Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
29 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Non-comprehensive maintenance contract for 199 Nos. rigs/machines for Two Years
8520
SPA-23IN/9/2
Works
Accessories Complex - Lucknow Divn - Plant Maintenance
₹0
₹20,000
29 Jul 2024
8 Jul 2024
8 Jul 2024
29 Jul 2024
E-Tender No. SPA-23IN/9/2, Dated 03.07.2024
Bills of Quantity/ Price Bid Format
Sl. No. Work Description SAC/HSN Code Amount Rs. (Annual Rate)
1 Non-comprehensive maintenance contract for 199 Nos. rigs/machines for Two Years.
Total including GST for one year Rs.
Total including GST for two year Rs.
Name of Vendor:
List of RIGs for generate Asset ID DONE
Sl.No. FACT CATEGORY OBJECT TYPE MCH CODE MCH NAME FUNCTION MCH LOC Work center MANUFACTURER NO DOCUMENTS CONTR MAKE CONTR MODEL SERIAL NO CRITICALITY WAR/ AMC OPERATIONAL STATUS ACCURACY MAINT REP NAME GROUP ID FIXED ASSET NO OBJ LEVEL SUP MCH CODE CONTRACT COMPANY
1 Inst. Rig NSE-Jaguar NSE-JAG-062 Capsule Block test rig 246.710.0500 √ CR 1A IN- House In Operation 5774 :Namrata Singh
2 Inst. Rig NSE-MIG-BIS NSE-MIG-B-008 Cone position indicator Transmitter,BN 4007-0000 √ CR 1A IN- House In Operation 5774 :Namrata Singh
3 Inst. Rig NSE-Jaguar NSE-JAG-079 Nozzle position indicator 224-710-0400 √ CR 1A IN- House In Operation 5774 :Namrata Singh
4 Inst. Rig NSE-MIG-BIS NSE-MIG-B-009 Dynamic test rig GA2M 1A/45, H 0741 √ CR 1A IN- House In Operation 5774 :Namrata Singh
5 Inst. Rig NSE-Jaguar NSE-JAG-080 Turbo gas temp indicator test bench √ CR 1A IN- House In Operation 5774 :Namrata Singh
6 Inst. Rig NSE-Kiran Denis control pannel 09415402298 √ CR 1A IN- House In Operation 5774 :Namrata Singh
7 Inst. Rig NSE-Jaguar NSE- JAG-081 Acceleration table CR 1A IN- House In Operation 5774 :Namrata Singh
8 Inst. Rig NSE-Jaguar NSE- JAG-082 DD Indicator 242-710-0100 √ CR 1A IN- House In Operation 5774 :Namrata Singh
9 Inst. Rig NSE-Jaguar NSE- JAG-083 Angle of attack indicator 244-710-0700 √ CR 1A IN- House In Operation 5774 :Namrata Singh
10 Inst. Rig NSE-LCA NSE LCA-030 Altitude test rig,1749000 electronic (induction) heater √ CR 1A IN- House In Operation 5774 :Namrata Singh
11 Inst. Rig NSE-MIG-BIS NSE-MIG-B-010 BK 53 test Rig 240001 √ CR 1A IN- House In Operation 5774 :Namrata Singh
12 Inst. Rig NSE-Jaguar NSE-JAG-084 Test rig 242.710.2000 √ CR 1A IN- House In Operation 5774 :Namrata Singh
13 Inst. Rig NSE-ALH Pressure Switch Test Rig 165000000 CR 1A IN- House In Operation 5774 :Namrata Singh
14 Inst. Rig NSE-Jaguar NSE-JAG-085 Altrasonic cleaner CR 1A IN- House In Operation 5774 :Namrata Singh
15 Inst. Rig NSE-Jaguar NSE- JAG-086 Ultra Voilet light system screen printing CR 1A IN- House In Operation 5774 :Namrata Singh
16 Inst. Rig NSE-Jaguar NSE- JAG-087 oven of screen printing CR 1A IN- House In Operation 5774 :Namrata Singh
17 Inst. Rig NSE-LCA NSE LCA-031 Digital cycle counter test set 0502302 CR 1A IN- House In Operation 5774 :Namrata Singh
Total rigs Clean Room 1 A 40 nos
Sl.No. OBJECT TYPE MCH CODE MCH NAME MCH LOC
1 NSE-LCA NSE LCA-003 Rig for Gauge Pressure Switch 001654000-224 CR 1A √
2 NSE-LCA NSE LCA-004 Rig for Absolute Pressure Switch 001715000-224 CR 1A √
3 NSE-LCA NSE LCA-004 Absolute Pressure Switch Test Rig 1755000 CR 1A √
4 NSE-LCA NSE LCA-005 Test Rig for Environmental control system CR 1A *****
5 NSE-LCA NSE LCA-003 Test Rig for Gauge Pressure Switch 165000000/165100000 CR 1A √
6 NSE-LCA NSE LCA-031 Digital cycle counter test set 0502302 CR 1A √
8 NSE-LCA NSE LCA-030 Altitude test rig,1749000 electronic (induction) heater CR1A √
9 NSE-ALH NSE-ALH-B-007 Capsule Micro-meter system(LD-27131101) CR1A (Capsule shop) √
10 NSE-ALH NSE-ALH-M-007 Capsule control panel-Sl.no.cap 113 CR1A (Capsule shop) √
11 NSE-ALH NSE-ALH-M-008 Capsule control panel-Sl.no.20/91 CR1A (Capsule shop)
12 NSE-ALH NSE-ALH-M-009 Capsule control panel Sl.no.12/1 CR1A (Capsule shop)
13 NSE-ALH NSE-ALH-B-002 Oil Bath with control Panel-Sl.no.CAP/103 CR 1A (Capsule)
14 NSE-ALH NSE-ALH-B-003 Oil Bath with control Panel-Sl.no.CAP/102 CR 1A (Capsule)
15 NSE-ALH NSE-ALH-B-004 Oil Bath with control Panel-Sl.no.CAP/101 CR 1A (Capsule)
16 NSE-ALH NSE-ALH-B-001 VIC Leak detector CR1A
17 NSE-MIG-B NSE-MIG-B-008 Cone position indicator Transmitter,BN 4007-0000 CR 1A √
18 NSE-MIG-B NSE-MIG-B-009 Dynamic test rig GA2M 1A/45, H 0741 CR 1A √
19 NSE-MIG-BIS NSE-MIG-B-010 BK 53 test Rig 240001 CR1A √
20 NSE-JAG NSE-JAG-062 Capsule Block test rig 246.710.0500 CR1A (Capsule shop) √
21 NSE-JAG NSE-JAG-080 Turbo gas temp indicator test bench CR 1A
22 NSE-JAG NSE- JAG-081 Accelerometer Dynamic Tester CR1A
23 NSE-JAG NSE- JAG-082 DD Indicator 242-710-0100 CR1A
24 NSE-JAG NSE- JAG-083 Angle of attack indicator 244-710-0700 CR1A √
25 NSE-JAGUAR NSE-JAG-052 Test Rig for DUAL HYD. PRESSURE TRANSMITTER CR 1A
26 NSE-JAG NSE-JAG-079 Nozzle position indicator 224-710-0400 CR 1A √
27 NSE-JAG NSE-JAG-084 Test rig 242.710.2000 CR1A
28 NSE-JAG Pressure Switch Test Rig 165000000 CR1A √
29 NSE-JAG NSE-JAG-085 Altrasonic cleaner CR1A
30 NSE-JAG NSE- JAG-086 Ultra Voilet light system screen printing screen printing √
31 NSE-JAG NSE- JAG-087 oven of screen printing screen printing √
32 Gyro site head CR 1A (FERRANTI) √
33 Denis control pannel 09415402298 CR1A √
34 LCA Exersise cycling rig LD- 27132102 New √
35 MIG Test Pannel for gyro transmitter New
36 MIG 1122 B Indicator test rig New
Kiran 102DPG-2 test Rig
Jaguar Angle of attack switch pannel
Chetak 163700000 mili volt meter Rig for JPTI
34 AC POWER SOURCE ACPS-0018 AC POWER SOURCE CR 1A (FERRANTI)
35 AC POWER SOURCE ACPS-0015 AC POWER SOURCE CR 1A
36 OIL BATH OILBATH-003 LAUDA OIL BATH CR 1A
37 OIL BATH OILBATH-001 LAUDA OIL BATH CR 1A
38 OIL BATH OILBATH-002 LAUDA OIL BATH CR 1A
39 OIL BATH OILBATH-004 LAUDA OIL BATH CR 1A
40 OIL BATH OILBATH-005 LAUDA OIL BATH CR 1A
LIST for contract
Sl.No. MCH CODE MCH NAME Work center Remark
1 NSE-JAG-062 Capsule Block test rig 246.710.0500
2 NSE-MIG-B-008 Cone position indicator Transmitter,BN 4007-0000
3 NSE-JAG-079 Nozzle position indicator 224-710-0400
4 NSE-MIG-B-009 Dynamic test rig GA2M 1A/45, H 0741
5 NSE-JAG-080 Turbo gas temp indicator test bench
6 Denis control pannel 09415402298
7 NSE- JAG-082 DD Indicator 242-710-0100
8 NSE- JAG-083 Angle of attack indicator 244-710-0700
9 NSE LCA-030 Altitude test rig,1749000 electronic (induction) heater
10 NSE-MIG-B-010 BK 53 test Rig 240001
11 NSE-JAG-084 Test rig 242.710.2000 Check
12 Pressure Switch Test Rig 165000000/165100000
13 NSE-JAG-085 Altrasonic cleaner
14 NSE- JAG-086 Ultra Voilet light system screen printing
15 NSE- JAG-087 oven of screen printing
16 NSE LCA-031 Digital cycle counter test set 0502302
17 NSE LCA-003 Rig for Gauge Pressure Switch 001654000-224 CR 1A
18 NSE LCA-004 Rig for Absolute Pressure Switch 001715000-224 CR 1A
19 NSE LCA-004 Absolute Pressure Switch Test Rig 1755000 CR 1A
20 NSE LCA-005 Test Rig for Environmental control system CR 1A check
21 NSE-ALH-B-007 Capsule Micro-meter system(LD-27131101) CR1A (Capsule shop)
22 NSE-ALH-M-007 Capsule control panel-Sl.no.cap 113 CR1A (Capsule)
23 Gyro site head CR 1A (FERRANTI)
24 LCA Exersise cycling rig LD- 27132102 New
25 Jaguar Angle of attack switch pannel New
26 MIG Test Pannel for gyro transmitter New
27 MIG 1122 B Indicator test rig New
28 Kiran 102 DPG-2 test Rig NEW
29 Chetak 163700000 mili volt meter Rig for JPTI NEW
30 NSE-ALH-B-001 VIC Leak detector CR1A
31 NSE- JAG-081 Accelerometer Dynamic Tester CR1A
32 NSE-JAG-052 Test Rig for DUAL HYD. PRESSURE TRANSMITTER CR 1A check
33 NSE-ALH-M-008 Capsule control panel-Sl.no.20/91 CR1A (Capsule ) check
34 NSE-ALH-M-009 Capsule control panel Sl.no.12/1 CR1A (Capsule ) check
7 NSE- JAG-081 Acceleration table
Sl.no. MCH CODE MCH NAME FUNCTION
1 NSE-JAG-055 Test Rig for RMI 01 Test Rig for RMI 01
2 NSE-JAG-089 Test Rig for RMI 02 Test Rig for RMI 02
3 NSE-JAG-063 Test Rig for PRESSURE SWITCH Test Rig for PRESSURE SWITCH for P/No. 244-710-0200
4 NSE-JAG-057 Test Rig for Amplifier for Pno- 706/81, 706/82, 706/83 Test Rig for Amplifier for P/No. 242-710-00
5 NSE-JAG-058 Test Rig for Sensor for PNo. 242-710-1600, Test Rig for Sensor for P/No. 707/362,,
6 NSE-JAG-070 Test Rig for Float Valve and Booster Pump Test Rig for Float Valve and Booster Pump
7 NSE-JAG-064 Test Rig for DIFF. PRESSURE SWITCH Test Rig for DIFF. PRESSURE SWITCH for P/No. 1135205 ,mano meter
8 NSE LCA-012 Test Rig for Lighting Box Test Rig for Lighting Box p/N226700000
9 NSE-ALH-B-005 Vaccum Chamber For control Valve/bypass valve 780504-1,7285493
10 NSE-JEG-065 Test Panel for control valve P/N 7285493 & 780504-1
11 NSE-ALH-B-033 Cycling Rig, REP-11 P/N 1650/1651
12 Test Panel for duct sensor 728-863-3 P/N 7288683
13 1936BA, LD-24131112 (1145BE)Test rig for1936-02
14 FCG Test rig 242.710.1600 FCG Test rig 242.710.1600
15 NSE-JAG-090 Test set up for Pressure switches no 1352-05, 1-1224-89, 1124-21 P/N 1122421 & 1122489
16 NSE-ALH-B-032 Denis cyclic pressure stabilizing test rig P/N 165000-000
17 NSE-MIG-B-018 Motor test bench 72C-7455 P/N MP100MSR2
18 NSE-MIG-B-016 Pitch position transmitter test rig 2/425/2
19 NSE-MIG-B-015 ARU test panel ARU-3VMSR3 P/N ARU3VMSR3
20 NSE-MIG-B-014 Test set up electro-mechanism P/N ARU3VMSR2
21 Position Transmitter 2/425/2
22 NSE-JAG-096 Test panel for dual hyd. Transmitter, 2/409 P/N 1113602
23 NSE-ALH-B-031 Test panel for Pressure Switches, 1650/1651 P/N 1650/1651
24 Test panel for Differential Pr Switch, 2/460
25 NSE-MIG-B-013 Test rig for BUK 21
26 NSE-MIG-B-012 USS test panel 40040000 P/N USS42M
27 NSE-JAG-095 Test For relay box 718112 & 7219441 relay box 718112 & 7219441
28 NSE-JAG-098 New Test rig for Amplifire P/N 242710-00 P/N 706181/706182/70683
29 NSE-JAG-099 Test rig for P/N 2427101600 Unit P/N 707362
30 NSE-JAG-100 Test Rig for 1113602 (New) Test Rig for 1113602 (New)
31 NSE-JAG-101 Test Rig for 1113602 (Old) Test Rig for 1113602 (Old)
32 NSE-JAG-102 CONTROL VALVE, 2/413 P/N YB05041&7285493
33 NSE-MIG-B-011 UGR-4UK, Y-559CX3, Sl.No. N1240001 P/N UGR-4UK
Clean room 2(B)
1 IAS muti switch test Rig 640.609041
2 magnetizer 105
3 Indicting Air speed switch. 244-710-0600
4 Accelerometer test rig centrifugal TCAM-0600
5 Altitude decoder and Readout rig SE-TS-AD-T2600
6 Altitude Decoder & Read out test rig BM0542 (A)
7 Altitude Decoder & Read out test rig BM0542 (B)
List of Test Rigs / Panels / Machines of Instrument Factory and ASERDC
Sl. No. Test Rig Name location/Shop Quantity Concernt of User
1 Alternator test rig (Jaguar) Part No. 203700000 ERM 1
2 Alternator test rig (Jaguar old) Part no. 12110 ERM 1
3 Starter gen test rig ERM 1
4 Motor mode test rig NAL-MSC-X111/1050 ERM 1
5 Motor mode test rig ERM 1
6 Alternator test rig (Mirage 2000) ERM 1
7 PTO (1000/1500M) test rig ERM 1
8 Static test rig ( Jaguar regulator) ERM 1
9 AC Generator test rig GCA10A1A, Make ASE Italy ERM 1
10 Hot Oven Sr.No. 22/26 ERM 1
11 Hot Oven Sr.No. 355/04 ERM 1
12 Hot Oven Sr.No. 169/07 ERM 1
13 Clutching /Declutching Test panel for Jaguar Alternator ERM 1
14 Coil winding m/c ERM 1
15 Balancing machine OLD Sr.no. 96-97 A016 ERM 1
16 Balancing machine Sr.no. ARD 0725 ERM 1
17 Balancing machine Sr.no. 2018 A22 ERM 1
18 SAL 11LA5 Unit -Sal actuator Trim Shop 1
19 VL27A1 Unit actuator Trim Shop 1
20 VL13C2 Unit actuator Trim Shop 1
21 VL13B4 Unit PML motor actuator Trim Shop 1
22 VL13A4 Unit actuator Trim Shop 1
23 Electronic Test Rig for LCA fuel Probe-1800100 A LCH Shop 1
24 Electronic Test Rig for LCA fuel Probe-1800100 B LCH Shop 1
25 Electronic Test Rig for ALH fuel Probe,GLH2001 000 00 LCH Shop 1
26 Level switch Test rig, 003766000 LCH Shop 1
27 FCG test rig, GLH 200100000/1 LCH Shop 1
28 FCG test probes, 239800000, 239900000 LCH Shop 1
29 Electronic Test Rig 005150000(LCA) LCH Shop 1
30 DRY test rig Part no. 000100000 LCH Shop 1
31 Electronic Test Rig FCG Probe (LCA) part. No 101003750000 LCH Shop 1
32 Electronic Test Rig (HJT-36) FCG probes 000200000 LCH Shop 1
33 Hyd. Rubber Cutting M/c. , (Stamp & Press) E-7926 Rubber Plastic 1
34 Rubber Mixture Rubber Plastic 1
35 Hot Oven RP-1 Therelek Rubber Plastic 1
36 Hot Oven RP-2 Therelek Rubber Plastic 1
37 Hot Oven Rubber Plastic 1
38 Hot Oven Rubber Plastic 1
39 Programable Hot oven PID Rubber Plastic 1
40 Programable Hot oven PID Rubber Plastic 1
41 Vacuum moulding Plant.Horizontal/Vertical Rubber Plastic 2
42 HOT oven make Denis Rubber Plastic 1
43 Polymide Impegration plant Rubber Plastic 2
44 Hammer 500 Kg. Messy Foundry Fordge 1
45 Aluminium Furnace Foundry Fordge 1
46 Hydraulic Trimming machine 12 Ton Foundry Fordge 1
47 Hydraulic Press machine 1000 Ton Foundry Fordge 1
48 Steel Furnace Foundry Fordge 1
49 Bend Saw Aluminium cutting m/c Foundry Fordge 1
50 DC SYSTEM test rig, GLH1002.000.00-1 A&T I Shop 2 A 1
51 AC SYSTEM test rig, GLH1001.000.00 A&T I Shop 2 A 1
52 ACPU test rig, 9800000, 01/2001 A&T I Shop 2 A 1
53 FTU test rig, 1600000/2280 A&T I Shop 2 A 1
54 TEST RIG FOR TRU JAG, (2/421/9) old A&T I Shop 2 A 1
55 Test Rig for TRU LCA 2/453/1 A&T I Shop 2 A 1
56 ACPU dynamic test rig A&T I Shop 2 A 1
57 Dc master box test rig A&T I Shop 2 A 1
58 Ac master box test rig A&T I Shop 2 A 1
59 Electrical control panel for AC master box Pno. 009150000 A&T I Shop 2 A 1
60 Static test rig for PCB screening Pno. 009820000 A&T I Shop 2 A 1
61 Test rig DC system LCA Sl. No. 10/3002/101 A&T I Shop 2 A 1
62 Electrical control panel for DC master box Pno.000800000 A&T I Shop 2 A 1
63 Test Rig for Battery Terminal Box/Junction 009910000 A&T I Shop 2 A 1
64 Test rig for electronic unit 4883-1/2,246-710-0700 A&T I Shop 2 B 1
65 Impulse Magnetizer IMP -1500 Sl.N0. 207/08 A&T I Shop 2 B 1
66 GPPU test rig 008600000-224 A&T I Shop 2 B 1
67 Test bench DE test set 1005-1 for 4867,48811 OLD A&T I Shop 2 B 1
68 ATC amplifier test Rig 729879-2 A&T I Shop 2 B 1
69 Test panel for control switches P. No 2467101000 A&T I Shop 2 B 1
70 GCPU test rig 10/92 A&T I Shop 2 B 1
71 Universal test rig for Inverter 221700000 A&T I Shop 2 B 1
72 Test rig for amplifires p.no 24271000 A A&T I Shop 2 B 1
73 Test rig for amplifires p.no 24271000 B A&T I Shop 2 B 1
74 Universal test rig Inverter Sl.no 102/11 A&T I Shop 2 B 1
75 Test rig FCG content detector old P.No. 2427101600 A&T I Shop 2 B 1
76 Test rig for Relay box P.No.2/414 A&T I Shop 2 B 1
77 GCPU test rig type -T-REG-01 -00-000 A&T I Shop 2 B 1
78 Landing Gear control switch Drg no. 246-710-1001 A&T I Shop 2 B 1
79 Test rig electronic unit(block) P.NO.246-710-0700 A&T I Shop 2 B 1
80 U-12 Sr.NO. 2/427 A&T I Shop 2 B 1
81 Test Rig for RMI 01 A&T I Shop 2 C 1
82 Test Rig for RMI 02 A&T I Shop 2 C 1
83 Test Rig for PRESSURE SWITCH A&T I Shop 2 C 1
84 Test Rig for Amplifier for Pno- 706/81, 706/82, 706/83 A&T I Shop 2 B 1
85 Test Rig for Sensor for PNo. 242-710-1600 A&T I Shop 2 B 1
86 Test Rig for Float Valve and Booster Pump A&T I Shop 2 C 1
87 Test Rig for DIFF. PRESSURE SWITCH A&T I Shop 2 C 1
88 Test Rig for Lighting Box A&T I Shop 2 C 1
89 Test Panel for control valve A&T I Shop 2 C 1
90 Cycling Rig, REP-11 A&T I Shop 2 C 1
91 Test Panel for duct sensor 728-863-3 A&T I Shop 2 C 1
92 1936BA, LD-24131112 A&T I Shop 2 C 1
93 FCG Test rig 242.710.1600 A&T I Shop 2 C 1
94 Pressure switches no 1352-05, 1-1224-89, 1124-21 A&T I Shop 2 C 1
95 Motor test bench 72C-7455 A&T I Shop 2 C 1
96 Pitch position transmitter test rig 2/425/2 A&T I Shop 2 C 1
97 ARU test panel ARU-3VMSR3 A&T I Shop 2 C 1
98 Test set up electro-mechanism A&T I Shop 2 C 1
99 Test panel for dual hyd. Transmitter, 2/409 A&T I Shop 2 C 1
100 Test panel for Pressure Switches, 1650/1651 A&T I Shop 2 C 1
101 Test panel for Differential Pr Switch, 2/460 A&T I Shop 2 C 1
102 Test rig for BUK 21 A&T I Shop 2 C 1
103 USS test panel 40040000 A&T I Shop 2 C 1
104 Test For relay box 718112 & 7219441 A&T I Shop 2 B 1
105 New Test rig for Amplifire P/N 242710-00 A&T I Shop 2 B 1
106 Test rig for P/N 2427101600 A&T I Shop 2 C 1
107 Test Rig for 1113602 (New) A&T I Shop 2 C 1
108 Test Rig for 1113602 (Old) A&T I Shop 2 C 1
109 CONTROL VALVE, 2/413 A&T I Shop 2 C 1
110 UGR-4UK, Y-559CX3, Sl.No. N1240001 A&T I Shop 2 C 1
111 Panel For Checking Of Electro Mechanism, 8B2.399.584 SU-30 Inst. 1
112 Panel For Regulation Of Mechanism, 8B2.399.528 SU-30 Inst. 1
113 Test case 6185 ES000-009 Sl.no. 001 SU30 Acctuator 1
114 Panel For Testing Of Electric Motor, 8B2.399.685 SU-30 Inst. 1
115 Test case 6185 ES000-009 Sl.no. 002 SU30 Acctuator 1
116 Panel, 72S.7317 SU-30 Inst. 1
117 Panel, 72S.8518 SU-30 Inst. 1
119 Installation For Checking Pickup Dsmk, T6363-3831 SU-30 Inst. 1
120 Installation For Checking kpu-104, T6363-5426 SU-30 Inst. 1
121 Rig For Checking Of Pickups Dsmk16, T6364-1507 SU-30 Inst. 1
122 Inspection DeviceKpu-1T6363-5472I(OLD P/No. T6363-4926) SU-30 Inst. 1
123 Inspection Device Kpu-2, (T6363-4927 I) SU-30 Inst. 1
124 Pcb Tester, T6363-5617 SU-30 Inst. 1
125 Panel For Output Circuit With Open Collectors & Looms, (T6363-5113) SU-30 Inst. 1
126 Checking Device For Kpu-Kpp-A, T6363-5116 SU-30 Inst. 1
127 Code Generator Jk1 With Looms, T6363-5427 SU-30 Inst. 1
128 Installation For Inspection Kpu Str7-5i, T6363-5477 I SU-30 Inst. 1
129 Panel For System Checking Str7-5i, T6363-5478 I SU-30 Inst. 1
130 Panel For Checking Of Voltage Stabilizer (SN - 15) СН-15, (T6363-5240) SU-30 Inst. 1
131 T6363-5499 Instalation for checking PCB 6L5.106.097 SU-30 Inst. 1
132 72S.6527/APD99SR5 time clock device SU-30 Inst. 1
133 Panel For Checking The Stabilizer Sn-10, T6363-4578 SU-30 Inst. 1
134 Installation For Checking The Stabilizer Sn-24, T6363-5489 SU-30 Inst. 1
135 T6363-5496/(BR3A-7) STR 7 -5I Installation For Checking PCB 6L5.104.153 SU-30 Inst. 1
139 Capsule Block test rig 246.710.0500 Clean room 1 A 1
140 Cone position indicator Transmitter,BN 4007-0000 Clean room 1 A 1
141 Nozzle position indicator 224-710-0400 Clean room 1 A 1
142 Dynamic test rig GA2M 1A/45, H 0741 Clean room 1 A 1
143 Turbo gas temp indicator test bench Clean room 1 A 1
144 DD Indicator 242-710-0100 Clean room 1 A 1
145 Angle of attack indicator 244-710-0700 Clean room 1 A 1
146 Altitude test rig,1749000 electronic (induction) heater Clean room 1 A 1
147 BK 53 test Rig 240001 Clean room 1 A 1
148 Test rig 242.710.2000 Clean room 1 A 1
149 Pressure Switch Test Rig 165000000/165100000 Clean room 1 A 1
150 Ultra sonic cleaner Clean room 1 A 1
151 Ultra Voilet light system screen printing Clean room 1 A 1
152 oven of screen printing Clean room 1 A 1
153 Digital cycle counter test set 0502302 Clean room 1 A 1
154 Rig for Gauge Pressure Switch 001654000-224 Clean room 1 A 1
155 Rig for Absolute Pressure Switch 001715000-224 Clean room 1 A 1
156 Absolute Pressure Switch Test Rig 1755000 Clean room 1 A 1
157 Test Rig for Environmental control system Clean room 1 A 1
158 Capsule Micro-meter system(LD-27131101) Clean room 1 A 1
159 Capsule control panel-Sl.no.cap 113 Clean room 1 A 1
160 Gyro site head Clean room 1 A 1
161 Angle of attack switch pannel Clean room 1 A 1
162 Test Pannel for gyro transmitter Clean room 1 A 1
163 1122 B Indicator test rig Clean room 1 A 1
164 102 DPG-2 test Rig Clean room 1 A 1
165 163700000 mili volt meter Rig for JPTI Clean room 1 A 1
166 Accelerometer Dynamic Tester Clean room 1 A 1
167 Test Rig for DUAL HYD. PRESSURE TRANSMITTER Clean room 1 A 1
168 Capsule control panel-Sl.no.20/91 Clean room 1 A 1
169 IAS multi switch test Rig 640.609041 Clean room 1 B 1
170 magnetizer 105 Clean room 1 B 1
171 Indicting Air speed switch. 244-710-0600 Clean room 1 B 1
172 Test Rig for CONTROL BOX for P/No. 729-518-5 Clean room 1 C 1
173 Compass Controller test Rig P/No 2417101100 Clean room 1 C 1
174 Test rig for compass controller New P/No 2417100100 Clean room 1 C 1
175 Integrated test Rig for TURN & SLIP INDICATOR SF1305KTSFA1 (incl Rate table and Insulation Tester,Multimeter, AC Power Supply) Clean room 1 C 1
176 Test Rig for TACHOMETER INDICATOR P/No. 244-710-0600 Clean room 1 C 1
177 Test Set up for GAMU-C2 J Base Test Set 2417101000 Clean room 1 C 1
178 Test Set up for GAMU-Flux Valve Simulator 2417102100 Clean room 1 C 1
179 Test Set up for GAMU-Gyro Analyser Test Fixture Test Rig 2417100500 Clean room 1 C 1
180 Test Set up for GAMU-Phase Shifter Test Fixture Test Rig 2417100600 Clean room 1 C 1
181 Test Set up for GAMU-Rotor Balancing machine Make Schenk Avery Clean room 1 C 1
182 Test Set up for GAMU-Slaving Amplifier Test Set 9002857 Clean room 1 C 1
183 Test Set up for GAMU-System Test Set 241-710-0300 Clean room 1 C 1
184 Test Set up for GAMU-Test Rig 11.8/90 V Slow Motion Synchro Drive 2417101400 Clean room 1 C 1
185 Test Set up for GAMU-Test rig Angle Position Indicator 2417100900 Clean room 1 C 1
186 Test Set up for GAMU-SCOSBY TABLE incorporating Switch Modification TP7122 and Power Supply Control Box Clean room 1 C 1
187 Gyro Magnetic compass Test bench, 46165081003 Clean room 1 C 1
188 Test bench for Electronic module, 46165069-003 Clean room 1 C 1
189 Sagem final test bench, 260997960 Clean room 1 C 1
190 4286 V8 Test rig 411/1 Clean room 1 C 1
191 Gyro motor test panel 1A/420 Clean room 1 C 1
192 Control box test rig 166300000 Clean room 1 C 1
193 Test Rig. of control box P/T No. 1664.00.000 Clean room 1 C 1
194 Gyro wheel test bench 424-65099-003 Clean room 1 C 1
195 RPM indicator part no. Ld2213 -2110 Clean room 1 C 1
196 Techo meter/ Transmitter EQPT -2131-000-ADL (I) Clean room 1 C 1
Total No of Test Rigs / Panels / Machines 199
E-Tender No. SPA-23IN/9/2, Dated 03.07.2024
S.N. TERMS AND CONDITIONS Remarks (Complied/Not Complied)
1 The contractor shall fully acquaint himself with the scope and nature of working conditions, etc before submission of tender/offer. No claim will be considered later on the grounds of ignorance or otherwise of the conditions under which the work will have to be executed.
2 Acceptance of Tender: The Contractor shall be bound to accept the award of contract at the rates quoted/ agreed by him. Failing which the EMD of the contractor shall be forfeited and party shall be debarred/ blacklisted as per HAL-ADL rules.
3 Contract Period:The Contract shall be valid for Two Years from the date of acceptance of work order.
4 Compensation for Delay: 1). If the work is not completed with in stipulated date of completion, the compensation for delay shall be deductible from any sum payable to you under work order or any other contract with HAL. The compensation delay shall be @ 1% of total payable amount per week limited to the maximum 10% of total payable amount. 2). In event of contract personnel being on leave/absent, the contractor shall ensure suitable alternative to make-up for such absence. To meet such eventualities, the contractor shall make provision for leave reserve. Absentees shall attract penalty of ₹ 400/- per day per technician and ₹ 600/- per day for supervisor. 3). Penalty will not be levied for breakdown pending for want of spares, fabrication/ purchase to be arranged by HAL.
5 Price:- The quoted price shall be on the yearly basis. The quoted prices should be inclusive of GST.
6 Payment Terms:- Payment shall be made on quarterly basis through e-payment system. Hence, bank details are to be provided by the successful contractor.
7 Risk Clause:- The contractor shall be responsible for completion of service contract as required by HAL-ADL as per contract terms & conditions. In case, the contractor fails to execute the contract either in terms of quality or quantity or if any work remains unattended within the stipulated time, HAL-ADL is empowered to take decision and get the same attended by any other Agency at the risk and cost of the Contractor. Any extra expenditure incurred in this connection will be recovered from the bills of the Contractor.
8 Contract Agreement:- Successful contractor shall execute an agreement on a general stamp paper of the value of Rs. 200.00 on the enclosed Proforma. All partners of the contractor shall sign the agreement or one partner should have proper authority letter from all other partners. The authority letter has to be forwarded with the agreement. The agreement is to be executed within 21 days from the date of acceptance of work order. Any delay in execution of agreement shall attract a penal recovery @ Rs.2500.00 per week subject to maximum of Rs. 10,000.00
9 PF & ESI :- The contractor is required to comply with the provision of PF & ESI act. The contractor shall be required to indemnify HAL for any liabilities arising on account of ESI & PF act as per Performa provided by HAL and same to be dully filled and signed on Non-Judicial stamp paper of Rs.100.00 in front of notary and should be enclosed with the acceptance of order.
10 Security Deposit:-
10.1 The successful tenderer will be required to furnish security deposit for the fulfillment of contract. The security deposit shall be 5% of the original contract value : -
i). Security deposit shall be 5% of contract value and will be deposited in the form of Bank Demand Draft / Bank Guarantee in favor of HAL, Accessories Division, Lucknow within 15 days of issuance of service order. The security deposit money shall be refunded after satisfactory completion of work.
ii). The EMD deposited will be adjusted toward Security Deposit and balance amount shall be deposited through demand draft/bank guarantee in favor of HAL, Accessories division, Lucknow payable at Lucknow.
iii). Any delay in submission of security deposit shall attract a penal recovery for delay period @ 2% of security deposit per week or part thereof with a maximum penalty of 25% of security deposit.
11 Staff Entry:- Entry of staff engaged for the work shall be controlled as per HAL security rules & regulations. Material:- All material whether to be consumed in the work or to be taken back later shall be entered through proper challans duly checked & entered by HAL security gate.
12 Parallel Contract: HAL reserve the rights for entering into parallel contracts with other firms/ Contractors for the same requirement if it is found necessary.
13 Validity of offer: Offer should be valid for a period of at least 120 days from the date of opening of tender.
14 General Conditions: (a) Required tools and tackles are to be arranged by tenderer. (b) Unsolicited letter/canvassing / post tender correction Canvassing by tenderer in any form including unsolicited render tenders liable for rejection. (c) The HAL reserves all the right to accept/ reject any or all the tenders without assigning any reason whatsoever.
Name of Vendor:
E-Tender No. SPA-23IN/9/2, Dated 03.07.2024
Technical Compliance Matrix/Scope of work
Sl No. Description of work Complied/ Not complied status of offered item (To be filled by supplier)
1.1 Non-Comprehensive Maintenance Contract for 199 Nos. machines including simple to complex Rigs, panels, control panels from various manufacturers as per Annexure-1. Machines covered in the contract are indicative and may increase/decrease during contract period.
1.2 Contractor shall depute team of four skilled technicians/ Electricians and one supervisor on all working days for attending the regular service requirements and rectify the breakdowns. If required Technicians/ Electricians may be called on Sundays & Holidays for preventive/ maintenance work as per instruction of engineer-in-charge.
1.3 Scope of work covers breakdown maintenance, preventive maintenance of control Panels of various machines, rigs and motors of Instrument factory and ASERDC area. Due care has been taken to mention all maintenance activities to be carried out by the party & brought out in the Scope of Work. However, any work pertaining to machine’s health not mentioned explicitly will also be done as per direction of EIC.
1.4 This contract shall not cover overhauling & major repair (AC/ DC drive, Semi, Automation, Software related drive/ panels, Torque control/ monitoring device) of Electrical Panels, control Panels of any machine / equipment in Instrument factory and ASERDC area. Contactor’s team will assist HAL personal in rectification of major breakdowns.
1.5 HAL will not accept any temporary work/ shortcuts like loose fittings, improper cabling, termination, hanging wires, hoses, temporary electrical connections etc. this will also be taken into account while evaluating performance of the contract.
1.6 Contractor should not bypass rigs, panels, operator safety interlocks. The violation of the same will be treated seriously.
1.7 HAL will arrange all maintenance spare parts as needed. However, contractor should monitor & continuous feedback about the consumption & replenishment of the same to be informed timely.
1.8 The contactor will prepare a site / complain register to record the day to day breakdown/ preventive maintenance activity status.
1.9 Contractor will have to arrange all tools and tackles like spanners, screwdrivers & testers, multi-meters (calibrated) etc. for the maintenance work before deputation.
1.10 Generally contractor should not change/ transfer their maintenance personnel and supervisor from the site without EIC prior permission.
1.11 Any breakdown/ damage to machine/ accident on account of wrong maintenance practices will be investigated jointly by HAL and contractor. The loss on account of the same will be recovered from the contractor.
1.12 Breakdown calls must be attended within 02 hours after receiving the breakdown information from maintenance/ user department.
1.13 The damaged parts replaced by the new ones are to be returned back and to be stored in defined location in Maintenance Department.
1.14 Normal working hours shall be 0800 hrs. to 1600 hrs. (General Shift) for attending the regular service requirements and rectify the breakdowns, breakdown work may continue beyond normal working hours. However, maintenance services will be not be limited to working days only. If required contractor has to depute their skilled electrician/ technicians after normal working hours/ holidays/ Sundays in case of emergency as decided by engineer-in-charge.
2.0 Description of Preventive & Breakdown Maintenance:-
2.1 Rectification of any defect found during the checking and ensuring serviceability of machines/ electrical panels etc.
2.2 Ensuring proper wiring up to the Control elements such as Contactors, SSRs or Control Relays, Transformers, electrical panels, fans and switchgears etc. in the machines/panels.
2.3 To maintain 5 S in all maintenance activities.
2.4 Cleaning of Control Panel and other electrical items on the Rigs/panel like motors, fans; with the use of Vacuum Cleaner/ Blower, Rust remover, Electrical contact cleaner, etc.
2.5 Checking all electrical contacts for loose connection, and tightening if required.
2.6 Visual checking of wire insulation inside and outside of the control panel for damage wherever possible and replacing the same if required.
2.7 Measuring Power cable insulation resistance wherever possible as directed by In-charge.
2.8 Measuring Motor Winding Resistance and Insulation Resistance wherever possible as directed by EIC.
2.9 Reporting to the Engineer-in-charge or Shop In-charge without delay about the defects noticed during machine repair.
2.10 Quarterly Preventive Maintenance of all electrical hardware installed in the machines, electrical panels etc. by checking cleaning, soldering to ensure about proper contacts, wiring and connection. On need basis replacement of electrical items/belts/ nut and screws to be provided by HAL. Wiring/cabling & minor mechanical works related to machine maintenance are included.
2.11 The contract contemplates servicing, repair only. It does not cover any major repair & overhauling.
2.12 Any other activities not specified but necessary to clear the breakdown to be done by the contactor.
2.13 The contractor will intimate in writing the name, designation, qualification & experience details of contract Execution Team.
3.0 Contract Execution Team Members:- Contractor shall submit details of Engineers & Technicians who will be part of contract execution team. Contractor shall ensure four skilled technician/electrician and one supervisor team to run the contract smoothly.
3.1 Contractor will submit an undertaking about their competence at time of signing the contract. The contractor shall ensure that his authorized representative(s) is / are available as per work requirement.
3.2 The min qualification and experience of the deputed person will be as follows Supervisor – BE/B Tech with min. 03 years of experience / Diploma with Min. 05 years of experience on similar electronics, electrical panel & machines. Technician – Diploma with Min 02 years of experience on similar machines, ITI with 03 years of experience on similar machines.
3.3 The contractor will ensure that all necessary precautions are taken by their persons during the work. Any accident caused due to incompetency of the person will be the responsibility of the contractor. The amount will be compensated from the bills in case of any such event occurs.
4.0 FRISKING / CHECKING PROCEDURES
4.1 All contract staff shall be liable to be frisked/ checked by the security personnel at Client premises or on duty at any time during performance of their duties. If anything untoward is found, it must be reported to Officer in-charge.
4.2 The contractor will be responsible for the conduct of his staff inside HAL premises.
E-Tender No. SPA-23IN/9/2, Dated 03.07.2024
Eligibility Criterion & Instructions to Bidders
i) Bidder must strictly comply with these instructions while submitting the offer. ii) Bidder to categorically confirm that offer submitted is as per instructions given herein.
S.N. Clause Bidder Confirmation (To be filled by Bidder)
1 Please submit your Quotation for following items in two parts (Price & Technical Bid) in the prescribed format uploaded on e-portal.
This bid should be accompanied by Earnest Money Deposit of Rs.20,000.00 payable through Banker’s Cheque/Demand Draft from any Scheduled Bank/ Nationalized Bank in favour of Hindustan Aeronautics Limited, Payable at Lucknow
Scanned Copies of EMD is to be uploaded on e-portal and original to be dispatched to HAL by post/ courier in order to reach us prior to tender closing date & time as indicated in bid. Failure in receipt of original EMD before tender due date & time will result in rejection of offer. Please mention following information on envelope carrying EMD: 1) Title: EMD for E-tender Bid No.: 2) Tender No. & Due Date: 3) Tender Description: 4) Complete Name & Address of firm submitting EMD
Please dispatch the Original EMD to following address: Head of the Department (Plant Maintenance) Hindustan Aeronautics Limited, Faizabad Road, Accessories Division, Lucknow-226016 (UP)
Firms exempted from submission of EMD must attach a certified copy of GOT's authority allowing for such exemption. The offers without EMD/ EXEMPTION certificate shall be considered as unresponsive and rejected.
Unpriced Bid shall be opened as per schedule indicated on e-portal.
2 EMD shall be refunded to unsuccessful bidders after evaluation of L-1 vendor.
3 EMD will be forfeited, if the bidder withdraws/amends or derogates from the tender in any respect within the validity period of his offer submitted.
4 Scan copies of under-mentioned documents to be uploaded on e-portal:
a). Proof for PAN No.
b). GST Registration Certificate.
c). Firm PF & ESI certificate (if applicable).
d). MSME registration certificate (if applicable).
e).Financial standing/Solvency Certificate for minimum value of Rs. 5,72,418/- from any nationalized/scheduled bank issued within the period of 12 months from the final date of submission of tender.
f). Earnest money of Rs. 20,000.00 in the form of Demand Draft, in favor of Hindustan Aeronautics Limited, Accessories Division, Lucknow from any nationalized/scheduled bank of India.
g). Average annual financial turnover during last three years, ending 31st March of previous financial year should be at least Rs. 4,29,314.00. Audited proof to be attached.
h). Proof of experience of having successfully completed similar work during last 7 years ending last day of months previous to the one in which tender are invited should be either of the following. i) Three similar completed works each costing not less than the amount Rs.5,72,418/-. Or ii) Two similar completed works each costing not less than the amount Rs.7,15,523/-. Or iii) One similar works completed each costing not less than the amount Rs. 11,44,836/-. * Here similar work means AMC/Repair/maintenance/supply & Installation works of Industrial Electrical / Electronics items etc.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 0.05 MB
D_Price_format.xlsm
TENDER_DOCUMENT • 0.01 MB
List.xlsx
TENDER_DOCUMENT • 0.03 MB
B_TERMS_CONDITIONS.xlsm
TENDER_DOCUMENT • 0.01 MB
C_Technical_Compliance_Matrix.xlsm
TENDER_DOCUMENT • 0.01 MB
Eligibility_criteria.xlsm
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .