Construction of pump house and extension to pipe line at Rohan PWSS In VP Songhar Tal-Mahad Dist-Raigad

Item no 1) Designing (aesthetically) andconstructing RCC ground service reservoirs/ RCC sumps in M-300 mix of required capacity including excavation in all types of strata foundation concrete container walls bottom slab top RCC roof slab / or dome 20mm etc complete.

Item no 2) Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc complete. 1) 75mm dia HDPE Pipe 8Kg

2) 63mm dia HDPE Pipe 8Kg

Item no 3) Excavation for foundation in earth soil of all types of sand, gravel, soft murum including removing the excavated materialsupto a distance of 50 Mt. Beyond the building area and lift up to 1.50meters, stacking and spreading as directed including dewateringUnless provided else where preparing the bed for foundation and necessary back filling ramming watering complete excluding shoring and strutting

Item no 4) Excavation for foundation / pipe trenches insoft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete

Item No.5)Lowering, 􀀃Laying􀀃and􀀃 Jointing􀀃 H.􀀃D.􀀃P.􀀃E./􀀃 M. D. P. E. pipes in proper position including allspecials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge 1) 75mm dia HDPE Pipe 8Kg

2) 63mm dia HDPE Pipe 8Kg

Item No.6)Refilling the trenches from excavated stuff with soft material in 15 cm layers with all leads & lifts including consolidation surcharging etc complete

Item No.7)Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. etc 1) 75mm dia HDPE Pipe 8Kg

2) 63mm dia HDPE Pipe 8Kg

Item no 8) Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.50mm Sluice Valve

75mm Sluice Valve b) Air valve

15mm dia b) Air valve

Item no 9) Providing and laying in situ cement concrete in proportion M-15 of trap metal for foundation and bedding including bailing out water manually, formwork, compacting etc. complete

Item no 10)Providing & fixing Name board fitting charges etc complete.

Item no 1) Providing erecting and giving test of 150mm dia srbmersible pump set confirming to IS 9283 with water proof winding pump shall be suitable for various delivery head and discharge with stainless steel shaft mtar suitable for working on 415V + 10% 3Ph 50Hz AC supply with cableguard thrust corbon fibre bearing to with stand entive hydraulic thrust The pump shall be suitable for direct coupling with suitable suction stainer pump sould have sritable discharge outlet as per manufacturers design antithrust stream lined nonreturn valve shall be provided with the pump 3m submersible copper conductor cable in single / double run and two pair of errectin clamps 65mm width 10mm thick shall be provided with each pump A) 3.00 Hp 12 stages

Item no 2) Providing and fixing clamps made cut of MS plate of suitable thickness with two nut bolts on each side to hold the total weight of pump and pipe assambly etc complete

Item no 3) Supplying and erecting ''B'' class GI bend in position with necessary material 80 mm dia etc complete

Item no 4) Supplying and erecting plain copper condrctor PVC insulated flexible cable as per IS 694 -1990 pf following grade upto 1100volts 3 cores 10 Sq mm etc complete.

Item no 5) Supplying errecting and giving test incluing A meter V meter phase indicating lamps dry run preventor single phase preventor over load relay and conductors assembly of std marks capacitor built or operate with separate of sheet metal etc complete.

Item no 6) Providing structural work in rolled sections like joists, channels, angles, etc. as per detailed designs & drawings including fixing in position without connecting plates braces, etc & one coat of anticorrosive paint & over it two coats of oil painting of approved quality & shade etc complete.

Item no 7) Trasportion charges of pump pannel board tripod and other tools and plants with MSEB Charges etc complete.

Item no 1) Providing ,laying and fixing CP.V.C. pipe of all mm dia. with fitting ssuchas bends, tees, reducers, clamps,etc.includingnecessaryexcavation,trenchfillingetc.complete.IncludingremovingexistingpipelineifnecessaryandconveyingandstackingthesameinPWDchowkyorasdirected etc. complete1) 50mm dia CP.V.C. pipe

2) 40mm dia C P.V.C. pipe

3) 25mm dia C P.V.C. pipe

4) 20mm dia CP.V.C. pipe

5) 15mm dia CP.V.C. pipe

Item No. 2 :- Cost of 15mm service connection for distribution network of any pipe. (Providing and making ISI Mark ferrule connection of 15mm dia. To water main including ferrule coupling cast iron bell mouth cover,built innonreturn valve and fixing including excavation and reinstatement complete.) MDPE/UPVC Without Road Crossing

MDPE/UPVC With Road Crossing

Item no 3) Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 50mm Valve

40mm Valve

Item no 4) Providing and laying in situ cement concrete in proportion M-15 of trap metal for foundation and bedding including bailing out water manually, formwork, compacting and curing. etc. complete.

Item no 1) Excavation for foundation in earth soil of all types of sand, gravel, soft murum including removing the excavated materialsupto a distance of 50 Mt. Beyond the building area and lift up to 1.50meters, stacking and spreading as directed including dewateringUnless provided else where preparing the bed for foundation and necessary back filling ramming watering complete excluding shoring and strutting.

Item no 2) Providing and laying in situ cement concrete in proportion M-15 of trap metal for foundation and bedding including bailing out water manually, formwork, compacting and curing.

Item no 3) Providing uncoursed rubble masonry of trap stones in cement mortar 1:6 in foundation and plinth of inner wall including bailing out water manually striking joints on unexposed faces and watering complete.

Item no 4) Providing second class burnt brick masonry with conventional/I.S types of bricks in cement mortar 1:6 in superstructure including striking joints racking out joints watering and scaffolding complete.

Item no 5) Providing and fixing 4mm thick plain A.C. sheets (of ISstd.) on top of the weather shed including scaffolding, fixing by meansofnutsandboltsorasdirectedetc.completeasperdetaileddrawing(Brackets of 70 x 45 mm to be paid separately).e.

Item no 6) Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters forR.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels,chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsandschedules.includingcutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Item no 7) Providing internal cement plaster 20mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete or brick surface in all positions including racking out joints scaffolding and curing complete.

Item no 8) Providing and fixing country cut teak wood single leaf paneled door shutters 35mm thick style & rail & 19mm thick country tw panels as per detailed drawaing including wrought iron hold fast stainless steel hinges & cromium plated fixtures & fastening & three cosat of oil painting etc complete.

Item no 9) Providing and applying two coats of water proof cement paint of approved manufacture and color to the plastered surface including scaffolding preparing the surface watering for two days complete.

Item no 10) Filling in plinth and floors with approved murum from excavated materials in 15cm to 20 cm layers including watering and compaction Complete.

Item no11) Providing soling using size trap rubble stone solling metal in layer 15cm each including filling voids with sand ramming warering etc complete.

labour insurance

royalty charges

contingency charge

Add 18% GST