REPAIR MAINTENANCE OF TEMP ACCN VIZ BARRACKS AND SHEDS UNDER AGE BR II UNDER GE (NW) NOFRA

Amount

Note : 1. The tenderer shall note that before quoting his unit rate, all items of works shall be including provision of necessary scaffolding & safety measures. (a) Functional tools & plants shall be carried by tradesman all time for attending any site. (b) Necessary ladder / cloth or any other material reqd. (c) Debris / site clearance immediately before leaving site. (d) Safety eqpt to be carried all time. (e) Scaffolding wherever reqd deemed to be included in quoted rates. (f) A team will consist of 02 person will daily report to JE/AGE (g) Reduction of team can be done only with written permission of concern AGE. (h) In case of non-adherence of any of above fine/ penalty to be carried as under:- (i) 1st Time - Rs 200/- (ii) 2nd Time - Rs 500/- (iii) 3rd Time - Warning to contractor. (j) In case of 3 warning to contractor, it will be reflected in WLR for slow progress.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S& F for Framed work such as grills, gratings, angle iron, posts, pipe sections, railings etc. with ends of bars shouldered and/or riveted, or forged into spikes; door shutters with gusset plates, braces, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and similar work conforming to Fe.290.Gde-E-165 at any height including necessary scaffolding complete all as specified and as directed.

S&F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified.

M&L for 1.25 mm thick mild steel, plain, black sheet as in steel door shutters cut to size and welding to angle iron framework including taking down steel door shutters complete all as specified.

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified incl all necessary scaffolding etc.

M&L for preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified incl all necessary scaffolding etc.

S & F in repair for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including taking down old sheet of any description/ size complete all as specified and directed.

S&F in repair for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, including taking down old sheet of any description/ size complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in subbase, foundations, filling and mass concrete, complete all as specified.

M&L for 80 mm thick interlocking paver block machine pressed of any size and shape as approved by GE incl 50mm sand cushion and demolition of old paver blocks and removal to store.

Dismantling of old interlocking tiles carefully and Refixing in same location interlocking paver tiles any thickness and M&L for 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction, complete all as specified and directed.

M&L for cleaning of PCC paver block, chequred tiles and any type of PCC flooring by water spray and apply one coat of floor paint suitable for floor by using brush/ roller, complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in copings, bed blocks, bed plates, fixing of posts etc all as specified.

Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified.

M&L for granite stone slab 20mm thick (table rubbed and polished) in steps, jambs, pillar, window cills, cooking platform and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture pigment to match with shade of granite including moulding at front edge all as specified and as directed as in platforms complete all as specified and directed.

M&L, for machine cut kota stone slab flooring 20-25mm thick over cement screed bed in CM (1:6) 15mm thick, & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land.

M&L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm including over 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm but as on vertical surfaces such as skirting /dado including 10mm thick backing layer of CM 1:4 for laying floor finishes on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 15 to 20mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Supply and fix as in repairs false ceiling with powder coated exposed GI grip suspension system (E-grip T-2430 or equivalent load carrying capacity with mid span deflection not exceeding. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross tee 1200mm/600mm long wall angle. The main runners to be placed @ 1200mm, the cross tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm from a modular grid of 1200mm x 600m. Additional cross tees of 600mm shall be placed perpedicular to the cross tee 1200mm long to finally form a grip of 600mm x 600mm. Grip of modular size 600mm x 600mm shall be supported by 6mm dia GI wire from purlins / soffit with and including 6mm thick high pressure steam cured non asbestos fiber and fixed as in repairs complete all as specified and as directed.

S&F roof tiles, Mangalore pattern, interlocking at side joints, laid dry including dismatling of old tiles.

M&L for preparation of old wall surfaces and applying two coats of oil emulsion distemper complete all as specified and directed.

M&L preparation of old distempered surfaces of walls and applying one coat of oil emulsion distemper on walls etc all as specified.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)

Taking down chowkats or frames exc 1.5 sqm but n.exc 4.00 sqm each but with shutters (without taking off shutters from the frame)

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each

S&F 35mm thick 2nd class HW rail & stile plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated

S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood complete all as specified and directed.

M&L for preparation of newly wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified and directed.

S&F powder coated (colour of coating as directed) aluminium (minimum 25 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.

S&F butt hinges 100 mm mild steel hinges medium weight and fixed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane all as directed.

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples incl wooden beading all as specified and directed.

S&F 15 mm dia GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers , clips ,including taking down existing GI water tubing complete with all fittings of 15 mm bore, complete all as specified.

S&F 20 mm dia GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers , clips, including taking down existing GI water tubing complete with all fittings of 20 mm bore, complete all as specified.

Taking down & Refixing 15mm old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as specified.

Taking down & Refixing 20mm old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as specified.

S&F 20mm bore of CPVC pipes having thermal stability for hot & cold water supply including all plain and brass threded fittings fixed of required sizes including with all fittings and fixed to wall /ceilings with suitable clamps, laid in floor or concealed of 20mm size and incl. taking down old tubes of any desc. complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan white (pedestal pattern) including plastic sheet cover with nuts and bolts etc all as specified and directed.

S&F in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).

S&F in replacement vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and pillar tap 15mm bore dia fancy type complete all as specified and directed.

S&F in replacement 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe complete all as specified and directed.

S&F in repairs fancy type CP bib cock 15 mm bore complete all as specified and directed.

S&F in repairs fancy type CP Pillar taps 15 mm bore all as specified and directed.

S&F in repairs CP angular stop cock 15 mm bore all as specified and directed.

Demolition of brick work/ stone masonary built cement mortar .

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone walls and ceiling including racking of joints hacking for key scrubbing down with water etc incl all necessary scaffolding etc.

M&L for 15mm thick plastering in cement & sand mortar 1:4 in mixed with water proofing compound on fair faces of brick work or stone masonary surfaces, finished even and smooth (w/o using extra cement) all as specified and directed (WPC shall be mesured and paid seperately) incl all necessary scaffolding etc complete.

M&L for 15mm thick plastering in cement & sand mortar 1:6 on fair faces of brick work or stone masonary surfaces, finished even and smooth (w/o using extra cement) all as specified and directed (WPC shall be mesured and paid seperately) incl all necessary scaffolding etc complete.

M&L for Preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion exterior grade (100%) over a coat of primer incl all necessary scaffolding etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1 to 2 mm thick wall care putty all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for Preparation of old decorated surfaces of walls and applying two coat of acrylic emulsion exterior grade (100%) over a coat of external primer incl all necessary scaffolding etc complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement and incl taking down of old steel of any specfication or size as specified and directed.

SN CONSTRUCTION (BID ID -3106058)

K.C.P ENTERPRISES (BID ID -3107242)

Bright Construction Co (BID ID -3109336)

GANGAJAL (BID ID -3121024)

Bob Enterprises (BID ID -3120741)