Construction of Proposed Judicial Block (Phase-II) on existing Litigant Hall in Mini Sectt. at Rohtak (Providing 315 KVA Additional Transformer only).

Amount

24.1 Earthing and Lightening Arrestor

24.1.4 Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) etc. complete as required.

24.1.9 Providing and fixing 25mm x 5mm copper strip in 40 mm dia G.I. pipe from earth electrode as required.

24.1.10 Providing and fixing 25mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material.

24.1.5 Extra for charcoal or coke and salt for G.I. Plate or Copper plate earth electrode

24.3 HT Cable

24.3 Suppling and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required

24.3.3 70 sqmm to 120 sqmm

24.3.4 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required

24.3.4.1 70 sqmm to 120 sqmm

M. R. Items

Main LT Panel -1

Incoming Feeder Transformer -1 & 2 :-02Nos.

630A 4P MDO ACB 50KA With Thermal Magnetic Release For {O/C, S/C } Protection, 4NO+4NC Aux. Contacts, Micro Switch.

Under Voltage Coil 240VAC

Under & Over Voltage Relay (ANSI -27,59)

Digital Ammeter 600/5, Class-1.0, 96X96 Sqmm

Digital Volmeter 0-500, Class-1.0, 96X96 Sqmm

CTs 600/5A, Class-1, 15VA {CMCT} For Metering

Auxiliary Contactor 2NO+2NC Contacts, Aux.Supply - 230Vac

Addon Block 2No + 2Nc

ON/OFF/TRIP Indicating Lamps (LED TYPE)

R/Y/B Phase Indicating Lamps (LED TYPE)

Ex- Fan With Filter 240Vac

6A, SP, MCB, 10KA For Control Ckt.

6A Neutral Link Dropout Type, For Control Ckt.

Buscoupler -1

630A 4P MDO ACB 50KA With Thermal Magnetic Release For {O/C, S/C } Protection, 4NO+4NC Aux. Contacts, Micro Switch.

Under Voltage Coil 240VAC

Auxiliary Contactor 2NO+2NC Contacts, Aux.Supply - 230Vac

Addon Block 2No + 2Nc

ON/OFF/TRIP Indicating Lamps (LED TYPE)

6A, SP, MCB, 10KA For Control Ckt.

6A Neutral Link Dropout Type, For Control Ckt.

Outgoing Feeder Bus Section -1

APFC PANEL 105 KVAR .

200A 3P+NL MCCB 25KA With TMR For {O/C, S/C}

Protection,

Spreader Terminal

Extended Rotary Handle

Digital Amp Meter , Class-1.0, 96X96 Sqmm

CTs 200/5A, Class-1.0, 15VA {CMCT} For Metering

8 Stage APFCR Relay, Sensing 415Vac, Built-in PF Meter, CTR -/5A, 96 Sq Mm Aux, Supply 220Vac

Exhaust Fan 220Vac,

6A, SP, MCB, 10KA For Control Ckt.

6A Neutral Link Dropout Type, For Control Ckt.

5 KVAR Capacitor Banks :- 02 No's

MCB 16A,TP 10KA 'D' Curve

Power Contactor 18A,TP 240Vac.

Addon Block 1No+1NC

5 KVAR Capacitor Bank MPP (Normal Duty)

ON-Off Indicating Lamps (LED TYPE)

Start Stop Push Button

10 KVAR Capacitor Banks :- 02No's

MCB 32A,TP 10KA 'D' Curve

Power Contactor 25A,TP 240Vac.

Addon Block 1No+1NC

10 KVAR Capacitor Bank MPP (Normal Duty) 440Vac

ON-Off Indicating Lamps (LED TYPE)

Start Stop Push Button

25 KVAR Capacitor Banks :- 03 No's

MCB 63A,TP 10KA 'D' Curve

Capacitor Duty Contactor 25 KVAR 240Vac.

Addon Block 1No+1NC

25 KVAR Capacitor Bank MPP (Normal Duty) 440Vac

ON-Off Indicating Lamps (LED TYPE)

Start Stop Push Button

Outgoing Feeder -02Nos.

400A 4P MCCB 50KA With Thermal Magnetic Release For {O/C, S/C}Protection,

Spreader Terminal

Extended Rotary Handle

Outgoing Feeder -02 Nos.

250A 4P MCCB 50KA With Thermal Magnetic Release For {O/C, S/C}Protection,

Spreader Terminal

Extended Rotary Handle

Outgoing Feeder Bus Section -2

APFC PANEL 80 KVAR .

160A 3P+NL MCCB 25KA With TMR For {O/C, S/C}

Protection,

Spreader Terminal

Extended Rotary Handle

Digital Amp Meter , Class-1.0, 96X96 Sqmm

CTs 200/5A, Class-1.0, 15VA {CMCT} For Metering

8 Stage APFCR Relay, Sensing 415Vac, Built-in PF Meter, CTR -/5A, 96 Sq Mm Aux, Supply 220Vac

Exhaust Fan 220Vac,

6A, SP, MCB, 10KA For Control Ckt.

6A Neutral Link Dropout Type, For Control Ckt.

5 KVAR Capacitor Banks :- 02 No's

MCB 16A,TP 10KA 'D' Curve

Power Contactor 18A,TP 240Vac.

Addon Block 1No+1NC

5 KVAR Capacitor Bank MPP (Normal Duty) 440Vac

ON-Off Indicating Lamps (LED TYPE)

Start Stop Push Button

10 KVAR Capacitor Banks :- 02No's

MCB 32A,TP 10KA 'D' Curve

Power Contactor 25A,TP 240Vac.

Addon Block 1No+1NC

10 KVAR Capacitor Bank MPP (Normal Duty) 440Vac

ON-Off Indicating Lamps (LED TYPE)

Start Stop Push Button

25 KVAR Capacitor Banks :- 02 No's

MCB 63A,TP 10KA 'D' Curve

Capacitor Duty Contactor 25 KVAR 240Vac.

Addon Block 1No+1NC

25 KVAR Capacitor Bank MPP (Normal Duty) 440Vac

ON-Off Indicating Lamps (LED TYPE)

Start Stop Push Button

Outgoing Feeder -02Nos.

400A 4P MCCB 50KA With Thermal Magnetic Release For {O/C, S/C}Protection,

Spreader Terminal

Extended Rotary Handle

Outgoing Feeder -01Nos.

250A 4P MCCB 50KA With Thermal Magnetic Release For {O/C, S/C}Protection,

Spreader Terminal

Extended Rotary Handle

Outgoing Feeder -02Nos.

100A 4P MCCB 25KA With Thermal Magnetic Release For {O/C, S/C}Protection,

Spreader Terminal

Extended Rotary Handle

Outgoing Feeder -04Nos.

63A 4P MCCB 25KA With Thermal Magnetic Release For {O/C, S/C}Protection,

Spreader Terminal

Extended Rotary Handle

BUSBAR - Main Bus Bar

TPN Copper busbar made from Electrical Grade

Copper flats (E-91-E) 600 AMP Duly supported

on DMC insulators & covered with heat shrinkable sleeves.

Enclosure, Bus Bar & Wiring & Accessories

MS Cabinet with integrated Base Frame & Powder Coated Paint

Hardware and Accessories - Nuts, Bolts, Washers

Door Hinges and Locks, Neoprene Rubber Gaskets.

Mounting Plates, MS Channels, Partitions, Lifting Hooks & Gland Plates.

PVC Wires, Ferrules Thimbles & Other Wiring Accessories.

Consumables, Design and Development, Drawings

Manufacturing Cost i.e. Fabrication, Painting,

Bus Bar

fitting, Handling & fitting of switchgears.

NS-2 Supply, erection, testing & Commissioning of 11 KV VCB panel having air insulated, bus bar extensible type chamber complete with a set (one No. incoming & 2 No. outgoing) of 3 wires 800 Amp. copper bus bar as per specifications given below upto the the entire satisfaction of Engineer-in-charge of work.

11 KV VCB PANEL 1 INCOMING & 2 OUTGOING FEEDER

11 KV ,630A,TP EDO , 26.3 KA Vaccum Circuit Braicker with Follwing Accessories

Spring Charge Motor 110Vac

Shunt Trip Coil 24 Vdc

Closing Coil 24 Vdc.

Auc Contact 3 No + 3 Nc

Manual Operation Counter

Safety Shutter

Machenical On -Off Push Button

Machenical On -Off Indication 24Vdc.

Manual Spring Charge Handel.

Breaker Control Switch, 16A 2 Pole, 2 Way With Off

3 Phase Microprocessor Based Feeder Protection Relay (ANSI 50+50N,51+51N,86,95) with RS-485

Digital Ammeter Meter , Class-1.0, 96X96 Sqmm

Digital Volmeter Meter , Class-1.0, 96X96 Sqmm

Current Transformer Dual Ratio Dual Core WPL Type Core -1 :- 100/5 ,CL 0.2,5VA for Metering

Core -2 :- 50/5 ,CL 5P10,15VA for Protection

Pptential Transformer Dual Core Resin Cast Fixed Type with Fuse Ratio :- 11kV/r3/110V/r3 , 100VA

Auxiliary Contactor 2NO+2NC Contacts, 24Vdc

ON/OFF/TRIP Indicating Lamps (LED TYPE)

R/Y/B Phase Indicating Lamps (LED TYPE)

Emergency Mashroom Head Push Butoon

6A, SP, MCB, 10KA For Control Ckt.

20A, DP, MCB, 10KA For Control Ckt.

6A, DP, MCB, 10KA For Control Ckt.

Space Heater 80 Watt 230Volt AC

Thermostate 30-85°C Single Change over

Combined Box 20A single Phase

Panel Illumination Light with Door Limit Switch

6A Neutral Link Dropout Type, For Control Ckt.

Outgoing Feeder :- 02Nos.

11 KV ,1250A,TP EDO , 26.3 KA Vaccum Circuit Braicker with Follwing Accessories

Spring Charge Motor 100Vac

Shunt Trip Coil 24 Vdc

Closing Coil 24 Vdc.

Auc Contact 3 No + 3 Nc

Manual Operation Counter

Safety Shutter

Machenical On -Off Push Button

Machenical On -Off Indication 24Vdc.

Manual Spring Charge Handel.

Breaker Control Switch, 16A 2 Pole, 2 Way With Off

3 Phase Microprocessor Based Feeder Protection Relay (ANSI 50+50N,51+51N,86,95) with RS-485

Digital Ammeter Meter , Class-1.0, 96X96 Sqmm

Current Transformer Dual Ratio Dual Core WPL Type Core -1 :- 40/5 ,CL 0.2,5VA for Metering

Core -2 :- 20/5 ,CL 5P10,15VA for Protection

Auxiliary Contactor 2NO+2NC Contacts, 24Vdc

ON/OFF/TRIP Indicating Lamps (LED TYPE)

6A, SP, MCB, 10KA For Control Ckt.

20A, DP, MCB, 10KA For Control Ckt.

6A, DP, MCB, 10KA For Control Ckt.

Space Heater 80 Watt 230Volt AC

Thermostate 30-85°C Single Change over

Combined Box 20A single Phase

Panel Illumination Light with Door Limit Switch

6A Neutral Link Dropout Type, For Control Ckt.

BUSBAR - Main Bus Bar

TPN Aluminium busbar made from Electrical Grade

Aluminium flats (E-91-E) 800 AMP Duly supported

on DMC insulators & covered with heat shrinkable sleeves.

Enclosure, Bus Bar & Wiring & Accessories

MS Cabinet with integrated Base Frame & Powder Coated Paint

Hardware and Accessories - Nuts, Bolts, Washers

Door Hinges and Locks, Neoprene Rubber Gaskets.

Mounting Plates, MS Channels, Partitions, Lifting Hooks & Gland Plates.

PVC Wires, Ferrules Thimbles & Other Wiring Accessories.

Consumables, Design and Development, Drawings

Manufacturing Cost i.e. Fabrication, Painting, Bus Bar

fitting, Handling & fitting of switchgears.

NS-3 Supply & erection of XLPE (E) 11 KV HT alluminium armoured cable ISI marked in existing pipe/trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of engineer in charge of the work.

i) 70 sqmm 3 core XLPE cable

NS-4 Supply, erection, testing and commissioning of indoor type copper wound, transformer of 315 KVA 11 / 433 KV, 3 Phase, 50 Hz complete in all respect upto the entire satisfaction of Engineer-in-charge of work ( on existing pole / plateform including first filling of oil conforming to IS 1180 Part-II) Make : Alstom, Bharat Bijlee, Kirloskar, Crompton, NGEF and Volt amp.

No. load voltage ratio 11/ 433 KV

No. of Phase 3

Frequency cycles 50 Hz

Types Double wound core type Copper wound.

Cooling ONAN

Duty Outdoor

Vector Group ISS-DYN 11 / IS 2026 /77

Tapping on HV compensation +5% to - 5% Insteps of 2.5%

Temperature rise (Oil / res.00) 500 / 550 C

Attitude upto 1000 m above MSL

Off circuit tape changer

Externally hand operated

Oil conservator with filling hole & cap

Plain oil level gauge with minimum level marking

Thermometer pocket

4 Nos. Plain roller undirectional.

2 Nos. 4" dial type thermometer

Silica Gel breather

Ist filling of oil.

Drain cum filter valve with plug.

Rating & diagram plate.

Two earthing terminals

Lifting arrangement

Explosion vent

Air release plug.

Oil conservator tank

Shunt off valve between buchloz & conservator

TERMINATION

HV-3 Pole single glands cable box suitable for reception of one No. 3 core upto 120 sqmm HT XLPE cable including compound for filling the cable end box with copper lugs / thimble.

LV- 4 Pole 3 glands cable boxes suitable for 3 Nos. 240 sqmm 3.5 core Polyvinyl chloride cable having extended copper bars of requisite Capacity from LT bushing for making connections with cable including cost of copper lugs, thimbles LV : Neutral suitable cable Box for earthing provided.

NS-5 Supply, erection, testing & commissioning of 11 KV indoor H.T. Metering panel complete with CTs, PTs cubical and electronics meter with accuracy class 0.5 as per requirement / approved by HVPN Consisting of the following :

i) Cubical panel free standing floor mounting type made of sheet steel 14-G SWG CRCA sheet with channel iron base frame spray paintd with strong Synthetic grey channel paint as per size & design approved by HVPN

ii) 3 Nos. 11 KV CTs of rating as approved by HVPN for indoor installation of approved make of HVPN.

iii) One No. 11 KV PT 11000/110 Volts 10 KA burden 0.5 accuracy oil filled suitable for indoor installation of approved make of HVPN.

iv) Digital electronic meter 3 Phase 4 wires 0.5 accuracy for recording reading operating system for difference kind of readings. The cubical panel will be complete in all respect including interconnection, internal wiring with PVC copper cable its testing and approved of all items by HVPN including cost of all testing/approved charges of all items of HVPN including cost of all labour & material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge ofthe work.

NS-6 Supply and erection of Fire extinguisher ISI mark Co2 type of 4.5 Kg. capacity as per IS 7285 duly erected / hung on wall with hooks with all labour & petty material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

NS-7 Supply & Erection of MS Bucket Stand made of 32 x 5 mm angle iron / channel iron suitable for 6 Nos. fire bucket including cost of 6 Nos. bucket, welding & painting of complete stand with one coat of red oxide and two coats of approved paint of red color with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work.

NS-8 Supply and erection of Rubber Mat of size 2m x 1 m x 12 mm thick suitable for 11 KV complete in all respect make & model approved by Chief Electrical Inspector.

NS-9 S/E of 11 KV gang operated switch 'Jayshree make' conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing 'H' pole fixed with angle of size 50x50x6mm, suitable size of MS clamp, nuts & bolts including cost of 6 Nos. 11 KV insulator with GI Pin, RD fuses and painting with 2 coats of approved paint and one coat of red oxide material required to complete the job in all respect utpo the entire satisfaction of Engineer-in-charge of work.

NS-10 Supply & erection of lightening Arrestor Model SDU ALPRO make suitable for 11 KV 3 Phase 50 Hz grounded neutral system comprising of Speek gap type (Quench gap type) in series with non liner resister element housesed in horizontally Scale porcelain bushing with line and ground terminal along with mounting clamps Conforming to ISS 3070 (Part-1) of 1985 with latest amendment with all labour and material required to complete the job in all respect utpo the entire satisfaction of Engineer-in-charge of work.

NS-11 Providing and fixing of stay set complete with stay wire with dis insulator as per specification upto the entire satisfaction of Engineer-in-charge of work

NS-12 Providing and fixing of wire mesh jali around the transformer of size 4'x 8' made out of 75 x 25 x 3.25 mm jali fixed with angle iron frame made out of M.S. angle 50 x 50 x 6 mm support of M.S. flat 50 x 6 mm and fixed in C.C. Block 1:2:4 including cutting, welding etc. as per drawing complete in all respect upto the entire satisfaction of the Engineer-in-Charge.

NS-13 Erection of MS Angle 50 x 50 x 6 mm, M.S. flat & nuts & bolts including cutting, bending to the required shape drilling holding carriage, painting loading & unloading complete in all respect.

Highlight Associates and Contractors

Janta Electric Store

Balraj Singh Contractor

S.S. Enterprises