PROVISION OF FABRIC TENSILE STRUCTURE CONE SHAPED WITH MS FRAME FOR COVERED PARKING SHED NEAR R 32 BUILDING AT NEW NAVY NAGAR COLABA MUMBAI

Amount

Surface dresssing n.exc 15 cm deep soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc.1.5m wide and not exc 1.5 m in depth for foundations of walls and not exc 10 Sqm on plan and n. exc 1.5 m in depth in soft/loose soil.

M&L for plain cement concrete 1:4:8 type D-2 (40 mm graded stone agg) as in foundtions filling and mass concrete completed all as specified and directed.

Excavation in post holes in any type of soil (or similar holes ) each n.exc 0.50 cum,getting out,returning,filling in and ramming earth or broken rubble and removing surplus soil all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggegate as in floor, finished the surface even and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal whilst the concrete is green all as directed .

S & F Galvanised tubular or cone shaped steel work any size as required (dia can vary between 50mm to 300mm) for making tense PVC fabric shed including special shaped nut bolts/washers connecting plates required for making solid foundation etc complete using ERW or induction buit welded tubes conforming to IS 1161-1979 grade St-240 Note : The cost includes bendng to any shape of tubes weldng, fabrication that would be required during making of the shed at site or factory made. The design will be suggested during execution of site complete all as specified and as directed including painting with two coats of synthetic enamel paint over one coat of red oxide primer.

S & F waterproof PVC fabric with Acrylic & PVDF (Polyvinyl-idene-fluoride) coating with all necessary fixtures of any size and shape or tensile canopies etc which is to be attached with galvanised steel structural where ever required during excution for making sheds weight of the fabric is considered, with fabrics ranging from 800gsm to 1500 gsm Note . The tensile strength and tear strength of PVC fabric with grade specification should be produced before Engineer-in- Charge before the installation completed all as specified and asdirected ( Note Cost of Galvanised Steel used will be measured and paid separately)

Returning, filling in trenches using excavated soil, spreading, levelling, watering and well ramming in layers not exc.25cm

Removing excavated soil and demolised material exc 5 Km but n.exc 10 Km out side MoD land complete all as specified and directed

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cm 1:6 complete all as directed by EIC.

M&L Cement Concrete type D2 (1:4:8) (Using 40 mm graded stone aggregate) 75 mm thick in floor sub base

M/L screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:4 all as directed

M&L Non-skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc ste and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed by Engr-in-Charge.

M&L plastering 20mm thick in CM 1:4 on brick or concrete surfaces on external surface of walls in two coats (15mm thick backing coat and 5mm thick setting coat) mixed with water proofing compound finished fair & even without using extra cement.

M & L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement.

M&L Prepration of new plastered surfaces of walls, pillars, cornices and applying two coats oil bound distemper over a coat of primer including prepration of surface complete all as specified and direceted.

M&L for preparing new plastered surfaces of wall and applying two coats of Acrylic base paint exterior grade (100% Acrylic) including bio washing etc. complete all as specified.

M&L 100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded stone aggegate as in sub base complete all as specified and directed

M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in subbase to floors all as specified and directed.

M&L broken stone or boulders of hard core n exc 63 mm deposited, spreaded and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

M&L for sand cushioning under interlocking paver blocks watering and compact complete all as specified & directed .

M&L Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 grade complete all as specified and directed

M&L for 20 mm thick screed bed or beding layer for laying floor finishes in CM 1:6 complete all as specified and directed

M&L for prepolished coloured chequerd floor tiles of size 300x300x25 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed. Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately)

JANKI ENTERPRISES (BID ID -3083303)

SHREE JAGDISH FURNITURE CO. (BID ID -3074978)

Unitech Enterprises (BID ID -3081325)

SHRI SAI ENTERPRISES (BID ID -3076347)