GE 874/EWS-28/2022-23

Amount

B/R and E/M Portion

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads upto required slope gradient, camber etc complete all as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out in any type of soil and getting out complete all as specified and directed.

Removal of excavated material to a distance exc. 250mtr but n.exc. 500mtr and depositing where directed at a level n.exc 1.5m above the strating point all as specified and as directed.

Removing of excavated material (soils) to a distance n.exc 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for Hardcore of broken stone boulder gauge of n.exc. 63mm, deposited, spread and levelled in layer n.exc. 15cm thick, watered and rammed to a true surface.

Returning filling in including spreading leveling watering & well ramming in layers n.exc 25cm thick complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone agg) as in sub base of floor.

M&L M-30 design mix cement concrete using 20 mm graded crushed stone aggreate as in road pavement using mechanically vibrated and bull nosing / rounding off edges, curing, broming, belting, etc complete all as specified and directed by Engineer-in-Charge.

Forming contraction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound grade 'A'.

Excavating in post holes (or similar holes) not exc. 0.5 cum each and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F galvanized steel tubing, medium grade,15 mm bore with all fittings and fixed to walls and ceiling or laid in floor all as specified and as directed.

S&F galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed to walls and ceiling or laid in floor all as specified and as directed.

M&L for second class soft wood clean sawn timber framed and fixed in scantlings complete all as specified.

S&F plywood, grade BWP type BB fixed with screw to timber frame of 6mm thick as in cupboard shutter complete all as specified and directed.

S&F 6mm veenered decorative Plywood, grade1 BWR with resin with a decorative face veneers on one faces, fixed in wall, with screw to timber frame complete all as specified and directed.

Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified, supplied and fixed.

Powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

M&L for two coat of oil bound distemper over a coat of wall putty complete all as specified and as directed.

S&F Brass chromium plated bottle traps for 32mm bore hole, wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete.

S&F Vitreous china wash basin, while, flat back, size 580X450 irun (for Hospital use) excluding taps, waste, chain and plug and porcelain stopper but including brackets complete including cutting for and pining in ends of brackets or erecting stand etc complete all as specified and as directed.

S&F Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and as directed.

M&L for brickwork with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 as in wall/septic tank/soakage well all as specified and directed.

M&L for Brick work with sub class B bricks, straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and as directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished the surface even and smooth without using extra, complete all as specified and as directed.

M&L of rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished the surface even and smooth without using extra, complete all as specified and as directed.

M&L for two coats of OBD over a coat of wall care Putty on newly plastered wall surfaces complete all as specified and directed.

Two coats of synthetic enamel paint (1st grade quality) to new plastered surfaces in camouflage pattern/single shade of wall of any description, not otherwise described over 10 cm width or girth including preparation of surface complete all as specified and as directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection and finished even and fair complete all as specified and as directed.

S&F Mild steel works in tubular trusses/purlins/rafters etc including special shaped washers etc complte using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240.

M&L 40mm thick PCC 1:2:4 type B1 (20mm graded aggregate) as in flooring finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L Vitrified Ceramic tiles Light shade 10 mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed in cement mortar 15mm thick all as specified and directed.

Vitrified Ceramic tiles Dark shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with screed bed in cement mortar 1:4 complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7-8mm thick, area exc. 0.11sqm but n.exc. 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with 15mm thick screed bed in cement mortar 1:4 and 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone agg) complete all as specified and as directed.

M&L 25mm dia curtain rod mild steel powder coated fancy type with fixing arrangement for window and door the length shall be 450mm longer than the openeing size all as specified and directed.

S&F Mild steel sections as in Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections), distance pieces, cleats etc of E-250(Fe 410-W) including fabrication, erraction and fixing complete all as specified.

M&L Mild steel Plates (plain or chequered) forming holes, without cut or notched (ordinary and counter shunk) forming holes, without any attachments all as specified and directed.

M&L for applying two coats of sythetic enamel paint over a coat of red oxide primer including preaparation of new steel surfaces of any description over 10cm width or girth not otherwise described all as specified and directed.

M&L Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one heaxagonal or square nut, exc 10cm and n.exc 15cm long, diameter of neck in 11 to 15mm complete all as specified and directed.

Form work to sides of concrete foundations, footings bases of columns, raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work ; vertical or to batter etc for finished surface of concrete complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc for fair finished surface of concrete complete all as specified and directed.

M&L Mild Steel TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.

M&L Mild Steel TMT bars 6 to 8mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooking for column, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to FS-410 all as specified.

M&L RCC M-25 as in foundations, including rafts, column footings, foundation beams, plinth beams, bases of columns etc basement slabs, under reamed plies and mass concrete etc complete all as specified.

M&L for RCC M-25 Columns, pliiars , posts and struts cmplet alla s specified and directed.

S&F stop valves cast copper alloy, fancy type, chromium plated, screwed down high presuure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe.

S&F bib taps cast copper alloy, fancy type, chromium plated, screwed down high presuure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe.

S&F Vitreous China Wsah down water closet (Pedastal pattern) white including plastic water closet seat and cover closed pattern with flat bottom and mild steel chromium plated or aluminisd hinging device & including P or S trap and connection to trap and to flushing system anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F PVC valveless syphonic type low level flushing cistern 10 ltr capacity white with flush pipe & all fittings complete all as specified.

S&F Rotational moulded polyethylene water storage tank of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I.

S&F ball valves, high pressure, with polythene float and flynut 20mm bore complete all as specified.

S&F 20mm bore gun metal globe gate valve with iron wheel head, screwed down both ends complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete.

PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe, fixed, complete all as specified and directed.

PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe, fixed, complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore fitted with oval access door complete all as specified

S&F PVC (SWR) bends suitable for 110mm dia PVC (SWR) pipe complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore fitted with oval access door complete all as specified

S&F PVC (SWR) reducers any radius 110 mm bore complete all as specified and directed.

S&F PVC (SWR) 110mm bore junction, (single T) equal or unequal with access door cmplte all as specified.

S&F PVC (SWR) 110mm bore junction, (single Y) equal or unequal with access door cmplete all as specified.

PVC (SWR) vent cowl 75mmdia

M&L PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement.

M & L for Vitreous china wash basin, vertically mounted fancy bowl flat back size 550 x 400 m including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets& waste Pipe complete.

M&L for coloured glazed ceramic tiles as in skirting/ dado (350x250 or 450x350) x 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile over and including backing coat/screed bed 10mm thick in Cement Mortar 1:4 on fair faces of brick/stonewall surffaces for laying dado/skirting complete all as specified and directed by Engr-in-Charge.

20 to 25mm machine cut, kota stone slab, in single piece, in window cill, riser of steps, skirting, dado and pillar and similar work, laid over and including backing coat, in cement mortar 1:4, 15 mm thick, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beeswax polish complete all as specified and as directed.

9mm thick E board semi perforated coloured armstrong tiles of size 610x610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.55mm as main runner, 25x25x1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at perimeter including GI wire of 6mm adjustable suspender of required length of any description (Note:- The design and specification of the ceiling board to be approved by User/AGE/GE) compete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F Pillar taps fancy type 15mm bore, cast copper alloy, with capstan heads, chromium platrd, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete and fixed.

Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified. Make : Finolex/Anchor/Polycab

Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified. Make : Finolex/Anchor/Polycab

All as per description of item above but for 3-pin socket out let 5 Amps on same board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.

Point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 4.00 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 2.5 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified. Make : Finolex/Anchor/Polycab

M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.

Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor

S&F Switch socket combination 2-in-1 5 pin 5 Amps flush type (ISI Marked) complete all as specified and as directed by Engr-in-charge.

Supply & fixing Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor

Supply & Fixing Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed.Make : Havells/Anchor

Supply & Fixing ceiling rose surface backelite 65x50mm two to three terminal (ISI marked).Make : Havells/Anchor

Supply and fixing lamp holder bracket type, PVC/polycarbonate type with skirt cap suitable for batten fittings, complete all as specified and direted.Make : Havells/Anchor

Supply and fix LED Bulb 9 Watt . Make Havells/Bajaj

S&F LED light fitting 1x9W / 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

S&F Sheet metal enclosure factory made for DBs single pole and neutral single door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/lEGRAND/SSK.

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification. Make : Havells/lEGRAND/SSK.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 10 Sqmm complete all as specified and as directed by Engr-in-Charge.

Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 core complete all as specified and directed

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3cm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test all as specified or indicated including testing on completion.

Supply and fix exhaust fan, steel bodyAC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-Charge.

Supply and fixing Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 110 V to 290 V with output voltage stabilized at 230 V with accuracy of ± 2.5%, 4-6 Sec initial delay and of capacity 6.6 KVA /30 A Make V-Guard Model No VGMW1000PLUS or equivalent as approved by Engr-in-Charge.

Storage water heater (Geyser), vertical type, of 25 ltr capacity of inner tank, outer tank, syphon assembly, thermostat heating element, safety valve etc complete all as per manufacturer design and specifications including making of all fixing arrangements complete having BEE Five Star Rating including grouting of nuts and bolts and necessary PCC work as specified and directed by Engineer-in-Charge. Make : Havells model Monza DX HSN code 8516 or equivalent as approved by Engr-in-charge.

M/S SAJAA CONSTRUCTION COMAPNY

M/S GAFFARA CONSTRUCTION CO

Bidder Name

M/S SAJAA CONSTRUCTION COMAPNY

POPULARHARDWARESTORE

M/S GAFFARA CONSTRUCTION CO