SPL REP TO WATER SUPPLY INFRASTRUCTURE S/BY POWER SUPPLY EXTERNAL LIGHTS WORK ACCESSORIES AND PROVN OF CERTAIN MISC WORKS AT REPORTING AREA AT 4 AFSB VARANASI UNDER

Amount

Excavation in trenches n exc. 1.5 m deep and n.exc.1.5 m wide in any type of soil and forming bottom surfaces for laying of cable/water pipe line complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers n. exc. 25 cm complete all as specified and directed.

Removal surplus soil at a distance n. exc. 50 m and deposited where diredted at a lavel not exc. 1.50 m above the starting pont complete all as specified and directed.

Taking up CI water mains of 80 mm dia including all fittings with spigot and socket ends and lead joints including buring out joints and recovering lead, removal to MES store yard complete all as specified and directed by Engr-in-Charge.

All as per item No. 4 above but size 150 mm dia complete all as specified and directed by Engr-in-Charge.

Material & laying , fixing in trenches cast iron pipe with spigot and socket ends centrifugally cast class " LA" in any length 80 mm bore all as specified and directed. ( run lead joint shall be measured and paid for separately.)

All as per item No. 6 above but size 150 mm dia complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement sluice valve of 80 mm dia ISI marked with cast iron body bonnet wedge stuffing box galvanized thrust plate band plate wheel of gry cast iron ,operated with heigh tensil brass spindle, wedge body seal ring and wedge facing lead tin brass bolt and nut compressed fiber bolt pressured rating PN-I confirmed to 14846 including material and labour for jointing flange joint with rubber / fiber jointing ring bolt nut and washers etc complete all as specified.Make Remco/ Kirlosker/BIR.

All as per item No. 8 above but sluice valve of 150 mm dia complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement CI reflux ( non return ) valve 150 mm bore as per IS 5312 with GM working parts both ends flanged and suitabely machined and drilled for and including required nut , bolts washer rubber/ fiber packing complete all as specified and directed. Make Remco/ Kirlosker.

S & F in replacement CI fittings for spigot, socket pipes such as, bends( any type radius and angle) , tapers any type (straight bends in increasing , decreasing or double socket etc.) Tee pieces ,single branch, 'Y' junctions , double branch, cross ( all sockets or socket and spigot), collars , caps and plugs suitable up to 150 mm bore complete all as specified .

All as per item No.11 above but fixing only complete all as specified and directed by Engr-in-Charge.

M & L for run lead joints for spigot and socket CI pipe and fittings for the 80 mm bore sizes complete all as specified and directed by Engr-in-Charge.

All as per item No. 13 above but for size 150 mm bore complete all as specified and directed by Engr-in-Charge.

Supplying and laying in replacement steel water tubing medium grade galvanised with all fittings like bend, tees socketes union etc. as required laid in trenches/ or on wall / laid under floor/ ceilings complete all as specified of the 50mm bore size.

All as per item No. 15 above but for 40mm bore complete all as specified and directed by Engr-in-Charge.

All as per item No. 15 above but for 25 mm bore complete all as specified and directed by Engr-in-Charge.

All as per item No. 15 above but for 20 mm bore complete all as specified and directed by Engr-in-Charge.

All as per item No. 15 above but for 15 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipes suitable for 50 mm bore dia of pipe complete all as specified and directed by Engr-in-Charge.

All as per item No. 20 above but for 40mm bore complete all as specified and directed by Engr-in-Charge.

All as per item No. 20 above but for 25 mm bore complete all as specified and directed by Engr-in-Charge.

All as per item No. 20 above but for 20 mm bore complete all as specified and directed by Engr-in-Charge.

M & L straight plain brass ferrules ( or connnecting screws ) screwed both ends and fixed for the 25 mm bore diameter of pipe complete all as specified and directed by Engr-in-Charge.

All as per item No. 24 above but for 20 mm bore complete all as specified and directed by Engr-in-Charge.

S & F in repair chromium plated fancy type bib taps,cast copper alloy with crutch or butterfly handel,screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm bore dia of pipe complete all as specified and directed.

Dismantling and taking out complete assyembly of submersible pump set of 41 HP capacity of any make from the existing bore including 45 meter column pipe of size 150 mm bore flanged type ( ERW steel pipe) with jointing material i.e. rubbeer packing ,nuts , bolts and washer etc. by using T & P required for the purpose complete in all respect and deposit to store for keeping in safe custody or for repair as directed by Engineer-in-Charge.

Development of existing bore well by means of 250 PSI Air compressor for not less than 08 hrs under dirctiions of Engineer - in - Charge complete all as specified and directed.

Development of tube well by over pumping until clear discharge is met complete all as specified and directed by Engr-in-Charge.

Supply , installation / lowering and commissioning the submersible pump set with strove lined non return valve directly coupled with and including induction motor of 35 HP capacity for operation on 415 Volts +/- 10% , three phase , 50 Hz & pump having 5 stage complete with necessary accessoried specified by manufacturer , suitable for 1450 LPM discharge of water at 75 meter head . Make-Penguin / KSB or any other make specified in PS.

Supply, connecting and testing (in replacement or for extention) of PVC insulated and sheathed water proof cable wih standard copper conductor flat submersible cable 1100 V grade complete all as specified for cross section area of 25 Sqmm 3 core.

Supply and lowering / fixing MS coloumn pipe 150mm bore flange type and 7.1 mm thickness ERW steel pipe including jolinting material i.e. rubber packing nuts, / bolts washers etc.

S & F for demolition of old unserviceable valve chamber and construction of new valve chamber of size 0.9m x 0.9m x 0.9 mtr with brick work comprising the following items complete all as specified and directed. (a) 150 MM thick PCC foundation (1:2:4) type B2 40 MM graded aggregrate. (b) Brick construction with (1:6) cement mortar and rendering 15 mm thick externally and internally complete fair face of brick works surface in cm (1:4). (c) MS cover of thickness 4 mm double door type welded to angle of size 40 x 40 x 5 mm embedded in cement coping in PCC (1:2:4) tye B-0 wirh anchor fastner including locking arrangment complete with two coat of heighly corresive resistant apoxy point over one coat of red oxide primer.

Supplying,installation in replacement ,testing,commissioning of LT panel board 3 phase 4 wire system indoor type factory made wall mounting with suitable clamp dust and vermin proof cubical type interlocking arangement ( IP- 55 protection) fabricated with 2 mm thick CRCA sheet with Anti corrosion coating & finally polyester powder coated of finite green fuly compartment with providing with suitable size of aluminum strip all as specified for the following. (a) Incomming :-(i) On load Change Over Switch 200 Amps , 4 pole 01 No.(ii) MCCB 200 AMPS 4 pole 415 Vollts 35 KA -01 No.(iii) Digital type Amp Meter 0-200 Amp with CT's 03 Nos.(iv) Digital type voltmeter 0-500 Volts -01 No.(v) Indicating lamps (RYB) 01 set of 3.(vi) Aluminium bus bar rating 300 Amps 3 phase neutral-01 set. (vii) Chamber for incoming & outgoing cable. (b) Outgoing :-(i) MCCB 125 AMPS 4 pole 415 Vollts 35 KA -02 No.(ii ) MCB TPN 32 AMPS 10 KA -01 No.(iii) In built automatic star- Delta starter suitable for submersible Pump upto capacity 50 HP complete with all accessories and wiring complete. Make Havells/ L & T.

M&L earthing complete with galvanised steel earth plate 600X600X6.3 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth strip of 32X6 mm as earthing leads by means of bolts, nuts, check nuts and washers beside Welding / brazing at all joints as shown on drawings and including excavation, earth work. GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed.

Supplying & Fixing GI electrode chemical earthing of high conductive, corrosion resistant, CPRI tested maintenance free chemical earthing pit, to achive earth resistance value less than or equal to 3 Ohme, pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and secondary conductor having 80 MM dia. The primary conductor is inserted into secondray conductor and spce between secondary and primary conductor of earthing electrode should be filled with crystalline compound. The length of this electrodes is min 3000 MM (3 meters) and earth pit's bore hole should be of dia 200 to 250 mm and min depth 3.50 meters. Length of electrode will be increase with connecting of 32 x 6 mm GI strip extra, and total depth of earthing electrodes should not less than 3.50 meters. Around the earth electrode earth pit bore hole should be backfilled with minimum 50 Kg of ground enhencement compound ERIC ( ERIC Contains mixture of Silica sulphate, Alumina, Iron Oxide, titanium Oxide, Calcium Oxide, Magnesium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 CI chamber cover all as directed by Engineer-in-Charge. ( Note : If less than 3 Ohme result has not acheived at site the contractor is responsible to do grid system to achieve the desired result and no extra payment shall be made to the contractor for making grid system.) Make Remedies, Model - RSPL-G803 / MRS agency Model G-80.

Supplying & Fixing Copper electrode chemical earthing of high conductive, corrosion resistant, CPRI tested maintenance free chemical earthing pit, to achive earth resistance value less than or equal to 2 Ohme, pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and secondary conductor having 80 MM dia. The primary conductor is inserted into secondray conductor and spce between secondary and primary conductor of earthing electrode should be filled with crystalline compound. The length of this electrodes is min 3000 MM (3 meters) and earth pit's bore hole should be of dia 200 to 250 mm and min depth 3.50 meters. Length of electrode will be increase with connecting of 32 x 6 mm copper strip extra, and total depth of earthing electrodes should not less than 3.50 meters. Around the earth electrode earth pit bore hole should be backfilled with minimum 50 Kg of ground enhencement compound ERIC ( ERIC Contains mixture of Silica sulphate, Alumina, Iron Oxide, titanium Oxide, Calcium Oxide, Magnesium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 CI chamber cover all as directed by Engineer-in-Charge. ( Note : If less than 2 Ohme result has not acheived at site the contractor is responsible to do grid system to achieve the desired result and no extra payment shall be made to the contractor for making grid system.) Make Remedies / MRS agency.

Supplying & Fixing Copper electrode chemical earthing of high conductive, corrosion resistant, CPRI tested maintenance free chemical earthing pit ( each set will be in grid of three earthing ) to achive earth resistance value less than or equal to 1 Ohme & EN voltage < 01 V, pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and secondary conductor having 80 MM dia. The primary conductor is inserted into secondray conductor and spce between secondary and primary conductor of earthing electrode should be filled with crystalline compound. The length of this electrodes is min 3000 MM (3 meters) and earth pit's bore hole should be of dia 200 to 250 mm and min depth 3.50 meters. Length of electrode will be increase with connecting of 20 X3.15 mm copper strip extra, and total depth of earthing electrodes should not less than 3.50 meters. Around the earth electrode earth pit bore hole should be backfilled with minimum 50 Kg of ground enhencement compound ERIC ( ERIC Contains mixture of Silica sulphate, Alumina, Iron Oxide, titanium Oxide, Calcium Oxide, Magnesium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 CI chamber cover all as directed by Engineer-in-Charge. ( Note : If less than 1 Ohme result has not acheived at site the contractor is responsible to do grid system to achieve the desired result and no extra payment shall be made to the contractor for making grid system.) Make Remedies / MRS agency.

M & L for fabrication and installation / errection of sign board (as marker of earth pit ) made out of 3.15 mm thick MS flat iron plate of size 150 mm wide and 250 mm length and shall be welded properly with angle iron support of size 300 X 300 X 4.0 mm thick of length 800 mm in which 300 mm will be embedded in PCC foundation of size 30X30X35 cm depth below ground level with cement concrete of ratio 1:4:6 type B1 using 20 mm graded stone aggregate and slope copping not less than 100 mm above GL including plastering,white washing of masonary surface and two coaats of synthetic enamelled paint of coloure as directed over a coat of red oxide primer on steel surfaces as well as writing following details in capital letters form of 25 mm height and 10 mm width on front side of the steel plate in black colour paint all as specified and directed . (a) Type of earthing (b) Equipment connected.(c) Number of earth pit & earth resistance value. Note :- Flat iron plate will be modified as triangular / circular / rectengular etc. as per sketch / dircted by Engineer - in - Charge but not exceeding the dimentions as given in schedule

Supply & Fix earth continuity conductor or main earthing lead fixed to wall on battten or recess or chases or buried in ground or drawn in conduit /pipe or fixed to pole or any other indicated situatioin for loop earthing etc. as required size 20 X 3.15 mm copper strip complete all as specified and directed.

All as per item no 40 above but of size 32 X 6 mm GI strip complete all as specified and directed.

Supply & laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm thick over the cable complete all as specified and directed.

Supply & laying brick for protection of cable sub class 'B' laid dry flat across the cable with width equal to the length of whole bricks complete all as specified and ditected.

Labour for boring, holes for inserting of 50/40 mm bore GI pope under the road/hard standing or any other location not less than 1200 mm deeep complete all as specified and directed.

M & L in replacement GI pipe 20 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

M & L in replacement GI pipe 40 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

M & L in replacement GI pipe 50 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.

Taking down the existing defective LT UG cable from trenches / pipes / pole for fault finding / replacement, all as specified and directed of any size between 10 Sq mm to 50 Sq mm 3.5 core/4 Core. ( Note-Excavation and earth work will be measured and paid seperately under relevant item. )

Supply and laying ,jointing and testing XLPE insulated extruded PVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 10 Sqmm 4 core.

All as per item No 49 above but size 16 sq mm 4.0 core complete all as specified and directed.

All as per item No 49 above but size 35 sq mm 3.5 core complete all as specified and directed.

All as per item No 49 above but size 50 sq mm 3.5 core complete all as specified and directed.

Supply laying fixing in replacement or passing through pipe 1100 Voltage grade heavy duty cable with PVC insulated and sheathed aluminium conductor comfirming to relevent IS size 6 sqmm 2 core unarmoured and connecting to system complete all as specified and directed.

Supply and fix in replacement FRP , hot press moulded SMC pole box 295X255X120 mm comprising of 100 Ams aluminium bus bar 4 strips ( IP 55 protection ) with one MCB SP 6 Ams to be fixed inside the box and box will be clamped bottom of the pole with FI clamps (duly painted ) nut bolt washers of required size.Make - SINTEX ,Model GSJB-2520 or any other sample approved by GE.

S & F bracket made with GI tube light grade (not less than 1.2 RM) in length of 40 mm bore size and fixed to the LT pole with the help of two Nos FI Clamps of size 50X6 mm nut bolt and washers,complete all as specified and directed.

Taking down existing street light fitting/flood light/post top lantern of any type and make & capacity complete all as specified and directed.

Supply and fix roadway luminaire LED light fittings of 60 watts and including necessary electric connection with 2.5 Sqmm twin core Copper conductor unarmoured cable, complete all as specified and directed. Make Bajaj /CG/Philips /Havells.

All as per item No.57 above but of 72 watts complete all as specified and directed.

All as per item No. 57 above but of 90 watts complete all as specified and directed.

All as per item No. 57 above but of 120 watts complete all as specified and directed.

Supply and fix LED Flood light 60 W IP 66 including necessary electric connection with twin core twisted flexible copper conductor cable of suitable size .Make Bajaj /CG /Havells.

All as per item No. 61 above but of 120 watts complete all as specified and directed.

All as per item No. 61 above but of 200 watts complete all as specified and directed.

Supply and fix LED post top lantern 25 W made in cast aluminium spigot housing with decorative opel polycarbonate diffuser and IP 65 protection including necessary electric connection with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make Bajaj /CG/Philips /Havells.

All as per item No. 64 above but of 35/40 watts complete all as specified and directed.

Supply, install in replacement, connect & testing cubical outdoor type factory made double door , powder coated LT bus bar feeder pillar box having alluminium bus bar suitable for 200 amps 3ph and neutral arrangement of size 500mm x 500mm x 200mm with MCCB 4 pole 100 A as incoming including provision of LED Indicating lamps (RYB) 01 set of 3. complete weather proof and vermin proof conforming to IP-54 made out of 3.15 mm thick CRCA sheet including provisions for ventilation and cable termination alley & two Nos suitable size of aluminum strip for body earthing all as per IS. It should be mounted on 40 x40 x 6mm angle frame with a clearance of at least 0.45 mtrs above GL and 0.30 mtrs below ground including required PCC for foundation complete all as specified and directed.

Supplying,installation,testing,commissioning of LT panel board 3 phase 4 wire system outdoor type factory made free standing,floor mounting with suitable PCC foundation dust and vermin proof cubical type (back door opening) interlocking arangement (IP- 55 protection) fabricated with 3.16 mm CRCA sheet with Anti corrosion coating & finnaly plyester powder coated of finite green fully compartment with providing with suitable size of aluminum strip all as specified for the following. (a) Incomming :-(i) MCCB 125 AMPS 4 pole 415 Vollts 35 KA -01 No.(ii) Digital type amp meter 0-200 Amp with CT's 03 Nos.(iii) Digital type voltmeter 0-500 Volts -01 No.(iv) Indicating lamps (RYB) 01 set of 3.(v) Aluminium bus bar rating 200 Amps 3 phase neutral-01 set.(vi) Chamber for incoming & outgoing cable. (b) Outgoing :-(i) MCCB 63 AMPS 25 KA 415 Volts 4 pole -02 No.(ii) Din rail multifunction digital timer switch Make GIC model 67DDTO -03 Nos.(iii) Power contactor 4 pole 40 amps Make L & T .-03 Nos.

Supply, erecting and fixing in true vertical position steel tubular swaged pole 8.5 Mtr long type (410 SP -22) conforming to IS 2713 part I & III - 1980 complete with cast iron base plate, pole cap, mild steel, bolts, nuts and screws, welded and reduced section and longitudinal weld seam throughtout entire length of pole including two coats of black bituminous paint throughtout internally and externally upto planting depth and remaining exterior portion of pole with two coats of aluminium paint over a coat of red oxide primer complete including transporting the poles to plating & providing three bends/strap with paint red signal/post office colour 300 mm apart from plinth block & numbering of poles complete all as specified and directed and including foundation with the following : (a) Excavation in post holes in any type of soil , return filling, well ramming and disposal of surplus soil to a distance not exceeding 50 mtrs from the starting point.(b) PCC (1:3:6 ) type C2 using 40 mm graded stone aggregate as in foundation. (c) PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping , including necessary form work.

Dimolation and dimantling PCC ( unreinforced) of any description and in any position complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping , including necessary form work complete all as specified and directed.

M&L for preparation of old painted steel surface and painting of steel tubular pole upto 09 RM long applying two coats of aluminium paint on complete poles including cross arms and writing of numbers on pole with black paint in 40 mm font size of letters including surface dressing all around the poles approximetely 01 Sq Mtr area complete all as specified and directed at site.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for point wiring with two single core 1.5 sqmm cable (nominal area) stranded copper conductor, PVC insulated unsheathed cable, 1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box, 1.6 mm thick of suitable size and modular white cover plate with frame of suitable module and wiring to be terminated in pressed steel sunken boxes including all accessories and using single core 1.5 Sqmm (nominal area) stranded copper conductor, PVC insulated unsheathed cable as in earth wire (green colour) connected to common earth dolly complete all as specified and directed for following :- (a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board complete all as specified and directed.

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch complete all as specified and directed.

All as per item no 87 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size complete all as specified and directed.

S&F Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete as specified and directed by Engineer in charge.

M&L Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

M&L Modular Socket outlet Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed by Engineer in charge.

M&L for Modular Switch piano, flush type single pole, one way 16 Amp all as specified and directed..

S & Fix ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

Taking down old and u/s light fittings conventional type from wall surface / ceilling or any position and making good the disturbed surfaces all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Taking down carefully unserviceable DB any type/size disconnecting and making good disturbed surfaces complete all as directed

Supply and fixing factory made epoxy powder coated distribution board TPN vertical loadline, 4 Pole, 4 ways Single door, suitable for MCCB as incoming ,with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.Make : Havells, L&T or equivalent in indo asian

Supply and fixing factory made epoxy powder coated distribution board TPN, 4 Pole, 4 ways Single door, suitable for MCB as incoming ,with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.Make : Havells, L&T or equivalent in indo asian.

Supply and fixing factory made epoxy powder coated distribution board SPN 12 ways single door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.Make : Havells, L&T or equivalent in indo asian.

Supply and fixing factory made epoxy powder coated distribution board SPN 4ways single door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.Make : Havells, L&T or equivalent in indo asian.

Taking down carefully unserviceable MCCB, MCB SP/SPN/Isolator of any rating/size complete all as specified and directed.

Supply and fixing 415V 16KA MCCB TPN/FP poles and current carrying capacity of 100 AMPs in the DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) TPN/FP poles and current carrying capacity of 63 AMPs in the DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB single pole & neutral 240 volt 'C' curve 10 KA 25 to 32 Amps in the DB complete all as specified and directed .

Supply and fixing MCB single pole 240 volt 'C' curve 10 KA 5 to 32 Amps capacity in the DB complete all as specified and directed.

Taking down ceiling fan/wall mounted fan by unscrewing nut , bolts, disconnection of electric cable from ceiling rose, ceiling cable end, removing blades , of any sweep and make and deposit to MES Store all as specified and directed.

Supply & Fixing ceiling fan 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less direct current (BLDC) motor, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM ( tolerance as per IS : 374 - 2019), THD less than 10 % ,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing and including writing MES No complete all as specified and directed.

Taking down old and u/s sub main wiring of 2/3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etc complete all as specified and directed.

M&L for concealed sub main wiring using two single core PVC insulated, unseathed FRLS multi stranded copper conductor cable of size 6.0 Sqmm of voltage rarting upto and including 1100 volts drawn in and including concealed PVC conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, FRLS multi stranded copper conductor of size 6 qmm as earth continuity conductor all as specified and directed. (Note : Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)

M&L for concealed sub main wiring using two single core PVC insulated, unseathed FRLS multi stranded copper conductor cable of size 4.0 Sqmm of voltage rarting upto and including 1100 volts drawn in and including concealed PVC conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, FRLS multi stranded copper conductor of size 4 qmm as earth continuity conductor all as specified and directed. (Note : Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)

Supply and fixSingle pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 25 Amps complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F glazed coloured ceramic tiles in vertical surfaces of size 450X 350X 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat of 10 mm thick in cement mortar 1:3.including taking down cement plaster, raking out joints, hacking for key scrubbing down with water etc as on wall upto 1.20 M height complete all as specified and directed.

M&L for two coat of oil bound distemper on walls over one coat of 2mm thick wall care putty after complete preparation on new plastered/disturbed surfaces of walls complete all as specified and directed.

PANDEY TRADERS (BID ID -3147768)