Construction of Barracks with 50 Nos. Bed for Armed Reserve Police with development works at ARIYALUR in Ariyalur District

E0001) Earth work excavation for foundation in all soils (including refilling) a) 0 to 2 mt.

E0005) Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

E0006) Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a) 0 to 2 mt.

E0009) Earth work excavation in SDR for Open Foundation (Excluding Refilling) b) 2 to 3 mt

RE0006) Providing Pre-Constructional Antitermite treatment

F0001) Supplying and filling in foundation and basement with filling crushed stone sand

F0006) Supplying and filling with 40mm size Hard broken stone jelly in foundation and basement

F0007) Supplying and filling with 20mm size Hard broken stone jelly in foundation and basement

F0026) Filling in foundation and basement and other similar works with Excavated earth

F0015) Supplying and filling of Stone dust in Foundation and Basement

F0013) Supply and filling in foundation and basement with gravel (including Tax collected by Govt. Per Cum)

F0018) Supplying and filling the low lying area with conveyed gravel (including Tax collected by Govt. Per cum)

F0043) Supplying of 3 to 10mm size HBSJ including conveyance and cost of materials

FL0115) Supplying and laying of 83mm tk rubber moulded hydraulic pressed paver block including conveyance charges and Labour charges for spreading and levelling of 3mm to 10mm size HBSJ and stone dust to the required thickness with compaction by earth rammer and laying of 83mm thick Paver block

C0027) Plain cement concrete 1:5:10 for foundation and basement using 40mm gauge hard broken stone jelly

C0029) Plain cement concrete 1:2:4 for foundation and basement and other similar works using 20mm gauge HBSJ with Admixture

CS0038) Supplying and fixing of precast cement concrete slab for cupboard/ ward robes, shelves, cover slab for chambers, baffle walls etc., and other similar works 40mm thick using standardised concrete mix M20 II. 40mm thick b) In Ground Floor

c) In First Floor

C0049) Precast cement concrete Jally ventilator using standardised concrete mix M20 without vibrating charges 50mm thick a) In Ground Floor

C0038) Providing and laying in position, Standardised Concrete Mix M-20 Grade a) In Foundation and Basement

b) In Ground Floor

c) In First Floor

d) In Second Floor

C0055) Supplying and fixing Monolithic RCC door frames using standardised Concrete mix M20 Suitable Door of Sizes a) 900 x 2100 mm

C0013) Providing Rain water harvesting pit of 1.0m dia 0.60m depth and filling with CS sand and stone jelly of 40mm size and by augering 300mm dia bore pits to a required depth with stone jelly of 40mm size materials and perforated precast cover slab (M20) etc., all complete a) Providing Pit

b) Augering 30cm dia

CS0039) Supplying and Fixing of fibre mixed precast slab of 50mm thick of all required shapes made in C.C 1:3:6

B0016) Brick Work in Cement Mortor 1:5 using fly ash bricks of size (23x11x7cm) with Admixture in foundation and basement

B0027) Brick Work in Cement Mortor 1:6 using fly ash bricks of size (23x11x7cm) with admixture a) In Ground Floor

b) In First Floor

c) In Second Floor

B0054) Brick Partition wall in Cement Mortor 1:4 110mm thick for super structure using fly ash bricks of size (23x11x7cm) with Admixture a) In Foundation and basement

b) In Ground Floor

c) In First Floor

B0062) Brick partition walls in cement mortar 1:4 70mm thick using fly ash bricks of size 23x11x7cm with admixture a) In Ground Floor

b) In First Floor

FL0003) Supplying and fixing of 20mm thick bituminous expansion joint filler pad

FL0108) Flooring with a bed of cement concrete 1:5:10 using 40mm size hard broken stone jelly

FL0109) Plastering the top of flooring in Cement mortar 1:4, 20mm thick with admixture

FL0024) Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring

FL0025) Weathering Course with concrete broken brick jelly 20mm gauge

FL0047) Finishing top of roof with one course of hydraulic pressed tiles of approved superior quality of size 23cmx23cmx20mm thick with water proofing compound

FL0049) Supplying and fixing of colour glazed tiles over cement plastering in Cement mortar 1:2, 10mm thick with Admixture

FL0110) Supplying and laying of Ceramic tiles (Anti skid) over Cement mortar 1:3, 20mm thick with Admixture

FL0117) Supplying and fixing of Vetrified tiles of best approved quality (Ivory) 600x600x8mm for flooring and other similar works with Admixture

FL0028) Supply and laying superior variety concrete designer tiles for flooring in CM 1:3, 20mm thick with Admixture

FL0136.a) Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet

FW0004) Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

c) For Square and rectangular columns and small quantities such as sunshade, parapet cum drops window boxiing, fin projection and other similar works.

d) For Vertical wall

f) For Curved Surface

PL0003) Plastering with Cement mortar 1:5, 12mm tk with admixture

PL0006) Plastering with Cement mortar 1:4, 12mm thick with Admixture

PL0013) Special ceiling plastering in Cement Mortar 1:3, 10mm thick with admixture

PL0012) Plastering the Top of flooring in C.M 1:3, 12 mm thick mixed with WPC

PL0015) Plastering for border in CM 1:5, 12mm tk a) 150mm wide border

b) 75mm wide border

c) 50mm wide border

PA0001) White washing three coats using clean shell lime slaked

PA0022) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of Primer

PA0026) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats

PA0037) Painting the New walls with two coats of approved best ready mixed plastic emulsion paint for inner walls

PA0037A) Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

PA0044.a) Painting the ceiling with one coat of approved best ready mixed Plastic emulsion paint including primer

PA0027) Providing wooden (Melamen Door) Polish for new wood by removing by blade scrapping the exisiting dirt from the wooden surface

J0001) Supplying and fixing of Teak wood wrought and put up a) Teak wood over 2m and below 3m length

b) Teak wood below 2 m length

J0021) Supply and fixing of best approved superior variety magnetic door catches

J0029) Supplying of Mild Steel hold fasts horizontally twisted of size 230x40x4mm

JD0095) Supplying and fixing of WPC Solid door shutter with frame extruded with size 75mmx50mm

JV0022) Supply and fixing of UPVC (Un plasticized polyvinyl chloride) Louvered ventilators

JW0045) Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)

JW0044) Supplying and Fixing in position of UPVC Sliding window Two Track

JW0011) Supplying and fixing of best Indian Teak wood Glazed French window shutters of following size a) French window of size (1.00 x 2.10m)

JD0022) Supplying and fixing of Teak wood Panelled Double leaves door shutters with Brass fittings Suitable for Door of size a) 1800 x 2100 mm

JD0050) Supplying and fixing of Single leaf Solid core flush door shutters Suitable for Door of size a) 900 x 2100 mm

GR0001) Supplying and fixing Mild Steel grills as per the design approved

GR0056) Supplying & fixing of Stainless steel Hand Rails for Staircase (304 L Grade)

RE0004) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

CS0013) Supplying Cuddappah slab of 20mm thick and laying, finishing with two sides for cupboard, ward-robes shelves and other similar works I. 20mm thick a) In Ground Floor

b) In First Floor

RE0006.a) Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick

WS0220) Supplying and fixing of Precast kerb stone of 450x300x150mm made in CC 1:3:6 using 20mm size HBSJ

WS0002) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe

SA0073) Supply & fixing of CI Steps (not less then 5 Kg each)

WS0033) Supplying and fixing of half turn C.P Long body Tap of 15mm dia

WS0036) Supplying and fixing of half turn C.P short body Tap of 15mm dia

WS0004.b) Supply and errection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of 1000 litres

MS0053) Supplying and fixing of C.I man hole cover (Heavy duty) of approved quality and brand of size 0.60mx0.60m (50 Kg)

WS0007) Supplying, laying and fixing of 20 mm dia GI Pipe ‘B’ Class of best approved quality for Hot water line fully concealed in walls

WS0006) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness a) 32mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

b) 25mm dia ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0006.I) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D-1785 fully concealed in walls c) 20mm ASTM D schedule 40 threaded PVC pipe with necessary PVC/GI/GM specials

WS0107) Supplying and fixing of 32mm dia PVC Tee with end cap

WS0222) Supply and delivery of clear water vertical wet type 3 phase 2 HP - Submersible pumpset with ISI mark suitable for 150mm dia borewell

WS0264) Supply and delivery of 3 HP - Openwell Submersible pumpset with ISI mark suitable for 150mm dia borewell Duty - 50m x 60 lpm

WS0231) Supplying and fixing of the 150mm dia MS Borewell clamp set

WS0227) Supplying and fixing of 3 HP three phase panel board D.O.L with two level guard and auto start of Direct online starter

SA0122) Supplying, laying and jointing the following dia of UPVC Pipes below Ground Level a) 32mm dia UPVC pipe

b) 50mm dia UPVC pipe

WS0016) Supply and laying of following dia G.I pipes Below ground level a) 80mm dia GI Pipe

WS0015) Supply and laying of following dia G.I pipes Above ground level a) 20mm dia GI Pipe

b) 50mm dia GI Pipe

c) 80mm dia GI Pipe

EL0611) Supplying, laying and fixing of 25mm Dia Rigid Pipe of best approved quality in walls /Below GL

WS0242) Supplying of 40mm dia cast iron adopter

WS0018) Supply and fixing of following dia GI/GM Specials of best approved quality, with ISI mark a) 50mm dia GI Union

b) 20mm dia GI Bend

c) 50mm dia GI Bend

d) 80mm dia GI Bend

e) 25mm dia GI Hex Nipple

f) 32mm dia GM Gate valve

g) 50mm dia GI Hex Nipple

h) 50mm dia GM Non Return valve

SA0192) Supplying and fixing of following dia UPVC / PVC specials a) 50mm dia UPVC Tee

b) 50mm dia UPVC Elbow

c) 50mm dia UPVC Coupler

d) 50 x 40mm dia UPVC Reducer Tee

e) 90 x 20mm dia PVC Saddle piece

WS0243) Supplying laying and fixing of following dia UPVC Column pipe for borewell b) 40mm dia UPVC Column Pipe

WS0238) Drilling of 150mm vertical bores in hard rock area to any required depth as desired by TNPHC officials including labour charges for grouting and inserting the casing pipe in the drilling hole etc., a) Upto 150m depth ending below Ground level

b) From 151m upto 180m depth below Ground level

c) From 181m upto 210m depth ending from Ground level

d) From 211m upto 240m depth ending from Ground level

e) From 241m upto 270m depth ending from Ground level

WS0148) Supply and delivery of 200mm dia of PVC casing pipes a) 200mm dia PVC Pipe (Casing Medium Depth)

b) 200mm dia PVC Pipe (Ribbed Screen pipe)

WS0262) Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD Officers and conducting yield test by ‘V’ notch method.

WS0207.a) Supply and fixing of 200mm dia PVC end cap for borewell top cover

SA0002) Supplying and fixing of porcelin wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories

SA0036) Supplying and fixing of PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl a) 110mm dia PVC SWR pipe of 3m with required PVC cowl & PVC specials etc.,

SA0039) Supplying and fixing 150mm x 100mm size stone ware Gully trap with iron gratings

SA0045) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) having minimum water seal of 50mm

SA0113) Supply and fixing of 10 litre capacity Handle type PVC low level flushing tank

SA0019) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm X 440 mm In Ground floor.

SA0020) Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580mmx440mm (Other than ground floor)

SA0025) Supplying and fixing EWC superior variety (white) 500mm with 'P' or 'S' trap

SA0033) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,

SA0035) Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirmed to IS 13952-1992 Type-B for waste water line

SA0048) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110 mm dia UPVC Non Pressure pipe

b) 160 mm dia UPVC Non Pressure pipe

SA0052) Supplying and fixing of following dia PVC Bend a) 110mm dia PVC Bend

b) 160mm dia PVC Bend

SA0053) Supplying and fixing of following dia PVC Equal tee a) 110mm dia PVC Equal Tee

b) 160mm dia PVC Equal Tee

SA0155) Supplying and fixing of CP Two Way Bib Cock with Health Faucet approved quality with ISI mark

SA0186) Supplying and fixing of CP Angle cock Tap

WS0126) Supplying and fixing of C.P. shower arm with over head shower rose of best approved quality with ISI mark

SA0009) Supplying and fixing of CP Shower valve with Wall Flange

SA0070) Supply and delivery at site and fixing of SFRC manhole cover with frame and locking arrangements a) 750mm x 750mm

MS0002) Supplying and fixing of 20mm dia Aluminium Hanger Rod to the required length

MS0003) Supplying and fixing of Aluminium Towel Rail of 75cm long

MS0006) Supplying and fixing of Aluminium plate with five pin for Coat Stand

MS0007) Providing and fixing iron Chromium plated 8 gauge Picture hook

MS0008) Supplying and fixing of Bevelled Edge Mirror of approved quality and brand of size 500x400x5.5mm shelf type

L0001) Supply and planting Avenue Trees

L0004) Supplying and fixing of Triangular shape chicken mesh Tree guard

EL0001) Wiring with 1.5 sqmm PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark confirming to IS 694/1990 1.1 K.V. grade cable a) Light point with ceiling rose

b) Light point with bakelite battern type holder

c) Point wiring for calling bell/buzzer with push type switch with required Buzzer.

EL0010) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Fan Point

EL0018) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable for Stair case light point

EL0026) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 K.V. grade cable for 5 Amps 5 Pin plug Socket Point @ Switch Board Itself

EL0034) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 Amps 5 pin Plug Socket Point at Convenient Places

EL0041) Supplying and fixing 15 Amps 3 pin plug type wall socket with switch

EL0214) Earthing and Earth connections: Providing Earthing Station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0m of 20mm B-class GI pipe including all requirements

EL0241) Supplying and fixing best country wood meter cupboard

EL0074) Supply and fixing of best approved superior variety concealed type Fibre box with M.S. Fan Hook

EL0075) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator

EL0078) Supply and delivery of following Electric Ceiling fan with ISI mark a) 48" Electric fan 1200mm sweep

EL0084) Supplying and fixing of 300 mm dia sweep AC exhaust fan

EL0070) Supplying and fixing of 9 watts LED bulb

EL0047) Supplying and fixing of 4'18 watts crystal LED tube light and fixing the tube light fittings

EL0045) Supplying and fixing of water tight Bulk head fitting suitable for 12w LED bulb with guard

EL0100) Supplying and fixing of 25 watts LED bulb with Street light fittings arrangements

EL0072) Supplying and fixing of 12 Watts LED Bulb for Bulk head fittings

EL0169) Supply and fixing of 32 Amps Double pole main switch with fuse and neutral link

EL0186) Run of main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0190) Supply and Run off main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0191) Supply and Run off main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0203) Run of main with 4 wires of 6 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable

EL0561) Supplying and fixing of Single Pole MCB 6A to 32A, 10KA

EL0252) Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

EL0338) Labour charges for laying of PVC aluminium armoured LTUG cable in a trench to a depth of 0.75m including earth work excavation, providing sand cushion, brick layer protection and refilling etc., Below Ground level

EL0341) Labour charges for fixing of PVC aluminium armoured LTUG cable on post and wall to make good Above Ground level

EL0264.a) Supply and fixing of 40 Amps Four pole MCB Isolators

EL0139) Supply and fixing of 150W LED street light fitting with LED (Lower end) with 40mm dia. GI pipe (class B) with 1 no.40 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting

EL0242.a) Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame

EL0004) Wiring with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable (open wiring) a) Light point with ceiling rose

EL0235) Supplying and fixing of 1 No of 450x375x20mm thick TW plank varnished with 3 Nos of 32 amps 500 volts grade porcelin fuse unit

EL0298) Supply and fixing of 32 Amps Electro mechanically operated three phase Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/RCCB) Three phase

EL0174) Supplying and run of 8 SWG GI wire for earth connection on wall / below ground level

EL0342) Supplying and delivery of Brass cable Gland suitable for PVC Aluminium armoured LTUG cable a) 3.5 core 50 Sqmm Brass cable gland

EL0344) Supply and providing cable end termination of following PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete a) 3.5 core of 50 Sqmm PVC Armoured ALTUG cable end termination

EL0389) Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars

EL0337) Supplying and delivery of following PVC aluminium armoured LTUG cable a) 3.5 core 50 Sqmm PVC aluminium armoured LTUG cable

WS0246.a) Labour charges for the erection of three phase Upto 5 HP submersible pumpset in borewell / openwell

EL0349) Supply and delivery of 3 core 4 sq.mm flat type copper cable

WS0235) Supply and delivery of required dia nylon rope

NL0001) Supplying Fabrication and Erection in position of M.S. scheme name and layout board

NL0005) Supplying and fixing in position of Aluminium dye casting TamilNadu Police round Logo emblem b) 45 cm Round logo (18")

NL0006) Supplying and fixing of following size Aluminium dye casting lettering and numbering a) 12" Aluminium Dye casting letters

b) 9" Aluminium Dye casting letters

NL0007.a) Supplying and fixing of plastic name board of required size with Stikness cut in computer to the depth cost & fixing charges

NL0005) Supplying and fixing in position of Aluminium die casting TNPHC Emblem a) 60 cm TNPHCL Emblem (24")

MS0057) Supplying and delivery of following Godrej / Equivalent Navtal Lock b) 7 Levers - 3 Keys Lock

GR0053) Supplying and fixing in position of colour Galvalume sheet of 0.47mm thick inclusive of overlap length

GR0059) Supplying, fabrication and fixing in position of mild steel angle truss including cost of materials and labour charges

Please Enable Macros to View BoQ information