job no 2419 re call

Amount

HSR 8.6(D)/ Dismantling concrete (d) cement concrete plain 1:2:4 mix

HSR 8.32(c)/ Scrapping (c) Cement Plaster

HSR 8.33(b)/ Removal of old broken glass panes (any thickness or size, quality or description) from metal frames including punching or drilling out old glazing pins/clips.

HSR 10.38/ Cement concrete 1:4:8 with stone aggregate 20 mm nominal size in foundation and plinth

HSR 10.41/ Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth

HSR 10.42/ Cement concrete 1:1.1/2:3 with stone aggregate 20 mm nominal size in foundation and plinth

HSR 10.82/ Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects.

HSR 11.23/ First class brick work laid in cement, stone dust (from crusher) mortar 1:5 in foundation and plinth

HSR 15.4 +15.75/ 12 mm thick cement plaster 1:3 + Cement rendering on plaster 1mm thick

HSR 15.6/ 12mm thick cement plaster 1:5

HSR 15.9/ 15 mm thick cement plaster 1:3 on the rough side of single or half brick wall

HSR 16.52/ Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finish the surface to the required finish complete.

HSR 16.60/ Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work.

HSR 16.79/ Providing two coats of exterior acrylic emulsion paint. (b) 1st Quality.

HSR 16.81/ Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K./ Birla make)

HSR 17.90(b)/ Factory-manufactured paneled door or glazed window, shutters of commercial hard wood, such as hillock, champ, chikrassy and chaplash, etc., (non-coniferous timber other than teak, conforming to I.S. specification No. 1003, kiln-seasoned), with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete fixed in position ( excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) (b) 35 mm thick

HSR 18.12/ Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, grating frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position.

HSR 18.22/ Cold twisted deformed (ribbed/TOR steel) bars for RCC works, where not included in the complete rate of RCC including bending binding and placing in position complete.

HSR 28.10(c)/ Providing and fixing of cast iron double flanged sluice valves PN 1.6 marked with IS: 14846 including nuts & bolts marked with IS: 1363, Rubber Sheet marked with IS: 638 etc. carriage loading, unloading, stacking, handling, Re-handling etc. complete in all respect to the satisfaction of Engineer-in-Charge. (Makes AARKO, VENUS, LEADER, SI, PANJA, UPADHAY. (c) 150mm i/d

HSR 28.10(d)/ 200mm i/d

HSR 28.10(f)/ 300mm i/d

HSR 28.10(A)(c)/ Providing & Fixing Cast iron double flanged swing check type reflux (Non-return) valves PN-1.6 market with IS: 5312 including nuts and bolts marked with IS: 1363, Rubber Sheet marked with IS: 638 etc. carriage loading, unloading, stacking handling, re-handling etc. complete in all respect to the satisfaction of Engineer-in-Charge. (Makes AARKO, VENUS, LEADER, BIR, PANJA, UPADHAY) (c) 150mm i/d

HSR 28.10(A)(d)/ 200mm i/d

HSR 28.61(II)/ Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile iron (DI) ISI marked K-7 grade S&S pipes as per IS: 8329-2000 (amended up to date), with internal cement mortar lining for portable water with rubber ring (EPDM/SBR) joints as per IS: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of Engineer. Note: E/W to be measured and paid separately. (ii) 150mm i/d

HSR 28.65(I)/ Providing, lowering, laying aligning, fixing in position and jointing at all level/ depths DI standard specials plain/ flanged/ socketed confirming to IS-9523-2000 with rubber ring (EPDM/ SBR) joints such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, Labour, testing and commissioning along with pipe line as per technical specifications and as per direction of Engineer. (i) Up to 300mm i/d

NS Item/ Supplying, Laying, Jointing, Cutting, Testing & Commissioning of MS specials such as collars, coupling, band etc. including carriage, loading and unloading compete in all respect as per satisfaction of the Engineer-in-charge.

NS Item/ Supply, erection, commissioning and testing of 1 HP Horizontal centrifugal motor for priming of 400 m³/ Hr pump including all fittings and fixtures complete in all respect. Make of Motor and Pump: Kirloskar, Kishore, KSB

NS Item/ Supply, erection, commissioning and testing of 75kW/ 100 HP (minimum) horizontal centrifugal motor with pump having discharge of 400m³/ Hour (minimum) with 45 meter head, casing of pump made up of CI IS 210 Gr FG 260, impeller – SS CF8M, Shaft – SS 410, Shaft sleeve – SS 410-H and shaft sealing should be Gland packed including coupling, coupling guard and Fully automatic Star Delta Starter panel with 1 No. incomer & 2 No. out goers suitable for running of 2 No. 100 HP horizontal centrifugal motor with Push button start/stop and digital metering system with all type of safety standards including Labour Charges for loading and unloading and cartage etc. for all above material by hydra or any mechanical means complete in all respect to the entire satisfaction of Engineer-in-Charge. Make of Motor and Pump: Kirloskar, Kishore, KSB Make of Starter Panel: Schneider, ABB

Rishipal Contractor