Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-AOC C BLOCK 4G YUGA KALPATARU NO 18 PILLAYAR KOIL STREET PADIKUPPAM ROAD KOYAMBEDU CHENNAI 600 107 | CHENNAI | TAMIL NADU | 600107 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹24.8 L+₹5,307 (0.21%)Rejected-AOC 18 CORPORATION ROAD DEVAKOTTAI | SIVAGANGA | TAMIL NADU | 630001 | L2 | Rejected-AOC L2 bidder |
| Sl No | Description | Qty | Unit | V MEENAL AND CO L2 | SRI SELLIAMMAN AND CO L1 |
|---|---|---|---|---|---|
| 1.00 | Providing and laying of Hot Applied Thermoplastic Compound 2.5 mm Thick including Reflectrorising Glass breads@250 Gms per Sqm Area.Thickness of 2.5mm is Exclusive of Surface Appled Glass breads As per Irc:35. The Finished Surface to Be Level Uniform and Free From Streaks and Holes etc Completed As per Morth & Specification No 803 | 1,835 | Sqm | 890 ₹16,33,150 Lowest | 890 ₹16,33,150 Lowest |
| 2.00 | Providing and fixing reflective road studs of ‘category A’ Raised pavement markers made out of poly-carbonate / methyl methercrylate/ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm to the MORTH circular No RW / NH. 33023/10/ 97-DO. III dt 11.06.97. The height, width and length shall not be less than 15 mm, 90 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 +/- 5 degree. Each reflector shall have a CIL not less than values specified in Table 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. The marker shall support a load of 13635 Kg tested inaccordance with ASTM D4280 and confirming to IRC35 - 2015 guidelines and MoRT&H specification 804 etc., complete | 1,769 | Nos | 481 ₹8,50,889 | 478 ₹8,45,582 Lowest |
Tender Value
₹29.6 L
EMD Value
₹29,600
Closing Date
10 Sept 2025, 3:00 pmClosed
The Commissioner, Tambaram Corporation
1, Muthuranga Mudali St, West Tambaram, Tambaram, Chennai, Tamil Nadu 600045
Providing Thermoplastic and Reflective Studs in Pammal Area Newly Laid Road at Tambaram City Municipal Corporation Zone No.01
2025_DMA_600316_3
3014/2025/E1/Z1
Open Tender
Solid Waste Management
Item Rate
Pammal Zone No.01
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹29,600
10 Nov 2025
4 Sept 2025
10 Sept 2025
4 Sept 2025
10 Sept 2025
4 Sept 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_717626.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .