REPAIR/REPLACEMENT OF CERTAIN MAINTENANCE OF B/R AND E/M WORKS AT KHASA UNDER AGE (I) AIR FORCE AMRITSAR

Amount

B/R PORTION

Demolition of brick work built in cement mortar including all quoins,arches pillars etc all as specified and directed by Engr-in-Ch.

Demolition of cement concrete ( unreinforced) of any description and in any position not otherwise specially provided for complete all as specified and directed

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge .

Providing PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation complete all as specified and directed.

M&L for Brick work built in cement mortar 1:6 using old size sub class "B" bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed .

M&L for Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 using without extra cement complete all as specified and directed.

M&L for Providing PCC 1:2:4 type B-1 using 20mm graded crushed stone aggragate as in benching & coping including necessary form work complete all as specified and directed .

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopper ends etc complete all as specified and directed .

Taking down cement plaster on brick concrete surfaces etc including racking out joints hacking for key,scrubbing down with water etc from walls and ceiling surfaces of any description & removing debries out side of MD land complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar(1:4) on fair face of brick work or concrte surfaces finished surface even and smooth with using extra cement complete all as specified and as directed by EIC.

M&L for rendering 15mm thick cement plaster in cement mortar (1:4) with water proofing compound @ 3% by weight of cement finished even and smooth without extra cement complete all as specified and directed. Note:- WPC shall be measured and paid for separately.

Returning,filling in trenches including spreading watering and well ramming in layers not exc 25cm thick in soft.loose soil complete all as specified and as directed .

Removing excavated materials to a distance not exc 50m and depositing where directed by EIC at a levlel not exc 1.5 m above the starting point.

Demolition and breaking up drain pipes 100 mm internal dia( salt glazed ware, AC or reinforced concrete set in cement mortar complete all as specified and directed .

Demolition and breaking up drain pipes 150 mm internal dia( salt glazed ware, AC or reinforced concrete set in cement mortar complete all as specified and directed .

Demolition and breaking up drain pipes 200 mm internal dia( salt glazed ware, AC or reinforced concrete set in cement mortar complete all as specified and directed .

M&L for Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 100mm dia SGSW pipe complete all as secified and directed

M&L for Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 150mm dia SGSW / RCC NP-2 pipe complete all as secified and directed

M&L for Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 200mm dia SGSW pipe complete all as secified and directed

M&L for 100mm internal dia SGSW drain pipe grade "A" laid in trenches and jointed in cement mortar vcomplete all as specified and directed

M&L for 150mm internal dia SGSW drain pipe grade "A" laid in trenches and jointed in cement mortar vcomplete all as specified and directed

Reinforced concrete pipe 150mm dia class NP-2 laid and jointed concrete with collar all as directed

M&L for 200mm internal dia SGSW drain pipe grade "A" laid in trenches and jointed in cement mortar vcomplete all as specified and directed

M&L mild steel TMT bars 10 mm dia and over cut to length bent to shape required inclduing cranking bending spirally for hooping ends and binding with and incl mild steel wire (annelaed) not less than 0.90 mm dia or securing with clips.

Cleaning of underground sewage pipe line of 100mm dia including manholes by using suitable measures required as per site condition ( i.e. pressure pump/manually) and taking out all liquid ,solid waste matters,sewage and sludge,night soil refuse etc and burying in a pit to be dug out side the solid out side the defence land and covering top of pit with earth in layers of 25mm thick ness each complete all as specified and as directed .(The rate shall be deemed to include cleaning of manholes also and the length shall be measured including manholes.)

ditto as per Ser Item No 27 above but 150 mm dia.

Cleaning of sewage sump well by using pressure pump/ sewer suction muchine or Honeysuckers muchine and taking out solid sludge from sewage sump well including disposal of sludge in pit out side the defence land and covering the top with a layer of 25mm thick earth filling compacting leveling all as specified and as directed at the following installations:- (a) Sewage Sump near DSC Billet.(b) Sewage sump near Airmen billet. Note:- rates are inclusive of dewatering the sewage water including necessary T&P shall be arranged by the contractor. .

Cutting into existing manholes for connecting new drains 150mm internal dia old pipe and making good to pipe and rendering cutting out existing benching for forming branch channel (1/2 Band to 3/4 section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished, and reforming benching as required all as specified and directed

Clearing blockage of chocked up WC on ground/frist floor including soil/waste pipe (waste pipe upto 1st manhole) and cleaning of 1st manhole complete all as specified and directed. Note :- Contractor shall make sure that blockages will cleared within six hours after notifying the complaint,failing which a recovery @ 100/- per hour shall be made from contractor's due

M&L for Cleaning of blocked manholes of depth not exceeding 1.5 m, of any size, bailing out sludge/foreign matter and removing the same and burying in grounds at depth 1.00Mtr below GL at a distance n.exc 50 Mtr and placing back the manhole cover in original position

Providing precast cement concrete in kerb stone for footh path and paving etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed.

Supply and fixing punched tape concertina coil 610mm dia made with high tensile strength galvanized mild steel wire 2.60 mm dia as per IS 4454 strip material (galvanized MS strip as per IS-1730) upto 3 metre height of wall with angle iron 'Y' shaped placed 2.5metre to 3 metre apart and with 9 horizontal R.B.T stud tied with G.I staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron with reinforced barbed tape (RBT)/ spring core (2.6mm dia) wire minimum barb 9mm width, loop spacing 250± 20mm, coil length 9mm and fixed in position , complete all as specified and directed. . Note :-(i) The make shall be got approved by GE confirming to the specification before procurement.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for Light coloured Vitrified ceramic tiles light shade 10mm thick (Square/rectangular) polished, area of each tiles n. exc 0.36sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including M&l for CM 1:6 Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes over Brushing neat cement slurry with 3.0 Kg of cement per sq. Metre and Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , etc.all as specified and directed

M & L for coloured non skid/matt finish ceramic tiles, 7 to 8 mm thick, (square/ rectangular), area of each tile exceeding 0.11 sq.m but not exceeding 0.18 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.

M & L providing Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to math cement such as for skirting and dado including plastering 10mm thick in cm 1:3 complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5sq.m but not exc. 4sq.m each complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed.

S&F Presed steel frames for doors Size of frame 105 x 60 mm with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete as specified supplied and fixed.

S&F 30 mm thick Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed

S&F, 35 mm thick, 2nd class hard wood, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.

S&F Flush cub board shutters 25mm thick solid core construction, with block board core and plywood face panels, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

M&L for rendering 10mm thick cement plaster in cement mortar (1:3) on concrete surfaces as in ceiling, finished even and smooth without extra cement complete all as specified.

M&L for rendering cement plaster 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment & preparation of old plastered for ceiling surfaces and applying two coats of white wash complete all as specified and directed.

M&L preparing new plastered surfaces on walls two coat of primer paint, stopping nails holes and applying two coat of oil bound distemper with 1 mm wall care putty all as speified

M&L for complete removal of existing treatment & preparation of old plaster surfaces for wall any description two coats of oil bound distemper with 1mm wall care putty complete all as specified and directed.

S/F 15mm dia pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed in repair complete all as specified and directed.

S&F 15mm dia bib tap chromium plated cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm complete all as specified and directed.

S&F, extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 250 mm and fixed complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed screws or beading in steel/ wooden door / window complete as specified and directed.

S&F Sheet glass 3mm thick ordinary quality and glazing with oil putty in sqaures in n.exc 0.5 sqm in each panes ( any thickness,size,quality or description ) from wooden or steel frames with putty or fixed with beads, punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed.

M & L 75 mm thick Cement concrete type D2,1:4:8 (40mm graded aggregate) as in sub base,path,floor, hardstanding complete as as specified and directed by Engineer-in-Charge.

Providing, 50 mm thickcement concrete 1:3:6 in plinth protection type C1 with 20 mm graded aggregate finised even and smooth without using extra cement complete all as specified and directed.

Roughing of existing floor surfacevand prparing with wire brushes, sweeping cleaning and washing down with water to remove all loose dust/dirt etc complete all as specified and dircted.

Machine cut pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness Grade M-35 laid over screed bed or bedding of 15 mm thickcm1:6 complete all as specified and directed.

Precast chequered cement concrete tiles 30cm x 30cm x 22 to 25 mm thick with grey ecment and pigment set, jointed in neat cement slurry and pointed in coloured pigment to match the surface including 15 mm thick screed bed or beding layer for laying floor finishes in CM 1:6 complete all as specified and directed

S&F in repairs, Rotational moulded PVC water storage tanks 500 lit capacity, double walled (ISI marked) with ISI marking embossed on it (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old tank and removing to store all as specified.

Taking down steel tubing and connection of 15mm dia bore pipe.

Taking down steel tubing and connection of 20mm dia bore pipe.

M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed.

ditto all as per above here-in-before but 20 mm bore complete all as specified and directed.

S & F vitreous china wash basin, white, flat back of size 450mm x 300mm including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed.

S & F vitreous china squating pan ''Orissa pattern size 580 x 440mm white with integral foot rest (excluding, flushing cistern and flush pipe) squating pan including connection ''P'' trap and to flushing pipe complete.

S & F 10 ltrs capacity PVC low level flushing cistern including ball valve, bracket, inlet, outlet, overflow, PVC connection complete.

S & F repair 32mm dia waste coupling of PTMT (half or full threaded) minimum weight 32mm- 45gnms.

S&F in repairs vitreous china wash down water closet pan pedestal pattern white including fixing bolts and seat cover white for pedestal pan with flat bottom and cover and mild steel chromium plated hinging device (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair Vitreous China urinals, Fullstal type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S & F 110 mm dia bore PVC (SWR) pipe (Type 'B') single socketed in trenches/floors in any length with rubber ring joints complete all as specified and directed.

S & F 75 mm dia bore PVC (SWR) pipe (Type 'B') single socketed in trenches/floors in any length with rubber ring joints complete all as specified and directed.

S&F in repair 75 mm dia PVC (SWR ) floor trap/ nahani trap,with grating plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR ) floor trap/ nahani trap with grating, plain with grating including jointing with solvent cement complete all as specified and directed.

M & L PVC gully traps square of size 125mm x 110mm including for setting and jointing to drain with CM 1:1 etc complete all as specified & directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair PVC waste pipe flexible 32mm or 40mm bore 60cm long for WHB & Sink complete all as specified and directed.

S & F in repair of 15 mm size stop/angle valve of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof covering complete all as specified.

S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified.

Anodised aluminium snap grid frame work for false ceiling all as specified.

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

12mm thick Perforated particle board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified. Make : (i) Aluminum section : VALCO, HINDALCO, JINDAL (ii) Gypsum board :- GYPSUM INDAI Ltd/LA GYP ECO Board.

all above item No. 91 Add if fixed in ceiling, flat or sloping complete all as specified and directed.

Material and labour for applying two coats of Acrylic weather coat emulsion paint on walls/ceiling/facias/ramp Surface etc in disruptive pattern having percentage of Six- colour as 29.04% of RGB Value (143, 152, 113), 22.48% of RGB Value (112,139,86), 14.98% of RGB value (123,137,126), 13.80% of RGB Value (84,97,75), 14.15% of RGB Value (123, 137, 94) and 5.55% of RGB Value (206,193,141) as per sample approved by AGE(I) for building of height upto 7.5 meter, over and including a coat of alkali resistance primer complete all as specified and directed. Note:- The rate quoted by contractor is demmed to include preparation of surfaces and necessary scaffolding for painting upto required height complete all as specified and directed.

M&L for one coat synthetic enamel paint old on steel surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed

M&L for two coat synthetic enamel paint over a coat red pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed

M&L for one coat synthetic enamel paint on old wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed

M&L Machine cut kota stone slabs flooring 20-25mm thick, as in riser and trades and the like set & jointed in neat cement slurry over & including screed bed over cement slurry screed 15mm thick in CM (1:4) incl rubbing and polishing, rounding or bullnosing the exposed edges complete all as specified and directed.

S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S & F aluminium anodised curtain rod of 20mm dia complete all as specified.

S & F complete brackets for curtain rod of 20mm dia fixed to wall as directed.

E/M PORTION

Supply & laying n repair GI pipes 50 mm dia, medium grade with all necessary fitting laid in trenches or with walls laid for replacement including taking out directed by EIC.

Supply & laying n repair GI pipes 40 mm dia, medium grade with all necessary fitting laid in trenches or with walls laid for replacement including taking out directed by EIC.

Supply & laying in repair GI pipes 25 mm dia, medium grade with all necessary fitting laid in trenches or with walls laid for replacement including taking out directed by EIC.

Supply & laying in repair GI pipes 20 mm dia, medium grade with all necessary fitting laid in trenches or with walls laid for replacement including taking out directed by EIC.

Supply and Fixed Gun metal globe /gate/stop valve (ISI marked) with iron wheel head screwed both ends for iron pipe of 50mm dia fixed in repair all as specified and directed by EIC

Supply and Fixed Gun metal globe /gate/stop valve (ISI marked) with iron wheel head screwed both ends for iron pipe of 40mm dia fixed in repair all as specified and directed by EIC

Supply and Fixed Gun metal globe /gate/stop valve (ISI marked) with iron wheel head screwed both ends for iron pipe of 25mm dia fixed in repair all as specified and directed by EIC

Supply and Fixed Gun metal globe /gate/stop valve (ISI marked) with iron wheel head screwed both ends for iron pipe of 20mm dia fixed in repair all as specified and directed by EIC

Drilling and tapping cast iron water mains ( in position ) for branch connections of the internal dia 20 mm including S&F brass ferrule for branch connection complete all as specified and directed.

Material and labour, rectification of leakage in CI/DI/GI pipe line size 80 to 150 mm dia bore including filling of lead/fittings as required cocking to the existing joint making the line serviceable and functioning complete all as specified and directed Note : The rate shall be deemed to be include excavation and earth work, returning, filling and removal of soil as required.

Material and labour, rectification of leakage in GI pipe line size 20 to 50 mm dia bore including any type fittings complete as required and making the line serviceable & functioning complete all as specified and directed Note : The rate shall be deemed to be include excavation and earth work, returning, filling and removal of soil as required.

Material and labour, taking out the existing defective 20 HP motor with submersible pumping set along with column pipe of any lowering from existing position after disconnecting the electric and water supply connection and strip opening the pumping set motor complete and taking out burnt winding from motor, rewinding the same with super enamelled copper wire of existing guage, varnishing, heating including insulation material and replacement of the worn insulaftion paper, realignment of rotor, adjustment of slots re-assembling the motor complete after repairing including lowering, fixing in position and connecting the electric cable and connection, testing complete all as specified and directed. Note : The quoted rate shall be deemed to include charges taking up/lowering pumping sets, transportation, hiring of T&P, testing and electric connection and material used for jointing the cable complete

Supply and fix,in replacement cast iron sluice valve 100 mm dia with flanged and drilled ends any pattern ISI marked, PN 1.0 class brass spindle, including joints and jointing materials bolts, nuts washers rubber gasket complete all as specified.

Cleaning of over head water tank of capacity 10000 Gallons at height up to 18 Mtr, by removing sludge, mud or any other foreign material from the bottom and internal surface by wire brushing, draining out the water in the tank and washing interally by using bleaching powder and applying two coats of lime washing and making the date of cleaning etc with fluorescent white paint on black background, material and labour complete all as specified and directed.

Material and labour, Painting to CI distribution pipes, Rising Main supply line, over flow, MS channel/railing and waste pipe with two coats of super synthetic enemalled paint at water supply installations, with pumping set pipes and OHT reservior tanks incoming, outgoing & over flow pipe and Supply line at pump house, with different colours complete all as specified and directed. Note : Capacity water tank 10000 Gallons

Servicing of DG Set 30 KVA of make Kirloskar including replacing of engine oil, changing of sump gasket with nuts bolts and check the all nuts bolts complete of engine and alternator alongwith replacement of defective parts, complete all as specified and directed. (Note: All parts make kirloskar) 30 KVA (a) S&F in replacement lube oil filter element complete all as specified and directed engineer –in-charge (b) S&F in replacement fuel filter element complete all as specified and directed engineer –in-charge (c) General servicing of DG set by opening of tappet cover/top cover tappet clearance setting with injector timing adjustment reffixing of tappet/top cover including replacement of tappet cover packing set, shellac/bostic tube all as directed. (d) S&F in replacement element air cleaner complete all as specified and directed engineer –in-charge (e) Tightining of all electrical connection AVR connection , alternator connection and Panel connections (f) Tightining of all the hoses , Fuel connection (g) Testing of Engine on load for 30 Minutes.

S&F fan belt set of DG set of existing size complete all as specified and directed engineer –in-charge

S&F in replacement head gasket of DG set complete.

Supply and fixing of battery 12 Volts, 150 AH suitable for DG Set complete all as specified and directed.Make: Exide,Amron.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised iron strip 25×4mm as earthing lead by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade ) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PT 1, 1991 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switche, DBs) complete all as specified & testing on completion.

Supply and fix, in replacement automatic star delta starter MU-G30H, relay range 28Amp to 42Amp in steel sheet metal enclosure for sumbersible pump including making electric and mechanical connections, complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed.

Material and labour, point wiring concealed type with PVC insulated (unsheathed) cable 1.5 Sqmm (Nominal area) multy stranded FRLS Copper conductor 1100 volts grade and continous earth wire PVC insulated 1.5 sqmm copper conductor to comman earth in and including new PVC conduit chasing and existing sunken boxes with new sunken boxes for piano switches/sockets & sheet and frame for pianoswitches/sockets (incl cutting chases & making good the disturbed surface ) complete all as specified and directed ny Engineer-in-charge for the following (Note :- Sunken boxes, frame, plate is included in the quoted rate)

(a) For one light/fan/bell point controlled by one 6 Amp one way switch complete all as specified and directed.

(b) All as per item No. 2 hereinbefore but wiring for one 3 pin 6 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed.

(c) All as per item No. 2 hereinbefore but wiring for one 3 pin socket outlet 6 amps independent board.

All as per item No 2 hereinbefore but with 2.5 Sqmm size cable multy stranded FRLS copper wire unsheathed for one 3 pin socket outlet 16 Amp on independent board including continous copper solid conductor connecting to comman earth dolly completed all as specified and directed ny Engineer-in-charge for the following - (Note :- Sunken boxes, frame, plate is included in the quoted rate)

S & F of switch piano flush type single pole one-way 6 Ampere complete all as specified and directed.

S & F of switch piano flush type single pole one-way 16 Ampere complete all as specified and directed.

S & F of 6 Ampere socket outlet flush type, multi purpose suitable for 2 and 3 pins (Total 5 Pins) complete all as specified and directed.

S & F of socket outlet two-in-one, 3 pin each suitable for 6 and 16 Ampere flush type with shuttered complete all as specified and directed.

S&F of lamp holder PVC / polycorbonate type insulated body with back plate suitable for batten fitting / angle fitting complete all as specified and directed.

Supply and fixing SMD LED panel recess/surface suspended mounting 36 watt 2' x 2' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ complete all as specified and directed.

Supply and fixing SMD LED panel recess/surface suspended mounting 36 watt 2' x 2' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts complete all as specified and dircted.

S & F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 ways including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and as directed including necessary brick work and plaster to match with the existing surface complete all as specified.

S & F MCB DP, 240 Volts, AC, B curve, 10 KA, 40 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed

S & F MCB single pole, 240 Volts, AC, B curve, 10 KA, 6 to 32 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed

M & L for vertical type sheet steel enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar of suitable size and PVC insulated copper jumpers from the MCCB to the out going circuits (one incoming MCCB and 12 outgoing MCBs circuits) comprising of 3 phase 4 wire of suitable rating including MCCB 160 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. and 12 Nos MCBs 6-32 Amps, complete all as specified and directed.

Supply and fix sheet metal encloser single pole and meutral , with two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

M& L , Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drwn in and including non metalic PVC regid conduit medium grade of suitable size with all standared fitting , concealed , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , complete all as specified and directed.

Supply , laying jointing and commissioning, LT under gound cables XLPE insulated screened PVC bedded galvanized steel strip armoured electric powder cable (heavy duty) with alumininum conductor cross sectional are 25 Sqmm 4 core LT, 1100 volts grade , laid in trenches , along poles or passing with through pipe or laid under floor or through/ on walls etc, complete all as specified and directed.

M&L sand cushioning with a layer of dry river sand 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts. Complete all as specified and directed Note: Punned down thickness (overall 18cm), shall be considered for measurement and payment.

M&L, locally available , sub class 'B' bricks (old size) laid flat and dry in trenches over the cable for protectionprependicular to the direction of cable adjacent to each other complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.5 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade GI pipe,funnel,wire mesh. Concrete 1:3:6 type C-1 for pit and RCC pit cover. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate.Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm complete all as specified.

Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.

B S TRADERS

AAR KAY BEE ENTERPRISES