SPECIAL REPAIR TO BLDG NOS T 85 (JCOs QTRS) OF SOUTHERN COMD COMP SIG REGT T-92, 93, 97, 98,102,103,107 AND 108 (08 X ROOM TENT TYPE QUARTERS) FOR 134 (I) WKSP EME (SIG GP) AT DUNKIRK LINE UNDER GE (C) KIRKEE

Amount

Dismantling of single layer Mangalore pattern or similar tiles in roof coverings at any height complete all as specified and as directed.

Dismantling of single layer Mangalore pattern or similar tiles in roof coverings bedded in lime or cement mortar at any height complete all as specified and as directed.

Dismantling at any height battens for tiles, shingles etc of any size including tilting fillets spaced exc 15cm complete all as specified and as directed.

Dismantling timber in scantling 40 sq.cm and over in section in any position (Unframed work) complete all as specified and as directed.

Dismantling at any height timber scantling as in fillets, rail, posts rafter, purlins etc under 40 sq.cm in section (Unframed work) complete all as specified and as directed.

M & L for providing cement concrete type B-1 (1:2:4) using 20 mm graded crushed stone aggregate as in coping/benching/bed block and the like including necessary form work complete all as specified and as directed.

S & F rolled MS section as in roof trusses (framed), trussed, verticle members of sheds, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed with angle cleats or other connecting plates confirming to Fe 410-W grade E-250 quality B complete.

S & F rolled MS section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-W grade E-250 quality B complete all as specified and as directed.

S & F MS screw bolts machine made with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of neck 5 to10mm and length exc 5cm and n exc 10cm complete all as specified and as directed.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering as in ridges / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling old ceiling board of any description including cover fillets (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified and as directed.

S & F Gypsum reinforced boards 600x600x8-10mm thick for ceiling hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 2mm dia to be fixed by approved rawl plugs, level and justers and screws etc, The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm from adjacent center to form 1200x600mm moulds cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instructions and finishing the surface by applying two coats of plastic emulsion paint complete all as specified and as directed.

Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site complete all as specified and as directed.

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site complete all as specified and as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each and removing form site complete all as specified and as directed.

S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, ventilator with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, including M & L for providing PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified and as directed.

S&F 35 mm thick factory made shutters of second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified and as directed.

S&F 35mm thick 2nd class HW glazed or skelton shutter open rebated divided into square with plain chamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR pt-1 complete all as specified and as directed.

S&F 200mm size Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 300 mm aluminium anodised sliding door bolt plate type, not less than 12 mm dia with and including aluminium of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate length of bolt 300 mm welded to door shutter/frame complete all as specified and as directed.

S&F mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in floor 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S&F Factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed.

Providing and fixing 30mm thick “RAJSHRI” BRAND FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

S & F 100mm long stainless steel medium weight butt hinges for wooden/door shutters and frames fixed with bright screwes complete all as specified and as directed.

S & F aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and as directed.

S&F Aluminium handles, cast type, anodised of size 150mm, fixed with screws or welded, complete all as specified and as directed.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and as directed by Engr-in-Charge.

S&F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge

S & F Mild steel work as in frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

Demolition at any height of brick /PCC block masonry built in cement mortar complete all as specified and as directed.

M&L brick work with Modular sub class 'B' bricks straight or curved on plan built in cement mortar 1:6 complete all as specified and as directed.

M & L taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M & L rendering 15 mm thick on fair faces of stone/ block masonry surfaces on walls in CM 1:4 finished even and smooth mixed with water proofing compound of approved make complete all as specified and as directed by Engr-in-Charge.( Note : WPC shall be measured and paid seperately)

M & L rendering 15 mm thick on fair faces of stone/ block masonry surfaces on walls in CM 1:6 finished even and smooth complete all as spd and directed by Engr-in-Charge.

M & L preparation of new plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-charge.

M & L preparation of old plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of new plastered or unplastered surfaces of wall, and applying two coats of cement base paint (white or tinted) over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying two coat of cement base paint (white or tinned) complete all as specified and as directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for 25 mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate as in leveling course complete all as specified and as directed.

M&L coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertifical surface 450x350x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering as in backing coat in cement mortar 1:4 complete all as specified and as directed.

M&L Machine cut cudappa stone slab 20-25mm thick as in steps, jambs, pillars, window- cills, cooking platforms, and like over and including 15mm thick cement screed base in CM (1:4) and jointed in grey cement slurry mixed with pigment to match with shade of slab rubbing, polishing and rounding to edges includimg demolition of existing cill/cooking platform complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above ground level complete all as specified and as directed.

M & L 100mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in subbase over rammed earth complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

M&L machine cut mirror polish kota stone slab flooring 20-25mm thick over and including 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners, providing lines at edge of corners rubbing and mirror polishing complete all as specified and as directed.

M&L machine cut mirror polish kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners, rubbing and mirror polishing complete as specified and as directed.

M&L 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate laid in panels surface finish even and smooth without using extra cement as in plinth protection/path complete all as specified and as directed.

M&L taking up or down 15mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.

M&L taking up or down 20mm bore existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and as directed.

S&F 15mm bore GI water tubing medium grade galvanised with all fittings and fixed to walls and ceilling or laid in floor complete all as specified and as directed.

S&F 20mm bore GI water tubing medium grade galvanised with all fittings and fixed to walls and ceilling or laid in floor complete all as specified and as directed.

Refixing 15mm or 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

S&F in repair Bib tap long body cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule for 15 mm bore of pipe complete all as per Prayag Cat Part No 8308 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

S&F in repair angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as per Prayag Cat Part No 8310 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

S & F in repair PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and as directed.

S&F in repairs Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down, screwed both end for iron pipe or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as per Prayag Cat Part No 8318 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

S & F in repairs CP shower rose 225mm round with arm and flange incl fixing to steel pipe complete all as per Prayag Cat Part No BS-30 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

S&F in repair 0.85mm thick stainless steel kitchen plate rack SIZE (24"X36"X10") three tire complete all as per Prayag Cat Part No P-336 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes including CI cantilever bracket & connection union to pipe over all size 915mmx460mm & bowl size 410 x330x160mm complete all as specified and as directed.

Material and labour for Vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per CERA Cat No S 2040109 or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and directed.

S&F 32 mm bore PVC flexible waste pipe 1000mm long of approved make suitable for WHB, Sink, Urinals etc complete all as specified and as directed.

S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and as directed.

S&F in repair towel rail 450 mm long of PTMT fixed with and including chromium plated brass screw and wooden / plastics cleats ( min wt 170 gms) complete all as specified and as directed. (Make : Prayag/Jaquar/crown)

S & F in repairs PVC (SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

S & F in repair of 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches, floor and wall including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed.

S & F in repairs PVC (SWR) bends 75mm dia bore any radius with access door complete all as specified and as directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.(Make: Prayag Cat No. BA-45 or techno commercially equivalent makes specified in PS)

S&F in repairs Stainless steel fancy type curain rod 25 mm including SS brackets, decorative knobs, and including all necessary fittings such as rawl plug screws complete all as specified and as directed.

M&L non skid ceramic coloured tiles, joint free 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles over and including screed bed or bedding layer of mortar 15 mm thick average thickness in cement mortar (1:6), complete all as specified and as directed.

M&L non skid ceramic coloured tiles, joint free 7 to 8 mm thick (square or rectangular) area of each tile exe 0.18 Sqm but n.exe 0.38 Sqm in skirting, over 10mm thick screed bed in CM 1:4 on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed.

M&L for rendering 10mm thick plaster in cm (1:6) on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, all as specified and as directed.

Supply only approved integral water proofing compound complete all as specified and as directed by Engr-in-Charge.

M&L three coats of white wash on walls including preparation of new plastered surface complete all as specified and as directed.

S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides both face is covered with decorative face veneer with lipping/frame to match as in door shutters complete all as specified and as directed.

M&L preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

S & F in repair Pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm bore dia pipe complete all as per Prayag Cat Part No 8304 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

S&F in repairs Stop valve (Concealed) cast copper alloy chromium plated fancy type screw down, screwed both end for iron pipe or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as specified and as directed. (Make Queens Jaquar Cat Part No QQT-7053 or techno commercially equivalent makes specified in PS.)

Material and labour for Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per CERA Cat No CALINA S 3010102 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repairs complete all as specified and directed.

Material and labour for PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

S & F in repairs PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal complete all as specified and as directed.

S & F in repairs PVC (SWR) branch piece, single (single Y) 75mm dia equal or unequal complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.

M&L for precast cement concrete block masonry of grade C-5 having density not less than 1800 kg/cum and 28 days average minimum compressive strngth of block should be 5 N/sqmm as in walling set in cement mortar 1:6 complete all as specified and as directed.

M&L 10cm thick precast hollow cement concrete block masonry of PCC 1:2:4 (using 16mm graded stone aggregate) as per IS 283 set in cement mortar 1:4 complete all as specified and as directed.

M&L PCC 1:4:8 type D2(using 40mm graded stone aggregate) as in foundation filling and mass concrete or as in sub base of floor complete all as specified and as directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with L-type or J-type or cranked hook bolts including Dismantling of plain or corrugated sheeting any gauge thickness including AC sheet, Nainital or similar pattern as in roof covering complete all as specified and as directed.

Excavation in trenches in hard dense soil not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as directed.

Removing excavated surplus soil not exc 50 m and depositing where directed at level n.exc 1.5 m above the starting point complete all as specified and directed.

Demolition and breaking up 150mm bore drain pipes (SGSW/AC/RCC) including haunching and benching set in cement mortar complete all as specified and as directed.

M&L for providing plain cement concrete 1:3:6 type C-2 (Using 40 mm graded stone aggregates) as in concrete bed to drain pipes for 150 mm bore dia including packing under haunching against the side of pipe after laid and tested etc. complete all as specified and as directed.

M&L for Reinforced cement concrete pipes,150 mm bore of pipes Class NP-2, laid and jointed with collars complete all as specified and as directed.

Demolition of RCC manhole covers including RCC slab set in cement mortar complete all as specified and as directed.

M&L Precast RCC slab 1:2:4, type B1(using 20mm graded stone aggregates) as in cover slab (for manholes), landings, chajjas, water troughs, hangers, shelves and similar articles with plain faces set in CM 1:6 complete all as specified and as directed.

M&L TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Cleaning of existing septic tank/manhole of 10 to 25 users capacity by removing water, sludge, stones, solid particles etc complete by cleaning Mechanical suction equipment and disposing the same through mechanical transport and removing the same out of defence land and burried complete all as specified and directed.

Taking down copper/aluminium point wiring ( light, fan, socket, power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surface of walls, floors, etc complete all as specified and directed.

M & L surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one Fan/Exhaust fan or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc complete all as specified and as directed by Engr-in-Charge.

All as per Item No 110 above for One three pin 5 Amp socket outlet point with cables 1.5 sqmm size on independent board complete all as specified and as directed.

All as per Item No 110 above for One three pin 5 Amp socket outlet point with cables 1.5 sqmm size on same board complete all as specified and as directed.

All as per Item No 110 above but FRLSH copper stranded cable of size 2.5 sq mm for 3/6 pin socket outlet 15 amp on one independent board alongwith all fitting and accessories complete all as specified and as directed.

M & L for sub main wiring with two single core PVC insulated multi stranded FRLSH Copper conductor cable of size 6.0 sqmm drawn through in and including PVC conduit with all accesories and one single core green colour FRLSH Copper conductor cable of size 6.0 sqmm as earth wire and connected to earth dolly and making good to disturbed surfaces completed all as specified and as directed by Engr-in-Charge. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping will be measured as one unit (RM)

S&F stepped type electronic fan regulator for ceiling fans including necessary connections of capacity 100 watts. 240 Volt complete all as specified and as directed by Engr-in-Charge.

S&F 5 Amp switch piano type single pole one way complete all as specified and as directed by Engr-in-Charge.

S&F 5 Amp Bell push flush types complete all as specified and as directed by Engr-in-Charge.

Supply and fix socket outlet of 2 in 1, 3 pin 5 amp complete all as specified and as directed by Engr-in-Charge.

Supply and fix switch socket combination multipurpose outlet comprising of 3 pin 15 amp socket out let & switch one pin, 5 amp controlled by one switch suitable for 3 pin plug top complete all as specified and as directed by Engr-in-Charge.

S&F ceiling rose surface PVC 65 x 50 mm two/three terminals complete all as specified and as directed by Engr-in-Charge.

S& F sheet metal enclosure for DBs SPN 8 Way double door type 230 Volts complete all as specified and directed by Engr-in-Charge.

S&F in repair MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’B” curve complete all as specified and as directed by Engr-in-Charge.

S&F in repair MCB, SPN 40 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve complete all as specified and as directed by Engr-in-Charge.

S&F LED batten Light 20 watt, 4 feet AC, PF-0.95 (min), sleek and seamless profiled extruded aluminium batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and as directed by Engr-in-Charge. (Make- Wipro cat part No-LL20-221-XXX-65AL1 or techno commercially equivalent in CG/Philips/Havells)

S&F LED batten Light 10 watt, 2 feet AC, PF-0.95 (min), sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and as directed by Engr-in-Charge. (Make- Wipro cat part No-LL20-111-XXX-65NE3 or techno commercially equivalent in CG/Philips/Havells)

S&F lamp Holder insulated body with back plate for batten/angle complete all as specified and as directed by Engr-in-Charge.

S&F LED Lamp 12 watt (B-22) pin type all as specified and directed by Engr in charge. (Make CG/Bajaj/ Philips/Wipro)

S&F bell electric AC 240 volt, 50 HZ all as specified and as directed by Engr-in-Charge.

S&F LED building security light 20 watt, 230V, with lens, PF-0.95 (min) complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/40mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed by Engr-in-Charge. (Make-CG Cat Part No LSTS-20-CDL-M or techno commercially equivalent in Philips/Bajaj/wipro)

S&F MCB DB double door 4 way TPN vertical with 200 Amps rated bus bar 240 volts complete all as specified and as directed by Engr-in-Charge.

S&F MCB TPN 40 Amps, 415 volt 10 KA complete all as specified and as directed by Engr-in-Charge.

M&L for Rewinding of Ceiling fan 1400 mm/1200 mm sweep after dismanting complete motor assy, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size/turn of super enamelled copper wire, heating, varnishing, replacement of unsv bearings / bushings, assemble of rotor and starter unit with capacitor, connecting wire, down rod, blades,one coat of painting complete with white enamel paint and testing complete including removal and refixing. Note: 1. Contractor will collect fans from site and bring back to site after repair. Cost of transportation will be inclusive of quoted rate. 2. Spares require for replacement such as bearing, Bushing, capacitor shall be measured and paid separately as supply only. 3. Cost of Connector block and capacitor holder shall be inclusive of the quoted rate.

Supply only ball bearing No 6201/6202/6203/6204 of SKF/Tata/NBC.

Supply only G.M. Bush for bearing for ceiling fan as per existing pattern.

Supply only capacitor AC for 230 volts 50 Hz of capacity 1.8 Mfd.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engr-in-Charge. (Make : (Note - Old UNSV ceiling fan deposit to MES store)

S&F Exhaust fan 300 mm sweep made of with sturdy engineering plastic with louver shutter, 230 volt 50 Hz 1200 RPM, copper wound energy efficient all as specified and as directed.

S &F Exhaust fan 250 mm sweep made of with sturdy engineering plastic with louvre shutter,230 volt 50 Hz 1200 RPM,copper wound energy efficiant all as specified and as directed. Note - Old UNSV ceiling fan deposit to MES store

M & L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed by Engineer-in-charge.

Supply, laying and testing of UG cable, XLPE insulated, screened, PVC bedded galvanised steel strip or wire, armoured, electric power cable (heavy duty) with stranded aluminium conductor, 1100 volts grade of size 16 sqmm 4 core including taking down the existing unserviceable cable complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft loose soil complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe and getting out in soft disintegrated rock complete all as specified and as directed by Engineer-in-charge.

M&L fine stone dust for cushioning of UG cable/ at cable trenches complete all as specified and as directed by Engineer-in-charge.

M&L for brick protection with sub class 'B' brick for UG cable complete all as specified and as directed by Engineer-in-charge.

M&L for road cutting upto 300mm deep and 200mm wide for crossing GI water pipe line through road including making good the disturbed surface by filling mass concrete complete all as specified and as directed. (Note: Mass concrete will be measured and paid as saperate item.)

M&L GI tubing light grade 40mm bore, ISI marked, for cable protection complete all as specified and as directed.

Supply and Fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

vishalconstruction

MAHESH DADAJI BACHHAV

V.R.PRAJAPATI AND CO.

VP DEVELOPERS AND CONTRACTOR

JP ENTERPRISES

DARSHAN ENTERPRISES