Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.5 LAccepted-AOC | L1 | Accepted-AOC AWARD | |
| 2 | L2₹26.9 L+₹1.5 L (5.71%)Rejected-Finance 32 GRAND SQUARE DANAPUR CANTT PATNA PIN 801503 | PATNA | PATNA | BIHAR | 801503 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹27.7 L+₹2.3 L (8.89%)Rejected-Finance B 150 GROUND FLOOR BACK SIDE PANDAV NAGAR DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹24.5 L
EMD Value
₹49,000
Closing Date
30 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GARRISON ENGINEER DANAPUR CANTT PIN 801503
PROVN OF GUEST ROOM WITH ATTACHED TOILET FOR SIL DIL PATIENTS AT MH DANAPUR CANTT
2023_MES_573028_1
GE/DNR/T-67 OF 2022-23 /8647/E8
Open Tender
Civil Works
Item Rate
180 days
DANAPUR CANTT
AS PER NIT
8 documents required · 8 mandatory
₹500
GE DANAPUR
₹49,000
Yes
20 Mar 2023
4 Jan 2023
1 Feb 2023
4 Jan 2023
30 Jan 2023
18 Jan 2023
Amount
Boring holes 4m deep and 300 mm dia of pile in any type soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50 m complete all as specified and directed.
Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.
Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed.
M&L PCC 1:4:8 type-D2 (40mm graded stone aggregate) as in foundations, filling and mass concrete.sub base as in floors. complete all as specified and directed..
M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M&L for providing reinforced cement concrete M-25 Design Mix using 20mm graded aggregate as in beams, cantilevers, bressmummers, lintels over 1.5 m span complete all as directed
M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in Chajjas and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)
M&L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.
M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.
Use and waste of Form work to rough finished flat surfaces as in sides and soffits of beams, lintels, coping etc complete.
M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.
M & L for brick work with sub class `B' brick (Old size) straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified & directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for plain cement concrete, (1:3:6) Type C2 (using 40 mm graded stone aggregate) as in foundation, Plinth filling and mass concrete complete all as specified and directed.
M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.
M&L for hard core of broken brick gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface complete as specified and directed.
M&L for 75 mm thick Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate), as in sub base finished even & fair etc complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate),as in sub floor complete all as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.
Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
S & F for 1st class hard wood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints and fixed all as spd.
M&L for 2nd class HW Plain, framed, panelled shutters 30mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats abd frame is moulded on solid (for each face) all as spd.(Design of door shall be approved by GE)
M&L for 30mm thick 2nd class Class HW Glazed and skeleton shutters for door , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as spd and directed.
M&L for 30mm thick 2nd Class HW Glazed and skeleton shutters for window, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as spd and directed.
S&F for framed guard bars with mild steel Square bars with ends of bars shouldered and riveted and similar work confirming to Fe -290 (Gde E-165)
S & F for 4 mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.
S & F for 4 mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in square not exc. 0.5 Sqm in each pane complete all as specified and directed.
Cutting holes in brick walls built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of wooden/Aluminium door, window, ventilator and making good dismantled portion in cement mortar 1:3 exceeding 1/2 brick but not exceeding one brick all as spd.
S & F for Mild steel works as in hold fasts, door chowkats and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
S & F for 125 mm size Butt hinges extruded brass with mild steel hinge pin bright polish and fixed type B-11 complete all as specified and directed.
S & F for 100 mm size Butt hinges extruded brass with mild steel hinge pin bright polish and fixed type B-11 complete all as specified and directed.
S&F for extruded brass handles, fabricated type, anodized 150 mm size complete all as specified and directed.
S&F for extruded brass handles, fabricated type, anodized 125 mm size complete all as specified and directed.
S & F for 300 mm long (Length of bolt) brass sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.
S&F for 200MM long brass barrel tower bolt with cast or sheet barrel and rolled or cast bolt section acomplete all as specified and directed.
S & F for 125 mm long (Length of bolt) brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolt complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate),for insertioin of hold fast incl necessary formwork etc complete all as specified & directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.
M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.
S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply only water proofing compound (liquid),ISI marked complete all as specified & directed.
M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.
M&L 15mm thick Rendring in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified & directed .
M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer including 3 mm thick Birla/ JK wall putty complete all as specified and directed.
M&L for applying two coat of cement base paint on plastered wall surfaces over a coat of primer incl preparation of surfaces etc complete as all specified.
M&L for two coats of weather coat paint (Apex paint) over a coat of primer on new surfaces on wall, roof, facia etc including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge.
M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.
M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile exceeding 0.36 sqm but not exc. 0.42sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M & L for Glazed ceramic white tiles of size 350 mm X 250 mm X 7 mm thick or 450mm X 350mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the including 10 mm thick rendering in CM 1:4 surface of tile complete all as specified and directed.
M & L for joint free Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed (1:6) etc complete all as specified and directed.
S&F for powder coated aluminium window/ ventilator fixed type with frames section weighing 0.55 Kg/mincluding 5.0 mm thick tinted /frosted glass, standard rubber gasket, aluminium beadings, joining cleat for fixing, locking devices complete all as specified & directed. Make : Jindal/Hindalco or Equivalent
S&F for 15-16 mm dia CPVC pipe SDR 11 & plain CPVC SDR complete fittings fixed to walls and ceilings or laid in floors with solvent etc. complete all as directed.
All as per item No 55 above but 20 mm dia pipe.
All as per item No 55 above but 32 mm dia pipe.
S&F for 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed
S&F nipple suitable for HDPE water tank (min weight 15mm-38gms)
S&F nipple suitable for HDPE water tank (min weight 20mm-45gms)
S & F for 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.
S&F for Gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe complete all as specified and directed.
S&F for Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.
S&F for vitreous china WHB size 550 mmx400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including MS brackets with two coats of synthetic enamel painting over a coat of red oxide primer etccomplete all as specified and directed.
S&F for vitreous china squatting pan, Orissa pattern of size 580 mm x 440 mm white, with integral foot rest, 'P' or 'S' trap including connection to trap, and to flush pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed.
S&F for 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall , complete all as specified and directed.
M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S & F for 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F for 15 mm bore bib taps, cast copper alloy CP with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F for 15 mm bore cast copper alloy CP fancy type stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as spd.
S & F for 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.
S & F for 20 mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.
S & F for 600mmx450mmx6mm bevelled edge mirror mounted in wall with frame of approved size and colour on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
S&F CP grating doom 125 mm dia with waste hole of ISI marked complete all as specified.
S & F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F for 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc complete all as specified and directed.
S & F for 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
M&L for PVC(SWR) Tee of 110mm dia etc complete all as specified and directed
S&F for PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.
M&L for 75 mm thick PCC type C2, 1:3:6 (40 mm graded stone aggregate) as in plinth portection finishing even & smooth without using extra cement laid in bays with construction complete all as spd and as directed
Supply only 38mm wide glass dividing strips, 3mm thick complete.
M & L for 150 mm bore salt glazed stoneware (SGSW) drain pipes grade 'A' laid in trenches and jointed in cement sand mortar 1:1 with spun yarn complete all as specified and directed.
M&L for concrete bed to drain pipes of 150mm dia including packing under, and haunching against the sides of pipes after they are laid and tested;in PCC 1:3:6 type C2 using 40 mm graded stone aggregate concrete all as spd.
S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening with fixing lugs (hold fast) etc as per specified & drawing complete all as specified and directed.
S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II (2020 print) on serial page No. 181 complete all as specified and directed.
M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.
M&L for rendering 20mm thick in cement plaster 1:4 on concrete surfaces finished even and smooth without using extra cement but using integral water proofing compound @ 200 ml/ 50 kg bag at cement (WPC will be paid separately) Note:- Liquid WPC will be measured and paid separately.
Excavation over area n exc 1.5m deep and getting out in any type of soil complete all as specified.
Excavation over area but depth exc 1.5m and but n. exc 3.00 mtr depth and getting out in any type of soil complete all as specified.
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in sub base of floor finished even and fair Complete all as spesified and directed
M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L for Brick work with sub class ‘B’ bricks straight or curved on plan any radius in half brick thick walls, built in CM 1:4 .
M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 10 cm and not exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed.
M & L for providing pre-cast cement concrete landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 complete all as specified and directed.
Supply only integral water proofing compound complete all as specified.
M&L for cement concrete 1:2:4 type B1 as in coping (using 20mm graded aggregate) including necessary form work all as specified.
S & F of 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls with MS bracket complete all as specified and directed.
S&F PVC (SWR) vent cowl of 75 mm dia complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B0(Using 12.50 mm graded stone aggregate) in sub base of floorings for tiles finished even & fair complete all as specified & directed.
M&L for durastone heavy duty coloured vitrified tiles 300x300x9-10 mm thick exterior grade set and jointed with neat cement slurry and painted in coloured or white cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified.
S & F powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 81.25 x 38.10 x1.25 mm @ 0.781Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (c) Top and bottom rail of size 47.62 x 44.45 x 1.18 mm @ 0.667Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for particle board & Glass, jointing cleat including locking arrangement. etc
M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for 20 mm thick rendering in cement mortar 1:4 on fair faces on concrete surfaces and finishing the surface even and smooth without using extra cement but using water proofig compound @ 200 ml/ 50 kg bag of cement complete all as specified and directed.
M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs including MS boxes 1.6 mm thick and 3 mm thick plastic laminated sheet for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed.
All as per item no 104.00 above but one bell point complete all as specified and directed.
All as per item no 104.00 above one 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified and directed.
All as per item No 104.00 above one 5 Amps socket out let point on independent board controlled by one switch complete all as specified and directed.
All as per item No 104.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent boardcomplete all as specified and directed.
Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and as directed.
Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and as directed.
Supply and fixing switch piano flush button single pole one way 15 amps, 240 Volts complete all as specified and as directed.
Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and as directed.
Supply and fixing bell push single pole, 6 Amps, 240 Volts, flush type complete all as specified and directed.
Supply & fixing for electronic Fan regulator 450 watt step type complete all as specified and directed.
Supply and fixing ceiling rose surface bakelite 63.5mm dia three terminal, fixied complete all as specified and as directed.
Supply and fixing for batten / angular fittings complete all as specified and as directed.
Supply and fixing double door Vertical TPN DBs four way of powder coated DB's suitable for MCCB upto 125 Amps incomer and MCB's fitted with bus bar,Neutral link,Earth bar and din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed. Make : L&T, Cat No: DBVTL004DD/ Legrand/Siemens.
Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed . Make: L&T/LEGRAND/SCHNEIDER/HAVELLS/HPL
Supply and fixing MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed . Make: Schneider/ Legrand/ L&T / ABB.
Supply and fixing MCB SP 240 volts 5 to 40 Amps, 10 KA breaking capacity, 'C' type including connection complete all as specified and directed by Engr-In-Charge. Make : Legrand/Schneider/Siemens.
Supply and fixing MCCB 63 amps 16 KA, 4 pole including connection with suitable size aluminium / copper lugs complete all as specified and directed. Make: Legrand/Schneider/L&T.
S&F for LED tube light fitting batten type single tube 1x 18/20 watt 230 volt wall/ ceiling mounted luminaire industrial type made of sheet metal box type suitable for T- 8 tube complete with electric electronic driver and bipin holder including one no tube 18/20 watt fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Bajaj/Surya/ Havells / Crompton Greaves
Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havell's Cat No: HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CGLBHP-10-CDL.
Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 25 watt 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40 mm dia GI pipe bracket including complete all as specified and directed. Make: Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPCMP /CG/PHILIPS/BAJAJ
M & L for security wall light bracket made out of GI pipe light grade 25 mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer complete all as specified and as directed.
Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor etc and connecting up complete including complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint complete all as specified and as directed. Make- Bajaj/Crompton Greaves/Havell's.
Supply and fixing metal body air fan / ventilator with louver 300 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable upto ceiling rose complete all as specified and directed .
M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.
Supply & fixing in repair Sheet metal earth plug, socket, single pole and neutral with single pole MCB 32 Amps 240 volts fixed in repairs complete.
Supply and fixing of Earthing to panel with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of MES Schedule pt-I 2009, GI earth lead strip protected by GI pipe 20 mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete
Supply , laying & testing XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 16 Sqmm nominal cross section x 4 core.
M & L clean dry river sand in trenches/ducts for cushioning to cable, 8 cm in depth before laying the cable and 15 cm in depth after laying the cable complete all as specified. Note:- Punned thickness shall be measured and paid.
M & L for old size sub class ‘B’ bricks, laid in trenches as cable covers / protection complete all as specified and directed .
M/s KUMAR ENTERPRISES
PAPPU ROY CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .