COMPREHENSIVE REPAIR AND PERIODICAL SERVICES IN HOSP WARDS, QUARANTINE CENTRE AND ISOLATION CENTRE BEING REVERTED FROM COVID TO NON COVID FACILITIES AT BASE HOSPITAL, FMSD AND VET LAB, REPAIR/MAINT OF PATH, FENCING, BOUNDARY WALL, DRAINAGE AND SEWAGE

Amount

Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)complete all as specified and as directed.

Taking down Chowkhats or frames exc 1.5 sqm and not 4.00 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Shutters of any description n exc 1 sq. m each complete all as specified and as directed.

Taking down Shutters of any description exc 1.00 sqm and not 2.00 sq. m complete all as specified and as directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and scantaling all as directed.

Demoliation of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debries/rubbish complete all as specified and directed.

Demoliation of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

Demoliation Brickwork masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed

S & F 2nd class hard wood plain solid, straight chowkats and frames , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a), complete all as specified and as directed.

S&F second class hardwood 30mm thick Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) supplied and fitted to chowkats complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening as specified in SSR Part I, Section 8 complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint (1st quality) over a priming coat of pink primer complete all as specified and directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed

S&F 200mm long aluminium anodized, barrel tower bolts of extruded section and fixed, complete all as specified.

S&F 125mm long aluminium anodized, barrel tower bolts of extruded section and fixed, complete all as specified.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedr complete all as specified and as directed.

S&F 150 mm aluminum handle cast type anodized, complete all as specified and directed.

S&F 100 mm aluminum handle cast type anodized, complete all as specified and directed.

S&F 100mm butt hinges, medium weight cold rolled, MS steel complete, all as specified and as directed.

S&F butt hinges 100mm size extruded aluminium alloy with galvanised MS hinge pin, anodized and fixed type B-11, complete all as specified and as directed

S&F 75mm butt hinges, medium weight cold rolled, MS steel complete, all as specified and as directed.

S&F in repair, Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in windows with and including suitable size of 2nd class hard wood beading complete all as specified and as directed.

S&F Prepainted galvalume aluminium zink coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Prepainted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L false ceiling with 12 mm thick, 600mm x900mm plaster of Paris sheets fixed with machine screws on and including GI channel 18 gauge thick grid work, main joists placed at 750 mm centre to centre , cross joists placed at 450mm centre to centre, hanging with 6mm dia GI wire suspenders from roof, ‘J’ hooks bolts and nuts etc and treating the POP sheets with thin layer of POP with Gypsum anhydrous binder and prepare the surface till smooth surface is achieved; and applying two coats of distemper oil emulsion paint over a coat of primer complete as per manufacturer’s instructions and as directed .

M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed

M&L for rendering 15mm thick plastering in cement mortar (1:6) on on fair faces of brick work and finished the plastered surface fair and even without using extra cement.complete all as specified and as directed.

S&F mild steel works, Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F in repair, Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed

S&F Colour coated Anodised aluminium frame for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed Note:- Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Colour coated anodised aluminium doors shutters including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:-(i) Labour charges for fixing of glass/wire guage is inclusive in the unit rate quoted. Glass/Wire Guage/locks shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F Colour coated anodised aluminium windows/ventilators/partitions any type including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, along with standard locking arrangements, handles, tower bolts etc as required. complete all as specified and directed Note:- (i) Labour charges for fixing of glass/wire guage/aluminum grills is inclusive in the unit rate quoted. Glass/Wire Guage/aluminum grills shall be measured and paid seperately at supply only rates (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed

S&F 12mm thick frosted tuffen glass, ordinary quality , including acid pitching work of any colour and pattern as approved and fixing to wall/floor with spigot/clips of size as required, filling the gap with silicon filler, exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to Aluminum frame work complete all as specified and as directed.

Supply only 4.8mm thick plain sheet glass, ordinary quality fixed with Aluminum frame work exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only 4mm thick plain sheet glass, ordinary quality fixed with Aluminum frame work n. exc 0.5 sqm in each pane complete all as specified and as directed.

Supply only Mild steel 4 lever, Mortice lock, vertical type, size 100 mm complete all as specified and as directed.

Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum window/ventilator shutters complete all as specified and as directed.

M&L prepration of new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L preparation new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement moryar (1:6) complete all as specified and as directed.

M&L Coloured glazed ceramic tiles 350 x 250 x 7/300 x 450 x 7 mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with cement moryar (1:4) complete all as specified and as directed.

M &L for Non skid ceramic coloured tiles area of each tiles (Square / rectangular) exc 0.11 sqm but n. exc 0.18 sqm 7 to 8 mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick cement screed bed in cement mortar (1:6) complete, all as specified and as directed.

M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection/Pavings laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.including 20mm thick backing layer in cement mortar 1:6 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

M&L 19/20mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (conforming to IS 12701-1996) multi layer hoisted and fixed in position 500 ltrs capacity complete all as specified in SSR Part I, including necessary dismantling old unserviceablle tank complete all as specified and as directed

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (conforming to IS 12701-1996) multi layer hoisted and fixed in position 1000 ltrs capacity complete all as specified in SSR Part I, including necessary dismantling old unserviceablle tank complete all as specified and as directed

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (conforming to IS 12701-1996) multi layer hoisted and fixed in position 5000 ltrs capacity complete all as specified in SSR Part I, including necessary dismantling old unserviceablle tank complete all as specified and as directed

M&L for preparation of old treated plastered surfaces of wall and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for preparation of old treated plastered surfaces of ceiling and applying one coat of distemper oil emulsion complete all as specified and directed.

M &L for preparation of old treated plastered surfaces of wall and applying one coats of Acrylic Smooth exterior paint of required shade complete, all as specified and as directed.

M&L for complete removal of existing treatment of old treated plastered surfaces of wall including plasters cornices and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M&L for preparation of old treated plastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old treated plastered surfaces of ceiling and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old treated plastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L for preparation of old treated plastered surfaces of ceiling and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L Preparation of old treated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified & as directed.

M&L preparation of old treated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified & as directed.

M&L preparation of old treated surface of steel as in roof surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of roof paint over a coat of primer complete all as specified & as directed.

M&L for complete removal of existing treatment of old treated plastered surfaces of wall including plasters cornices and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of old treated plastered surfaces of wall including plasters cornices and applying two coats of plastic emulsion paint over a coat of suitable primer complete all as specified and directed.

S&F in repair,Table top wall hang basin with fixing accessories,size :425x345x175mm incl waste coupling Make-JAQUAR CAT No-CNS-WHT-903 or equivalent as approved by GE from list of approved makes.

S&F in repair, Bottle trap (with internal partition) 32mm size with 250mm & 190mm low wall connection pipes & wall flange all as specified and as directed Make-JAQUAR CAT No-ALD-769L250x190 or equivalent as approved by GE from list of approved makes.

S&F in repair, Sensotronic Mini Concealed Type Flushing Valve for Urinal complete set with installation box all as specified and as directed Make-JAQUAR CAT No-SNR-STL-51083 or equivalent as approved by GE from list of approved makes.

S&F in repair, Urinal with fixing acessories size 370x 315 x 620mm all as specified and as directed Make-JAQUAR CAT No-URS-WHT-132530 or equivalent as approved by GE from list of approved makes.

Demoliation Reinforced Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in Concrete, brick work, masonary and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh, any type,complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and as directed.

M&L precast reinforced cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in precast posts, fencing posts, struts etc. for fencing, average sectional area n exc 100 Sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops and fixed complete all as specified and directed.

M&L precast reinforced cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in precast posts, fencing posts, struts etc. for fencing, average sectional area exc 100 and n exc 250 sq. cm with or without chamfered angles and flat, splayed, rounded or mitred tops and fixed complete all as specified and directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in mass concrete complete all as specified and as directed.

M&L TMT Bars 10mm dia and Over, cut to length, bent to shape as required including Cranking, Bending, Hooking Ends and binding with Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M&L TMT Bars 5mm dia and over upto and including 10mm dia as in Stirrups, Spacers etc. cut to length, bent to shape required including cranking, bending, hooking ends and binding with Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed

Supply only chain link MS galvanized fencing of mesh size 100mm x 10mm, complete all as specified and as directed.

S & F mild steel screw bolts (machine made) with hexagonal head at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal nut, length of bolt exceeding 5cm and not exc 10cm long dia of neck 11 to 15mm complete all as specified and as directed.

M&L preparation new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide inc chrome primer complete all as specified and directed.

M&L preparation of new iron and steel surfaces of any description, n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and directed.

M&L brick work with sub class 'B' bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

M&L for rendering cement plaster 15mm thick in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Use and waste of Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for rough finished surfaces of concert flat complete all as specified and directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded agreegate) as in surface chanels and drains. complete all as specified and as directed by Engr-in-Charge

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Add to or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. Note:- Rate quoted is for adjustment of rate only for the actual size excuted at site for the item no 99.00 mentioned as above

M&L Plain cement concrete type B2, (1:2:4), (using 40mm graded stone aggregate), as in in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) as directed including necessary form work as required complete all as specified and directed.

M&L for Precast Reinforced cement concrete (1:2:4), type B1 (Using 20 mm graded stone aggregate)as in cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar (1:6) complete all as specified and as directed. Note:- Reinfocements will be measured and paid seperately under appropiate item

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 100mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in pavings laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc laying of cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing were directed at a level not exceeding 1.5m above the starting level complete all as specified and as directed.

M&L 150mm bore Concrete bed in cement concrete 1:3:6 Type C2 (40mm graded aggregate) to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and as directed.

M&L for 150mm bore Salt glazed stoneware drain pipes laid in trenches and jointed in cement mortar(1:1) complete all as specified and as directed.

M.G. ENTERPRISE

DEEP CONSTRUCTION

M/S NRI INFRASTRUCTURES

M/s L A Enterprise

PRITHWI BUILDERS

M/S SEWAK SINGH

MAC ENGINEERS

LAXMI & GANESH ENTERPRISE