CPPP

Active

Works

Civil Works

Waterproofing treatment work at the entrance of core 1 and core 4 of Academic complex in IITG Campus

Indian Institute of Technology Guwahati

IIT GUWAHATI | Kamrup, Assam

Amount: ₹66.6 LCloses: 5 Oct 2026

Timeline

Published18 Sept 2026
Submission Opens24 Sept 2026
Closes5 Oct 2026
Bid Opening6 Oct 2026

Tender Value

₹66.6 L

EMD Value

₹1.3 L

Closing Date

5 Oct 2026, 11:30 am

Tender Inviting Organisation

Name

HOS MAINTENANCE

Address

IPM SECTION IIT GUWAHATI

Work Description

Waterproofing treatment work at the entrance of core 1 and core 4 of Academic complex in IITG Campus

Tender Information

Tender ID

2026_IITG_926753_1

Reference Number

IITG/IPM/NIT/R/2026-27/40

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

180 days

Location

IIT GUWAHATI

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredTechnical Bid (.pdf)

Finance

RequiredFinancial Bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹5,000

Tender Fee Payable To

IIT Guwahati

EMD Fee Amount

₹1.3 L

Important Dates

Last Activity

18 Sept 2026

Published

18 Sept 2026

Bid Opening

6 Oct 2026

Download Starts

18 Sept 2026

Download Ends

5 Oct 2026

Submission Starts

24 Sept 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (23 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Roof Water Proofing
1.1	Dismantling tile/stone work in floors and roofs laid in cement mortar including stacking material within the campus as directed by Engineer in Charge. For thickness of tiles above 25 mm and up to 100 mm	1,383	Sqm	-	-
1.2	1. Concrete surface must cleaned with wire brush/grinder to remove loose mortar and must be smooth, uniform, clean and dust free to receive the treatment. Concrete profile should be in the range of CSP 3-4. Preliminary Treatment 2. Any crack, construction joints shall be treated with Polymer modified repair mortar/ SC General purpose grout by proper grooving arrangement [10 x 5 mm] as per manufactures recommendation. 3.Testing by ponding water for 24-72 hours to identify surface defects min. 25 mm-100 mm, (a) First Ponding Test to be on Structural Slab, (b) Second Ponding Test after waterproofing Treatment, (c) Third Ponding Test after Screed laying	1,383	sqm	-	-
1.3	Supply and installation of roller / brush applied waterproofing built up of Smartcare PU MAGNUM US post application of solvent-based epoxy primer coat Apcoflor Epoxy Primer [250 g/sqm] or equivalent. Waterproof coat of roller applied Smartcare PU MAGNUM US is based on pure elastomeric , polyurethane resin system resist upto 5 bar water head and Medium duty traffic movements etc. with bonding strength > 1.5 Mpa (ASTM D 4541), Elongation >600% (ASTM D412), Tensile Strength – 3-4 MPa(ASTM D412), density 1.25-1.25 kg, Hardness >50 shore A, 35 shore D , Crack bridging capacity > 3 mm [ASTM C 1305] . Overcoating time between each layer should be min. 8-10 Hours and not more than 24 Hours.	1,383	sqm	-	-
1.4	Supplying and laying 150 GSM geotextile over the Horizontal waterproofing layer to receive the protection and slope making screed.	1,383	sqm	-	-
1.5	Making of angle fillets all around the periphery of the wall with polymer modified mortar using SmartCare Repair Mortar.	120	rm	-	-
2Grading roof for water proofing treatment with
2.1	(a) Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)	99.5	Cum	10	₹995
2.2	18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick Design cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.	388	sqm	10	₹3,880
3Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.60 MB

Work Item Documents

NIT.pdf

Tender Documents • 1.00 MB

BOQ_973888.xls

BOQ • 0.43 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Roof Water Proofing
1.1	Dismantling tile/stone work in floors and roofs laid in cement mortar including stacking material within the campus as directed by Engineer in Charge. For thickness of tiles above 25 mm and up to 100 mm	1,383	Sqm	-	-
1.2	1. Concrete surface must cleaned with wire brush/grinder to remove loose mortar and must be smooth, uniform, clean and dust free to receive the treatment. Concrete profile should be in the range of CSP 3-4. Preliminary Treatment 2. Any crack, construction joints shall be treated with Polymer modified repair mortar/ SC General purpose grout by proper grooving arrangement [10 x 5 mm] as per manufactures recommendation. 3.Testing by ponding water for 24-72 hours to identify surface defects min. 25 mm-100 mm, (a) First Ponding Test to be on Structural Slab, (b) Second Ponding Test after waterproofing Treatment, (c) Third Ponding Test after Screed laying	1,383	sqm	-	-
1.3	Supply and installation of roller / brush applied waterproofing built up of Smartcare PU MAGNUM US post application of solvent-based epoxy primer coat Apcoflor Epoxy Primer [250 g/sqm] or equivalent. Waterproof coat of roller applied Smartcare PU MAGNUM US is based on pure elastomeric , polyurethane resin system resist upto 5 bar water head and Medium duty traffic movements etc. with bonding strength > 1.5 Mpa (ASTM D 4541), Elongation >600% (ASTM D412), Tensile Strength – 3-4 MPa(ASTM D412), density 1.25-1.25 kg, Hardness >50 shore A, 35 shore D , Crack bridging capacity > 3 mm [ASTM C 1305] . Overcoating time between each layer should be min. 8-10 Hours and not more than 24 Hours.	1,383	sqm	-	-
1.4	Supplying and laying 150 GSM geotextile over the Horizontal waterproofing layer to receive the protection and slope making screed.	1,383	sqm	-	-
1.5	Making of angle fillets all around the periphery of the wall with polymer modified mortar using SmartCare Repair Mortar.	120	rm	-	-
2Grading roof for water proofing treatment with
2.1	(a) Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)	99.5	Cum	10	₹995
2.2	18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick Design cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.	388	sqm	10	₹3,880
3Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Roof Water Proofing

1.1

Dismantling tile/stone work in floors and roofs laid in cement mortar including stacking material within the campus as directed by Engineer in Charge. For thickness of tiles above 25 mm and up to 100 mm

1,383

Sqm

1.2

1. Concrete surface must cleaned with wire brush/grinder to remove loose mortar and must be smooth, uniform, clean and dust free to receive the treatment. Concrete profile should be in the range of CSP 3-4. Preliminary Treatment 2. Any crack, construction joints shall be treated with Polymer modified repair mortar/ SC General purpose grout by proper grooving arrangement [10 x 5 mm] as per manufactures recommendation. 3.Testing by ponding water for 24-72 hours to identify surface defects min. 25 mm-100 mm, (a) First Ponding Test to be on Structural Slab, (b) Second Ponding Test after waterproofing Treatment, (c) Third Ponding Test after Screed laying

1,383

sqm

1.3

Supply and installation of roller / brush applied waterproofing built up of Smartcare PU MAGNUM US post application of solvent-based epoxy primer coat Apcoflor Epoxy Primer [250 g/sqm] or equivalent. Waterproof coat of roller applied Smartcare PU MAGNUM US is based on pure elastomeric , polyurethane resin system resist upto 5 bar water head and Medium duty traffic movements etc. with bonding strength > 1.5 Mpa (ASTM D 4541), Elongation >600% (ASTM D412), Tensile Strength – 3-4 MPa(ASTM D412), density 1.25-1.25 kg, Hardness >50 shore A, 35 shore D , Crack bridging capacity > 3 mm [ASTM C 1305] . Overcoating time between each layer should be min. 8-10 Hours and not more than 24 Hours.

1,383

sqm

1.4

Supplying and laying 150 GSM geotextile over the Horizontal waterproofing layer to receive the protection and slope making screed.

1,383

sqm

1.5

Making of angle fillets all around the periphery of the wall with polymer modified mortar using SmartCare Repair Mortar.

120

2Grading roof for water proofing treatment with

2.1

(a) Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

99.5

Cum

₹995

2.2

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick Design cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.

388

sqm

₹3,880

3Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :