CERTAIN B/R REPAIR IN PLASTERING FLOORING PLUMBING SANITARY FITMENT MISC WORKS AND WELCOME MAINTENANCE FOR OFFRS ACCN AT 2003 STN/ CERTAIN REPAIR/ REPLACEMENT AND CLEANING OF SEWAGE LINE MANHOLE SEPTIC TANK SOAKAGE WELL AT 2003 STN UNDER GE (AF) GURG

Taking down Shutters of any description exc 1 sq. m and n exc 2 sqm each

Taking down Chowkat or frames with shutters(without taking off shutters from the frames) exc 1.5 but n.exc 4.00 sqm each

Taking down and romoving Chowkats or frames not exc. 1.5 sq.m with shutter (without taking off shutters from the frames) complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as specified.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.Note the area includs in this up to 4th stories building

S&F powder coating anodised aluminium section for shutter/frame for door, window and ventilator complete all as specified.

S & F powder coated frame sections for doors and windows approved and fixed all as specified and directed. (Note : (i) Paneling such as glass , Gauge etc will be measured and paid saperately.(ii) The rate quoted under this item deemed included for necessary jointing cleates, glazing clips, alluminium beading, screws, rubber packing and locking devices & in built handles for sliding windows. However, no element on account of weight will be taken into consideration for these item.(iii) Floor door spring/locks/tower bolts/ handles/ door closure/hinges for doors measured saparately.(iv) Size of door / windows shall be all as directed at site.(v) Grills will be measured saparately.(vi) Second class hard wood batten of appropriate size to be inserted inside the frame for fixing hinges and the same is included in the rate quoted.)

S & F plain sheet glass 5 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as directed by Engr-in-Charge (Note:- Beading/rubber packing is included in the rates for aluminium sections above.)

M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S & F in repairs 125x60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate, etc. complete as specified.

S & F in repairs 105x60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate, etc. complete as specified.

S&F factory made soild PVC moulded dorr shutter 28 to 30 mm thick(stiles), with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain color pvc sheet on back face supplying and fixing in frame complete all as specified and directed

S&F PVC Door Frame for moulded door shutter of size 50mmx47mm made out of 5mm colour PVC sheet reinfoced with MS Square tub, suppling & fixing in opening as per specification and drawing.

S&F 125 mm Butt hinges, meduim weight, cold relled stainless steel and fixed complete all as specified and directed

S & F for aluminium anodised, barrel tower bolts of extruded section 150 mm long and fixed complete all as specified and directed

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

S&F 35 mm thich 2nd class Hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, guaze etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securiing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20(a) and fitted to chowkats.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side.

S & F for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of exctruded sections or cast aluminium alloy and fixed.

S & F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M&L Glazed coloured ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed .

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4 complete all as specified and as directed .

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer of mortar for lying floor finished in Cement Mortar 1:4..

M&L 25mm thick Cement concrete 1:2:4 type B-O(using 12.5mm graded aggregate) as in flooring, finished surfaces even and smooth without using extra cement.

M&L for rendering 15 mm thick in CM (1:3) mixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement in sunken portion of toilet etc complete all as specified and as directed Note: WPC will be measured and paid separtely

M&L for two coat of painting with Dr Fixit fast Flex (or equivalent) water proofing liquid including preparation of new plastered surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L cement concrete 1:5:10 type E-2 using 20mm granded crushed Brick aggregates as in sunken portion of WC etc complete all as specified and as directed

Taking up or down steel tubing 15 mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

Taking up or down steel tubing 20mm bore, and connections, including cleaning for re-fixing or removal to store in repairs complete all as specified.

S&F 15 mm bore CPVC tubes with all fittings and fixed complete to walls and ceilings or laid in floors.

S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.

S & F in repairs 15mm bore Bib taps, fancy type chromium plated cast copper alloy with crutch or butterly handle, screwed down, screwed with cup for iron pipe or for brass ferrule and fixed complete all as specified and directed

S & F in repairs 15mm bore Stop Valve/ angle valve fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends with cup for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs 15mm bore Pillar taps central hole Basin mixer with regular spout without popup waste system with 450 mm long braided hosedd 20 mm carttridge size fancy type, cast copper alloy, chromium plated, complete all as specified and directed.

S & F in repair single towel rall 450mm long fancy type chromium plated fixed with PVC plug and steel screw complete all as specified and directed.

S & F in repair towel ring round with round flange fancy type cromium plated fixed with PVC plug and steel screw complete all as specified and directed.

S & F in repair soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

M & L in repair for hand shower (health faucet) with 18mm dia 1.20 m long(min) flexible tube and wall hook complete all as specified and directed.

S & F in repair for PVC conection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed

S & F in repair Swivel shower of PTMT any colour forfixing with 15mm pipe. (Minimum weight40gms complete all as specified and directed.

S&F in repair vitreous China wash basin white, flat back (min size 550x400 mm or as required) including S&F 32mm dia waste coupling, waste PVC pipe complete all as specified and as directed.

S&F in repair vitreous China Squatting pan 'Orrisa' pattren size(min size 580x440mm) white with integral foot rest, 'P' or 'S" trap cement concrete bedding complete all as specified and directed.

Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve float, handle including bracket complete all as specified and directed with glaged finish.

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and smooth without using extra cement.Note the area includs in this up to 4th stories building

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:4 finished surface even and smooth without using extra cement. Note the area includs in this up to 4th stories building

M&L for 10mm thick Rendering on ceiling surface fair faces of brick work or concrete sureces in Cement Moratar 1:3 finished surface even and smooth without using extra cement. Note the area includs in this up to 4th stories building

S& F in repair stain less steel decorative cutrain rod of 25 mm bore inluding 2 nos steel finale and bracket 02 nos etc and fixed to wall with plastic rowl plug and steel screw complete all as specified and directed.

S & F 600mm x 450mm mirror of thickness 5.0 mm with chromium plated brass spacers 25 to 30 mm in size in each corner including rounding the edges of the mirror and fixed-in-repairs complete all as specified

M & L for prepring old plaster surface by applying 1-2 mm thick wall care putty applying one coat Oil Bound distember on wall surface with roller brush complete all as specified and directed.

M&L for applying subsequent Coat of oil bound distemper complete all as specified and as directed.

M & L for new plaster surface applying two coat Oil Bound distember on wall surface with roller brush complete all as specified and directed.

M & L for prepring old plaster surface applying one coat of oil bound distemper on ceiling surface with roller brush complete all as specified and directed.

M&L preparing old Decorated/Treated/rough Plastered surfaces of Walls by brooming down or steel wire brushing and scraping down and applying one Coat of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint (as per Manufacturer's instructions), complete all as specified and as directed.

M&L applying subsequent Coats of Weather Coat Exterior Paint (in Camuflage/Plain pattern as ordered) with approved Tint (as per Manufacturer's instructions), complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over pink primer.

M&L Preparing old painted surfaces of wood of any description, not otherwise described, over 10cm width or girth and one coat of synthetic enamel paint.

휀ࠀ♍⁌潦⁲牰灥牡湩⁧汯⁤慰湩整⁤瑳敥湡⁤物湯猠牵慦散⁳景愠祮搠獥牣灩楴湯‬癯牥ㄠ挰湩眠摩桴漠⁲楧瑲ⱨ渠瑯漠桴牥楷敳

Taking down existing damaged APP membrane and clean the surface , frost, surface laitance and contamination and free from loose aggregate, iclean with water complete all as directed by Engr-in-Charge.

M&L for PCC 1: 2 :4 Type B-1 (using 12.5 mm graded stone aggregate) as in padding over roof slab laid to slope finished even and smooth, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. (Note : Rates are included upto G+2 Storey)

M&L for 10 mm thick cement plaster with CM 1:4 smooth finish for application of waterproof coating primer the surface clean with water complete with making the corner plain and smooth all as directed by Engr-in-Charge. (Note : Rates are included upto G+2 Storey)

Supply only Integral Water Proofing Compound, ISI Marked, as approved, complete all as specified and as directed.

M&L for cleaning the newly plastered surfaces thoroughly with wire brushes and providing water proofing treatment all as specified here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) 3mm thick APP polymeric membrane minimum weighing 3 Kg/Sqm laid by torch application method with over laps of 100 mm joints of traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company (c) Applying two coat of aluminium paint @ 100ml/Sqm

Supply and fix Godrej pattern mild steel cup board with shutter made out of 1.00 mm thick M.S. sheet 60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete and dismantling of old/rusted cupboard frame and shelves. The cost of grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured) complete all as specified and as directed .

M&L Steel Work in Tubular Trusses including Special shaped Washer etc. complete using ERW or Induction Butt Welded Tubes, confirming to IS-1161-1979 Grade-240, including dismantling old steel complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L Removing Complaint of Blockage (viz Blockage in Bath, Kitchen, WC & Drainage in Traps/Line from Trap to 1st Manhole, Blockage in Sewage Line from 1st Manhole to Septic Tank, Cleaning of Manhole) by deploying Trades Men as per Stipulated Time Frame from 9.00 AM to 5.00 PM (Complaints as per MES Complaint register), complete all as specified and as directed.

M&L Clearning Choked Sewer Lines of 100 mm dia and over upto any depth, Manually or thorough Mechanical Appliances and Making Sewer Line Functional complete including Working Under Foul Condition and depositing the sludge, rubbish, etc. off the Premises outside the MOD/AF Land or Sewage Treatment Plant, complete all as specified and as directed.

敢⁤湡⁤灡汰楹杮漠敮挠慯⁴景猠湹桴瑥捩攠敮慭慰湩⁴潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥‮Œ¯ƊȈ䴀䰦删浥癯湩⁧慍桮汯⁥潃敶⁲湡⁤敄汳摵楧杮䐯獥汩楴杮䌯敬湡湩⁧景攠楸瑳湩⁧慍桮汯獥漠⁦慶祲湩⁧敤瑰⁨楦汬摥眠瑩⁨汓摵敧戠⁹敭湡⁳景䴠湡慵汬⁹牯琠牨畯桧䴠捥慨楮慣灁汰慩据獥挠浯汰瑥ⱥ圠牯楫杮唠摮牥䘠畯潃摮瑩潩湡⁤敲敳瑴湩⁧桴⁥慍桮汯獥䌠癯牥椠慳敭倠獯瑩潩湡⁤敤潰楳楴杮愠摮爠浥癯污漠⁦汓摵敧‬畒扢獩ⱨ攠捴‮景⁦桴⁥牐浥獩獥传瑵楳敤䐠晥湥散䰠湡Ɽ挠浯汰瑥⁥污獡猠数楣楦摥愠摮愠⁳楤敲瑣摥戮᐀挀ጀ踀ࠂ♍⁌敄慷整楲杮匠畬杤⁥牦浯匠慯慫敧圠汥獬 敳瑰捩琠湡祢倠浵楰杮漠瑵愠⁳敲畱物摥琠敫灥琠敨䌠浯汰瑥⁥敓慷敧匠獹整湩漠摲牥愠摮愠⁳潴愠潶摩愠祮传敶⁲汦睯湩⁧景匠睥条⁥慗整⁲湩汣摵湩⁧敲潭楶杮漠⁦潓歡圠汥慷整⁲異灭摥漠瑵愠⁳畳档漠瑵猠摩⁥景䐠晥湥散䰠湡⁤祢洠慥獮漠⁦畐灭⁳湡⁤慔歮牥⁳䌨灡捡瑩⁹景圠瑡牥吠湡敫⁲桳污敢㔠〰‰楌牴獥 獡爠煥極敲⁤湩汣摵湩⁧灏牥瑡湩⁧湡⁤畓数癲獩牯⁹瑓晡⡦⥳猠獡琠敫灥琠敨眠潨敬匠慴楴湯愠敲⁡潐汬瑵潩牆敥‬潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤獡搠物捥整⹤上呏⁅›慅档吠楲⁰景吠湡敫⁲潴戠⁥慴敫畏⁴楳敤漠⁦位⽄䙁䰠湡⁤湩瀠敲敳据⁥景䨠⁅湩䌭慨杲⹥†桔獩椠据畬敤⁳敤汰祯敭瑮漠⁦敮散獳牡⁹♔⁐湡⁤潮桴湩⁧桳污敢倠楡⁤硅牴⹡ǧ"ǫ#ƙȈ匀䘦椠敲慰物ㄠ〱浭戠牯⁥噐⡃坓⥒瀠灩獥猠湩汧⁥潳正瑥摥椠湡⁹敬杮桴†牰獥畳敲爠瑡湩⁧䬴⽧煓挠洠摥畩片摡⁥楦數⁤潴眠污獬眠瑩⁨汣浡獰漠⁲慬摩琠汦潯⁲牯琠敲据敨⁳楷桴搠獡⁨桴潲杵⁨畮⁴湡⁤潢瑬愠⁴癥牥⁹洲牴氠湥瑧⁨湩汣摵湩⥧†湩汣摵湩⁧愠汬映瑩楴杮⁳潣灭敬整愠汬愠⁳灳捥晩敩⁤湡⁤楤敲瑣摥戠⁹湅楧敮牥椭⵮档牡敧ਮ潎整⁳›桔⁥牁慥椠据畬敤⁳湩琠楨⁳瑩浥⁳潴眠牯楫杮椠桳晡⁴潰瑲潩灵潴㈠猠潴楲摥戠極摬湩⹧W$`ɐȈ匀䘦椠敲慰物ㄠ〱洠潢敲倠䍖匨剗 楰数⁳楳杮敬猠捯敫整⁤牐獥畳敲爠瑡湩⁧㑀杋匯ⁱ浣洠摥畩牧摡⁥湩愠祮氠湥瑧⁨楷桴爠扵敢⁲楲杮樠楯瑮‬楦數⁤潴眠污獬漠⁲慬摩椠汦潯⁲牯琠敲据敨⁳湩汣摵湩⁧慴楫杮搠睯慥敶ⱳ朠瑵整獲爠楡慷整⁲楰数⁳愨祮猠穩⁥牯瀠瑡整湲 湩汣摵湩⁧污楦瑴湩獧吨敥‬汥潢⁷瑥⥣挠浯汰瑥⁥污獡猠数楣楦摥愠摮搠物捥整⁤祢䔠杮湩敥⵲湩挭慨杲⹥†††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††††丠瑯獥㨠吠敨䄠敲⁡湩汣摵獥椠桴獩椠整獭琠潷歲湩⁧湩猠慨瑦瀠牯楴湯甠瑰琶⁨瑳牯敩⁤畢汩楤杮䠮␀匀Ḁ＀♍⁌牰灥牡湩⁧敮汷⁹汐獡整敲⁤畳晲捡獥漠⁦慗汬⁳祢愠灰祬湩⁧慗汬倠瑵祴ㄠ琠⸱‵浭琠楨正Ⱐ挠瑵楴杮爯扵楢杮琠扯慴湩摥愠匠潭瑯⁨畓晲捡⁥湡⁤灡汰楹杮吠潷䌠慯獴漠⁦敗瑡敨⁲潃瑡䔠瑸牥潩⁲慐湩⁴楷桴愠灰潲敶⁤楔瑮漠敶⁲⁡潣瑡漠⁦牐浩牥⠠獡瀠牥䴠湡晵捡畴敲❲⁳

Each TRIP

Cleaning of Sewage pipe line (RCC/SGSW) of Upto 300mm bore by means of sewage cleaning jet machine /Super sucker machine and clean out the sluge /liquid mud or any other obstruction material to any depth including nesesarry rodding, working in foul position and depositing of sludge/silt/liquid mud beyond the premises of MOD land etc complete with all specified pressure rating and complete all as directed by Enge-in-charge. Note :- All other arrangment of electricity, water, etc included in quoted cost.Also the jet machine/super sucker machine to be deployed and work for atleast 8 hours in one day incl atleast 05 person of labour to carry out neccessary cleaning of manhole/sewer line at the time of deployment of machine in the station.

Taking down PVC (SWR) pipes of any description with fitting and making good to disterbed surfaces.

Taking up or down Steel Tubing 25mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed. Notes : The Area includes in this items to working in shaft portion upto 6th storied building.

S&F in repair 25 mm bore dia galvanized steel tubes medium grade with all fittings required etc and their making good, complete all as specified and direced.

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation or shafts,wells,cesspits,manholes,pier holes,cable laying,sewage/water lines etc complete and getting out in soft/loose soil complete all as specified and directed.

Demolition and breaking of drain pipes of 150 mm dia (Salt galzed ware, AC or Reinforced concrete set in cement mortar etc complete all as directed

Demolition and breaking of drain pipes of 100 mm dia (Salt galzed ware, AC or Reinforced concrete set in cement mortar etc complete all as directed

M&L for double wall corrugated drain pipes of 150 mm dia bore class SN-8, laid and jointed using rubber ring joints complete with collars etc complete all as specified and as directed.

M&L for double wall corrugated drain pipes of 100 mm dia bore class SN-8, laid and jointed using rubber ring joints complete with collars etc complete all as specified and as directed.

Returning filling in including spreading leveling watering and well ramming in layer not exc 25cm thick all as specified and directed

Removal of surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.50 mtr above the starting point complete all as specified.

Demolition of cement concrete (reinforced) in any description and in any postion not otherwise specifically provided for etc complete all as directed

M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded crushed stone aggregates as in cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and as directed Note - Reinforcement shall be measured and paid separetly

M&L for TMT bars upto 10mm dia as in reinforcement for concrete, cut to length, bent to shape required including cranking , bending spiraly for hooping for columns, hooking with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in bed of drain foundation, filling and mass concrete complete all as specified and directed.

M&L for Brick work with sub class "B" Old size bricks, straight or curved on plan to any radius in cement mortar (1:4) as in half brick wall and pointed flush in same mortar as work proceeds on one side complete all as specified.

M&L Brick work with sub class ‘B’ bricks(old size brick), straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:4) and external face of brick work pointed flush in the same mortar as the work proceeds, complete all as specified and as directed

M&L Brick work with sub class ‘B’ bricks(old size brick), straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:4) and external face of brick work pointed flush in the same mortar as the work proceeds except bricks, complete all as specified and as directed

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone agggregate as in surface channel drain and bedding including necessary form work and weathering, slightly rounded or chemfered angles complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds,mitred/stopped ends etc complete all as specified and as directed

M&L for cement concrete 1:2:4 type, B1 (using 20 mm graded crushed stone aggregates) as in copings including necessary use and waste of formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type D-2 (using 40mm graded stone aggregate) in sub base of floor or as in floor complete all as specified and as directed .

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor or plinth protection complete all as specified and as directed .

M&L for Rubber Pressed, Pre-Cast concrete interlocking coloured paving block of glass fibre reinforced vibro compacted any shape and size conforming to IS-15658:2006 of 60mm thickness made with M35 grade concrete match with grey cement and pigment etc including 20 mm thick sand cushioning complete all as specified and directed.

M&L for exterior grade coloured, glossy finished, rubber pressed precast chequered cement concrete tiles 30cmx30cmx20-25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete including 20 mm thick sand cushioning all as specified and directed

M&L for preparation of old concrete surface as in kerb stone or hard standing and applying Two coat of synthetic enamel paint etc complete all as specified and as directed

M& L preparing old for rough cast plastered surfaces of walls and applying two coat of arcylic weather coat exterior paint with approved tint over a coat of primer (as per manufacturer instructions) ,complete all as per specified and directed

M&L for Framed work such as gate, grills, gratings with angle frames, flat plates etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including dismantling of old steel works complete all as specified and directed

M&L for Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and directed

S&F 30-35 mm thick RCC jali in wall/TRCC columns including dismantling old RCC Jali all as specified and directed

S & F for 8 mm dia or over MS bars as in strainers for chain link fencing including necessasary welding and fixing to angle iron complete all as specified and directed.

Dismantling fencing wire mesh, any type etc complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and any type of standards, rails, straining bolts etc.

S & F in repair galvanised 2 strand steel barbed wire 2 mm dia barbed with 2.3 mm dia barbs at 75 to 80 mm spacing and straining, fixed to fencing post tieing at crossing with and including galvanised mild steel wire complete all as directed.

Supply only Chain link MS galvanised fencing , any size or type all as specified and directed

Supply, febrication and fixing of stainless steel 304 grade letters smooth finish as per sample provided (Hindi/ English) on granite wall/Steel sheet made out of 1 mm thick stainless steel sheet (minimun size not less than 40mm thick, 100-150 mm in width and 300-600 mm hight) and 10 mm dia, 75mm long MS studs weld with back side of letters as per site requirement fix on granite wall/Steel sheet making holes by drilling machine and studs fix with epoxy adhesive/nut bolts complete all as directed by Engr-in-Charge.

M&L for type B0 1:2:4 (12.5 mm graded aggregate)Providing precast cement concrete louvres and jallies of type B0 1:2:4 (12.5 mm graded aggregate), 25mm thick set in 1:4 cement mortar including fixing in existing frame complete all as specified and directed

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old stone slab/ wall tiles complete all as specified

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as spd and directed

M&L for 1.25 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Please Enable Macros to View BoQ information