SPECIAL REPAIR TO BLAST PANE No 16 AND 17 AT AIR FORCE STATION SRINAGAR

Amount

Taking down wall and ceiling linings, boards(fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness,including cover fillets all as specified and directed by the Engr-In-charge

M&L for 5 mm thick solid PVC Sheet fillet of width 25 mm for wall paneling inclusive of fixing on to wall to make PVC Frames as per specification and drawing complete all as specified and as directed by Engr-in-Charge.

M&L for Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed by Engr-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed by Engr-in-Charge.

Material and Labour rendering 15 mm thick on outer faces of brick work or concrete surfaces in cement mortar 1 :4 including finished even and smooth mix with WPC @ 2% wt of cement (WPC Paid separately) complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound all as specified and as directed.

Roughening surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed by Engineer-in-Charge.

M&L for Bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight, 8 cm x 8 cm at the junction of roofing to vertical surface completed, all as specified and directed.

M&L for priming roof surfaces and applying water proofing treatment over roofs comprising of the following : (a) APP polymeric water proofing membrane minimum 3 mm thick and weighing not less then 3.00 Kg/sqm of Make : STP Texsa Ltd or hyper plas (Polyster),black finish reinforced with non -woven polyster matt wt not less then 150 gms/Sqm with thermo fusable finish laid over and including compatible bitumin primer at the rate of 0.40 Ltr/Sqm torching over laps with a propane or butene gas torch with a overlap of 75mm at the side and 100mm at the ends and sealing (b) applaying a coat of cold emulsion bituminious primer all as per manufacturers instructions incl prepration of surface complete all as specifiedand directed.Note :- The water proofing tretment shall bre got carried out by the manufacturer or their authorised applicators's duly approved by the GE in writing.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M & L for Rendering 10 mm thick in CM 1:4 as for backing coat of wall tiles complete all as specified and directed by Engineer-in-Charge

M & L for glazed ceramic (digital glossy finish) coloured tiles 300x300x7 mm thick on vertical surfaces, alongwith high lighter tiles set and jointed in neat cement slurry and pointed in white/colour cement to match over, Complete all as specified and directed by Engineer-in-Charge.

M&L Screed bed or bedding layer 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge.

M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white/coloured cement to match, Complete all as specified and directed by Engineer-in-Charge.

M & L for double charged Vitrified coloured tiles 7-10 mm thick dark shad (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new plastered surfaces of walls and applying two coats of weather paint (Apex) paint colour and tint as ordered in any pattern over and including 2 to 3mm layer of wall care putty and one coat of primer upto 15 metres height including sides and soffits of the beams, fascias, parapets etc, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel water tubing 15mm bore and connection complete all as specified and directed by Engineer-in-Charge.

S & F GI tubes 15 mm bore 'medium grade' with all fittings and fixed complete to walls and ceilings or laid in trenches or cutting chases in wall and making good to disturbed portion of wall complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel water tubing and connection complete 20 mm bore complete all as specified and directed by Engineer-in-Charge

S & F for Steel water tubing galvenised 20mm bore medium grade with all fittings and fixed to walls, ceiling or laid in floor complete all as specified and directed by Engineer-in-Charge

M & L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 25mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed by Engineer-in-Charge

S&F in repair vitreous china ware wash hand basin white flat back, size 630x450 mm including brackets complete all as specified and directed by Engineer-in-Charge.

S & F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.

S&F PVC waste pipe flexible for WHB of 32mm size complete all as specified and directed by Engineer-in-Charge.

S&F PVC cabinet mirror of size 450mmx600mm as approved by Garrision Engineer.

S & F in repairs wash down water closet (EWC) white with P or S trap including Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern and plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern and flush pipe, etc complete all as specified and directed by Engineer-in-Charge.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, low level 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm bib tap CP, cast copper alloy with capstain head screwed down screwed for iron pipe or for brass ferrule fancy type, complete all as specified and directed by Engineer-in-Charge.

S & F in repairs CP angle valve of cast copper alloy screwed down high pressure with capstain head screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S & F in repairs CP shower roses with CP Arms, 15mm bore, complete all as specified and directed by Engineer-in-Charge.

S & F in repair 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water, complete all as specified and directed by Engineer-in-Charge.

S & F in repair CP Jet Spray of Standard size for EWC alongwith CP connection pipe and all fittings as fixed Complete all as specified and directed by Engineer-in-Charge.

S & F in repairs CP Health faucet fixed with spring action and lever along with health faucet long pvc/cp chain 1.2 mtr for supply of water fitted in the existing water connection in the toilets, complete all as specified and directed by Engineer-in-Charge.

S & F in repairs, chromium plated towel ring of minimum dia 200 mm, complete all as specified and directed by Engineer-in-Charge.

S & F in repairs, chromium plated steel grating of maximum dia 150mm Complete all as specified and directed by Engineer-in-Charge

S & F in repairs, Toilet paper holder of brass CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Soap dish, brass CP any type, fixed to plugs with chromium plated brass screws Complete all as specified and directed by Engineer-in-Charge.

S & F in repairs rotational moulded three layered PVC water storage tank 1000 ltr cap (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed by Engineer-in-Charge.

M & L for complete removal of existig treatment of old painted surfaces of walls and applying two coats of weather paint (Apex) paint colour and tint as ordered in any pattern over and including 2 to 3 mm layer of wall care putty and one coat of primer upto 15 metres height including sides and soffits of the beams, fascias, parapets etc, complete all as specified and directed by Engineer-in-Charge.

Removal of mud/Filled Earth in roofs ,any thickness,including plastering and leaping (weather full thickness removed or only a part thereof) complete all as specified and directed by the Engr-In-Charge.

Forming Embankments including raising (or lowering) earth spreading in layers exc 30cm thick, watering, ramming/ rolling and finishing to required size/ shape etc, n-exc 1.50 m high from base complete all as specified and directed by the Engr-In-charge.

Ditto as above but each additonal height of 1.5 M or part thereof in height above the first 1.5 M complete all as specified and directed by the Engr-In-charge.

Taking down carefully copper/aluminium point wiring (light fan,socket or power) complete including fixture and fittings such as switches, ceiling rose, pendants, regulators sockets, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit for above item should be made as per condition seperatly) and making good disturbed surfaces of walls floors etc.

M&L Point wiring with 1.50 Sqmm PVC FRLS wire multistranded copper conductor, 1100 Volts grade, ISI marked, drawn through with and including stove enamelled steel conduit of size 20 mm dia ISI marked of reputed firm as directed including conduit accessories fixed with saddles on wall and terminal box (sunken box of MS/CI) concealed in wall with laminated sheet cover 3 mm thick over the terminal boxes with tin plated screw, washer including 1.50 Sqmm PVC FRLS multistranded copper conductor green code for earth continuity and connection upto earth dolly for One light or Fan point controlled by one switch, single pole, one way complete all as specified and directed by Engineer-in-Charge

M&L Point wiring with 2.50 Sqmm PVC FRLS wire multistranded copper conductor, 1100 Volts grade, ISI marked, drawn through with and including stove enamelled steel conduit of size 20 mm dia ISI marked of reputed firm as directed including conduit accessories fixed with saddles on wall and terminal box (sunken box of MS/CI) concealed in wall with laminated sheet cover 3 mm thick over the terminal boxes with tin plated screw, washer including 1.50 Sqmm PVC FRLS multistranded copper conductor green code for earth continuity and connection upto earth dolly for 15 Amps switch/socket on independent board complete all as specified and directed by Engineer-in-Charge

S&F Switch, piano flush type, 250 Volts, single pole, one way 6 Amps, ISI marked complete all as specified and directed by Engineer-in-Charge

S&F Switch socket combination 5 in 1, 6/16 Amps, ISI marked, flush type, 250 Volts, single pole, one way, complete all as specified and directed by Engineer-in-Charge

S&F Ceiling rose 3 terminal PVC/ Polycarbonate, isolated body, ISI marked complete all as specified and directed by Engineer-in-Charge

S&F in repair stepped type fan electronic fan regulator flush type ISI marked on the existing phenolic laminated sheet etc complete as specified and directed

S&F decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 16 watt luminaire all as specified & approved by EIC.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps C series breaking capcity 10 KA incl flush/surface mounting complete all as specified and directed.

S&F triple pole and earth enclosure with a three pin and earth plug with soekct complete with one triple pole MCB 32 Amp C series, 10 KA breaking capcicty incl flush/surface mounting complete all as specified and directed.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made 2 way SPN suitable for MCB DB's 240 Volts directed. Make- Legrand, CG, C&S, Havells ,Crompton equivalent approved by GE

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed directed. Make- Legrand, CG, C&S ,Havells ,Crompton equivalent approved by GE

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way TPN (VTP) suitable for MCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed. Make- Legrand, CG, C&S ,Havells ,Crompton equivalent approved by GE

S&F MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 6-32 Amp breaking capacity 10 KA etc all as specified and directed by Engineer-in-Charge

S&F MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 40-63 Amp breaking capacity 10 KA etc all as specified and directed by Engineer-in-Charge

S&F MCCB TPN 125 Amp fixed type 36 KA fixed thermal and fixed magnatic setting suitable for 415 volts complete all as specified and directed by Engineer-in-Charge.

S&F MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacity etc all as specified and directed by Engineer-in-Charge.

M&L Sub main wiring with two runs of single core of size 6 Sqmm PVC FRLS wire multistranded copper conductor, drawn through drawn through with and including stove enamelled steel conduit of size 20 mm dia ISI marked t with complte accessories with 6.0 Sqmm PVC FRLS wire multistranded copper conductor green code for earth continuity and connecting up with earth dolly with suitble size copper terminals conductor for giving connection complete all as specified and directed by Engineer-in-Charge

M&L Sub main wiring with Three runs of single core of size 6 Sqmm PVC FRLS wire multistranded copper conductor, drawn through with and including stove enamelled steel conduit of suitable size ISI marked with complte accessories with 6 Sqmm PVC FRLS wire multistranded copper conductor green code for earth continuity and connecting up with earth dolly with suitble size copper terminals conductor for giving connection complete all as specified and directed by Engineer-in-Charge

S&F LT bus bar chamber factory made weather and vermin proof made of 2mm thick MS sheet with 400 Amps rated aluminium bus bar for three phase with MCCB FP 400 Amp, 25 KA, 415 Volts 50 Hz with adjustable thermal and adjustable magnetic setting and provn for incoming and outgoing cables one neutral complete all as directed by Engineer-in-Charge

Supplying, laying, jointing and testing XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm 2 core on wall with suitable size of saddles and taking out of old unserviceable cable complete all as specified and directed by Engineer-in-Charge

Supplying, laying, jointing and testing XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 50 sqmm 4 core on wall with suitable size of saddles and taking out of old unserviceable cable complete all as specified and directed by Engineer-in-Charge

Supply and fixing Junction box made of mild steel 1.6 mm thick of size 250 mm x 200 x 150 mm including 04 Nos alunimum bus bar of 3 mm thick duly fitted on the suitable insulator with fixing arrangement and including SP MCB 6 Amps clamped with pole and taking out old unserviceable boxes complete all as specified and directed by the Engineer-In-Charge

S&F in repair LED flood light 150 watt IP66 high power flood light with pressure die cast aluminium housing complete with all accessories incl 3 core flexible cable from ceiling rose to connector of fitting etc complete as specified and directed by Engineer-in-Charge Make: Wipro cat pt no. LF20-192-060-57-G2 or crompton cat pt no. LFLN-150-CDL/60 or Havells cat pt no. HLFLD-ML01-150-CWL

S&F in repair LED flood light 100 watt IP66 high power flood light with pressure die cast aluminium housing complete with all accessories incl 3 core flexible cable from ceiling rose to connector of fitting etc complete as specified and directed by Engineer-in-Charge Make: Wipro cat pt no. LF20-122-060-57-G2 or crompton cat pt no. LFLN-100-CDL/60 or Havells cat pt no. HLFLD-ML01-100-CWL

S&F LED aviation light fitting 12 watt 230 volts 50 HZ inkling fixing arrangement on RCC top of ballast incl electrical connectionof fitting etc complete as specified and directed by Engineer-in-Charge Make Surya Cat Part No SLE AL 108 LDR SEN IP 65 or equivalent CG/Philips/Bajaj.

Earthing complete with galvanised steel earth plate electrode of size 60 x 60 cm x 6 mm thick , buried directly into ground vertically to a depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than 1.50 m below normal ground level, surrounded on all sides by 150 mm thick charcoal and common salt starting from ground below earth plate upto 150 mm above GI plate in alternate layers connected to galvanised earth lead wire of size 4 mm (8 SWG) by means of socket (lugs), bolts, nuts, check nuts and washers earth wire protected by 15 mm bore medium grade GI pipe laid in floor and fixed to wall with proper size of FI clamps and watering pipe, medium grade of size 20 mm bore including wire mesh funnel PCC 1:2:4 type B-1 using 20 mm grade stone aggregate including form work, cement mortar with height 300 mm above normal ground level including PCC pit cover with frame, necesary excn of earth work in any soil including testing on completion for desired result all as shown and specified in Electrical Plate No 5 of SSR Part-I

Note : (i) On testing after completion, if satisfactory resistance value of the eath is not obtained, the contractor shall have to redo the earthing without any extra cost to the department.

M&L in repair Earthing complete with copper earth plate electrode 60cmx60cmx3.15mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the copper strip 20x3 mm up to body of equipement by means nut bolt,check nuts and washer of brass copper, strip protected by GI pipe light grade 32mm bore incl provn of concrete pit in PCC (1:2:4) type B-I using 20 mm graded stone aggregate with CI cover and frame, watering pipe GI light grade 20 mm bore, perforated at bottom 1.75 mtr long placed on top edge of earth plate,eath plate surrounded by packed layers of comman salt and charcoal 15 cm thick all around to and bottom and test point with fixing arrangement GI funnel ,wire mesh and earth work in any type of soil, returing filling in and removal of surplus soil to a distance not exceeding 50 mtr all as shown in electrical plate No 3 of SSR part-I and connecting to earh test point complete all as specified and directed.

Note : (i) Main earthing lead from earth plate electrode to test point upto length of 7.50 mtr shall deem to be included in the unit rate quoted by the tenderer against this item. (ii) GI protection pipe and earthing strip beyond 7.5 mtr long shall be measured and paid seperatly (iii) Test result should be less than 1 ohms or satisfaction of user.

S&F copper strip of size 20 x 3.15 mm with saddles and fixing screws, etc., for roof conductors and down conductors above ground complete all as specified.

S&F air termination, single pointed aluminium rod having 12 mm dia and 300 mm long incl dismentaling of old/US air termination all as specified

Supply and fix in repair heavy duty exhuast fan 300mm, 900 rpm turbo force model single phase incl all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc complete as specified and directed by EIC Make -havells/ usha/ khetan

Supply and fix in repair ceiling fan 1200 mm sweep with all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc complete as specified and directed by EIC Make -havells/ usha/ khetan

M/S FAROOQ AND SONS

M/S A.R.TANTARY

M/S TARIQ AHMAD SHEIKH

M/S Abdul Ahad Rather

M/S GULZAR ENTERPRISES

M/S M.R. Construction

M/S BASHIR AND SONS

M/S KHAN ENTERPRISES

M/S Haji Zahoor Hussain Ganai