Construction of Toilet at Swachh Gruha kalika kendra in Haveri city

Construction of Toilet at Swachh Gruha kalika kendra in Haveri city

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings bridges and such simillar works in all kinds of soils, as per d...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite trap basalt crushed raded coarse aggregates and fine aggregates as per relevant I...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1 6 12 1 cement 6 coarse sand 12 graded stone aggregate 20 mm nominal size u...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works super structure works of bridges upto 3.50 m height. The...

Form Work As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate For Plinth beams of Buildings 50 PWD S.R. 2023...

Form Work As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate RCC Beams, Lintels Troughs of Aqueducts 60 ...

Form Work As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate RCC Roof Slabs 50 PWD S.R. 2023-24 Volume 1 ...

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, ty...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1 6 1 cement 6 coarse sand...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1 3 1 cement 3 coarse sand in...

Filling available excavated earth excluding rock in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant ...

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS 15622 thickness to be specified by the manufacturer of approved make in all colours, shades except burgundy, bottle g...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 thickness to be specified by the manufacturer , of approved make, in all colours, shades except burgundy, bottle gr...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing fixing of louvered ventilator made out of multi chambered UPVC Matching to RAL-9016 sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPE Thermo Plastic Elastomer and lead...

Providing 20 mm cement plaster of mix 1 6 1 cement 6 fine sand to brick stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...

Providing 12 mm cement plaster with cement mortar 1 6 1 cement 6 fine sand including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two coats applied on walls 1.25 ltr 10 m² over and including one coat...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied 0.90L 10 m² over an under coat of primer applied 0.80 L 10 sqm of approved brand and manufacture incl...

Providing fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top bottom rails, covered with heat ...

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below tolerance 1mm , with wall thickness 2.0 mm 0.2 mm , corners of the door frame ...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 3 6 of 20mm and down size grani...

Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g Vol 2 P.NO.118 I.No 13.17.1 PWD S.R. 2023-24

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g Vol 2 P.NO.121 I.No 13.24 PWD S.R. 2023-24

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 30cm length Vol 2 P.NO.119 I.No 13.27.1 PWD S.R. 202...

Supply and delivery at site special moulded variety PVC elbows as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 63 mm dia PVC Elbows VOL-5 PWD S.R. 2...

Supply and delivery at site special moulded variety PVC bend as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments 63 mm dia PVC BEND VOL-5 PWD S.R. 2021-...

Providing and fixing chlorinated polyvinyl chloride cpvc pipes, having thermal stability for hot cold water supply,including all cpvc plain brass threaded fittting.i c fixing the pipe with c...

Providing and fixing chlorinated polyvinyl chloride cpvc pipes, having thermal stability for hot cold water supply,including all cpvc plain brass threaded fittting. this includes jointing of ...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak ...

Providing and fixing on wall face unplasticised rigid pvc rain water pipes conferming to IS 13592 type A, including jointing with seal ring conferming to IS 5382, leaving 10mm gap for thermal expansio...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1 4 1 cement 4 coarse sand C.I. cover with frame light duty 600X850 mm interna...

Providing Placing on terrace at all floor levels polyethylene water storage tank , IS marked , with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overfl...