Constructing Causeway to Tivadi Relewadi Bhatwadi Road Tal Chiplun Dist Ratnagiri

Excavationforfoundation in hard murum including shoring and strutting,dewateringas necessary and disposing off excavated stuff as directed etc. complete.

Excavation for foundation in hard rock by controlled blasting and including shoring and strutting,dewatering as necessary and disposing off excavated stuff as directed etc. complete.

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing and fixing 25 mm diameter steel anchor dowel in hard rock including drilling hole of 3 2mm diameter up to 0.75 mtrs depth, placing the dowel inposition and effectively grouting the hole with CM 1:1 proportion etc. complete.

Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand)

Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA

Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneissmetal in foundation including necessary formwork, compacting and curing etc complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )

Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 900 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and laying in situ/ ready mix M 20 CC of trap /granite/ quartzite/ gneiss metal for wearing course 8 cm thick including compacting,finishing,curingandfillinginjoints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant /pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc )

Providing,cutting,bending,hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete.

Providing and fixing stream lined M-20 grade RCC guard stone including mild steel bar reinforcement etc. complete.

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources)

Providing and fixing N.H . /S.H. Route Marker size 60 cm x 45 cm with one No.direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S.sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stovee namelled, bonded with cut out of red Retro reflective sheet Engineering grade,border/ letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100 % reflection including one One Number of M.S.Angle iron post of size 50 x 50x 5 mm of 3.65 m. long in flated at bottom drilled on to pin one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos .of high strength G.I. bolts and nuts of size 10 mm dia.and 20 mm long including all taxes, conveying, fixinging round with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc.complete. Mild Steel Route Marker with Engineering Grade

Test Reports

Royalty

Please Enable Macros to View BoQ information