Repair and restoration of damaged Saroya distribution system of outlet offtaking at rd 3775 m of Saroya distributary offtaking at Rd 112526 km right side of kandi canal stage-2

Amount

Excavation by mechanical means (JCB or Hydraulic Excavator) in trenches for pipe line with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade , cutting joint holes, refilling consolidation , watering including the cost of dewatering of rainwater , diversion for traffic, night signals providing and fixing and caution boards, crossing over trenches for access to houses, watching fencing etc and removal of surplus soil outside/inside the town involving lead upto 15 mtr Complete in all respect. Earthwork upto 1.50 mtr Depth

Filing sand in Alpha valve, air vent valve And Sluice valve chamber including supply and carriage of sand from local choe lead upto 25 km.,including loading and unloading and rehandling if any complete in all respect.

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 110mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 125mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 140mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 160mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 180mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 250mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 280mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 315mm

Supply & fixing UPVC riser from PVC pipe for release of water at different outlet complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 125mm

Supply & fixing UPVC riser from PVC pipe for release of water at different outlet complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 140mm

Supply & fixing UPVC riser from PVC pipe for release of water at different outlet complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 160mm

Supply & fixing UPVC Long bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 110mm 90 degree

Supply & fixing UPVC Long bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 160mm 90 degree

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in charge).200mm

Providing & fixing alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.110mm

Providing & fixing alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.125mm

Providing & fixing alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.140mm

Providing & fixing alpha valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.160mm

Supply and fixing flange tail end point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge180mm

Supply & fixing of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 110x110x110mm

Supply & fixing of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 125x125x125mm

Supply & fixing of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 140x140x140mm

Supply & fixing of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge 160x160x160mm

Supply & fixing of service saddle M.S. conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge 160mmx50mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 225mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 180mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 250mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 280mm

supply and fixing socket 6kg/cm2 icluding carriage , re-handling, loading ,unloading , testing , etc. complete In all respect as per PWD specification and instructions of the Engineer-in-charge. 315mm

First class brunt brick masonry laid in 1:5 cement sand mortar in foundation & plinth

Providing and fixing single air valve ISI marked as per IS-14845 including jointing cost of nuts and bolts and rubber insertion all carriage complete CI single air valve screwed sized 50 mm

Construction of masonary sluice valve chamber excluding sluice valve cover as per standard design and drawing of public health department. Size 0.6 m x 0.6 m

Construction of masonary sluice valve chamber excluding sluice valve cover as per standard design and drawing of public health department. Size 0.9 m x 0.9 m

12.5 mm thick cement plaster 1:2 cement sand mortar

Shuttering for precast and plain or Reinforced concrete blocks, wall plates, bedplates, shelves etc.

Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge Capacity of Air compressor 500 cfm at 150 PSI.

51 28.81 A Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge Capacity of Air compressor 300 cfm at 250 PSI (a)

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 90mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 200mm

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 2.5 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications 225mm

Supply & fixing UPVC riser from PVC pipe for release of water at different outlet complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. 110mm

Providing and laying RCC 1:2:4 for foundation slab mixed with volumetric type concrete mixer excluding steel reinforcement but including all labour charges complete in all respect as per PWD specifications and instructions of Engineer in charge.

Bridges- Foundations & Sub- Structure

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications.

any oher Item

MITTAL CONSTRUCTION COMPANY

Deepak Kumar Beetan