoted

G2 SUN CONTROL BLACKOUT BLINDS (BL2) 14 SQM Quoted/Unquoted

H1 Providing & fixing of Decorative METAL T PROFILE of approved color complete in all aspects as per instruction of EIC. 180.00 RMT Quoted/Unquoted

Providing & fixing of METAL SCREEN of Powder coated MS frame with 32x32mm 16 guage hollow pipe all as per the

detailed drawings and instructions of Engineer In charge including bolted/anchoring complete. The rate shall include supply &

fixing of fixed frosted glass of 5 mm thickness of approved make including suitable arrangement for fixing with metal frame.

H2 1.00 LS Quoted/Unquoted

Rates to include the cost of all installation charges and materials like all SS patch fittings, and RTV Silicon sealants and

provision for hanging artificial decorative plant pots etc. complete all as per drawing and instructions of EIC.

Size- 4.6 m x 3.1 m (Length x Height) with variation of +/-5% as per actual site conditions

H3 Providing of Ceramic planters with Indoor plants as approved by EIC. 28.00 Nos. Quoted/Unquoted

H4 Providing of Artificial plants 20.00 Nos. Quoted/Unquoted

H5 Supplying and placing in position Dustbin in SS finish 10" dia 450mm ht 25.00 Nos. Quoted/Unquoted

Supply & Installation of wall mounted type Kitchen Chimney of Hindware or Faber make. Finish shall be of Stainless Steel &

H6 1.00 Nos. Quoted/Unquoted

min. suction power shall be 1095m3/hr with 3 layer baffle filters. Width of chimney shall be min. 60 Cm

A 10W AURASTYLE EDGE PANEL NW having 900 Lumen with min. 2 years, material Metal 36 Nos. Quoted/Unquoted

B 12W DURASLIM PANEL RD NW having 1260 Lumen with min. 2 years, material Metal 62 Nos. Quoted/Unquoted

C 15W AURASTYLE EDGE PANEL NW having 1420 Lumen with min. 2 years, material Metal 6 Nos. Quoted/Unquoted

D 7W COB PRO NW having 630 Lumen with min. 2 years, material Metal 24 Nos. Quoted/Unquoted

E 12W COB PRO NW having 1080 Lumen with min. 2 years, material Metal 38 Nos. Quoted/Unquoted

F RC380B LED36S-4000 G6 L60W60 PSU OD L1 W 30WATT having 3600 Lumen with min. 2 years, material Metal 9 Nos. Quoted/Unquoted

G RC380B LED25S-4000 G6 L60W60 PSU OD 21WATT having 2500 Lumen with min. 2 years, material Metal 10 Nos. Quoted/Unquoted

H 6W Linea Sharp LED COB (NW) having 360 Lumen with min. 2 years, material Metal 30 Nos. Quoted/Unquoted

I 10W TRACK HEAD NW having 700 Lumer with min. 2 years, material polycarbonate 4 Nos. Quoted/Unquoted

J TRACK PATTI 1 MTR, material Metal 2 Nos. Quoted/Unquoted

L LED ROPE LIGHT 120/MTR (50MTR) having 700 Lumen/meter with min. 2 years, material polycarbonate 5 Nos. Quoted/Unquoted

M PROGLOW NXT 264LED /MTR PROFILE STRIP + DRIVER 5A NW having 1000 Lumen per meter with min. 2 years 8 Nos. Quoted/Unquoted

N ROPE LIGHT ADOPTER 10 Nos. Quoted/Unquoted

A Hanging light of 12x 42 W Wattage 1 Nos. Quoted/Unquoted

B Pendent Light of 1x10 W Wattage 2 Nos. Quoted/Unquoted

C Wall Light of 1x 9 W wattage 2 Nos. Quoted/Unquoted

D Hanging Ballon Light of 4 x 20 W 14 Nos. Quoted/Unquoted

Supply & installation of High-Pressure Laminate & MS Framework

Supply & installation of decorative high pressure laminated (HPL) sheet of plain / wood grain in gloss / matt/ suede finish with

high density protective surface layer of approved color on external face of building including supply & installation of MS frame

structure made of 3 mm thick vertical MS hollow pipe of size 2" x 2" (50mm x 50mm) & 3mm thick horizontal MS hollow pipe

of size 1" x 2" (25mm x 50mm). Framing members to be placed 2'-0" x 2'-0" c/c vertically as well as horizontally. The rate shall

be inclusive of necessary scaffolding, providing & applying red oxide primer & enamel paint over MS members, supply & fixing

of MS L bracket of size 100 mmx50mmx10 mm and 75 mmx50mmx10mm, supply & fixing of 12 mm dia & 60 mm length

J.1 450.00 m2 Quoted/Unquoted

industry grade fasteners complete as per the design and instructions of EIC/Architect. Cost shall also include fixing with all the

required hardware and welding for the framework making good up to the satisfaction of Engineer In charge & including making

the provision for 2mm deep groove making @ 6" C/C to support HPL laminte fixing it with Pop Revit. Laminate shall be cut and

finished and made smooth as per columns and beams sizes

The HPL sheet size shall be 8'-0" x 4'-0" & it shall be min. 6mm thk. of make Merino, Royal crown, Viva or equivalent.

Make of MS hollow pipe shall be Apolo or equivalent.

Mode of measurement shall be the Area measured in elevation i.e. Length x Height.

Supply, Fabrication & Installation of Structural Glazing

Supply, Fabricating and fixing structural glazing for curtain wall made out of extruded Aluminium sections 22740, 22737,

or any section as per site requirement which includes Curtainwall Main grid Mullion & Transoms of make "Jindal Aluminum

Limited" or any other equivalent brand designed to withstand the wind pressure as per IS 875 (Part-III) with Super Durable

powder coating of 60-80 microns confirming to AAMA 2604 of required color and shade as approved by the Engineer-in-Charge

on external face of building of approved panel size including necessary scaffolding, hold on aluminum cleats, required aluminum

cleats (Min. Size of 50x50x3mm), Powder coated MS brackets of 75x75x6 mm, Anchor fasteners (Min. of 12 mm dia & 60 mm

length), SS 304 Screws confirming BS 6105, sleeves and splice plates, 2mm thk. Aluminium trims and flashings to seal the gaps

between curtain wall and the building structure and any other fittings required for the completion of work and making perfectly

on vertical plane, making good up to the satisfaction of Engineer In charge & as per the architectural drawings, specification and

in conjunction with BOQ and approved shop drawings and including keeping provision for fixing of 24 mm thick double glazed

J.2 900.00 Kg Quoted/Unquoted

Gaps up to 10 mm between the peripheral aluminum member and masonry / R.C.C. / Stone shall be sealed by inserting Backer

Rod and weather silicon. Wherever the gaps are expected to be more than 10 mm, shall be sealed by providing and fixing of 2mm

thick aluminum trims & flashings bent to required profile as per approved design duly Pure Polyester powder coated to

Micron thickness in approved color / natural anodized to 20 - 25 microns.

The extruded aluminum sections shall be of 6063 T6 alloy or BSH9 Conforming to IS- 63400 and are designed to withstand wind

pressure as per CTM at all levels, elevations and heights. The extruded aluminum sections of Alloy 6063 T5 or T6 as per BS1474

and tolerances, flatness, twist , bend and angularity confirming to DIN standard from approved extruder.

Mode of measurement will be on the weight of Aluminium section only. Nothing extra will be payable. 24 mm thick glass shall

be paid in separate SOW item.

Providing , installation & fixing of Double glazed glass system

Providing , installation & fixing of Double glazed glass system of toughened glasses, make Saint-Gobain or equivalent with

necessary corrosion resistance accessories/ fittings, specially extruded EPDM gaskets confirming BS 4255, Die casted corner clit

on structural glazing in approved panel sizes including 6x6mm spacer tape of make Norton or Dow, backer rods and Silicon

sealant (Dow Corning or equivalent brand) with warranty of minimum 15 yrs making the glass air & water tight & necessary

scaffolding designed to withstand the wind pressure as per IS 875 (Part-III).

DGU Panels should be factory fabricated and should be as per approved manufacturers specifications. DGU Glass system shall be

6 mm reflective toughened glass of approved color + 10 to 12 mm air gap between filled with argon or any other inert gas and

hermetically sealed + 6 mm toughened glass of approved color which will take care of Solar heat gain coefficient (SGHC)= 0.25,

U value= 0.58 BTU/hr.sqft. Deg F or 3.3 W/sqm K, Visible Light Transmittance (VLT): 30%–40%, Infrared Reflectance (IR):

10%, External Reflectance (ER): 15%. The total thickness of glass including the air gaps are 24mm.

J.3 The contractor shall submit the manufacturer’s data sheet before placing of the order to confirm technical data to the Engineer-in- 198.00 M2 Quoted/Unquoted

1. Performance Laboratory Test for Air Leakage Test (- 50pa to –300pa) & (+50pa to +300pa) as per ASTM E- 283-04 testing

method for a range of testing limit 1 to 200 mVhr

2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME-331- 09 testing method for a range up to 2000 ml.”

3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range up to 2000 ml”

4. Structural Performance Deflection and deformation by static air pressure test (1.5 times design wind pressure without any

failure) as per ASTME330- 10 testing method for a range up to 50 mm”

5. Seismic Movement Test (up to 30 mm) as per AAMA 501.4-09

6. Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) up to 2000ml”

Mode of Measurement will be for glass in Elevation i.e. length x height. Measurement will be made for one side of glass only

though double glazed glass system is to be supplied & installed.

Supply and Installation of Frameless glass railing system

Supply & installation of frameless 12mm clear Toughened Glass railing including providing and fixing of an Aluminium Bottom

“PICO” Profile 75mm in height and 62mm in width, in Silver anodized finish. This PICO Profile shall be made from 6063 T6

grade material. This system shall be suitable to accommodate 12mm Clear Toughened Glass. PICO bottom profile will be

securely anchored to the floor using klimas GI hex head anchor M10*120mm, with 4 fasteners per meter, and the glass will be

affixed to the bottom profile with POM shims, 4nos per meter.

J.4 10.00 RM Quoted/Unquoted

An EPDM gasket will be used to seal and secure the Aluminium U Capping size 25x25mm, in Silver anodized finish. This

handrail, made from 6063 T6 grade material, will be attached to the top of the glass edge sealed with gaskets.

The measurement method for this railing is based on RMT, and it should be taken along the handrail, spanning from wall to wall.

Total railing height from Bottom of Profile to top of Handrail is 600mm.

Make of glass: Saint gobain

WALL TILES - Supply and installation of 1st quality Digital Ceramic Tiles of maximum size 120x60cm over 12mm thick bed

of cement bed of cement mortar 1:3 (1 cement :3 Coarse Sand) including pasting with cement slurry @ 3.3 kg/sqm, including

J.5 120.00 m2 Quoted/Unquoted

pointing with cement grout of shade matching with the tile. The rate shall be inclusive of necessary scaffolding work and making

perfectly on vertical plane, making good up to the satisfaction of Engineer In charge

Providing & installation of Powder coated Aluminium rafters of size 4" x 3" x 14'-0" ht. & 16 gauge of "Jindal Aluminum

Limited" or any other equivalent brand with 8 micron thick powder coating (approved color) on external face of building

J.6 including necessary scaffolding, hold on aluminum cleats, required aluminum brackets (Min. Size of 50x50x3mm), Powder 19.00 No. Quoted/Unquoted

coated MS brackets, anchor fasteners (Min. of 12 mm dia & 60 mm length), SS Screws and any other fittings required for the

completion of work and making perfectly on vertical plane, making good up to the satisfaction of Engineer In charge.

Providing & Fixing of Powder coated letters made with 5 mm thick acrylic & LED light to make "BHARAT PETROLEUM"

J.7 including supporting with MS angles. Height of the letters will be 19" and size shall be as per detailed drawing . LED make : 1.00 LS Quoted/Unquoted

philips or Equivalent

Providing & Fixing of Powder coated BPCL Logo made with 5 mm thick acrylic & LED light including supporting with MS

J.8 1.00 LS Quoted/Unquoted

angles. Size of logo shall be 1.5 m x 1.5 m. LED make : philips or Equivalent

WaterProof profile light for Exterior LED

J.9.1 150.00 RM Quoted/Unquoted

Make : philips or Equivalent

Down Elevation light 6W-WW

J.9.2 6.00 Nos. Quoted/Unquoted

Make: Wipro or equivalent

Projection down light of 12W COB PRO NW

J.9.3 7.00 Nos. Quoted/Unquoted

Make : philips or Equivalent

K.1 Supply & fixing information outlet box suitable for RJ 45 terminals including PVC mounting box & top cover. 62 Nos. Quoted/Unquoted

Supply & laying E-CAT 6 UTP, 04 pair cable in PVC conduit including termination on either end.

K.2 1215 Nos. Quoted/Unquoted

Supply & fixing 09 U Server rack with power distribution box, cable manager, cantilever self, fan & mounting kit

K.3 1 Nos. Quoted/Unquoted

etc all complete.

K.4 Supply & fixing 24 port DATA SWITCH 3 Nos. Quoted/Unquoted

K.5 Supply & fixing Router for Internet 1 Nos. Quoted/Unquoted

K.6 Supply & fixing 24 port PATCH PANEL 3 Nos. Quoted/Unquoted

Supply & fixing 2 Mtr long E-CAT 6 PATCH

K.7 62 Nos. Quoted/Unquoted

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone

L.1 button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required. 1 No. Quoted/Unquoted

L.2 Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required 27 No. Quoted/Unquoted

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply

L.3 1 No. Quoted/Unquoted

complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface/ recessed steel

L.4 conduit of following pairs, cores and size including connections and interconnections etc. as required: 550 Meter Quoted/Unquoted

speaker cable Two pair, 2-core, 1.5 sqmm

Supply, Installation, testing and commissioning of Telephone Exchange (PBX) suitable for voice calls. The system is expandable

M.1 1 Nos. Quoted/Unquoted

up to 100 lines connected battery back up during power failure. accessories all complete as required.

M.2 Intercome Phone with 16 digit LCD display & adjustable contrast, 10 one touch memory button and speaker handfree. 42 Nos. Quoted/Unquoted

M.3.1 4 pair 445 Meter Quoted/Unquoted

M.3.2 8 pair 90 Meter Quoted/Unquoted

M.3.3 10 pair 230 Meter Quoted/Unquoted

M.4.1 Telephone socket outlet 42 Nos. Quoted/Unquoted

M.5.1 1 or 2 Module (75mmX75mm) 42 Nos. Quoted/Unquoted

M.6.1 20 Pair (KRONE make) Telephone tag block in suitable M.S. Box. 2 Nos. Quoted/Unquoted

M.6.2 10 Pair (KRONE make) Telephone tag block in suitable M.S. Box. 1 Nos. Quoted/Unquoted

Supply & fixing of Telephone line wire Patch cable compatible for Landline & Telephone (5m) with RJ 11 connector at both

M.7 42 Nos. Quoted/Unquoted

ends for connection.

Supply, installation, testing, and commissioning of the elevator system and related civil, electrical and mechanical activities.

Cabin shall be made of Hairline finish stainless steel having cabin size of 1000mm X 1100 mm x 2100 mm (BxLxH) with one

side access and power operated sliding door. Lift shall be machine-room-less (MRL) with a capacity of six passengers and a

minimum weight carrying capacity of 408 kg for G+2 office building, comprising three stops. rated Speed of Lift shall be min.

0.63 m/s. The elevator must be of make of Schindler, Otis, Johnson Lifts, or any other approved make. The approximate floor-to-

floor height is 3.5 meters, but the vendor must verify exact dimensions using the provided architectural drawings before

proceeding. The elevator shaft (well) is approximately 1.8m x 1.8m as per site conditions. The elevator should feature a center-

opening door with a minimum 2-hour fire rating and an aluminium sill. Pit depth should conform to actual site conditions. Final

N.1 dimensions and installation details must receive prior approval from the Engineer-in-Charge before any ordering is undertaken. 1.0 No. Quoted/Unquoted

Cain operating panel shall have digital display with Flat Marking Milk White Character

Glow Red Braille. Landind indicator shall be wall mounted with 1s15 - Ea1102(Bas11c) Flat Marking Milk White Character

Glow Red Braille (Square) and digital display. Lift shall have safety feastures including overspeed governor, inbuilt counter

weight screen, overload indicator, automatic rescue button & Battery Operated Emg Alarm Light.

Quoted rate shall include providing of all standard features such as an intercom facility, fan, handrail, emergency light and alarm,

LED floor display, and soft background music & CCTV interface provision. A one-year free maintenance period is required post-

installation. Lift shall be provided with emergencu backup in case of power failure and shall have provision to move to nearest

Kitchen Cabinet- Providing, fabricating & fixing in desired position Storages made out of 19 mm thick commercial plywood

carcass/shutters and back with 6mm thick commercial plywood of Anchor 2000 or approved equivalent make. The storage

cabinets shall be provided with required nos. of shelves in 18mm thick commercial plywood and all internal surfaces to be

finished with French polish. The rate to include hardware by hettich(all hinges & channels) or approved equivalent make, brass

tower bolts, SS handles/knobs of Kich or approved equivalent make, ball catcher etc. complete. The shutters shall be fixed with S

type L hinges of approved make so as to get an equal 8 mm groove between all the shutters at the opening and hinged end of

every shutter. PVC 4" height skirting of SS finish. All sliding within the powder coated aluminum channels having bearing for

smooth movement, PVC guide etc. All the external surfaces shall be finished with 1 mm thk. laminate of the approved make and

shade. The internal surfaces to be finished in 0.8 mm thk. balancing laminate. The rate shall be inclusive of provision of SS D

type handles 4 or 6 as approved, multipurpose locks with 3 keys and all the necessary hardware, fixtures, fittings like brass

O.1 hinges, magnetic ball-catch, chains, tower bolts, locking arrangement etc complete in all respects as directed by BPCL. The rear 13.5 M2 Quoted/Unquoted

side of the cupboard to be treated with the anti-termite oil as approved by the EIC/ Architect. Complete work as per tender

drawings/instructions of EIC.

Make of Hardware : Hettich or equivalent

Stone top : Granite of base rate : 110 - 120 rs/sq.ft

Make of laminate : GreenLam,Merino, Advance

Make of ply : Century, Duro, GreenLam

Mode of Measurement :- Length X Height i.e. measurement in elevation

Stainless Steel Bain Marie Counter size : 1200*900*850

HOT BAIN MARIE WITH 1 NO. 1/1 GN PANS & 4 NO.1/2 GN PAN WITH SNEEZ GAURD AND 3 SIDE COVERED , The

top shall be made of 16 SWG SS 304 . Interior frame structure to be made of SS 16 swg . 25mm or 30mm Square Pipe and

additional frame support of SS 16 SWG. . All Legs to be made of SS 16 SWG . 40mm 304 quality Square Pipe with adjustable

nylon bolts.All equipment top to be made from 16 swg with all sides down bedded twice within ss angle/SS pipe support..All

bottom and upper shelves to be made from 18swg with all sides down bedded twice within ss angle/ss pipe support.Side covers to

O.2 1.0 LS Quoted/Unquoted

be made from 18 swg.NO MILD STEEL TO BE USED ANY WHERE IN THE CONSTRUCTION.All shelves to have stiffner

support.All equipment to be made on 1.5” dia. s.s. pipe with adjustable nylon bolt. RAILING WITH WASTAGE COLLECTION

TRAY , GN PAN ZANUFF MAKE , HEATER : 3 KW , WITH PROPER DRAIN SYSTEM

Stainless Steel CUTLERY PICK UP TABLE size : 1000*900*850

CUTLERY PICK UP TABLE WITH TRAY SLIDE WITH 3 SIDE COVERED WITH SNEEZ GAURD : The top shall be made

of 16 SWG SS 304 . Interior frame structure to be made of SS 16 swg . 25mm or 30mm Square Pipe and additional frame

support of SS 16 SWG. . All Legs to be made of SS 16 SWG . 40mm 304 quality Square Pipe with adjustable nylon bolts.All

equipment top to be made from 16 swg with all sides down bedded twice within ss angle/SS pipe support..All bottom and upper

O.3 1.0 LS Quoted/Unquoted

shelves to be made from 18swg with all sides down bedded twice within ss angle/ss pipe support.Side covers to be made from

swg.NO MILD STEEL TO BE USED ANY WHERE IN THE CONSTRUCTION.All shelves to have stiffner support.All

equipment to be made on 1.5” dia. s.s. pipe with adjustable nylon bolt. RAILING WITH WASTAGE COLLECTION TRAY

Stainless Steel CUTLERY PICK UP TABLE size : 616*900*850

CUTLERY PICK UP TABLE WITH TRAY SLIDE WITH 3 SIDE COVERED WITH SNEEZ GAURD : The top shall be made

of 16 SWG SS 304 . Interior frame structure to be made of SS 16 swg . 25mm or 30mm Square Pipe and additional frame

support of SS 16 SWG. . All Legs to be made of SS 16 SWG . 40mm 304 quality Square Pipe with adjustable nylon bolts.All

equipment top to be made from 16 swg with all sides down bedded twice within ss angle/SS pipe support..All bottom and upper

O.4 1.0 LS Quoted/Unquoted

shelves to be made from 18swg with all sides down bedded twice within ss angle/ss pipe support.Side covers to be made from

swg.NO MILD STEEL TO BE USED ANY WHERE IN THE CONSTRUCTION.All shelves to have stiffner support.All

equipment to be made on 1.5” dia. s.s. pipe with adjustable nylon bolt. RAILING WITH WASTAGE COLLECTION TRAY