Janpad Varanasi me Dalmandi marg ke Chaurikaran evm Suddhrikaran ka karya

Amount

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m(Including all material,labour,T&P,taxes&labour cess but excluding GST)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.by mechanical means all lifts and lead upto 5000m(Including all material,labour,T&P,taxes&labour cess but excluding GST)

Construction of Subgrade and embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2.(Including all material,labour,T&P,taxes&labour cess but excluding GST)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres Dismantling stone pitching/ dry stone spalls.(Including all material,labour,T&P,taxes&labour cess but excluding GST)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 5000metres RCC Work (Including all material,labour,T&P,taxes&labour cess but excluding GST)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 5000metres Brick Work (Including all material,labour,T&P,taxes&labour cess but excluding GST)

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401(Including all material,labour,T&P,taxes&labour cess but excluding GST)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.(Including all material,labour,T&P,taxes&labour cess but excluding GST)

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.(Including all material,labour,T&P,taxes&labour cess but excluding GST)

Providing and laying dense graded bituminous macadam grading I with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30@ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.(Including all material , labour,T&P,taxes&labour cess but excluding GST)

Providing and applying tack coat with bitumen (VG-10) using bitumen pressure distributor at the rate of 0.200 kg per sqm on the prepared bituminous surface cleaned with mechanical broom (over DBM Gr-I).(Including all material,labour,T&P,taxes&labour cess but excluding GST)

Providing and laying bituminous concrete grading II with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects(Including all material,labour,T&P,taxes&labour cess but excluding GST)

Providing and laying PCC Grade M15 using batching plant & manual placing (Including all material,labour,T&P,taxes&labour cess but excluding GST)

Providing and laying RCC Grade M25 using batching plant transit mixer & manual placing(Including all material,labour,T&P,taxes&labour cess but excluding GST)

Supplying, Fitting and Placing un-coated Mild steel reinforcement in Foundation complete as per Drawing and Technical Specifications. (Including all material,l abour, T&P, taxes & labour cess but excluding GST)

Structural steel work in single section, fixed with or without connecting plate, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete.for Utility cable trey (Including all material,labour,T&P,taxes&labour cess but excluding GST)

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications.(Including all material,labour,T&P,taxes&labour cess but excluding GST)

12mm thick plaster with cement mortar in proportion of 1:4 cement and sand of 1.25 F.M. over brick work minimum thickness not be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work.(Including all material,labour,T&P,taxes&labour cess but excluding GST)

Providing and fixing of 560 mm dia heavy duty CI cover for manhole (Including all material,labour,T&P,taxes&labour cess but excluding GST)

Laying Reinforced cement concrete pipe NP3/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. 1000 mm dia (Including all material, labour, T&P, taxes & labour cess but excluding GST)

Laying Reinforced cement concrete pipe NP3/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . 750 mm dia (Including all material, labour, T&P, taxes & labour cess but excluding GST)

Chequerred precast cement concrete tiles 20mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). for footpath (Including all material, labour, T&P, taxes & labour cess but excluding GST)

Providing and fixing of CNC machine cutting Mild Steel Railing for footpath proper completion of all works but excluding excavation & concrete for foundation and painting works (Including all material, labour, T&P, taxes & labour cess but excluding GST)

Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work (for painting of CNC machine cutting Mild Steel railing)(Including all material,labour,T&P,taxes&labour cess but excluding GST)

Supply and errection of Victoria electric poles 7m long with all its assisorises in center of median required for proper complation of work as per direction of E/I ( on both side of footpath ) @ 15m between pole to pole (Including all material,labour,T&P,taxes&labour cess but excluding GST)

Construction of K.C. Drain with present CC black size (370 x 250 mm) laid flate position (37.50 mm in length) and Kerb stone (30 cm in length) including cost of all material, labour, and T&P etc complete.(Including all material,labour,T&P,taxes&labour cess but excluding GST)

M/s Suman Engineering Works (BID ID -5123875)