Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.2 LAccepted-AOC 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | L1 | Accepted-AOC Lowest | |
| 2 | L2₹12.2 L+₹1.0 L (8.98%)Rejected-Finance 65 DEEP NAGAR BIRRING ROAD JALANDHAR CANTT PB | L2 | Rejected-Finance L2 | |
| 3 | L3₹12.4 L+₹1.2 L (10.9%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹12.8 L+₹1.7 L (14.8%)Rejected-Finance 239 PHASE 2 MODEL TOWN BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance L4 | |
| 5 | L5₹14.9 L+₹3.8 L (33.6%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹15.3 L
EMD Value
₹30,660
Closing Date
30 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
ADDITION/ ALTERATION OF AREA ACCOUNT OFFICE AND CERTAIN OTHER DEPOSIT WORK UNDER GE (EAST) JALANDHAR CANTT
2022_MES_529889_1
GE/JULL/ET-21/2022-23
Open Tender
Civil Works
Item Rate
183 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹30,660
Yes
17 Aug 2022
9 Jun 2022
4 Aug 2022
9 Jun 2022
30 Jul 2022
18 Jul 2022
Amount
Excavation in trenches in soft/loose soil , n exc 1.5m wide and n exc 1.5m in depth and getting out complete all as specified and directed.
Excavation in trenches in soft /loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.
Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed.
Returning, filling in including leveling, watering and well ramming in layers n. exc. 25 cm thick each layer complete all as specified and directed.
Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.
Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.
Dismantling of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc. 1.5 Sqm each door/ window complete all as specified and directed.
Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
All as per item No 10.00 but in skirting, dado & vertical surface over and including 10mm thick screed in cement mortar (1:4) on wall, finished even and rough to receive the top layer as specified.
Material and labour for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub base, hard standing, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified & directed.
Material and labour for 80mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-40 grade, with grey cement and pigment, laid in floor/ path/ hard standing in any pattern as approved, laid over sand and including 30mm thick sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed. Note : The sample shall be got approved from the GE before build procurement and lots shall be tested independently by the GE.
Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed.
Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular in rough finished surfaces of concrete complete all as specified
Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200mm thick (Horizontal or sloping) for flat & rough finished surfaces of concrete complete all as specified and directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete complete all as specified and directed.
Material and labour reinforced cement concrete nominal mix in (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in foundation, rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Material and labour reinforced cement concrete nominal mix in (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in columns, pillar, piers, posts and struts concrete complete all as specified and directed.
Material and labour reinforced cement concrete nominal mix in (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m span complete all as specified and directed.
Material and labour reinforced cement concrete nominal mix in (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material and labour for MS TMT bars 10 mm and over dia and cut to length, bent to shape required including cranking bending spirally for hooping for clos hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed
All as per Srl item No 24.00 but 5mm dia and over upto and including 10mm dia inserting, spacers and binders
Material and labour mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Material and labour for powder coated aluminium anodised door shutter having 150mm x 44mm x 2.85mm thick bottom rail, 150mm x 44mm x 2.85mm thick middle rail 100mm x 44mm x 3mm thick stile and top rail including necessary fittings joinery cleat, glazing packing snap beading 10mm x 10mm, anodised aluminium handle 200mm long (02 No), 3 No 100mm size chromium plated butt hinges, 2 No 200mm size aluminium tower bolt and aluminium body hydraulically door closer, designation No-3, universal type, weight between 61 to 80 kg etc including frame of section 100mm x 44mm x 3mm and door shutter, bottom portion covered with 9 mm thick pre-laminated particle board, interior grade, pre-laminated on both sided with decorative choice lamination (colour/design approved by Engineer-in-charge) fixed to aluminium frame work and top portion covered with 5.0mm thick float glass and pattern. One mortice lock (Make: Harrison) with shutter and fixing complete all as specified and directed.
Material and labour for anodised aluminium window/ ventilator shutter side hung having 75mm x 44mm x 2.85mm thick stile bottom rail an top rail including necessary fitting joinery cleat glaring packing snap beading 10mm x 10mm, 2 Nos of anodised aluminium handle 150mm size, 2 No chromium plated bott hinges 75mm size and 2 No 100mm long aluminium tower bolt etc including frame of section 100mm x 44mm x 3mm and including 5mm thick float glass and fixing complete all as specified & directed.
Material and labour brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar (1:6) on fair faces of brick wall or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified
Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick wall or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified
Material and labour for 10mm thick in cement mortar (1:4) on brick or concrete wall surface for receiving granite finished rough cement complete all as specified
Material and labour for preparation of new plastered or un-plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
Material and labour for preparation of old decorated surfaces of walls including, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greasing spots etc and applying two coats of exterior weather coat emulsion coloured complete all as manufacturer’s instructions and directed.
Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
Material and labour for 150mm bore RCC pipe (ISI Marked), class NP3, laid and jointed in cement mortar with collars, laid in trenches at any depth and tested complete all as specified and directed.
Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling, post hole, mass concrete, surface channel and drains and other similar work etc complete all as specified and directed.
Material and labour for RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in landings, cover slab (fro manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.
Material and labour for approved earth filling including spread and levelled in layers not exc 25 mm thick watering and rammed to a true surface complete all as specified.
Material and labour for Granite (of any type) work 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, hand wash places and like including necessary cutting and grooving to walls and making good including 15mm thick in cement mortar (1:6) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.
NIRMAL SINGH
Motorway Constructions
SARASWATI CONSTRUCTION CO
JAGDISH KUMAR SEHGAL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .