CA NO GE/C-18/2021-22 REPAIR/REPACEMENT OF INTERNAL ELECTRIFICATION OLD UNSV ELECTRICAL FITTING WITH LED LIGHT FITTING INCLUDING BLDG SECURITY LIGHTDB MCB MCCB LED FITTING FIXTURES OTHER MISC WORKS AT 1 ARMY HQ SIG REGT ARMY CYBER GP OLD

Amount

Taking down care fully copper/aluminium point wiring from wooden batten or conduits (light, fan, socket or power) complete excludding fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type and making good disturbed surfaces of walls, floors etc complete all as specified and directedby Engineer-in-Charge.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded new metal flush box duly make embossed, concealed in walls with for housing switches , socket out let and fan regulators etc , all as specified and as directed for the followings:- Note (i) PVC conduit shall be Medium grade, ISI marked.Make:- " Polycab, Kalinga Premium and AKG" (ii) PVC Cable Make:- "RR Kabel, Havells & polycab"

One light/fan/bell point controlled by one No one way switch

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

All as per item No 2 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15 socket outlet point on independent board. Note (i) PVC conduit shall be Medium grade, ISI marked.Make:- " Polycab, Kalinga Premium and Finolex" (ii) PVC Cable Make:-"RR Kabel, Havells & polycab"

M&L point wiring with PVC unsheathed multi stranded copper conductor cable 1.5 sqmm (nominal dia) FRLS 1100 Volts in existing PVC concealed conduit in new M S steel terminal boxes of wall thickness not less than 1.6mm including 3 mm thick laminated top sheet cover including using 1.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth all as specified and directed by Engr-in-Charge. PVC Cable Make:- "RR Kabel, Havells & polycab"

One light/Exh fan point controlled by one No one way switch

One bell / buzzer point controlled by one bell push

One light point controlled by two Nos two way switches

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

M&L point wiring with PVC unsheathed multi stranded copper conductor cable 2.5 sqmm (nominal dia) FRLS 1100 Volts in existing PVC concealed conduit in new M S steel terminal boxes of wall thickness not less than 1.6 mm including 3 mm thick laminated top sheet cover including using 2.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one power point, all as specified and directed by Engr-in-Charge. PVC Cable Make:-"RR Kabel, Havells & polycab"

M&L switch piano flush button type single pole one way 6 Amps complete all as specified and directedby Engineer-in-Charge. Make:- Havells Reo/ legrand/Anchor.

M&L in replacement switch piano 6 amp SP two way, ISI marked complete all as specified and directedby Engineer-in-Charge. Make:- Havells Reo/ legrand/Anchor.

M&L in replacement socket outlet 6 Amp flush button type complete all as specified and directedby Engineer-in-Charge. Make:- Havells Reo/ legrand/Anchor.

M&L in replacement bell push single pole 6 Amps complete all as specified and directedby Engineer-in-Charge.Make:- Havells Reo/ legrand/Anchor.

M&L in replacement switch piano flush button type single pole 16 Amps complete all as specified and directedby Engineer-in-Charge.. Make:- Havells Reo/ legrand/Anchor.

M&L in replacement socket outlet, 2 in 1, 3 pin 6 and 16 Amp single pole complete all as specified and directedby Engineer-in-Charge.. Make:- Havells Reo/ legrand/Anchor.

M&L in replacement regulator electronic switch type 5 steps suitable for 1200/1400 mm sweep 230 volts complete all as specified and directedby Engineer-in-Charge.. Make:- Havells Reo/ legrand/Anchor.

M&L in replacement bell electric (dingdong) 230 volt, SP complete all as specified and directedby Engineer-in-Charge.. Make:- Havells Reo/ legrand/Anchor.

M/L in replacement insulated body, angle holder with back plate ISI marked complete all as specified and directedby Engineer-in-Charge.. Make:- Havells Reo/ legrand/Anchor.

S&F ceiling rose surface PVC 65x50 mm type with three terminals. (For Exhaust Fans) complete all as specified and directedby Engineer-in-Charge.Make:- Havells Reo/ legrand/Anchor.

M&L in replacement sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket 240 Volts grade 10Amps complete with one single pole MCB 'C' series 10 A capacity all as specified and directed. Make:- Legrand/Indoasian/ABB.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directedby Engineer-in-Charge. (Make- WIPRO/HAVELLS/PHILLIPS/clair/Jaquar).

Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directedby Engineer-in-Charge. (Mirror light) (Make- WIPRO/HAVELLS/PHILLIPS).

Supply and fix LED 9/10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directedby Engineer-in-Charge. (Make- WIPRO/Havells/PHILLIPS/Clair/Jaquar).

supply and fix recessed mounting LED FLAT panel 2"x2" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20 Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directedby Engineer-in-Charge. Make WIPRO equivelent of Havells/Philips.

S&F in replacement of decorative type wall mounted luminaire with unbreakable poly carbonate materials suitable for 1x14 watt LED bulb B22 base complete all as specified and directedby Engineer-in-Charge. (Make - Philips comet/Havells CITY 1 or equivalent in JAQUAR/WIPROclair).

Supply and Fixing LED bulb 14 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified and directedby Engineer-in-Charge.(Make- WIPRO/Jaquar/PHILLIPS)

Supply and Fixing LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base complete all as specified and directedby Engineer-in-Charge. (Make- WIPRO/Jaquar/PHILLIPS)

Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to Make:- Legrand/Indoasian/ABB/Havells.

Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge. Make:- Legrand/ABB/ IndoAsian//Havells.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge. Make:- Legrand/Indoasian/ABB.

Supply and fix in repair MCCB 125 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting complete all as specified and directedby Engineer-in-ChargeMake:- Legrand/Indoasian/ABB/Havells.

Supply and fix in repair MCB SPN 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directedby Engineer-in-Charge. Make:- Legrand/Indoasian/ABB/Havells..

Supply and fix in repair MCB DP 40 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directedby Engineer-in-Charge. Make:- Legrand/Indoasian/ABB..

Supply and fix in repair MCB SP 6 to 32 Amps 240 volts 10 KA 50 HZ 'C' curvecomplete all as specified and directedby Engineer-in-Charge. Make:- Legrand/Indoasian/ABB.

Supply and fix in repair MCB SPN 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directedby Engineer-in-Charge Make:- Legrand/Indoasian/ABB/Havells.

S &F exhaust fan metal body 300 mm in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor from ceiling rose to fan, length as per requirement at site complete all as specified and directedby Engineer-in-Charge.Make : Orient /Bajaj/Havells

Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmmincluding writing MES NO. 2 CM height with synthetic enamelled black paint complete all as specified and directedby Engineer-in-Charge Make :Orient /Bajaj/Havells

Supply and fix in repair Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing metallic/ non metallic conduit in walls complete all as specified and directedby Engineer-in-Charge Make for wiring cable :- RR Kable, Havells & polycab" Note: Three runs of cable shall be measured as one RM

Supply and fix in repair Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories (Concealed/Surface) in walls complete all as specified and directedby Engineer-in-Charge. Make for wiring cable :- RR Kable, Havells & polycab".Note:- PVC rigid conduit ISI marked FRLS Grade Make: Polycab, Kalinga Premium and AKG" Note: Three runs of cable shall be measured as one RM

Supply and fix in repair Sub main wiring complete with two runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 10 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing metallic/ non metallic conduit in walls complete all as specified and directedby Engineer-in-Charge Make for wiring cable :- RR Kable, Havells & polycab"

M&L for earthing complete with galvanized steel earth plate 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints including excavation and earth work, GI pipe light grade 15mm bore for protection of G.I. wire from earth electrode to the Main switch/Distr Board, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B-1 using 20mm graded stone aggregate chamber and MS angle iron frame 40 x 40 x 3 mm and RCC cover 40 mm thick RCC (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, round, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified and directedby Engineer-in-Charge

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recessed or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc 4 mm dia galvanised or steel wire complete all as specified and directedby Engineer-in-Charge

Cutting the existing wall/removing existing steel bar to make a hole for fixing of exhaust fan through packing of wooden ply to support the ventilating/ air circulating fan including necessary nut and bolts of suitable size incl make good of disturbed surface complete all as directed by Engr-in charge.

Supply and Fix in repair 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete all as specified and directedby Engineer-in-Charge. (Make Wipro/Bajaj/Havells/clair /jaquar/ philips.

S & F PVC Gang box surface type heavy duty suitable for single 5 Amps switch & socket complete all as specified and directedby Engineer-in-Charge (ISI Marked) Make- Legrand or equivalent in Havells/Crabtree.

S & F Gang box surface type heavy duty suitasble for 15 Amps switch and socket complete all as specified and directedby Engineer-in-Charge (ISI Marked) Make- Legrand or equivalent in Havells/Crabtree.

Supply only hylum sheets 3 mm thick (ISI marked) of the following sizes :-

Sheet 4" x 4" single cutting suitable for one piano switch

Sheet 4" x 4" two cuttings suitable for two piano switches

Sheet 4" x 7" three cuttings suitable for three piano switches

Sheet 4" x 7" one cutting for 6 Amp socket and two cuttings for piano switches

Sheet 8" x 10" incl cuttings for switches and sockets 6/16Amps as directed.

Sheet 10" x 12" incl cuttings for switches and sockets 6/16Amps as directed.

M & L for in replacement only single core PVC insulated cable 1.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge. Make:- " "Finolex, Havells polycab RR kable ".

M & L in replacement for only single core PVC insulated cable 2.5 Sqmm FRLS 1100 Volts with copper multi stranded conductor and drawing in existing concealed conduits , all as specified and directed by Engr-in-Charge. Make:- " "Finolex, Havells & polycab" RR kable .

M&L in replacement copper cable flexible 3 core PVC insulated of size 23/.0076 ll as specified and directed by Engr-in-Charge. Make:- ""Finolex, Havells & polycab RR kable" .

M&L in replacement copper cable flexible 3 core PVC insulated of size 40/.0076 ll as specified and directed by Engr-in-Charge. Make:- ""Finolex, Havells & polycab RR kable" .

S & F hole fastner madeup of MS 6" long with complete nut bolt all as specified.Make:as per sample

S & F hole fastner madeup of MS 4" long with complete nut bolt all as specified.Make:as per sample

S&F in replacement factory made epoxy powder coated switch disconnector fuse unit TPN with sheet metal enclosure confirming to IS 60947-3, 200Amps, positive isolation suitable for DIN & Bolted HRC fuse links fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts. Make :-Havells/INDOASIAN/ABB.

S&F in replacement GI Pipe bracket bent to shape drilled welded made out of light grade GI pipe 25mm dia 1.5 mtr long and fixing on the wall where as directed by the Engr-in-Charge for fixing of building security light fitting including clamps, nuts, bolts and washers complete all as specified by the Engr-in-Charge .Make:as per sample

Refixing of Ceiling fan / exhaust fan/ fresh air/ Wall mounted fan including taking down and corryign out necessary repairs/ replacement of unserviceable/ wornout part and testing the same as per entire satisfaction of Engr-in- Charge complete all as specified and directed. Note- Spare Parts shall be measured and paid separately under relevant item of supply only.

M&L for opening up the winding of ceiling fan 1200 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete. Teating of the ceiling fan after refixing in position to the entire satisfaction of Engr-in-Charge.

All as above item No 53 but 1400mm sweep complete. Teating of the ceiling fan after refixing in position to the entire satisfaction of Engr-in-Charge.

S&F in replacement capacitor of 2.5 MFD, Make :Orient/Epcos/Havells.

Supply only gun metal bush of any size and make sutiable for ceiling fans 1200/1400 mm compete all as specified and directed.

Supply only ball bearing No. 6202, Make: SKF/NBC/TATA

Supply only ball bearing No. 6203, Make: SKF/NBC/TATA

Supply only worn out shaft, beyond economical repair of existing ceiling fan any make, type or size as per original one ceiling/exhaust fan complete all as directed.

S&F Ceiling fan blade suitable for 1200mm sweep of any make with suitable size as per site requirement complete all as specified and directed.(As per sample)

S&F in replacement Ceiling fan blade suitable for 1400mm sweep of any make with suitable size as per site requirement complete all as specified and directed.(As per sample)

M & L for painting of ceiling fans , in situ with synthetic enamel paint by spraying including filling cavities with filler, one or more coat to achieve even and smooth surface after cleaning all dust etc.and endorsement of fan no.with black synthetic enamel paint complete all as directed.

Supply only exhaust fan motor capacity 1/4 HP 230 volts suitable for 250 mm size exhaust fan complete all as directed.

Taking down carefully geysers 25/35/50 ltrs capacity opening for inspection reassembling and re-fixing in position after carrying out repairs rates included for replacement of pressed rubber gasket nuts, bolts etc complete all as directed. Note- Spare Parts such as tank, apparatus plate, outer body base plate shall be measured and paid separately under relevant item of supply only.

Supply only base plate assembly (confirming to ISI ) complete for 25/35 Ltrs capacity copper tank geyser including inlet, outlet and thermostat pipe with drain plug and screws for fixing the element inclusive of clamps for holding the elements with nut, bolts & air release valve suitable for any type/make of geysers installed at site as directed.

S&F in replacement of thermostat for 25/35/50 ltrs capacity of geysers complete all as directed. Make-THEETA/Elcon/USHA

S&F in replacement heating element of 1.5 KW triangular type with nut bolt washer complete all as directed. Make-THEETA/BAJAJ/USHA

M & L in replacement non return valve 15mm dia (ISI Marked) for Geysers of 50/35/25 Ltr capacity including GI Socket,Nipple, elbow ,bend etc and connecting up complete all as directed.

M&L in replacement for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge.

M & L in replacement chromium plated copper connection pipe 60 Cm long with two brass adopters and connecting up complete all as directed.

Supply only inner steel tank for geysers of capacity 25/35 ltr as per existing of approved make complete all as directed

M&L in replacement sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket 240 Volts grade 20Amps complete with one single pole MCB 'C' series 20 A capacity all as specified and directed. Make:- Legrand/Indoasian/ABB/Havells.

S &F Wall Mounted fan 400 mm 3 blade white colour, 1330 RPM, in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site.Make : Orient /Bajaj/Havells

Supply and fix in repair MCCB 160 Amps, FP 415 volts 16 KA 50 HZ with thermal magnetic setting .Make:- Legrand/Indoasian/ABB/Havells.

Supply and fix surface ceiling mounted, round LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. (Make-Wipro/ Havells/ Phillips/clair/Jaquar).

S&F PVC canopy upper and lower of celing fan of any make & size complete with nuts, bolts & washers as per sample approved (As per sample).

S&F ceiling fan down rod 0.6 mtr long duly made out off mild steel including rubber bush nut, bolt, washer and split pin complete all as specified and directed.

S&F exhaust fan Metal blade suitable for 225/300mm sweep of any make with suitable size of split pin as per site requirement complete all as specified and directed.(As per sample)

M & L for painting of exhaust fans complete, in situ with synthetic enemel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as spd and directed.

M&L in replacement plug top, 3 pin, 10/20 amp earth metal clad (ISI marked) complete all as directed. Make:- Havells Reo/ Anchor/Indoasian.

S&F in replacement socket 3 pin 10/20 amp earth metal clad (ISI marked) as directed. Make:- Havells Reo/ Anchor/Indoasian.

Supply only outer body/cover suitable for 25 ltr cap geyser made out of mild steel pre-treated and stove enamelled sheet of 18 SWG complete with top and bottom cover, rubber gasket, stead screw for fixing the top and bottom cover to outer body including two coat of white synthetic enamel paint over one coat of red oxide (spray painting) all asdirected by Engineer-in-charge.

Supply only top cover for geysers (confirming to IS) suitable for any makes/capacity/type of geysers installed at site duly painted (spray) in two coats with enameled (Deco) paint of colour & shade as directed.

Supply only bottom cover for geysers (Confirming to IS) suitable for any make/capacity/type of geysers installed at site duly painted (spray) in two coats with enameled (Deco) paint of colour & shade as directed complete with inspection plate in two pieces.

M&L for providing protection pipe PVC or flexible pipe as reqd at site to out going cables, cleaning of LT panel boards with air blower cleaning inside, dressing in proper alignment complete, replacement of rusted iron parts with new one with suitable size of angles/strips, painting of new parts with matching clolour as per existing, tightening of fixing bolts and nuts, providing thimbles to whole bunch of wires uniformly clean manner etc complete all as directed by Engr-in-Charge.

Note :- Total amount of Sch of credit is Rs. 85984.50 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

M/s Adhikari construction co.

Pall Associates

LAMBA ENTERPRISES

M/s Sohanil Construction

aggarwal engineers contractors

GIAN ENGINEERS

KRISHANA ELECTRIC WORKS

m/s VK construction company

satyabhama and co