Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹5 L
Closing Date
6 Aug 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tata Power Delhi Distribution Limited
Rate Contract for Miscellaneous Civil Works in PAN TATA POWER-DDL
200001980
TPDDL/ENGG/ENQ/200001980/26-27
Delhi
1 The bidder must have executed cumulative orders equal to 56 Lacs and one single order of at least 17 Lacs in last 5 years. Order copy/ Completion certificate shall be submitted in this regard. 2 The bidder must have all Statutory Compliance like Valid PAN, ESI registration, EPF registration, GSTN Registration. Bidder must submit the copy of all these Registration certificates. 3 The bidder should have average annual turnover of Rs.56 Lacs in last three financial years. Balance Sheet, profit and loss account statement/ CA Certificate for turn over shall be submitted along with the bid
₹5,000
₹5 L
16 Jul 2026
16 Jul 2026
6 Aug 2026
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto1.5m, disposed soil to be leveled and neatly dressed a) for all kinds of soil
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth. Lead upto 50 m and lift upto 1.5 m;disposed earth to be leveled and neatly dressed for all kinds of soil.
Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. - All kinds of soil.
Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms,depth upto1.5m including getting out the excavated soil, and then returning the soil as required, in layes not exceeding 20cm in depth i/c consolidating each desposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed,within a lead of 50 m: All kinds of soil. Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.
Filling available excavated earth (excluding rock) trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming watering, lead up to 50 m and lift upto 1.5 m
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil.
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of soil
Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating ea deposited layer by ramming, watering etc, disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside of periphery of the area cleared.
Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
Supplying, diluting and injecting chemical emulsion PRE CONSTRUCTIONAL ANTI- termite treatment and creating a continuous chemical barrier under and all around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits etc. complete as per IS codes & specifications (plinth area of the building at ground floor only shall be measured for payment) a) Chlorphyriphos Emulsifiable concentrate 20% with 1% concentration Note : Contractor shall have to furnish from the specified agency carrying out the work under anti-termite treatment with a warranty card in favour of TPDDL for the satisfactory performance of the treatment for a period of three years (Chemical emulsion make- Bayer, Product name- Premise-SC/Agenda or equivalent make)
Supplying, diluting and injecting chemical emulsion POST CONSTRUCTIONAL ANTI-termite treatment creating a continuous chemical barrier i/c all the wood work, door frames, wooden cabinets, almirahs, wall mounted cabinets, work stations, wooden partitions etc. (floor area of the building only shall be measured for payment) a) Chlorphyriphos Emulsifiable concentrate 20% with 1% concentration Note : Contractor shall have to furnish from the specified agency carrying out the work under anti-termite treatment with a warranty card in favour of TPDDL for the satisfactory performance of the treatment for a period of three years (Chemical emulsion make- Bayer, Product name- Premise-SC/Agenda or equivalent make)
Cement mortar 1:3 (1 cement : 3 fine sand)
Cement mortar 1:4 (1 cement : 4 fine sand)
Cement mortar 1:6 (1 cement : 6 fine sand)
Cement mortar 1:3 (1 cement : 3 coarse sand)
Cement mortar 1:4 (1 cement : 4 coarse sand)
Cement mortar 1:5 (1 cement : 5 coarse sand)
Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level : 1:1.5:3 (1cement : 1.5 coarse sand (zone-III) :3 graded stone aggregate 20 mm nominal size.
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level: 1:2:4 (1cement : 2 coarse sand (zone-III) :4 graded stone aggregate 20mm nominal size
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level: 1:2:4 (1cement : 2 coarse sand (zone-III) :4 graded stone aggregate 40 mm nominal size.
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level: 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size )
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level: 1:4:8 (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size )
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level: 1:5:10 (1 cement : 5 coarse sand (zone-III) : 10 graded stone aggregate 40 mm nominal size )
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc. up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 cement: 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 12.5 mm nominal size).
Providing and laying damp-proof course 50 mm thick with cement concrete1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
Extra for providing and mixing water proofing material in cement concrete per 50 kg work in doses by weight of cement as per manufacturer’s specification. (Rate for per 50 kg bag of cement used in cement concrete)
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing with cement punning.
Providing and laying in position C.C in brick ballast in 1:6:12 (1 Cement : 6 Coarse Sand (zone-III): 12 Brick aggregate 40 mm nominal size) mix. All works up to plinth level
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level: 1:2:4 (1cement : 2 recycled stone dust :4 recycled concrete agg 20/10 mm nominal size). Note: Recycled material to be used and procured from C&D Waste Recycling Process Plants.
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level: 1:4:8 (1 cement : 4 recycled m sand : 8 recycled agg 20/40 mm nominal size ) Note: Recycled material to be used and procured from C&D Waste Recycling Process Plants.
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All work upto plinth level 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All work upto plinth level 1:2:4 (1cement : 2 coarse sand (zone-III) :4 graded stone aggregate 20 mm nominal size.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement: a) 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
Centring and shuttering including struttting ,propping etc.and removal of form for : Foundations , footings , bases of columns etc for mass concrete
Centring and shuttering including struttting , propping etc.and removal of form for : Walls (any thickness) including attached plaster, buttresses, plinth and string courses etc.
Centring and shuttering including struttting , propping etc.and removal of form for : Suspended floors , roofs , landings , balconies and access platform
Centring and shuttering including struttting , propping etc.and removal of form for : Shelves (Cast in situ)
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers
Centring and shuttering including struttting , propping etc.and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts.
Centring and shuttering including struttting ,propping etc.and removal of form for : Stairs, (excluding landings) except spiral-staircases.
Centring and shuttering including struttting,propping etc.and removal of form for : Arches, domes, vaults up to 6 m span.
Centring and shuttering including struttting,propping etc.and removal of form for : Weather shade, Chajjas, corbels etc., including edges
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size).
Encasing rolled steel sections, in beams and columns, with cement concrete 1:1.5:3 (1 cement :1.5 coarse sand (zone-III) :3 stone aggreegate 20 mm nominal size) including centring and shuttering complete but excluding cost of reinforcement.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars / Thermo-Mechanically Treated bars.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Cold twisted bars / Thermo-Mechanically Treated bars.
Providing, hoisting and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stoned aggregate 20mm nominal size) in Cable Trench covers / Lintels including cost of centering, shuttering and finishing with neat cement punning on top surfaces. (excluding reinforcement). (Transportation, loading, unloading and placing at desired locations/ trenches inclusive of all)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
Brickwork with Recycled CC Bricks of size 230x110x75 mm (M10 Grade) in foundation and plinth in :- (a) Cement Mortar 1:4 (1 cement : 4 coarse sand)
Brickwork with Recycled CC Bricks of size 230x110x75 mm (M10 Grade) in foundation and plinth in :- (a) Cement Mortar 1:6 (1 cement : 6 coarse sand)
Brickwork with Recycled CC Bricks of size 230x110x75 mm (M10 Grade) in superstructure above plinth level upto floor V level in all shapes and sizes :- (a) Cement Mortar 1:4 (1 cement : 4 coarse sand)
Brickwork with Recycled CC Bricks of size 230x110x75 mm (M10 Grade) in superstructure above plinth level upto floor V level in all shapes and sizes :- (a) Cement Mortar 1:6 (1 cement : 6 coarse sand)
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
Half Brick masonry with recycled CC bricks of size 230x110x75 mm (M10 Grade) in foundation and plinth : Cement mortar 1:3 (1 cement : 3 coarse sand)
Half Brick masonry with recycled CC bricks of size 230x110x75 mm (M10 Grade) in foundation and plinth : Cement mortar 1:4 (1 cement : 4 coarse sand)
Half Brick masonry with recycled CC bricks of size 230x110x75 mm (M10 Grade) in supersturcture above plinth level upto floor V level : Cement mortar 1:3 (1 cement : 3 coarse sand)
Half Brick masonry with recycled CC bricks of size 230x110x75 mm (M10 Grade) in supersturcture above plinth level upto floor V level : Cement mortar 1:4 (1 cement : 4 coarse sand)
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry
Providing and filling Brick bats of 40 mm nominal size under flooring etc. i/c compaction by ramming and levelling top surface complete.
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. a) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm.
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. a) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab over 0.50 sqm.
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab upto 0.50 sqm.
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels Granite of any colour and shade. Area of slab over 0.50 sqm.
Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work
Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Rubbing and grinding of existing terrazo/mosaic flooring i/c polishing complete at all floor levels
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Particle Board 12 mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows, partition frames with C.P. brass/ stainless stell screws etc. (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Particle Board 12 mm thick. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked.
Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). 12 mm thick.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (tower bolts, handles, locks, sliding door bolts to be paid seperately)
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) : Rectangular or square
Extra for cutting rebate in flush door shutter (total area of the shutter to be measured)
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x12 mm
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gage with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm. With 2nd class teak wood beading 62X19 mm.
Providing and fixing fly proof galvanised M.S. wire gauze to windows and clerestory windows using galvanised M.S. wire gage with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm. with 12 mm mild steel U beading.
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.(In case of welding , hire charges for welding set will be paid extra) 125x65x2.12 mm.,
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.(In case of welding , hire charges for welding set will be paid extra) 100x58x1.90 mm.
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.(In case of welding , hire charges for welding set will be paid extra) 75x47x1.70 mm.
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.(In case of welding , hire charges for welding set will be paid extra) 50x37x1.50 mm.
Providing M.S. Piano hinges ISI marked IS:3818, finished with nickel plating and fixing with necessary screws etc. complete. Overall width 35 mm.
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight from 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 50 mm
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper.
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) board conforming to IS: 2095: (part 3) : 1996 (Board with BIS certification marks)
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge.
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality. 1.0 mm thick
Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 300 x 19 x 1.9 mm
Providing and fixing lipping with second class teak wood 38x12mm thick on edges of door shutter using nails, adhessive etc. including french polishing complete. (Door area to be measured for payment).
P/F 6mm thick plywood to windows / openings including nails, screws, adhessive etc. complete.
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 250 mm
Providing and fixing stainless steel tower bolts with necessary screws etc. complete. 150 mm
Providing and fixing stainless steel tower bolts with necessary screws etc. complete. 200 mm
Providing and fixing stainless steel sliding door bolt with necessary screws etc. complete. 200 mm
Providing & fixing stainless steel Door stopper with necessary screws etc. complete. Twin rubber stopper.
Providing & fixing telescopic channel for key board drawer unit with necessary screws etc.
Providing and fixing stainless steel door handel with necessary screws etc. complete 150 mm
Providing & fixing PVC back rubber with necessary screws etc. complete. 50 mm
Providing and fixing ISI marked S.S Soft Closing hinges with necessary S.S screws etc complete. Up to 100mm
Providing and fixing 50 mm stainless steel cupboard lock of approved make including stainless steel screws etc. complete.
Extra for making grooves in high pressure laminate sheet (Sunmica) as per desired pattern
Structural steel work in single section, fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work including cutting, hoisting, fixing inposition and applying a priming coat of approved steel primer all complete
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x 2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles including applying a priming coat of approved steel primer.
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover
Providing and fixing ball bearing for rolling shutters.
Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes.
Steel work welded in built up sections/ framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete.
Steel work welded in built up sections/ framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in gratings frames guard bars, gates and similar works
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 10 x 120 mm
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. 10 x 160 mm
Providing and fixing IRC fabric (welded mesh) of size 25x75 mm to the frame of MS angles, channels, tees, flats etc. at all floor levels including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer as required. In frames, gates etc. (Weight not less than 6.40 Kg/m2). (Cost of MS frame will be paid separately). Fixed to steel frames by welding.
Extra for making pointed edges of square / round bars by heating, hammering etc complete.
Repairing and refixing of available RBT along the boundary wall / fencing on angle iron post with all necessary fitting such as welding of nuts, bolts, clips, TSP & labour etc.complete (Cost of angle iron post or any steel member shall be paid seperately)
Providing and fixing MS Chequered plate on top of Cable Trench including cutting to size, grinding of edges and applying a priming coat of approved steel primer etc. wherever required complete.
Providing and Fixing by welding MS sheet upto 2mm thickness /18 BG GI sheet to the frame of MS angles, tees etc including applying a priming coat of approved steel primer complete
Repairing of rolling shutter by replacing 27.5 CM long MS Springs (Two Nos) Grade 2 i/c dismantling and refixing, oiling and greasing of shutter complete.
Repairing of rolling shutter by replacing MS Pipe Shaft i/c dismantling and refixing, oiling and greasing the shutter complete.
Repairing of rolling shutter by replacing MS interlocking laths i/c dismantling and refixing, oiling and greasing the shutter complete.
Repairing of rolling shutter by replacing Top MS cover i/c dismantling and refixing, oiling and greasing the shutter complete.
Repairing of rolling shutter by replacing the Guide veins i/c dismantling and refixing, oiling and greasing the shutter complete.
Repairing of rolling shutter by oiling and greasing the internal moving parts and guiding veins and making it operational by making minor repairs etc. complete.
Providing and fixing stainless steel ( Grade 304) gate, grill, railing etc. made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the gate with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.)
Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar including filling the joints with same mortar with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand)
Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar including filling the joints with same mortar with common burnt clay non modular bricks: 1:6 (1cement : 6 coarse sand)
Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.
52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick hardcrete cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 stone aggregate 6 mm nominal size) by volume hardening compound is mixed @ 2 litre per 50 kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. 18 mm thick.
Providing and fixing glass strips in joints of terrazo/cement concrete floors. 40 mm wide and 4 mm thick.
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS: 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile.
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS: 4457, complete as per the direction of Engineer-in- Charge. In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). Acid and alkali resistant tile.
Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : Udaipur green marble
Kota stone slab ( 20 mm thick) flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 ( 1 cement : 4 coarse sand)
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
40mm thick fine dressed stone flooring over 20mm (average ) thick base of cement mortar 1:5 (1cement:5coarse sand) with joints finished flush. Red sand stone.
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 1200 mm
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make colours such as White, Ivory, Grey, Fume Red, Brown laid with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness including pointing the joints with white cement and matching pigment etc. complete.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all shades of 300x450mm size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Designer tiles (Basic cost Rs. 410 per sq m)
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all shades of 300x600mm size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Designer tiles (Basic cost Rs. 425 per sq m)
Hacking / chieseling of existing floor for fixing of floor tiles with cement based high polymer modified quick set tile adhesive i/c all T&P etc. complete.
P/F 10mm thick mirror polished black granite tile as flushed (recessed) skirting 100mm wide on brick masonry vertical wall with 12x12mm groove at its upper end neatly finished in POP punning complete in all respect
Extra for providing and fixing wind ties of 40x 6mm flat iron section
10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat: With common burnt clay F.P.S.(non modular) brick tile of class designation 10.
Providing gola 75 x 75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design: a) In 75x75mm deep chase
Making khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete
Providing and fixing M.S. holder bat clamps of approved design to C.I or S.C.I. rain water pipes embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. 100mm diaeter
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes confirming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes. 75 mm dia
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes confirming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes. 110 mm dia
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diaeter and weighing not less than 440 grams.
Providing and fixing double skin insulated precoated galvanized iron profile sheet (size, shape and pitch (175-250mm) and depth (20-30mm) of corrugation as approved by Engg.in Charge) 0.5mm (+0.05%) total coated thickness with zinc coating 120gms per sqm as per IS : 277, in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. The insulation shall be done with 50mm thick glass wool of density 48kg/cum density wrapped in polythene sheet sandwiched in between the two sheets and fixed complete. The inner and outer sheets will be separated with the help of GI-Z-girt. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in suitable length as desired by Engineer in- charge. The sheet shall be fixed using self drilling /self tapping GI coated screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing of 0.5mm th Zincalume steel sheet of 28mm deep profile flashing of same approved colour / specification as of profile sheet roofing item, fixed with self tapping screws etc. complete.
Providing and fixing single skin precoated galvanized iron profile sheet (size, shape and pitch (175-250mm) and depth (20-30mm) of corrugation as approved by Engg.in Charge) 0.5mm (+0.05%) total coated thickness with zinc coating 120gms per sqm as per IS : 277, in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in suitable length as desired by Engineer in- charge. The sheet shall be fixed using self drilling /self tapping GI coated screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.80mm (base metal of minimum 0.75mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Refixing of available profile sheet including dismantalling if required at any floor level with bracing on top with necessary self tapping screws, all T&P etc. complete
Providing and fixing fibre sheet of 2 to 2.5mm thickness inclusive of all fastners, nuts, bolts etc and inlcusive of labour complete
Providing and fixing gutters in 0.8mm thick colour coated Zincalume steel sheet of 280mm deep profile with necessary self tapping screws as required complete.
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes confirming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. a) single socketed pipes. including all fittings, clamps etc. 150 mm dia.
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long , G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: a) 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I.
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long , G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with: b) 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I.
Providing and fixing suspended Gypsum board ceiling (straight, vertical & curved) consisting of fixing GI perimeter channels of 27mm x0.5mm thick having one flange of 20mm and another flange of 30mm along with perimeter of the ceiling, screws fixed to RCC/ Brick/foam block walls/ gypsum board partitions with the help of rawl plugs and screws. The suspending GI Intermediate channels of size 45x0.55mm th. With two flanges of each from the soffit @1200mm centre with GI hangers of 25mm x 0.5mm thick Fixed to soffit with GI cleat and steel Expansion fasteners and to intermediate channel with GI nut and bolt. Ceiling section of 0.5mm thickness having knurled wedge of 51.5 mm and two flanges of 26mm each with lips of 10.5mm then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450mm centers, 12.5mm th. Tapered edge gypsum plaster board (confirming to IS 2095-1982) is then fixed with screws to ceiling section with 25mm dry screws at 230mm centers at the underside of ceiling section framing. Screws to be fixed mechanically either with screw driver or drilling machine with suitable attachment, providing angle beads and edging beads wherever necessary, finishing even appearance. P/f trap doors made of laminated boards with wooden frames, p/f wooden shadow battens (holloc wood, black enamel painted - 25x40mm) at wall peripheries and ends, extra frame work for fixing lights, making cutouts for electrical / HVAC / plumbing works etc. complete.
Repair to existing POP false ceiling with steel mesh 6×6mm mesh, 22 gauge thickness screwed/ bolted to GI frame work with steel screws, washers at 375mm c/c to the ceiling section applying POP superfine quality to a thickness not less than 10mm as per requirement. The rate should include for openings for light, fittings, grills diffusers, cutouts and scaffolding etc as per direction of E-I-C
Repair to existing Gypsum board false ceiling with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete but excluding the cost of painting as per direction of E-I-C
Repair to existing Armstrong false ceiling with necessary screws including replacing of damaged armstrong tiles with new one of same design, colour and thickness etc. including the cost of fixing of additional hangers for stability of existing frame, making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per direction of E-I-C
Supplying and stacking of brick tiles 100 class Designation and stacking at required floor level including transportation, loading, unloading, lifting etc. complete.
12 mm cement plaster of mix: 1:4 (1 cement : 4 fine sand {50% jamuna sand and 50% coarse sand} )
12 mm cement plaster of mix: 1:6 (1 cement : 6 fine sand {50% jamuna sand and 50% coarse sand} )
15 mm cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 cement : 4 fine sand {50% jamuna sand and 50% coarse sand} )
15 mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement : 6 fine sand {50% jamuna sand and 50% coarse sand} )
12 mm cement plaster of mix: 1:4 (1 cement : 4 coarse sand).
12 mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand).
15 mm cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 cement : 4 coarse sand).
15 mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement : 6 coarse sand).
12 mm plaster with neat cement punning 1:3(1 cement : 3 fine sand (50 % jamuna :50% coarse))., up to the height of 10 M from ground level,
20mm thick cement plaster 1:2 (1 Cement : 2 stone dust)
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
Neat cement punning
Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size dashed over and including the fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement.
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. ( Rate for per 50 kg bag of cement used in cement plaster work)
Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.
Pointing on stone work with cement moratr 1:3 (1cement: 3 fine sand) Raised and cut pointing
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on New Work
French spirit polishing : Two or more coats on new works including a coat of wood filler.
Melamine polish by Scrapping and cleaning of wooden chowkhat surfaces/wood work and filling the same wherever necessary with putty and applying two or more coats of melamine polish (prior to polishing scrapping shall be done once again with water proof sand paper to get smooth finished surface) of approved shade i.e. walnut finish as directed by EIC and make of wemberly shellac / lacquer or approved equivalent on the outer surface of wooden chowkhat manually to provide a uniform look. The cost of polishing shall be all inclusive (including the cleaning of floor and other surface to remove the stains of polish etc).
P/L POP calcium sulphates semi hydrate punning to the existing brick walls, soffits and sides of beams, corner, riser angles and junctions at all level etc. for a finished thickness not less than 3mm (in plumb) so as to give a smooth surface all complete with materials labours, tools and tackles scaffolding etc as per specification and direction of Engineer-in-Charge. The item includes scrapping of existing paint rendering the beams in line and level chipping extra concrete if required, racking out the RCC by a pointed hammer to make a rough surface to receive POP and making holes for electrical points etc.
Providing and applying Duco paint of approved brand and manufacture on existing chequred floor tiles by scrapping, moping and preparing the dust free surface,including appyling additional coats wherever required to achieve even shade and colour (true red or any shade) .Two or more coats
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead: With cement mortar 1:4 (1 cement : 4 fine sand {50% jamuna sand and 50% coarse sand} )
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5sq. metres and under including cutting the patch in proper shape,rakingout joints and preparing and plastering the surface of the wallscom pleteincluding disposal of rubbish to the dumping ground within 50 metres lead: With cement mortar 1:4 (1 cement : 4 coarse sand)
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Window chowkhats
Making the opening in brick masonry including dismantling in floor walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. For door/ window/ clerestory window
Renewing glass panes, with putty and nails wherever necessary : Float glass panes of thickness 4 mm
Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 5 mm
Renewing glass panes and refixing existing wooden fillets Float glass panes of thickness 4mm
Regarding terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or bricks excluded) within 50 metres lead.
Flush pointing with cement mortar 1:3(1cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska with FPS brick tiles
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work.
Melamine polishing on wood work (one or more coat).
Repair to fencing including dismantling, providing and fixing, including hinges or cleats if required, site welding and re-erecting the fencing pannels in proper alignment in between channel post complete in all respect as per direction of engineer in charge. For repairing only one panel of area up to 3.50 sqm at a single location. (Structural steel if required, will be paid extra in the item of "steel work in single section").
Repair to fencing including dismantling, providing and fixing, including hinges or cleats if required, site welding and re-erecting the fencing pannels in proper alignment in between channel post complete in all respect as per direction of engineer in charge. For repairing two or three panel at a single location. Panel size up to 3.50 sqm. (Structural steel if required, will be paid extra in the item of "steel work in single section").
Repair to fencing including dismantling, providing and fixing, including hinges or cleats if required, site welding and re-erecting the fencing pannels in proper alignment in between channel post complete in all respect as per direction of engineer in charge. For repairing more than three panel at a single location. Panel size up to 3.50 sqm. (Structural steel if required, will be paid extra in the item of "steel work in single section").
Providing fixing GI wire mesh of size 100x100mm in slab with necessary nails etc. as directed by E.I.C (10 Gauge)
Providing, drilling, inserting nipples and injecting cement/cement sand slurry into cracks in beams, columns, slabs, etc. at required pressure, cutting of nipples etc. complete including centring & shuttering (to support the structure) and scaffolding at all levels in all respect as per direction of Engineer-in-charge. (weight of cement shall be measured)
Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge
Providing and fixing hard drawn steel wire fabric of size 35x75 mm mesh (weight 6 KG/m2) or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge.
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer- in-Charge. Note: Rates shall include the providing necessary ground wires etc. The levelling gauges, if used, shall be paid for separately. Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument. 50mm thick in Grade M 25 with cement content not less than 330 kg per cum
Providing, mixing and application of Non Shrink, Free flow Micro concrete Fosroc 's RENDEROC RG (S) or Sika Reo-- Microcrete 2 having compressive strength of around 40 N/mm2 after 28 days to an average thickness of upto 75 mm for pouring of micro concrete. up to level V complete in all respect as per detailed specifications enclosed, including applying and removal of rigid, totally leak proof shuttering/formwork etc. complete as per engineer in charge.
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 met res lead as per direction of Engineer-in-charge
Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer -in -charge.
Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work.
Demolishing brick work manually/mechanical means including stackingof serviceable material and disposal of unserviceable material within50 metres lead as per direction of Engineer-in-charge. In cementmortar
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured): From brick work in cement mortar.
Demolishing stone rubble masonry including stacking of serviceable material and disposal of unserviceable material within 50 metres lead:In cement mortar.
Removing mortar from stones and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured).In cement mortar.
Dismantling and taking out doors, windows and clerestory window shutters (steel or wood) including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area 3 sq. metres and below.
Dismantling and taking out doors, windows and clerestory window shutters (steel or wood) including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area beyond 3 sq. metres.
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats.
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm
Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unserviceable material within 50 metres lead.
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
Demolishing mud phaska in terracing and disposal of material within 50 metres lead.
Dismantling roofing included ridges, hips valleys and gutters etc. and stacking the material within 50 metres lead of: G.S. sheet
Dismantling roofing included ridges, hips valleys and gutters etc. and stacking the material within 50 metres lead of: Asbestos sheet
Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of T' or `L' iron or pipe.
Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of R.C.C.
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead: 75 to 80mm dia pipe
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead: 100 mm dia pipe
Dismantling G.I. Pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge. 15mm to 40mm nom bore
Dismantling G.I. Pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge. Above 40mm nom bore
Dismantling C.I. Pipes of including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes, lead at site within 50 metre lead as per direction of Engineer-in-charge. Upto 150mm dia
Dismantling of road gully chamber of various sizes including C.I. Grating with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 metres lead i/c refilling the excavated gap.
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Dismantling aluminium/ Gypsum partitions, doors windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50m lead as directed by Engineer-in- Charge.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to C & D Waste Recycling Plant for all leads including all lifts involved. (BA has to deposit the recycling processing charges at prevailing rates of per MT at C&D plant and submit the receipt to concerned EIC)
Taking out Rolling shutter / Rolling grill from SGR /TR/other locations by dismantaling /cutting hold fast i/c stacking within 50 M lead complete as per direction of Engineer -in- Charge
Removing, cleaning of floor and disposal of vinyl flooring for all lift and leads, complete in all respect as per direction of EIC.
Dismantling damaged wash basin/orissa wc pan/pedestal type wc/urinal stall etc. i/c removing fittings to be reused and disposal of malba to dumping ground complete.
Preparation and consolidation of subgrade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller i/c making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres.
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density)
Supplying and stacking at site. 90 mm to 45 mm size stone aggregate.
Supplying and stacking at site. 63 mm to 45 mm size stone aggregate.
Supplying and stacking at site. 53 mm to 22.4 mm size stone aggregate.
Supplying and stacking at site. Stone screening 13.2mm (Type A)
Supplying and stacking at site. Red Bajri
Supplying and stacking at site. Good earth
Supplying and stacking at site. Moorum
Laying , spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uniform thickness, hand picking , rolling with 3 wheeled road / vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fillup interstices of coarse aggregate watering and compacting to the required density.
Brick edging laid length wise with half brick depth including excavation, refilling and disposal of surplus earth lead up to 50 mtr With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. Bituminous portion
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. Water bound macadam.
Providing and applying tack coat using hot straight run bitumen of grade VG - 10 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : On bituminous surface @ 0.50 Kg / sqm.
2.5 cm premix carpet surfacing with 3 cum of stone chippings 10 mm nominal size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen contents) complying with IS : 8887-1995 using 96 kg per cum of chippings of road surface including consolidation with road roller etc complete.
Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete.
Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
Providing and fixing punched tape concertina coil (6 kg) 560mm dia after streching to be fixed on existing Y angle post over fencing / boundary wall streched upto 6mts. opening to be fixed with rivets, C-clips with all necessary arrangment, scaffolding complete in all respect with all lead & lift as directed by Engineer in Charge.
Providing and fixing reinforced barbed wire tape (RBT) (2.6mm) thick single wire along the boudary wall / fencing on angle iron post with all necessary fitting such as welding of nuts, bolts, clips, TSP & labour etc.complete (Cost of angle iron post or any steel member shall be paid seperately)
Reapairing and Refixing (available) punched tape concertina coil (6 kg) 560mm dia after streching to be fixed on Y angle arm.with clips and G.I. wire
Excavating holes upto 0.10 cum, including getting out the excavated soil, then returning the soil as deported in layers not exceeding 20 cm in depth, including consolidating and deposited layer by ramming watering etc., disposing of surplus excavated soil as directed with in a lead of 50 m and lift upto 1.5 m. All kind of soil
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand, filling the joints with course sand etc. all complete as per the direction of Engineer - in - charge.
Providing and laying 60 mm thick recycled cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of m sand, filling the joints with m sand etc. all complete as per the direction of Engineer - in - charge. Note: Recycled material to be used and procured from C&D Waste Recycling Process Plants.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
Providing and laying at or near ground level recycled kerb stone of cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 m sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). Note: Recycled material to be used and procured from C&D Waste Recycling Process Plants.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
Taking out existing CC interlocking paver blocks from footpath/central verge, including removal of rubbish, etc.disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50m lead as per direction of Engineer in Charge
Laying old CC interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm th compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in Charge (Old CC paver blocks shall be supplied by the department free of cost).
Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost)
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. WC Make- Hindware Model name- Orissa Pan (Eco) Size- 580mmX440mm Cat no. 20042 Cistern Make- Hindware Model- Sleek Fresh (Dual Flush) Size- 475X155X320mm Cat no. 510412
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. Make- Hindware Model name- Superb S Size- 540mmX350X395mm Cat no. 20118 (S-180) Cistern Make- Hindware Model- Sleek Fresh (Dual Flush) Size- 475X155X320mm Cat no. 510412
Providing and fixing white vitreous china wall mounted Europen water closet (Make Hindware) with seat and lid ,10 litres flushing cistern & manually controlled device with all fittings and fixtures complete including cutting and making good the walls and floors wherever required WC pan with ISI markd with solid plastic seat & lid. Make- Hindware Model name- Elegance Aura Size- 500X370X360mm Cat no. 92672 (P-225)
Providing and fixing white vitreous china flat back or half stall urinal of size 305x380x650 mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556 C.I. trap with outlet grating and other couplings in C.P. brass and cutting and making good the walls and floors wherever required. Make- Hindware Model name- OPUS Size- 305mmX380X650mm Cat no. 96014
Providing and fixing wall hung urinal division 10mm thick frosted curved toughened glass of size 450/300X900mm including necessary SS fitting complete in all respect as per direction of Engineer-in-charge. Make- Hindware, Cat. No. SU110SC-C-STD-CR
Providing & fixing Grab bar Eco 600mm including all necessary fittings complete in all respect as per direction of EIC. Make- VOLGA, Cat no. AL 805
Providing & fixing Grab bar Eco 450mm including all necessary fittings complete in all respect as per direction of EIC. Make- VOLGA, Cat no. AL 804
Providing & fixing Grab bar Eco 300mm including all necessary fittings complete in all respect as per direction of EIC. Make- VOLGA, Cat no. AL 803
Providing and fixing washbasin with C.I. brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Washbasin size 500x400 mm with a pair of 15mm C.P.brass pillar taps. Make- Hindware Model name- PURE Size- 500mmX400mm Cat no. 10127
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Flat back wash basin size 550x400 mm with a single 15 mm C.P. brass pillar tap Make- Hindware Model name- PURE Size- 500mmX400mm Cat no. 10127
Providing and fixing washbasin with C.I. brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : Oval type washbasin for mounting under the counter (Oval basin make Hindware, Waste coupling : Parko/Volga Bottle Trap: Parko/Volga with a 15 mm C.P. brass pillar tap. Make- Hindware Model name- ZEN Size- 560X450mm Cat no. 10049
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm Make- Hindware Model name- Orissa Pan (Eco) Size- 580mmX440mm Cat no. 20042
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Make- Hindware Model name- Superb S Size- 540mmX350X395mm Cat no. 20118 (S-180)
Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS-7231 with all fittings and fixtures complete. 10 Ltr. Capacity-White Make- Hindware Model- Sleek Fresh (Dual Flush) Size- 475X155X320mm Cat no. 510412
Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete: White solid plastic seat with lid.
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe 32mm dia
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe 40 mm dia
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete.
Providing and fixing 5mm thick looking mirror of approved make of required size with 6mm ply in backside with 5mm thick margin on the side of the glass with wooden moulding on the corner of glass complete.
Providing and fixing 5 mm thick looking mirror of approved make of required size over existing ply/base i/c at all levels complete
Providing and fixing toilet paper holder with flap : C.P. brass Make- VOLGA, RECTA collection Cat no. RT-458
Providing and fixing soil, waste and vent pipes (Sand cast iron S&S pipe as per IS: 1729). 100mm dia
Providing and fixing soil, waste and vent pipes (Sand cast iron S&S pipe as per IS: 1729). 75mm dia
Providing and filling the joints with spun yarn cement, slurry and cement mortar 1:2 ( 1 cement: 2 fine sand) in S.C.I/C.I pipes. 100mm dia
Providing and filling the joints with spun yarn cement, slurry and cement mortar 1:2 ( 1 cement: 2 fine sand) in S.C.I/C.I pipes. 75mm dia
Providing and fixing plain bend of required degree (Sand cast iron S&S as per IS 1729). 100mm
Providing and fixing plain bend of required degree (Sand cast iron S&S as per IS 1729).75mm
Providing & fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fitting of approved quality and colour weighing not less than 105 gms.
Providing & fixing Hindware make fully automatic sensors for integrated urinal complete in all respect in fully operational condition by replacing the faulty sensor. Make- Hindware Cat no. F860083CP
Providing & fixing AOS concealed fully automatic sensors for integrated urinal complete in all respect in fully operational condition by replacing the faulty sensor. Make- Hindware, Parryware
Providing and fixing Vitreous china Urinal partition of standard design and required color, of Hindware make using screws etc complete Make- Hindware Model name- Division plate Size- 325X165X690mm Cat no. 61001
Providing and fixing Towel rail 24" (Cromium plated), Parko/Volga Make using screws etc. complete. Make- Volga, GENEX collection Cat no.GX952
Providing and fixing CP brass Towel ring of approved quality and make to wall using necessary screws etc. complete.
Providing and fixing CP jali for nahni trap with or without hole using white cement and pigment to match the tile colour, complete.
Repair to pvc flushing cistern by replacing defective syphon set to make the cistern operational complete in all respect as per direction of EIC
Repair to pvc flushing cistern by making minor adjustment and replacing minor parts like handle, ball cock, washer etc. complete in all respect as per direction of EIC
Providing and filling Khangar in sunken portion of toilets, baths, pantries etc. laid to required slope, consolidating etc., complete in all respect as per direction of EIC
Removing leakage from nahni trap/wc etc. by applying cement mixed with water proofing compound of Dr. Fixit, Sika, Fosroc i/c refixing CP jali wherever reqd. complete job
Providing and fixing Stainless Steel A ISI 304 kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board- 24"X18"bowl depth 200 mm with Tap hole. Make- VOLGA, Cat. no. 115
Providing and fixing CP brass waste of app. make for sink or wash basin complete 32mm dia complete.
Providing and fixing CP brass waste of app. make for sink or wash basin complete 40mm dia complete.
Providing and fixing CP brass Jet and accessories to english type WC of approved quality and make complete.
Providing and fixing CP brass bottle trap of approved quality.
Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as requird to complete the works. Make:As per approved make. 125 x 125 x 1mm
Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as requird to complete the works. Make:As per approved make. 75 x 75 x 1mm
Providing and fixing CP brass jali with frame over 100mm floor traps including finishing with C.M. 1:3 (1cement : 3coarse sand) complete.
Providing and fixing stainless steel soap dish including necessary screws etc complete.
Providing and fixing PVC nahani trap of 110mm dia including jointing with necessary adhessive etc. complete.
Providing and fixing PVC P Trap of 110mm dia including jointing with necessary adhessive etc. complete.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 15 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 20 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain &brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 15 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(25MM)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(32 mm nominal dia Pipes )
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(40 mm nominal dia Pipes )
Providing and fixing soil,waste and vent pipes of app. make. PVC pipe 32/40mm dia. i/c adhessive, cutting chase in wall etc. complete.
Providing and fixing soil,waste and vent pipes of app. make.i/c filling joints with adhessive solution. PVC pipe 75mm dia.
Providing and fixing soil,waste and vent pipes of app. make. i/c filling joints with adhessive solution. PVC pipe 100mm dia.
Providing and fixing soil,waste and vent pipes of app. make. i/c filling joints with adhessive solution. PVC pipe 150mm dia.
Providing and fixing medium class GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc. (Internal work - Exposed on wall). 15mm dia, nominal bore.
Providing and fixing medium class GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc. (Internal work - Exposed on wall). 20mm dia, nominal bore.
Providing and fixing medium class GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc. (Internal work - Exposed on wall). 25mm dia, nominal bore.
Providing and fixing medium class GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc. (Internal work - Exposed on wall). 32mm dia, nominal bore.
Providing and fixing medium class GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc. (Internal work - Exposed on wall). 40 mm dia, nominal bore
Providing and fixing medium class GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc. (Internal work - Exposed on wall). 50 mm dia, nominal bore
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal bore
Providing and fixing medium class GI pipes complete with GI fittings including trenching & refilling etc. (external work).15mm dia, nominal bore.
Providing and fixing medium class GI pipes complete with GI fittings including trenching & refilling etc. (external work). 20mm dia, nominal bore.
Providing and fixing medium class GI pipes complete with GI fittings including trenching & refilling etc. (external work). 25mm dia, nominal bore.
Providing and fixing medium class GI pipes complete with GI fittings including trenching & refilling etc. (external work). 32 mm dia, nominal bore
Providing and fixing medium class GI pipes complete with GI fittings including trenching & refilling etc. (external work). 40 mm dia, nominal bore
Providing and fixing medium class GI pipes complete with GI fittings including trenching & refilling etc. (external work). 50 mm dia, nominal bore
Providing and fixing medium class GI pipes complete with GI fittings including trenching & refilling etc. (external work). 65 mm dia. nominal bore
Providing and fixing medium class GI pipes complete with GI fittings including trenching & refilling etc. (external work). 80 mm dia, nominal bore
Providing and fixing brass bib cock of approved quality: 15mm nominal bore
Providing and fixing brass stop cock of approved quality.15mm dia, nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 15 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 20 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 25 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 32 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): 40 mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure with plastic floats complete. 15 mm nominal bore.
Providing and fixing ball valve (brass) of approved quality, High or low pressure with plastic floats complete. 20 mm nominal bore.
Providing and fixing ball valve (brass) of approved quality, High or low pressure with plastic floats complete. 25 mm nominal bore.
Providing and fixing brass ball valve with handle of approved quality :15 mm nominal bore
Providing and fixing brass ball valve with handle of approved quality : 20 mm nominal bore
Providing and fixing brass ball valve with handle of approved quality : 25 mm nominal bore
Providing and fixing brass ball valve with handle of approved quality : 32 mm nominal bore
Providing and fixing ball valve (CPVC) of approved quality, High or low pressure, with plastic floats complete : 25 MM Nominal dia
Providing and fixing ball valve (CPVC) of approved quality, High or low pressure, with plastic floats complete : 20 MM Nominal dia
Providing and fixing gun metal non-return valve of approved quality (screwed end) 25mm nominal bore. Horizontal
Providing and fixing unplasticised P.V.C. connection pipe with brass unions: 45 cm length-15 mm nominal bore
Boring with 100 mm dia casing pipe for hand pump/ tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested : a) Upto 6 metres depth.
Boring with 100 mm dia casing pipe for hand pump/ tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested : b) Beyond 6m and upto 12 m depth.
Boring with 100 mm dia casing pipe for hand pump/ tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested : c) Beyond 12 m and upto 18 m depth.
Boring with 100 mm dia casing pipe for hand pump/ tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested : Beyond 18 m and upto 24 m depth.
Boring with 100 mm dia casing pipe for hand pump/ tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested : Beyond 24 m and upto 30 m depth.
Boring with 100 mm dia casing pipe for hand pump/ tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the hand pipe/tube well is lowered and tested : Beyond 30 m depth.
Providing and fixing GI union in GI pipe including cutting & threading the pipe & making long screws etc. complete (new work). 15mm nominal bore
Providing and fixing GI union in GI pipe including cutting & threading the pipe & making long screws etc. complete (new work). 20mm nominal bore
Providing and fixing GI union in GI pipe including cutting & threading the pipe & making long screws etc. complete (new work). 25mm nominal bore
Providing and fixing GI union in existing GI pipe line, cutting & threading the pipe and making long screws including excavation refilling the earth or cutting of wall and making good the same complete wherever required. 15mm nominal bore
Providing and fixing GI union in existing GI pipe line, cutting & threading the pipe and making long screws including excavation refilling the earth or cutting of wall and making good the same complete wherever required. 20mm nominal bore
Providing and fixing GI union in existing GI pipe line, cutting & threading the pipe and making long screws including excavation refilling the earth or cutting of wall and making good the same complete wherever required. 25mm nominal bore
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 32 mm nominal bore
Providing and fixing CPVC union in existing CPVC pipe including jointing with adhesive etc.complete. 20mm nominal bore
Providing and fixing CPVC union in existing CPVC pipe including jointing with adhesive etc.complete. 25mm nominal bore
Providing and fixing CPVC union in existing CPVC pipe including jointing with adhesive etc.complete. 40mm nominal bore
Providing and fixing CPVC union in CPVC pipe including jointing with adhesive etc.complete (new work). 25mm nominal bore
Providing and fixing C. P. brass bib cock of approved quality conforming to IS : 8931. 15mm nominal bore Make- VOLGA Model name- FLORA Cat no. FL-203
Providing and fixing C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore Make- VOLGA Model name- FLORA Cat no. FL-204
Providing and fixing Two way Bib Cock (Cromium plated) in toilets with provision for Jet spray with 12mm plastic pipe on W.C., Parko/Volga Make
Providing and fixing CP brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931. 15mm nominal bore.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore
Providing & Fixing PTMT Bib cock of approved quality and colour-15 mm nominal size, 86 mm long, weighing not less than 88 gms.
Providing and fixing PTMT pillar cock of approved quality and colour-15 mm nominal bore, 107mm long, weighing not less than 110 gms.
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 20 mm nominal bore, 120 mm long, weighing not less than 198 gms
Cutting holes upto 30x30 cm in walls including making good the same. With common burnt clay F.P.S. (non modular) bricks
Cutting holes upto 15x15 cm in RCC floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc with cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone agg. 20 mm nominals size) including finishing complete so as to make it leak proof.
Making chases upto 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. Pipe etc.
Making hole up to 20x20 cm including embedding pipes upto 150 mm dia in masonary and filling with cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including disposal of malba.
Repairing of existing GI/CPVC water line including cutting, threading, changing of damaged pipe/ fittings etc complete in all respect. (replacing GI/CPVC pipe up to 2.0 mtrs if required ). Pipe 15 mm dia to 25 mm dia.
Providing and fixing CP cap to bib cock/ pillar cock/ angle valve etc. using necessary screws etc. complete.
Taking out the existing defective submerssible pump & motor including G.I Pipe from the existing bore and lowering the same in existing bore after necessary repairs i/c arrangement for all T & P, labour required for the job per direction of E-in-charge complete in all respect (excluding cost of repairing the pump)
Providing and fixng of GI tank nipple 15 mm nominal dia.
Providing and fixng of GI tank nipple 20 mm nominal dia.
Providing and fixng of GI tank nipple 25 mm nominal dia.
Providing and fixng of GI tank nipple 32 mm nominal dia.
Providing and fixng of CPVC tank nipple 20 mm nominal dia
Providing and fixng of CPVC tank nipple 25 mm nominal dia
Providing and fixng of CPVC tank nipple 40 mm nominal dia
Repair and rewinding of monoblock pump set up to 1.50 HP including to & fro carriage of workshop and dismantaling/refixing at site complete as per requirement.
Repair and Rewinding of submersible pump / motor up to 1.5 HP of any make i/c taking to workshop and back and rewinding, changing bearings / bushes, alignment of shaft, oiling, greasing, changing packings/seals as per requirement complete.
Repair and rewinding of Jet Pumpset up to 1.00 HP including rewinding, changing bearings/bushes, alignment of shaft, oiling, greasing, changing packings/seals, to & fro carriage of workshop and dismantaling/refixing at site complete as per requirement.
Providing and fixng 3 core 2.5 Sqmm flat cable for Submersible pump of Finolex / Havells / Polycab make.
Supplying Installation, lowering, commissioning & testing of KSB make submersible pump to be lowered in 100 mm dia casing pipe complete with submersible Motor of 1.50 HP suitable for operation on 400/415 Volt Single phase 50 cycle with following performance: A) Discharge: 0.56 Ltrs./Second. B) Max. Head: 73.00 M. C) RPM: 2900. D) Head discharge: 39.00 to 98.00 M. E) Volt: 220
Providing and fixing single phase starter for 1.50 HP submersible pump/motor including making connection complete.
Supplying Installation & testing of KSB make submersible pump to be lowered in 100 mm dia casing pipe complete with submersible Motor of 1.00 HP,CORA 2C/15, suitable for operation on 400/415 Volt Single phase 50 cycle with following performance: A) Discharge: 0.56 Ltrs./Second. B) Max. Head: 73.00 M. C) RPM: 2900. D) Head discharge: 39.00 to 98.00 M. E) Volt: 220
Providing and fixing single phase starter for 1.00 HP submersible pump/motor including making connection complete.
Providing and fixing MS clamp for 25/32 mm dia pipes.
Providing and fixing MS clamp for 100 mm dia pipes.
Providing and fixing monoblock booster pump of crompton greaves or eq. make i/c necessary fittings, testing etc. complete. 1.00 HP
Providing and fixing monoblock booster pump of crompton greaves or eq. make i/c necessary fittings, testing etc. complete. 0.5 HP
Providing and fixing UPVC make prakash casing pipe 100mm dia inclduing lowering the same with UPVC socket, adhesive etc complete in all respect.
Providing and fixing pvc cover to over head pvc water tanks up to 1000 ltrs.
Cleaning of O/H water storage tank up to 1000 ltrs. i/c cleaning with potassium permanganate / bleaching powder and finally with clear water complete.
Providing and fixing brass ferrule with CI mouth cover including boring and tapping the main 15mm nominal bore i/c digging of pit upto the depth of main line and refilling the pit after completing the job.
Providing and replacing the defective/damaged CP brass spreader with union and clamps for urinals including dismantalling and refixing complete.
Repairing CP brass pillar cock/angle valve/bib cock etc. by replacing defective phase complete.
Providing and fixing C P brass pillar cock 15 mm nominal bore of approved make and quality
Providing and fixing GI elbow / socket / tee in existing GI pipe line cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 15mm to 20 mm nominal bore.
Providing and fixing GI elbow / socket / tee in existing GI pipe line cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 25mm to 32 mm nominal bore.
Providing and fixing 32/40mm dia pvc bend/ socket / tee with or without door of app. Make i/c adhessive, cutting chase in wall etc. complete.
Providing and fixing 75 mm dia pvc bend / socket / tee with or without door of app. make i/c adhessive, cutting chase in wall etc. complete..
Providing and fixing 100 mm dia pvc bend / socket / tee with or without door of app. make i/c adhessive, cutting chase in wall etc. complete.
Providing and fixing 150 mm dia pvc bend / socket / tee with or without door of app. make i/c adhessive, cutting chase in wall etc. complete.
Providing and fixing 100 mm MS casing cover for summersible pump
Providing and placing 50 mm thick chisel dressed red sand stone wherever required at all floor levels complete.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Five layer white tank.
Providing, fixing and lowering HDPE pipe 32 mm dia. Confirming to (IS: 14151 [1 & 2] and IS-4984) of reliance or equivalent make including fixing of SS nipple on both ends with the help of rivets, clamping, T&P, labour, material etc. complete. For submerssible pumps.
Providing & fixing new water meter of approved make (DJB approved) in existing 15mm GI line, dismantaling old meter if available including GI line & required fittings etc. complete in all respect as per direction of EIC.
Providing and laying Geotextile membrane, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm.
Supplying and filling charcoal in rain water harvesting recharge pit i/c compacting complete.
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 100 mm dia S.W. pipe
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:150 mm dia S.W. pipe
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 200 mm dia S.W. pipe
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 250 mm dia S.W. pipe
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches S.W. pipes including bed concrete as per standard design: 100 mm dia S.W. pipe
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches S.W. pipes including bed concrete as per standard design: 150 mm dia S.W. pipe.
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches S.W. pipes including bed concrete as per standard design: 200 mm dia S.W. pipe.
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches S.W. pipes including bed concrete as per standard design: 250 mm dia S W pipe
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround S.W./PVC pipes including bed concrete as per standard design: 75mm dia SW/PVC pipe
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 150x100 mm P type. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing and fixing square-mouth S.W. gully trap grade class SP-I complete with C.I. Grating brick masonry chamber with water tight C.I. Cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm P type. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 100 mm dia. R.C.C. pipe.
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 150 mm dia. R.C.C. pipe
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 250 mm dia. R.C.C. pipe
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 300 mm dia. R.C.C. pipe.
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:a) Inside size 90x80 cm and 45 cm deep including C.I. Cover with frame (light duty) 455x610 mm internal diaensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg.): With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : b) Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diaeter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Extra for depth for manholes. Size 90x80 cm. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Extra for depth for manholes. Size 120x90 cm.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Supplying and fixing C.I. Cover without frame for manholes. 455 x 610 mm rectangular C.I. Cover (light duty) the wieght of the cover to be not less than 23 Kg.
Supplying and fixing C.I. Cover without frame for manholes. 500 mm dia. C.I. Cover (medium duty) the wieght of the cover to be not less than 58 Kg.
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. LD - 2.5. Rectangular shape 450x600mm internal dimensions
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. H D -20. Circular shape 560 mm internal diaeter
Supplying and fixing C.I. Cover 300 x 300 mm without frame for gully trap (standard pattern) the wieight of cover to be not less than 4.5 kg.
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diaeter
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) : Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with pre-cast R.C.C. vertical grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Making soak pit 2.5 m diaeter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diaeter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Supplying and fixing C.I. Cover with frame for manholes. 455 x 610 mm rectangular C.I. Cover (light duty) the wieght of the cover and frame to be not less than 23 + 15 Kg.
Supplying and fixing C.I. Cover with frame for manholes. 500 mm dia. C.I. Cover (medium duty) the wieght of the cover and frame to be not less than 58 + 58 Kg.
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. 300x300 mm
Supplying and fixing C.I. Cover 300 x 300 mm with frame for gully trap (standard pattern) the wieight of cover and frame to be not less than 4.5 + 2.7 kg.
Cleaning of septic tank of any size with mechanical means including digging out all the silt and disposing the same to the dumping ground upto any lead complete in all respect.
Providing and fixing RCC manhole cover with frame to the existing brick masonry chamber complete (outer frame size 660x660mm)
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 4.0 mm thickness
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5.5 mm thickness
Providing and fixing glazing in aluminium door, shutters and partitions etc. with PVC / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 8.0 mm thickness
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width
Repairing of aluminum doors/windows/ventilators by changing damaged butt hinges, screws i/c dismantling and refixing the leaf, tightening of corner screws etc. complete job. For repairing of one leaf of any size at one location.
Repairing of aluminum doors/windows/ventilators by changing damaged butt hinges, screws i/c dismantling and refixing the leaf, tightening of corner screws etc. complete job. For repairing of two to three leaf of any size at one location.
Repairing of aluminum doors/windows/ventilators by changing damaged butt hinges, screws i/c dismantling and refixing the leaf, tightening of corner screws etc. complete job. For repairing more than three leafs of any size at one location.
Fixing of available aluminium partition with glass and board including screws, transportation to site etc. complete in all respect as directed by EIC
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 6.0 mm thickness
Providing and fixing 12 mm thick toughened glass door of required size and design with patch fitting and floor spring (ozone/doorset make) etc. complete.
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-chargs. With stainless steel cover plate. 100 kg capacity
Providing and fixing handle (18" long) of Ozone/doorset make for toughened glass door with necessary screws etc. complete.
Providing and fixing aluminium hinges upto 150 mm in aluminium doors / windows / ventilators i/c screws etc. complete
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : b) For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). With Shampane colour anodising.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) with shampagne colour
Providing and fixing aluminium Handle for RHS/LHS aluminium windows of similar finish as for window including cleats, screws etc complete
Providing and fixing aluminium American handle 200mm long including necessary screws etc. complete with similar finish as of door.
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-Charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-Charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-Charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge: With average thickness of 120 mm and minimum thickness at khurra as 65 mm
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-Charge over the RCC slab including adjoining walls upto 100 mm height including cleaning the surface before treatment. b) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-Charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. c) The whole terrace so finished shall be flooded with water for a minimum period of one week for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge
Cleaning of manhole and connected sewerlines of any size manually / mechanically with in the premises including labour, khappachi, rope, all T&P and disposal of garbage/malba outside the periphery of bldg to nearest dumping ground. (Rate per manhole)
Cleaning the terrace of the 11kv S/Stn including clearing the blockages of rain water pipes / spouts and removal of garbage, vegetation etc. from terrace and sunshades and disposal of the same to nearest MCD dumping ground with all T & P, ladder etc.
Supplying and filling malba under floor/any other location including watering , ramming, consolidation, levelling , dressing etc. complete.
Making arrangement of Jhoola including labour, rope, ladder etc. as per requirement complete. (The unit of per day is meant for 8 hours and it shall be paid judicially on pro-rata basis depending upon the quantum and duration of job but not less than 0.50 day)
Providing and fixing GI chicken wire mesh on concrete and masonry joints using nails, T&P etc. as per direction of the EIC complete.
Making chase in wall for fixing recessed skirting complete including repairing the same with cement mortar 1:4 (1 cement : 4 coarse sand)
Making round opening in wall for exhaust fan upto 450 mm including making good the wall, jambs with cement mortar 1:4 (1 cement : 4 coarse sand) and finishing complete.
Dewatering at locations of water logged areas like cable trenches, taxi track, floors etc. using required pump and motor irrespective of source of incoming water including all T&P, labour , etc. complete. (The unit of per day is meant for 8 hours and it shall be paid judicially on pro-rata basis depending upon the quantum and duration of job but not less than 0.25 day)
Supplying and filling in plinth with Jamuna sand under floors including, watering, ramming, consolidating and dressing complete.
Extra for pressing of MS sheet for making grooves in New pattern MS gates.
Providing and fixing galvanized steel chain link fencing with 75 mm mesh size, 3.15 mm dia mesh wire conforming to IS:2721, MS stirrups wire 2.5 mm dia with tying wire 1.6 mm dia mild steel including providing 25 mm x 4.75 mm MS stretcher bars, eye bolt strainers, ring nuts, hair pins, staples of 3.5 mm wire, cleats of MS angle 75 x 60 x 6 mm, MS droppers 25 mm x 4.75 mm with 38 mm x 4.85 mm half round staples etc., completed as per drawings and specified as directed. (Flat, angle etc will be paid separately).
Replacing old floor door spring with new floor door spring of approved make & quality by dismantling the aluminium door and refixing after replacing the non functional spring complete.
Roof grouting with cement mortar (1:3) i/c mixing water proofing compound and hacking the joints,roughening the surface with brushes etc. complete.
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm
Grouting the joints of floor tile having joints 4mm wide using grout mix with desired shade including hardner filling grouting and finish the joints complete in all respect size of tile is 600x600
Cutting holes upto 15x15 cm in walls for fixing the hangers and repairing the same after fixing hangers with cement concrete 1:2:4 (a cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including disposal of malba etc. complete.
Providing fixing hand spray for EWC of approved make.
P/F CP extension piece of 40mm to 50mm long screwed
P/F Teak Wood (Second class) tappered moulding/lipping over wooden chowkhat 40x5mm including polishing the same complete.
Repairs to window sunshades of size upto 1 sqm area including including chiseling/removing the loose concrete, plastering the RCC surface with cement mortar 1:4 (1 cement: 4 fine sand {50% jamuna sand and 50% coarse sand}) of thickness from 12 mm to 20mm up to floor V level complete
Providing and fixing 4mm th Alucobond Facia Sheet complete with all necessary screws and fittings including aluminium section Frame, etc. complete (Rates include ACP Sheets, Aluminium Sections for fixing ACP Sheets and Anchor Fasteners. Only structural steel is payable separately)
Providing and fixing low height opaque partition 63-65mm thick(approx) from floor to desired height (below false ceiling) consisting of 45×45mm 1st class kal wood frame work with a fire retardant paint applied on it forming frame work at 450-600 C/C nominal in both directions fixed rigidly in flooring and side support by screws/GI cleat etc. The frame work shall have on both side 9mm thick commercial ply, exterior sides of ply shall be laminated with 1.0mm thick laminate of approved shade and approved colour texture with bands in between (as per design) fixed with adhesive. Necessary extra kal wood runner and making provision for laying conduits switches box with 8 x 75 mm teak wood or laminated skirting , polishing etc complete, including 63x20 mm teakwood moulding on sides/top in required pattern including polishing complete,as per direction of E-I-C
Providing and fixing tag board on partitions comprising of soft board 12mm thick compact grade with fabric wrapping of approved quality and wooden margin 5x12mm all around complete in all respect.
Providing and fixing 12 mm thick and 125mm wide fascia plate in ply with outer exposed surface laminated (1.0mm) of approved shade with second class teak wood 6mm wooden margin including melamine polishing.
Providing and placing in position work station top as per drawings made up of 18 mm thick MDF board with front edges full round 30 mm thick post forming with flex of approved shade on top exposed surface and resting on side drawer unit at sides and resting on galvanised steel cleats at other ends with Computer Keyboard tray with nylon runners, Alumunium channel, cable master as per available space. The joinery is to be attained by means of appropriate galvanised steel cleats and all fixing screws shall be concealed with cable manager.
Providing and fixing low height opaque partition 54mm thick from floor to desired height (below false ceiling) consisting of 45×45mm 1st class kail wood frame work with a fire retardant paint applied on it forming frame work at 450-600 C/C nominal in both directions fixed rigidly in flooring and side support by screws/GI cleat etc. The frame work shall have one side 8/9mm thick commercial ply and gap in frame work filled with 45mm thick up tuiga mineral fibre wool with a density of 50 kg/M³, exterior sides of ply shall be laminated with 1.0mm thick laminate of approved shade and approved colour texture with bands in between (as per design) fixed with adhesive. Necessary extra kal wood runner and making provision for laying conduits switches box with 8 x 75 mm teak wood or laminated skirting, polishing etc complete.
Providing and fixing low height opaque partition framework from floor to desired height (above false ceiling) consisting of 45×45mm 1st class kal wood frame work with a fire retardant paint applied on it forming frame work at 450-600 C/C nominal in both directions fixed rigidly in flooring and side support by screws/GI cleat etc. The frame work shall have gap filled with 45mm thick up tuiga mineral fibre wool with a density of 50 kg/M³. Necessary extra kal wood runner complete.
Providing and fixing POP false ceiling which includes providing and fixing GI angle of size 0.55mm thick having two equal flanges of 25mm along perimeter of ceiling screw fixed to brick wall/partition with the help of nylons sleeves and screws at 610mm centers (approved). The suspending main section of size 25×40×0.8mm thick with the help of a level adjuster made of zinc alloy 50×25mm as per drawing from the soffit at 1220mm centers with G I hanger 25×3mm fixed to soffit with GI cleat and metal expansion, fasteners. Ceiling section of 0.56mm thick having knurled web of 40mm and two equal flanges of 35mm thick lips of 8.5mm are then fixed to the main section with the help of connection clips/screw and in direction perpendicular to the main section 375mm centers, including providing & fixing steel mesh 6×6mm mesh 22 gauge thickness screwed/ bolted to GI frame work with steel screws, washers at 375mm c/c to the ceiling section applying POP superfine quality to a thickness not less than 10mm. The rate should be include for openings for light, fittings, grills diffusers and cutouts etc. have to be made with the additional frame of GI angle of size 0.55mm thick having to equal flanges of 25mm supported suitably. The rate should also include for necessary supports scaffolding etc. as required for completing the work in all respects in drawing surface coffered ceiling, flat, vertical, curved surfaces. POP vertical bands, lighting coving (payments shall be made of the POP finished surface consisting of all operations stated above).
Providing and fixing false ceiling tiles of approved materials of size 600x600 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gsm/sqm) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x35 mm made of 0.30 mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200 x 600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30mm thick(minimum) sheeet to be interlocked at middle of the 1200 * 600 mm pane; to form grids of 600 x 600 mm laying false ceiling tiles of approved texture in the grid including wherever required cutting/making opeing of services like diffusers, grills, light fittings, fixtures, smoke decetors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fastners, 2.8 mm GI adjustable rods with galvanised level clips spaced at 1200 m center to center main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer - in - Charge. a) with Dune 600x600x16 RH-99 tiles (Tegular Edge./Board edge/Microlook Edge.) of Armstrong make
Providing and fixing false ceiling tiles of approved materials of size 600x600 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gsm/sqm) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x35 mm made of 0.30 mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200 x 600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30mm thick(minimum) sheeet to be interlocked at middle of the 1200 * 600 mm pane; to form grids of 600 x 600 mm laying false ceiling tiles of approved texture in the grid including wherever required cutting/making opeing of services like diffusers, grills, light fittings, fixtures, smoke decetors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fastners, 2.8 mm GI adjustable rods with galvanised level clips spaced at 1200 m center to center main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer - in - Charge. b) with Ultima 600x600x19 RH-95 tiles (Tegular Edge./Board edge/Microlook Edge) Of Armstrong make
Extra for marble stone flooring in tread and risers using single length of stone above 1.20 mtr.
P/F full ht. in approved pattern opaque / partly glazed (with 5.5 mm thk.glass fixed with IInd class teak wood beading ) partition 63-65 mm thick from floor to false ceiling consisting of 45×45mm 1st class. kail wood frame work with a fire retardant paint applied on it forming frame work at 450-600 c/c in both directions fixed rigidly in flooring and ceiling by screws/GI cleat etc. The frame work shall have on both sides 9mm thick commercial ply and gap in between filled with 45mm thick UP tuiga mineral fibre wool of density 50 kg/M³, exteriors sides of ply shall be laminated with 1.0mm thick laminate of approved shade and approved colour texture with bands in between (as per design) fixed with adhesive. Necessary extra kail wood runner and making provision for laying conduits switches boxes with 8 x 75 mm teak wood or laminated skirting , polishing etc complete, as per instruction of Engineer in charge.. (Any frame work beyond partition height shall be paid extra)
P/F full ht. in approved pattern 55 mm thick from floor to false ceiling consisting of 45×45mm kail wood wood frame work with a fire retardant paint applied on it forming frame work at 450-600 c/c in both directions fixed rigidly in flooring and ceiling by screws/GI cleat etc. The frame work shall have on one sides 9mm thick commercial ply,exteriors sides of ply shall be laminated with 1.0mm thick laminate of approved shade and approved colour texture with bands in between (as per design) fixed with adhesive. Necessary extra kail wood runner and making provision for laying conduits switches boxes with 8 x 75 mm teak wood or laminated skirting , polishing etc complete, as per instruction of Engineer in charge..
Providing making and fixing wall mounted cabinets firmly fixed to the wall / partition, 375 -450 mm deep comprising of 19 mm commercial board for shelves, bottom, shutters,apron, with all exposed of the cabinet with 1.0mm thk. lamination as per approved texture design including all cut edges of shutter to have 25x12mm moulded teak lipping, All hardware of brass plate hinges, locks, with all wooden surface to be stained spirit polished with melamine finish. Interior of the Cabinets to have 3 coats of synthetic enamel paint with a coat of primer and back side should have 9 mm thick ply with primer. 19 mm commercial board top with pelmet band fixed to wall , all out side surfaces laminated and painted inside. (measurement will be made for front elevation of the cabinet). Fixing to be done with dash fastener as per direction of EIC
Providing making and fixing wall mounted cabinets firmly fixed to the wall / partition, 375 -450 mm deep comprising of 19 mm commercial board for shelves, bottom, shutters,apron, with all exposed of the cabinet with 1.0mm thk. lamination as per approved texture design including all cut edges of shutter to have 25x12mm moulded teak lipping, All hardware of brass plate hinges, locks, with all wooden surface to be stained spirit polished with melamine finish. Interior of the Cabinets to have 3 coats of synthetic enamel paint with a coat of primer and back side should have 9 mm thick ply with primer. 19 mm commercial board top without pelmet band fixed to wall , all out side surfaces laminated and painted inside. (measurement will be made for front elevation of the cabinet). Fixing to be done with dash fastener as per direction of EIC
P/F toilet’s & pantry’s counters underneath fascia of 300mm wide of desired length made up of 19mm thick commercial Board with 1.0mm laminate on user side and with balancing white on other side with 4 mm second class teak margin on top and bottom end fixed with kail wood batten of cross section 45×45mm along the horizontal length of fascia and of 45×45mm along the two extreme vertical ends, if required, (the cost of frame shall be paid extra) completed in all respect.
Providing and fixing of patch sets of approved brand and make (as approved by EIC) for doors with pivot etc complete as per the direction of EIC with stainless steel cover plate
Taking out and Repairing the toughned glass door (single leaf of any size) and refixing the same after necessary repairs with proper alignment including all T&P complete.
Providing and fixing lock of ozone/doorset make for toughened glass door of required size and design with necessary screws complete.
Providing and fixing skylight/covering of vault shaped or as directed and size as shown in the drawing of compact Polycarbonated sheet double wall double layer 6mm thick with minimum 60% transparency and UV protected of approved shade with Alcox fixing management system including EPDM gasket to supporting structural hollow MS square section of size 47.5x47.5x2.65mm complete. Polycarbonated sheet will be GE plastics (india) or equivalent as approved by Architect. Fabrication of the covering will be done from the approved fabricators. the unit rate includes the cost of all ancillary works as required for proper completion of work as per drawing, specifications and as directed by EIC. The surface area of Polycarbonated sheet skylight to be measured for payment MS tubes shall be paid separately.
Providing and fixing stainless steel matt finish cylindrical lock of approved make and quality in existing flush door with necessary screws etc. including making holes if required complete.
Providing & Fixing work top made of 25mm thick prelaminated board of approved make and quality. Peripheral edge thickness sealed with 2mm thick PVC edge banding tape of Rehau/Dolkin with hot melt glue on edge machine pressed at required temprature, complete in all respect. The work top shall be 600mm deepend to be fixed on the partitions at 750mm height from the finish floor level
Providing and laying 2.0 mm thk Antistatic Flooring of approved make, maximum width- 1.20 m, carbon thickness-0.40 micron of required colour and pattern with necessary adhessive as per manufacturer's specification complete in all respect.
Providing and fixing 8mm thick glass corners semi circular of size 300x300 and making the edges smooth with grinder and fixing the same in walls using D Brackets, screws etc. complete.
Dismantaling of works stations up to (1500mmx1500mm) along with the wooden laminated partition carefully without damaging the edges of laminate and stacked the same within 50 mtr lead. Supervising the same while loading the furniture into tempo and unloading the material at execution site including transportation within the radius of 5 KM. Refixing the workstations along with partition at proposed site with the help of L Cleats, screws, refixing the parition fixing of drawer unit, wooden coping above parition etc complete in all respect as per the direction of EIC.
Dismantling of workstation of size up to 1.5 m x 1.5 m along with dismembering of partitions, cutting of electrical wires, dismembering of glass if any, and shifting the same to the safe place complete in all respect
Dismembring of Modular partition of Size upto 1.2 m x 0.60 m workstations along with dismembering of partitions, cutting of electrical wires and refixing the same at proper place after joining with a new workstation along with necessary fittings as per the directions of Engineer In Charge. (Transportation to be paid extra, wherever required)
Providing and Fixing 8mm th. High Density Fibre (HDF) Laminated Wooden Flooring of AC-4 Grade on the hard surface with chemical adhessive, size of panel shall be 1200mm x 190mm x 8mm complete in all respect as directed by Engineer in Charge.
Providing and Fixing 30mm wide. High Density Fibre (HDF) Laminated Wooden Profile Beading of AC-4 Grade on the cut edges of the wooden flooring near doors with chemical adhessive complete in all respect as directed by Engineer in Charge.
Providing and Fixing 18-20mm wide High Density Fibre (HDF) Laminated Beading of AC-4 Grade on the common joints between flooring and skirting with chemical adhessive complete in all respect as directed by Engineer in Charge.
Providing and fixing 100mm x 12mm teak wood skirting at the bottom of wooden partition (63mm) including polishing (melamine polish) and fixing wiyh nails ,screws etc complete.
Providing & fixing L shaped modular workstation fixed on medium ht partitions (MHPs) of 60mm thk panel based partition system of 1200mm ht having approved quality Aluminium section, rigid framework. The partitions shall have two concealed raceways (at bottom and mid place) in framel and covered in extruded aluminium powder coated and ABS plastic caps. The panel should have a combination of 9mm th prelaminated soft pin up boards, and white board with matching skirtings and aluminium powder coating top trim on the top of the partition. Glass separartor of 8mm th with polished edge to be fixed between the two work tops. The work top made of 25mm thk prelaminated particle board of approved make and quality and balancing laminate of approved thickness on the unexposed surface. The work top shall be 600mm deep and are to be fixed on the partitions at 750mm ht from the FFL. All the exposed edges to have PVC edge band, the work top should be well matched in profile at corners, etc. (Size 1500 L x 1500mm W x 750mm H.) and providing pedestal drawer units of overall dimensions of 400mm width, depth 450mm and ht 725mm having 3 drawers with locking arrangement. The inner drawer should be made of prelaminated particle board of 18mm and smooth sliding telescopic arrangement. The pedestal drawer unit shall have 18mm th prelaminated matching and approved colour. The overall unit shall have adequate provision fixed underneath the work tops at desired locations, thereby also supporting the work tops at such places directly and neatly. with prefixed Keyboard Tray with Telescopic slides made up of ABS plastic body
Providing & fixing 60mm thick panel based partition system of 9mm ht. having approved quality Aluminium section, rigid frame work. The partition shall have two concealed raceways, (at bottom and mid place) in steel and covered in extruded aluminium powder coating and ABS plastic caps. The panel should have a combination of 9mm th prelaminated board, soft pin up boards, glass panel, etc. with matching skirtings and aluminium powder coating top trim on the top of the partition.
Providing and fixing 45mm thick panel based partition system of 1200mm ht. having approved quality Aluminium section, rigid frame work. The partition shall have two concealed raceways (at bottom and mid place) in steel and convered in extruded aluminium power plastic caps. The panel should have a combination of 9mm thick pre laminated board, soft pin up board etc. with matching skirtings and aluminium powder coating top trim on the top of the partition complete
Providing and fixing 10mm thick glass of size 550x400mm sep polished quarter circle shape with edge to be fixed between the two work tops with the help of SS D brackets etc.
Providing and Fixing 18mm thick prelaminated gable end fixed below the work top to balance the same. The exposed edges shall be covered and sealed with 2mm thick PVC edge bending
P/P circular meeting table of 1500 mm dia - 760 mm(ht) top made up of 19mm thick commercial block board with 2.0mm thk. top veneered, with 25×30mm second class teak moulding, finished in stained spririt polish with water proof melamine finish, resting on circular shape pedestal of 900 dia made up of 50×50 mm hard wood frame work placed at a distance of 400 – 450 mm c/c in both directions, wrapped with 3mm flexible ply in layers, laminated from outer exposed side resting on 100mm wide skirting, complete in all respect.
P/P Executive table of size 1500x750x750mm (ht) rectangular in with following components. Top made up of 30mm thick MDF board with sides from user end and visitor i.e along full length of top, ends in full round post formed in flex as per manufacturer specification and in back with balancing white, with cable manager, modesty panel 450mm wide in 18mm MDF board edges at both end full round circle post formed with flexes as per specification, resting on drawer unit and side unit at each end with provision of computer key tray. Drawer unit made up of 18mm thick MDF board Boxed from all three sides and top resting on 100mm wide recessed laminated skirting of size 300×600×760 mm (ht) with one No. drawer unit of 130mm wide running on side runner and rest in shutter (18mm MDF) with both ends half round rounded off post formed with flex as per manufactures specification and rest from inside in 1 mm white glossy laminate, complete in all respect in terms of concealed hinges, Magnet, locks, handles etc. Side units of size 1050mmX450mmX730mm made up of 18mm thick MDF board , boxed from all three sides and top divided in to two parts , all laminated with 1mm glossy white laminate from inside; with first two horizontal shelves in 12mm MDF board post formed with full round from user side with sliding shutter made up of 18mm MDF board both end half round rounded off in post forming from user side and remaining in balancing white shutter running on slide, brand hanfa on PVC guidelines and PVC channels color brown with recessed handle, key etc. complete in all respect and remaining portion under table top opened for CPU, from front side, rest boxed, laminated from inside all resting on 100mm wide laminated slarting complete in all respect in terms of accessories.
P/P Executive table of size 1800×900×750mm (ht) rectangular in with following components. Top made up of 30mm thick MDF board with sides from user end and visitor i.e along full length of top, ends in full round post formed in flex as per manufacturer specification and in back with balancing white, with cable manager, modesty panel 450mm wide in 18mm MDF board edges at both end full round circle post formed with flexes as per specification, resting on drawer unit and side unit at each end with provision of computer key tray. Drawer unit made up of 18mm thick MDF board Boxed from all three sides and top resting on 100mm wide recessed laminated skirting of size 300×600×760 mm (ht) with one No. drawer unit of 130mm wide running on side runner and rest in shutter (18mm MDF) with both ends half round rounded off post formed with flex as per manufactures specification and rest from inside in 1 mm white glossy laminate, complete in all respect in terms of concealed hinges, Magnet, locks, handles etc. Side units of size 1200mmX450mmX730mm made up of 18mm thick MDF board , boxed from all three sides and top divided in to three parts , all laminated with 1mm glossy white laminate from inside; with first two horizontal shelves in 12mm MDF board post formed with full round from user side with sliding shutter made up of 18mm MDF board both end half round rounded off in post forming from user side and remaining in balancing white shutter running on slide, brand hanfa on PVC guidelines and PVC channels color brown with recessed handle, key etc. complete in all respect and remaining portion under table top opened for CPU, from front side, rest boxed, laminated from inside all resting on 100mm wide laminated slarting complete in all respect in terms of accessories.
Storage unit/Side cabinet, filling cabinets consisting of 19mm thick commercial board structure, partitions, shelves, back with top moulding of 40x40mm and skirting of size 12x100mm with moulded edge. The shutters of divisions as per design shall be made of 1.0mm laminate and shutter edges to have 32x12mm moulding all around. Drawers construction shall be similar to that of the table. All exposed surface, top sides, finished in 1.0mm lamination of approved shade and texture. Brass hinges, brass ball catcher, locks to all shutters, melamine water cut matt finish, complete as per details (ii) 1050x450x730mm
FMC (Low ht.) Providing making and fixing filing cabinets firmly fixed to the wall / partition and grouted to floor, 375 -450 mm deep comprising of 19 mm commercial board for shelves, bottom, shutters, apron, with all exposed of the cabinet with 1.0mm thk. lamination as per approved texture design including skirting 75 to 100 mm high laminated, all cut edges of shutter to have 25x12mm moulded teak lipping, All hardware of brass plate hinges, locks, with all wooden surface to be stained spirit polished with melamine finish. Interior of the Cabinets to have 3 coats of synthetic enamel paint with a coat of primer and back side should have 9 mm thick ply with primer. (measurement will be made for front elevation of the cabinet) a) 19 mm commercial board top with 1.0 mm thk. laminate
FMC (fl to ceiling) Providing making and fixing filing cabinets firmly fixed to the wall / partition and grouted to floor, 375 -450 mm deep comprising of 19 mm commercial board for shelves, bottom, shutters, apron, with all exposed of the cabinet with 1.0mm thk. lamination as per approved texture design including skirting 75 to 100 mm high laminated, all cut edges of shutter to have 25x12mm moulded teak lipping, All hardware of brass plate hinges, locks, with all wooden surface to be stained spirit polished with melamine finish. Interior of the Cabinets to have 3 coats of synthetic enamel paint with a coat of primer and back side should have 9 mm thick ply with primer. FMC (fl to ceiling) (measurement will be made for front elevation of the cabinet) a) 19 mm commercial board top with primer
CONFERENCE ROOM TABLE.: Conference room table oval shaped, consisting of the followings: Top is made of 19mm comm grade board, with base frame of treated wood of size 50x 40 mm at nominal distance of 550-600mm in both directions. The table top is to have edging of moulded second class teak of size 45 x 60mm all along the length of the top, is to be rendered with 1.0 mm th. lamination of approved shade as directed. The base pedastal is 'T' shaped -2 nos., fixed to the frame work of table top, comprises of hard wood framework of size 32x40mm at 450-500 c/c, with extra frame at the rounded edges, and at the skirting lvl., The frame work of the base pedastal is to have 19mm block board onto both sides of frame work, with t.w. moulded edge frame of size 70mm x 40mm at the vertical and the bottom edge. the exposed surface is to be rendered with 1.0 mm lamination of approved shade and texture.The table is to have stained spirit polish with water cut melamine finish. (ii) OVERALL SIZE 2100X 1050X750MM HIGH
Conference Table: (3000x1000x750): S&I Conference Rm. Table 40 mm thk formed out of 19 mm thick board top and 6mm thk ply bottom with filler piece to achieve 40mm thk. All edges to be strengthen in requisite width to form a profile of 40mm edges to receive moulding out of wood 40x40 mm matching to veneer as per detail and approval of Client. Top shall be finished in patterned veneer with grains/inlays as per details with 3 or more coats of melamine spray polish and fixed on drum pedestals as per design and detail of architect.
P/P drawer unit of size 415×450×730mm (ht) made up of 18mm thick MDF board, boxed from all three sides and top inside laminated with 1.0mm white glossy with one 150mm wide (Fascia) drawer on top on runner and remaining single shutter edges rounded off with all exposed surface post formed with flex as per manufacture specification of approved shade and rest from inside with balancing white as per manufacturer specifications resting on 100 mm wide recessed skirting , complete in all respect in terms of concealed hinges, handles, magnets locks etc.
P/P drawer unit of size 415×450×730mm (ht) made up of 18mm thick MDF board, boxed from all three sides & top. Inside laminated with 1.0mm white glossy with single shutter edges rounded off, exposed surface post formed with flex as per manufacture specification of approved shade and rest from inside with balancing white as per manufacturer specifications resting on 100mm wide recessed laminated skirting with one intermediate horizontal shelf, complete in all respect in terms of concealed hinges, handles, magnets locks etc. (Make: Godrej/Hettich))
P/P drawer unit of size 770×450×730mm (ht) made up of 18mm thick MDF board, boxed from all three sides & top, inside laminated with 1.0mm white glossy, Double Shutter, edges rounded off exposed surface post formed with flex as per manufacture specification of approved shade and rest from inside with balancing white as per manufacturer specifications resting on 100mm wide recessed laminated skirting with one intermediate horizontal shelf, complete in all respect in terms of concealed hinges, handles, magnets locks etc. (Make: Godrej/Hettich))
Providing and fixing and placing in position three drawers unit of size 415x450x725mm inlcuding hardware fitting half crank hinges brass handle multipurpose lock Godrej/Hettich make drawer channel etc. all complete as per item Nos 60-62 and as directed by EIC.
Providing & Fixing work top made of 25mm thick prelaminated board of approved make and quality. Peripheral edge thickness sealed with 2mm thick PVC edge banding tape of Rehau/Dolkin with hot melt glue on edge machine pressed at required temprature, complete in all respect. The work top shall be 600mm deepend to be fixed on the partitions at 750mm height from the finish floor level
Supply & laying of aluminium /GI floor race way of size 100X50 mm imbeded in floor including cutting of PCC & cover the same with semi finish
Making core cutting of size 1 inch to 06 inch in dia in RCC slab /wall for cable entry.
Supplying of RCC post/peg for fixing at each corner of vacant plot. The rate is inclusive of RCC 1:1.5:3, Reinforcementsteel, painting and shuttering complete and transportation of the Signages to various plots for fixing as per direction of EIC
Providing and fixing CPVC MTA / FTA brass socket / elbow of approved qualityfor CPVC pipe fittings :25 mm nominal bore
Supply & installation of white vitreous china Urinals with integrated EFS for automatic flushing of approx. size 295 x 325 x 575 mm water having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification & direction of Engineer-in-charge. Flat Back Urinal Basin: Make : Hindware, Model : Flow with Integreated Sensor, Cat. No. : 60021, Colour : White.
Providing and fixing brass sensor pillar cock of approved quality: 15 mm Nominal bore. MAKE : HINDWARE, Model : Flora, Cat. No. : F240008CP
Supplying and stacking of maufactured sand (C & D Waste)
Structural steel work riveted, bolted or welded in builtup sections for Fabrication of available steel including Carriage,manpower etc.
Collecting the existing gravel stones from yard, stacking the same outside the yard and respreading in the yard after cleaning the gravels and removing the dust inlcuding removing/cleaning of vegetation complete in all respect as per direction of EIC. (Anti Weeding chemical will be paid extra).
Providing and fixing Sensor based Urinal including cutting and making good the walls wherever require: White Vitreous China Urinal size 290x325x575 mm as per direction of EIC
Removing the existing rain water pipe for repairing the damage parapet wall and refixing the same including painting work on existing Z angle and the arrangement of scaffolding with complete in all respect . ( Note - New fittings will be paid separately )
Providing and fixing Brass Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore
Providing and fixing 10 mm thick toughened glass in door, Window, partition with PVC/ neoprene gasket etc. complete as per the architectural drawings or required design and pattern and the directions of engineer-in-charge.
Providing and applying Epoxy coating on concrete flooring as per following sequence and specification. (1). Water and oil telerant concrete sealer with preparation up to 50 mm. (2). Moisture tolerantprimer for concrete flooring and walls of DFT 100 Micron. (3). High strength and heavy duty screed DFT 1mm. (4). High performance Epoxy top coat DFT 1mm. The entire work to be carried out as per standards and specifications of contact given in special conditions in contract including
Providing and applying top coat of Epoxy coating on existing Epoxy surface after grinding the same in all respect. High performance Epoxy top coat DFT 1mm. The entire work to be carried out as per standards andspecifications of contact given in special conditions in contract including grinding and preparation of surface, remocal of oil deposits complete and nothing extra shall be payable.
Providing and fixing vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) of approved make in all shades of any size as approved by En gineer-in-Charge, in skirting , risers of st eps and dados over 12 mm thi ck bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Size of Tile 600 x 1200 mm). kajaria make
Providing and fixing wash basin (Hindware Basin Elegance) with 15mm Pillar cock Jaquar make of Cat no. CHR 5011, 32mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. with the help of plumber and helper etc complete as per the direction of EIC(Size - 560 x 400mm)
Providing and fixing C.P. brass bib cock 15mm nominal bore : Jaguar make (VGP-5037)
Provide & Fixing of Jaquar Sensor Tap for Wash Basin with 175mm Extension Body with all necessary accessories complete including cutting, making good the walls, floors, slab wherever required as per direction of Engineer-In charge. all complete., JAQUAR Model: SNR-CHR-51021
Providing and fixing 5mm thick mirror glass with back side frame in PVC board including LED strip all around the frame automatic touch sensor complete in all rerspect as per direction of EIC's.
Providing & Fixing for converting the urinals in waterless urinals complete in all rerspect as per direction of EIC's, with all necessary accessories.
Providing and fixing soil,waste and vent pipes of app. make. i/c filling joints with adhessive solution. PVC pipe 300 mm dia.
Providing and fixing 300mm dia pvc bend / socket with or without door of app. Make i/c adhesive , etc. completed.
"Providing and fixing PVC Flutted panel of size 2.9x0.115 m for panelling over wall including finishing the edges with appropriate beading/margins, providing proper cutout of electrical fittings/ accessories etc. complete as per the direction of EIC. ( Mode of payment:- Only finished area of panelling will be measured for payment)"
Disposal of good earth by mechanical means, including loading, transporting, unloading upto any lead as per concerned EIC)
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 75mm average thickness
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 50mm average thickness
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 25mm average thickness
Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia. (approved make HILTI).
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make
Cutting of RCC slabs/beams up to a depth of 150mm using heavy-duty diamond saw cutters or any other suitable method without damaging the adjacent concrete and supporting the cut slabs/beams to avoid falling. The rate includes making precise, clean cuts through concrete and embedded steel reinforcement including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Design & detailing, testing and installation of appropriate sizes of reinforcement anchorages or splices fixed into existing hardened concrete by injecting adhesives in drilled holes after cleaning of the holes to connect new reinforcement to existing walls and slab. BA shall visit the site and collect necessary details required for carrying out the work and submit complete proposal for TPDDL approval before execution of work at site. (approved make HILTI) - 16 to 28 dia. bar
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.- Group A
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.-Group B
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required-Group C
Wiring for light point /fanpoint/exhaust fan/call bell point with 1.5 Sq mm PVC insulated copper conductor wires in recessed/surface PVC conduite,with modular switch,modular plate,suitable G.I box and earthing the point with 1.5 sq mm copper conductor wire etc as required. (Excluding of Ckt wiring from D.B to switch boards)Single light point controlled by a 6Amps modular type switch.(e) Three light points controlled by a 6Amps modular type switch.
Wiring for light point /fanpoint/exhaust fan/call bell point with 1.5 Sq mm PVC insulated copper conductor wires in recessed/surface PVC conduite,with modular switch,modular plate,suitable G.I box and earthing the point with 1.5 sq mm copper conductor wire etc as required. (Excluding of Ckt wiring from D.B to switch boards)Single light point controlled by a 6Amps modular type switch.(f) four light points controlled by a 6Amps modular type switch.
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 1X 1.5 Sqmm
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 3 X 1.5 Sqmm
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 3X 2.5 Sqmm
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 3X 4 Sqmm
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. 3X 6 Sqmm
WIRING 4x10+2x10 sq mm Supply and drawing of following sizes of PVC insulated stranded copper conductor wires of 1100 Volts grade in existing conduit, pipe including connection/termination etc as required.(e) 4x10+2x10 sq mm
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 16 sq. mm + 2 X 6 sq. mm earth wire
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 40 mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 50 mm
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 2 way 5/6 amps switch
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1 -2 Module
Supply and fixing of 6/16 Amp switch, sockets of MK make modular type in PVC/GI box complete in all respects with testing & commissioning.
SWITHCHED SOCKET OUTLETS (6 A AND 16 A) Supplying and fixing of a set of 2 Nos 6 A Socket outlets and one no 16 A Socket controlled by 16 A Master Switch of MK make including GI/PVC box, connections complete in all respect
SWITHCHED SOCKET OUTLETS (6 A) A set of 2 Nos. 6 A switched socket outlets (FOR UPS )in a box, with providing & fixing 2 nos. 2/3 pin 6 A switches & socket outlets( But switch& socket should be at defferent possition or as required)..
Supply & fixing of a set of one 6 amp switch & socket of modular type with suitable size G.I box.
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as requireds
INDUSTRIAL SOCKET OUTLETS (25/32A DPMCB) Supply, installation, testing & commissioning of industrial type plug and socket outlet with SP/TPN MCB (10 KA motor duty) mounted on a sheet steel enclosure including termination, earthing etc as required . (b) Supply and fising of 25/32 Amp DP MCB (C series) of approved make in MS enclouser
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB omplete with connections, testing and commissioning etc. as required. Single pole
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps MCB four pole.
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts “C” curve DP MCB complete with connections, testing and commissioning etc. as required.
Supplying and fixing TP sheet steel enclosure on surface/ recessed along with 16/25/32amps 415 volts “C” curve TP MCB complete with connections, testing and commissioning etc. as required.
Supply & fixing of single phase 3-pin 32 Amp ratting floor mounted industrial sockets weather proof IP 67 of Legrand/Neptune /Balls make complete pair with male & female type plug & socket arrangement.
Supply & fixing of 63 Amp 3 phase 5 pin IP 65 industrial socket with top & complete with enclouser & 3 phase MCB of 63 amp ratting of HAGER / Legrand /L&T /Merlingerin make
Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A, “C” curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, EArth bar, din bar, detachable gland plate, interconnections, powder painted including EArthing etc. as required.(But without MCB/ RCCB/ Isolator) 4 way (4 + 12), Double door
Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, EArth bar, din bar, detachable gland plate, interconnections, powder painted including EArthing etc. as required.(But without MCB/ RCCB/ Isolator) 6 way (4 + 18), Double door
Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, EArth bar, din bar, detachable gland plate, interconnections, powder painted including EArthing etc. as required.(But without MCB/ RCCB/ Isolator) 8 way (4 + 24), Double door
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, EArth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4 + 36), Double door
Providing and fixing following rating and braking capacity and 3 pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.125 Amp, 16 KA,TPMCCB
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door
Supplying and fixing following way prewired SP&N MCB distribution board of steel sheet for 240 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) 8 way, Double door
Supplying and fixing following way prewired SP&N MCB distribution board of steel sheet for 240 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) 16 way, Double door
Supply, laying & fixing of following sizes of Cu/GI strip/wire clamped to walls, cable trays etc for equipment/ System earthing complete as required including inter connection between length at joints, all fixing accessories saddles, clamps etc and other fixing hardware material as required for proper installation.8 SWG G.I Wire
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Supply, Installation, Testing & Commissioning of Advance Miantenance Free Chemical Earthing System of 10 feet length, 63mm dia, 2 mm thick electrolytic grade copper tube duly filled with conducting chemicalswith the permenant sealings at the both the ends with the lead terminal at the top along with 50 Kgs a chemical GEM to retain the life span of 15 years with the heavy duty poly plastic earth pit cover. The chemicalearthing system should be fabricated with earthing electrode and back fill compund which has the capability to enhance the ground connectivity. The connectivity should be extended to the place of equipment thorugh the copper strip which will be burried under ground.The specification of the electrode are as under a) Electrode should be 3 meter long 63mm thick in diameter =0 1 no B) Should be made of galviinsed steel (90-100) microns with pipe in pipe technology C) Annular space filled with high conductive and anti corrosive withhigh conductive and anti corrosive crystalline conductive mixture D) Should be strong and corrosion resitant E) Manufactured in accordance with PS 3043-1987 (Code of pratice ofearthing) F) Electrode should be dug in ground Sralong with soil friendly, moisture retaining back fill compound which has capability to enhance groundconductivity (min 125Kg of back fill compund for earthing system) G) The result should be below 1 Ohm in any case .
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor armoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardwareetc as required. c ) 3 core 2.5 Sq mm Copper armoured XLPE cable
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor armoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardwareetc as required. c ) 3 core 4 Sq mm Copper armoured XLPE cable
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor armoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardwareetc as required. c ) 3 core 6 Sq mm Copper armoured XLPE cable
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated Aluminium conductor armoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. b) 3 core 6 Sq. mm Aluminium
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated Aluminium conductor armoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. a) 2 core 10 Sq. mm Aluminium
Supplying and laying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required. 3 C x 10 Sq.mm
4CX10sq mm Aluminium "Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated Aluminium conductor armoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. b ) 4 core 10 Sq mm Aluminium
4CX16 sq mm Aluminium "Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated Aluminium conductor armoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. c ) 4 core 16 Sq mm Aluminium
4CX25 sq mm Aluminium "Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated Aluminium conductor armoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. c ) 4 core 25 Sq mm Aluminium
4CX35 sq mm Aluminium "Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated Aluminium conductor armoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. c ) 4 core 35 Sq mm Aluminium
Supplying and laying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required. 4 C x 50 Sq.mm
Supplying and laying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required. 4C x 95 Sq.mm
Supplying and laying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required. 4 C x 185 Sq.mm
Supplying and laying of following sizes of 1.1 KV grade multicore aluminium conductor XLPE insulated armoured cable conforming to IS:7098 (Part - I) complete with all amendments etc. as required. 4 C x 300 Sq.mm
Laying and fixing of one number PVC insulated and PVC sheathed/XLPE Power cable1.1 KV aluminium conductor cable of sizes direct in Ground including excavation , sand cushoning protective covering and refilling the trunch etc in as required; Upto 25 sq. mm
Laying and fixing of one number PVC insulated and PVC sheathed/XLPE Power cable1.1 KV aluminium conductor cable of sizes direct in Ground including excavation , sand cushoning protective covering and refilling the trunch etc in as required; Above 25 sq. to 120 sq. mm
Laying and fixing of one number PVC insulated and PVC sheathed/XLPE Power cable1.1 KV aluminium conductor cable of sizes direct in Ground including excavation , sand cushoning protective covering and refilling the trunch etc in as required; Above 120 sq. mm to 400 sq. mm
Laying and fixing of one number PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, of following sizes on surface as required:- Upto 25 sq. mm
Laying and fixing of one number PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, of following sizes on surface as required:- Above 25 sq. to 120 sq. mm
Laying and fixing of one number PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, of following sizes on surface as required:- Above 120 sq. mm to 400 sq. mm
Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes in the existing RCC/ HUME/ STONEWARE/ METAL pipe as required:- Upto 25 sq. mm
Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following sizes in the existing RCC/ HUME/ STONEWARE/ METAL pipe as required:- Above 25 sq. mm to 400 sq. mm
Supply and making end termination with brass double compression glands and aluminium lugs for PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade of the following sizes as required:- 3 C x 10 Sq.mm
Supply and making end termination with brass double compression glands and aluminium lugs for PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade of the following sizes as required:- 4 C x 10 Sq.mm
Supply and making end termination with brass double compression glands and aluminium lugs for PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade of the following sizes as required:- 4 C x 16 Sq.mm
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. End termination 4 X 25 sq. mm (28mm)
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. End termination 4 X 35 sq. mm (32mm)
Supply and making end termination with brass double compression glands and aluminium lugs for PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade of the following sizes as required:- 4 C x 50 Sq.mm
Supply and making end termination with brass double compression glands and aluminium lugs for PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade of the following sizes as required:- 4 C x 95 Sq.mm
Supply and making end termination with brass double compression glands and aluminium lugs for PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade of the following sizes as required:- 4 C x 185 Sq.mm
Supply and making end termination with brass double compression glands and aluminium lugs for PVC insulated and PVC sheathed aluminium conductor cable of 1.1 KV grade of the following sizes as required:- 4C x 300 Sq.mm
Supply and fixing of 36 watt T8 or 28 watt T5 lamps in existing light fixtures.
Supplying and Fixing of Flood light of philips Out door type BRP 022 LED - 21 watt LED street light fittings of Philips including GI pipe for mounting the light and accessories like clamps, bolt, nut etc with testing and commissioning in all respect.
Supply, storing, fixing, assembling, testing and commissioning of following light fixtures (Recessed/ surface/ceiling/Wall mounted) and fans complete with down rods, chain hangers, lamps, power factor improvement capacitors, ballts etc and all necessary accessories complete as required. b) 1x 20 Watt LED wall light model type 31081 4 feet long Fixture of philips surface mounted type ,
Supply, storing, fixing, assembling, testing and commissioning of following light fixtures (Recessed/ surface/ceiling/Wall mounted) and fans complete with down rods, chain hangers, lamps, power factor improvement capacitors, ballasts etc and all necessary accessories complete as required. b) 1x 10 Watt LED wall light model type 31081 2feet long Fixture of philips surface mounted type ,
Supply, storing, fixing, assembling, testing and commissioning of following light fixtures (Recessed/ surface/ceiling/Wall mounted) and fans complete with down rods, chain hangers, lamps, power factor improvement capacitors, ballasts etc and all necessary accessories complete as required. surface mounted. LED philips lighting Sereno LED /SP 824 P LED 29S-5000 GR OD,
Supplying & Installation of lighting fittings/ fixtures complete with special electronics low loss ballast/ lumilux tube/ lamp/ condenser/ starter /louvers/ reflector/cover etc. complete as required:- Recessed mounted fitting with 1 x 12 Watt, LED Light (Make:-Philips CAT No. DN192B-LED9S-6500 PSU WH) or equivalent.
Supplying & Installation of lighting fittings/ fixtures complete with special electronics low loss ballast/ lumilux tube/ lamp/ condenser/ starter /louvers/ reflector/cover etc. complete as required:-Recessed mounted fitting with 1 x 12 Watt, LED Light (Make:-Philips CAT No. DN193B-LED12S-6500 PSU WH) or equivalent.
Supplying of lighting fittings/fixtures complete with special electronics low loss ballast/ lumilux tube/ lamp/condenser/ starter/louvers/reflector/cover etc. complete as required.Supply of Recessed mounted , minimum 600 lumens LED light fitting complete as required.,, (Philips : Green LED Ultima Circular DN091B LED6S-6500 PSU WH orEquivalent),,
Supplying & Installation of lighting fittings/ fixtures complete with special electronics low loss ballast/ lumilux tube/ lamp/ condenser/ starter /louvers/ reflector/cover etc. complete as required:-Surface mounted circular fitting with 1 x 13 Watt LED Light (Make:-Philips CAT No. BBS313 1xDLED-5000 WH) or equivalent.
Supplying & Installation of lighting fittings/ fixtures complete with special electronics low loss ballast/ lumilux tube/ lamp/ condenser/ starter /louvers/ reflector/cover etc. complete as required:- Recessed mounted fitting with 36 Watt, LED Panel Light, direct-indirect lighting luminaire with special seamlessly integrated frame and full Opal Acrylic Diffuser (OAD) (Make:-Philips CAT No. 2' x 2' LED-RC380B LED36S4000 or equivalent
Supplying & Installation of lighting fittings/ fixtures complete with special electronics low loss ballast/ lumilux tube/ lamp/ condenser/ starter /louvers/ reflector/cover etc. complete as required:- Surface mounted fitting with 1 x 12 Watt, LED surface Light Square (CW) (Make:-Philips Square panel LED Light)
Supplying and Fixing of Flood light of philips Out door type BVP161 30 watt LED street light fittings of Philips including fixing clamp ,accessories like clamps, bolt, nut etc with testing and commissioningin all respect.
Retrofitting of existing recessed type light fixtures T8/T5 2X36 /40 watt by LED lamps of 2 X 18 watts of philips complete with retrofitt arrangement.
Retrofitting of existing recessed type light fixtures T8/T5 1 X36 /40 watt by LED lamps of 1 X 18 watts of philips complete with retrofitt arrangement.
Supply & fixing of Philips / Wipro / 3M , warm white colour LED light strip 5 watt per meter ,complete with power supply adopter etc.
Suspended type 8 ft, minimum 5400 lumen Supplying of lighting fittings/fixtures complete with special electronics low loss ballast/ lumilux tube/ lamp/condenser/ starter/louvers/reflector/cover etc. complete as required.Supply of suspended type 8 ft, minimum 5400 lumens LED light fitting with continuous interconnection feature, complete as required.,, (Regent Slash 28W or Equivalent),, Complet with suspention arrangement & clamps etc
Recessed type 8 ft, minimum 5400 lumen Supplying of lighting fittings/fixtures complete with special electronics low loss ballast/ lumilux tube/ lamp/condenser/ starter/louvers/reflector/cover etc. complete as required.Supply of suspended type 8 ft, minimum 5400 lumens LED light fitting with continuous interconnection feature, complete as required.,, (Regent Slash 28W or Equivalent),, Complet with suspention arrangement & clamps etc
Supplying and fixing of 250 mm dia exhaust fan with louvers and bird screen of PVC body in existing opening with 900 rpm (Approved make) of 250 mm dia .
Supplying and fixing of exhaust fan with louvers and bird screen of PVC body in existing opening with 900 rpm (Approved make) b) 305 mm dia
Supplying and fixing of 305 mm dia exhaust fan with louvers and bird screen of MS body in existing opening with 1400 rpm (Approved make) of 305 mm dia
Heavy duty Exhaust fan 450 mm dia Supplying and fixing of size of exhaust fan with louvers and bird screen of Heavy duty of MS body in existing opening with 1400 rpm (Approved make) b) 450 mm dia(1400 rpm)
Stainless Steel cover-Supplying and installation of following sizes 2.0 mm thick 4 way GI boxes with 2.0 mm thick Stainless Steel cover and fixing SS hardware in recess/ on surface including chasing the wall/floor complete as required. A) 200 x 200 x 50-75 mm
Supply & fixing of 2 to 3 mm thick SS plates of size 300 X300 mm complete drilling the holes finishing & polishing the same
Supply & laying of aluminium /GI floor race way of size 100X40 mm imbeded in floor including cutting of PCC & cover tge same with semi finish
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required 150 mm width X 50 mm depth X 1.6 mm thickness.
Fabricating & installing perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required including GI C Channe supports of 300 mm width x 50 mm depth x 2 mm thickness (/SLOTCO BEECO /RICHO Steel)
Fabricating & installing perforated GI cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required including GI C Channe supports of 450 mm width x 50 mm depth x 2 mm thickness (SLOTCO BEECO /RICHO Steel)
Providing and fixing of Fan Hook in existing Slab including cutting cement concrete and making good the same.
Installation,fixing,testing,comissioning & assembeling the street light 70 watt/120 Watt/ 150 watt/250/400 watt Normal OTR LED fittings complete with inter connection of blasst ,starter /iginator and lamp etc (Fittings with parts are supplied by TPDDL at site).
Supply & fixing of 1-1/2 inch dia GI pipe medium class 750 mm to 1000 mm long, light fittings mounting brackets with 02 no mounting clams complete with nut bolt &washer etc
Providing & installation (laying) of PVC insulated un armoured cable of 1.5 Sq mm 2 core including termination connection etc
Supplying and fixing Testing & commissioning with cable connection / termination of 200 mm x 160 mm x 98 mm (inner size) Pole Box made of polysterene thermoplastic having shock proof, bweather proof, rust proof, water proof (conforming to IP-65) enclosure having suitablesize knock outs for cable entry in surface/recess of wall or on existing pole with 2 nos. of G.I. Clamps including 6 /10A SPMCB & 3 nos. Connectors suitable for 6/16/25 sq.mm. XLPE insulated cable for looping in and outwith branch out suitable for 2.5 sq.mm. PVC insulated wire including interconnections etc. as required.
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.2 way 5/6 amps switch.
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.15/16 amp switch
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 amp Socket.
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.6 pin 15/16 amp socket outlet
HYLEM SHEET:75mm X75 mm"Supplying and fixing following size ,3mm thick hylem sheet with brass screw on existing metal boxes including cutting and fixing of switches and sockets (a) 75 mm x 75 mm"
HYLEM SHEET:100 mm X100 mm "Supplying and fixing following size ,3mm thick hylem sheet with brass screw on existing metal boxes including cutting and fixing of switches and sockets(b) 100 mm x 100 mm"
HYLEM SHEET:150 mm X75 mm "Supplying and fixing following size ,3mm thick hylem sheet with brass screw on existing metal boxes including cutting and fixing of switches and sockets (c) 150 mm x 75 mm"
HYLEM SHEET:150 mm X150 mm "Supplying and fixing following size ,3mm thick hylem sheet with brass screw on existing metal boxes including cutting and fixing of switches and sockets (d) 150 mm x 150 mm"
HYLEM SHEET:180 mm X100 mm"Supplying and fixing following size ,3mmbthick hylem sheet with brassbscrew on existing metal boxes includingbcutting and fixing of switches and sockets (e) 180 mm x 100 mm"
HYLEM SHEET:200 mm X125 mm "Supplying and fixing following size ,3mm thick hylem sheet with brass screw on existing metal boxes including cutting and fixing of switches and sockets (f) 200 mm x 125 mm"
HYLEM SHEET:200 mm X150 mm "Supplying and fixing following size ,3mm thick hylem sheet with brass screw on existing metal boxes including cutting and fixing of switches and sockets (g) 200 mm x 150 mm"
HYLEM SHEET:200 mm X250 mm "Supplying and fixing following size ,3mm thick hylem sheet with brass screw on existing metal boxes including cutting and fixing of switches and sockets(h) 200 mm x 250 mm"
HYLEM SHEET:200 mm X300 mm "Supplying and fixing following size ,3mm thick hylem sheet with brass screw on existing metal boxes including cutting and fixing of switches and sockets-(i) 200 mm x 300 mm
HYLEM SHEET:250 mm X300 mm "Supplying and fixing following size ,3mm thick hylem sheet with brass screw on existing metal boxes including cutting and fixing of switches and sockets-(j) 250 mm x 300 mm"
Supply and laying of 25 mm Dia PVC flexible conduits complete with dressing and fixing etc,
PVC Insulated copper Arm. Cable 1.5 SQ.MM. 2 Core Providing & Installation of PVC insulated Copper armored cable 1.5 sq. mm 2 core including termination connections etc. as required.
Manual Call Box Providing & Fixing of manual call box in suitable enclosure with arrangements to raise the alarm when the glass is manually broken, complete as required
Electronic Fire Hooter Providing & Fixing electronic fire hooters of 120dB sound level, suitable for mounting, complete as required.
Blinking Type Smoke Detector Providing & Fixing of Blinking type Smoke Detector (Dual chamber lonisation type with mounting base, complete as required.
Blinking Type Photoelectric Smoke Detector Providing & Fixing of Blinking type photo Electric type Smoke Detector with mounting base etc. complete as required.
Blinking Type Fixed Temperature Heat Det Providing & Fixing of Blinking type Rate of Rise cum Fixed Temperature Heat Detector with mounting base etc. complete as required.
Fire Detection Panel 3-6 Zones Providing, Fixing and commissioning the new fire detection panel of similar specification complete in all respect for: 3 to 6 Zone Micro-processor based fire alarm panel with made of 16 SWG CRCA Sheet with hinged front cover and acrylic sheet in the front with locking arrangement and inbuilt battery Box, comprising of Audio/visual alarm Indication of fire & fault etc, with Control panel consisting 8 bit system CPU 11.0592 MHz WDT processor, 16 X 4 line LCD display, time and date on LCD, complete with 100 event data logger with date and time stamp, optional serial direct thermal dot line printer connectivity with 48mm print width, indications for fire, fault, mains power and battery. The panel shall also contain annunciation window type indicators for fire and fault. Panel should support a) RS 485 serial communication mode for active repeater b) TCP/IP converters for centralized monitoring of the panel from any remote PC c) ATX key board support for field programming d) PA system connectivity for announcement and alerting. The panel shall contain built-in battery charger and battery space for 2 X 12V, 7Ah maintenance free battery (Exide/ Panasonic) for 6 hrs back up in normal case and 30 min back up in case of alarm. (Approved Make: Honeywell/Agni Suraksha(Datatakex) / Safeway /System Sensor)
Please consider as following : Response indicator with twin transparent LED that shall glow red in case of fire.
MS galvanized boxes - used as the base of the detector installed at the ceiling
supply & fixing of MINILEC make single phase suitable up to 32 Amp auto transfer switch complete with auto / adjustable timer for auto ON/OFF one by one each AC units as per timer setting , suitable for server rooms AC units
Supplying and fixing 125 amps 4 pole change over switch HPL complete with enclouser & operating Handle ……
Supplying and fixing 63 amps TPN (4 Pole )change over MCB ..……
Supplying and fixing of 8 Module Pop-up Box consisting of 02 No 06 Amp sockets ,02 No LAN connector & 02 No VGA cable connector.
Supplying and fixing of double pole 40 /63 amps rating, 240/415 volts, #C# curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB omplete with connections, testing andcommissioning etc. as required 40/63 Amp DP MCB
Supply, storing, fixing, assembling, testing and commissioning of following light fixtures (Recessed/ surface/ceiling/Wall mounted) and fans complete with down rods, chain hangers, lamps, power factor improvement capacitors, ballasts etc and all necessary accessories complete as required. b) 1x 36 Watt LED wall light model type 4 feet long Fixture surface mounted type ,
LED CW MR PSU GR DX)Providing and fixing 70 Watt LedStreet Light with existing Pipe/Fixingarrangement - Philips Make (BRP032LED CW MR PSU GR DX)Street Light with existing Pipe/Fixingarrangement - Philips Make (BRP032LED CW MR PSU GR DX)
Providing and fixing of 125 watt street light including suitable support pipe and proper fixing arrangement with the help of welding/Nut bolt as per requirement.- Havells Make Cat No. Endura Omni Pluss L 120 W LED 757 SAS YTO
Supplying & Installation of lighting fittings/ fixtures complete Recessed mounted fitting with 1 x 10 Watt, Round/square LED Downlighter (Make:-Philips Astra Sleek) or equivalent
Supplying & Installation of lighting fittings/ fixtures complete Recessed mounted fitting with 1 x 15 Watt, Round/square LED Downlighter (Make:-Philips Astra Sleek) or equivalent
Supplying & Installation of lighting fittings/ fixtures complete with Recessed mounted fitting with 1 x 18 Watt, Round/square LED Downlighter (Make:-Philips Astra Metallica) or equivalent
Supply, installation & testing of Single head black and golden finish metal body Dome Pendant ceiling suspended light(400MM Dia) along with one no.12 watt LED warm white bulb,black finish base and suitable length of hanfing cable.
Supply, installation & testing of Single head black and golden finish metal cutted hanging light (6 inch dia) along with one no.12 watt LED warm white bulb,black finish base and suitable length of hanfing cable.
Supply, installation & testing of Single head golden finish metal body and glass reflector along with one no.12 watt LED warm white bulb,black finish base and suitable length of hanfing cable and hanging chain etc.
Providing fixing of Ultra Line LED hanging light 3000/4000K aluminium black finish frame complete with adapter,adaptor box and suitable hanging arrangement
Providing fixing of 1x4 foot 36 watt recessed mounted LED Panel light along with necessary connection, clip, hanging chain/ GI wire , fastener etc. complete with all required T& P and as per direction of EIC.Model no-RC360BLED36S-6500 L120W30 PSU OD
Providing and fixing following rating and braking capacity and 3 pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 Amp, 16 KA,3 pole MCCB
Providing and fixing following rating and braking capacity and 3 pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.125 Amp, 16 KA,3 pole MCCB
Providing and fixing following rating and braking capacity and 3 pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.160 Amp, 16 KA,3 Pole MCCB
Providing and fixing following rating and braking capacity and 4 pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 Amp, 16 KA,4 Pole MCCB
Providing and fixing following rating and braking capacity and 4 pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 Amp, 16 KA,4 Pole MCCB
Providing and fixing following rating and braking capacity and 4 pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 160 Amp, 16 KA,4 Pole MCCB
Providing and fixing of 100 Amp 4pole 16KA MCCB including Copper Link and suitable size Ms painted Enclosure- Hager Make
Providing and fixing of 125 Amp 4pole 16KA MCCB including Copper Link and suitable size Ms painted Enclosure- Hager Make
Providing and fixing of 160 Amp 4pole 16KA MCCB including CopperLink and suitable size Ms painted Enclosure- Hager Make
Providing and fixing of One set (4 Nos.) Copper spreader link for MCCB suitable up to 200 ampere current carring capacity
Supplying and fixing of 16 amps to 32 amps rating, 240 volts, “C” curve,Double pole Modular MCB including suitable size of modular base &Cover plate and PVC/ GI Box complete with connections, testing and commissioning etc. as required.
Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. asrequired.
Supply, fixing & testing with commissioning of convactional type RE 428 optical BEAM detectors of RAVEL make for detecting smoke along with integration ,cable connection with fire alarm panel including SMPS.
Supplying and fixing 40/63 Amp rating, 415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor unarmoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. c ) 3 core 1.5 Sq mm Copper unarmoured XLPE cable
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor unarmoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. c ) 3 core 2.5 Sq mm Copper unarmoured XLPE cable
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor unarmoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. c ) 3 core 4.0 Sq mm Copper unarmoured XLPE cable
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor unarmoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. c ) 3 core 6.0 Sq mm Copper unarmoured XLPE cable
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor unarmoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. c ) 4 core 2.5 Sq mm Copper unarmoured XLPE cable
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor unarmoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. c ) 4 core 4.0 Sq mm Copper unarmoured XLPE cable
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor unarmoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardware etc as required. c ) 4 core 6.0 Sq mm Copper unarmoured XLPE cable
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor armoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardwareetc as required. c ) 4 core 2.5 Sq mm Copper armoured XLPE cable
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor armoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardwareetc as required. c ) 4 core 4 Sq mm Copper armoured XLPE cable
Supply, laying, testing and commissioning of following sizes of PVC sheathed PVC insulated copper conductor armoured cable 1.1 KV grade on wall, or in existing cable tray / wall /hume pipe with fixing hardwareetc as required. c ) 4 core 6 Sq mm Copper armoured XLPE cable
VTPN DB (ACDB):8W TPN Supply, installation,testing and commissioning of following double door type distribution board fabricated out of 16 SWG ,CRCA sheet steel recrssed in wall or surface mounted.8 way TPN AC DB double door type (IP 43),consisting of one no 100 Amp TPN MCCB (10 KA/16KA) as incomer but without outgoing MCB
VTPN DB (ACDB):8W TPN Supply, installation,testing and commissioning of following double door type distribution board fabricated out of 16 SWG ,CRCA sheet steel recrssed in wall or surface mounted.8 way TPN AC DB double door type (IP 43),consisting of one no 125 Amp TPN MCCB (10 KA/16KA) as incomer but without outgoing MCB
VTPN (ACDB): 6W TPN Supply, installation, testing and commissioning of following double door type distribution boards fabricated out of 16 SWG, CRCA sheet steel recessed in wall or surface mounted. 6-way TPN AC DB double door type (IP 43),consisting of one no100 Amp TPN MCCB (10 KA/16KA) as incommer but without outgoing MCB
VTPN (ACDB): 6W TPN Supply, installation, testing and commissioning of following double door type distribution boards fabricated out of 16 SWG, CRCA sheet steel recessed in wall or surface mounted. 6-way TPN AC DB double door type (IP 43),consisting of one no125 Amp TPN MCCB (10 KA/16KA) as incommer but without outgoing MCB
Providing and fixing of 24" Wall mounted Fan/Air Circulator including suitable support pipe and proper fixing arrangement with the help of welding/Nut bolt as per requirement.- Almonard make
SUPPLY & fixing of MK (Honeywell ) make SINGLE PORT C- TYPE USB charging module (CW589WHI) to provide optimal charging capacity 2.1 A single port along with dust proof USB port shutter ,modular plate ,GI/PVC box etc as 2.1 Amp ,5 V DC ,USB Charging module for portable electronics devices 220 -240 Volt AC/50 -60 HZ ,2 A current ratting with a terminal capacity of 3X2.5 Sq mm.
Providing and fixing of PVC sheet T -Cover with Brass Screw on existing old junction box of 25mm /32mm/50mm PVC/MS conduit including all required T&P etc. as per diretion of EIC.
Providing and fixing of Hylem/PVC Fan Sheet with Brass Screw including removing and refixing of ceiling fan,conncetion etc. complete with all required T&P as per direction of EIC
Providing and fixing of 250mm high speed BLDC PVC exhaust fan in existing opening with PVC grill and back flapp of atomberg make or equivalent approved make
Providing and fixing of 10 watt VistaGlow Essential LED Bulkhead light IP65 ip suitable for outdoor lighting -Philips make
Supplying & Installation of lightingfittings/ fixturescompleteRecessed mounted fittingwith 1x 22 Watt, Round/squareLEDDownlighter(Make:-PhilipsAstraSleek) orequivalent
SITC of 20 watt ASTRA SPOT LED COB light including all accessories,cutting the ceiling etc. as required .PHILIPS make
SITC of 12 W surface COB LED Cylindrical spot light for ceiling ,complete with all accessories etc asrequired Philips make
SITC of 12 W surface LED wallwasher light decorative as specifications including allaccessories etc as required Philipsmake .
Supplying and fixing of 6 Amp, 3 Pin, 240V plug top of approved make suitable for connecting electrical appliances, including making necessary connections complete with all required T&P and as per direction of EIC.
Supplying and fixing of 45 watt philips make (BRP030 LED 45 WW MR PSU GR DX) led street light with existing pipe/fixing arrangement including all required T&P , connection ete. And as per direction of EIC.
Dismantling of old electrical wiring including removal of old light fitting, switch, socket ,Plate, conduit pipe,Hylem sheet,T cover, fan sheet,Ceiling fan,exhaust fan, MCB Box, MCB & RCCB,fire alarm panel, fire cable, smoke detector etc. complete with required all T&P .(Only floor area to be mesured)
Providing, fixing, and connection of a 200 mm PVC exhaust fan(approved make) with louvers in the existing opening, complete with all required T&P, as per the direction of the Engineer-in-Charge.
Providing and fixing of 17x6 mm Profile complete with cutting the False ceiling complete with all required T&P etc. as per the direction of the Engineer-in-Charge.
Supplying and fixing of 10 Module Modular base & cover plate on existing modular metal/PVC boxes etc. including all required T&P and as per direction of EIC.
Supplying and fixing of 16 Module Modular base & cover plate on existing modular metal boxes etc. including all required T&P and as per direction of EIC.
Providing and fixing of 200 mm highspeed BLDC exhaust fan in existingopening with PVC grill and back flappf atomberg make or equivalentapproved make
Providing and fixing of 150mm highspeed BLDC exhaust fan in existingopening with PVC grill and back flappf atomberg make or equivalentapproved make
Tightening ,cleaning and dressing of existing 6 way TPN Horizontal /Vertical MCB Box complete with all required T&P etc. as per direction of EIC.
Tightening ,cleaning and dressing of existing 8way TPN Horizontal /Vertical MCB Box complete with all required T&P etc. as per direction of EIC.
Tightening ,cleaning and dressing of existing 12 way TPN Horizontal /Vertical MCB Box complete with all required T&P etc. as per direction of EIC.
Supplying and fixing of 5 Module Modular base & cover plate on existing modular metal/PVC boxes etc. including all required T&P and as per direction of EIC.
Provision for dismantling of 6 way TPN old rusted and defective MCB box along with MCBs and RCCB, including safe removal of all existing sub-main and outgoing circuits,complete with all required T&P etc.and as per direction of EIC
Provision for dismantling of 8 way TPN old rusted and defective MCB box along with MCBs and RCCB, including safe removal of all existing sub-main and outgoing circuits,complete with all required T&P etc.and as per direction of EIC
Provision for dismantling of 12 way SPN old rusted and defective MCB box along with MCBs and RCCB, including safe removal of all existing sub-main and outgoing circuits,complete with all required T&P etc.and as per direction of EIC
Installation, testing, and commissioning of ceiling fan on existing down rods of standard length , excluding downrod wiring, including all necessary accessories, labor, materials, and tools & plants (T&P), as required and as directed by the Engineer-in-Charge.”
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioningetc. as required. Up 450 mm Sweep.
Fixing of Existing louvers/ shutters with frame of square/round shape for existing exhaust fan of size up to 450 mm Sweep including all required T&P etc. and as per direction of EIC
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
Supplying and fixing of 3 Module Modular base & cover plate on existing modular metal boxes etc. as required.
Supplying and fixing of 4 Module Modular base & cover plate on existing modular metal boxes etc. as required.
Supplying and fixing of 6 Module Modular base & cover plate on existing modular metal boxes etc. as required.
Supplying and fixing of 8 Module Modular base & cover plate on existing modular metal boxes etc. as required.
Supplying and fixing of 12 Module Modular base & cover plate on existing modular metal boxes etc. as required.
Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Bell Push
Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator)- 6 way , Double door
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness notless than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended fromthe ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required - 100 mm width X 50 mm depth X 1.6 mm thickness.
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness notless than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended fromthe ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required - 150 mm width X 50 mm depth X 1.6 mm thickness.
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness notless than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended fromthe ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required - 225 mm width X 50 mm depth X 1.6 mm thickness.
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness notless than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended fromthe ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required - 300 mm width X 50 mm depth X 1.6 mm thickness.
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness notless than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended fromthe ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required - 450 mm width X 50 mm depth X 2.0 mm thickness.
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 KA #C# curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.-Triple pole and neutral
Vendor Code
Category (Marks)
Response by BA
Carbon Footprint (20)
Which GHG emissions your organization has computed and what is their value?
Has your organization set targets & programs to reduce carbon footprint in its overall logistic operation?
Does the organization monitor Stack Emissions (source specific) and/ or Ambient Air Emissions (area wide) in its premises?
Does your organization has a process to recycle these waste categories either in-house or through external agency?
How does the organization incorporate packaging reduction, reuse, and recycling in its purchasing practices?
Do you have a functional Rainwater Harvesting System at your facility?
What is the source wise consumption of water in your organization?
Do you have any waste water treatment facility in your organization?
Please share examples in support of the above.
How does your organization engage in continuous improvement in sustainability practices?
Has the organization taken any initiative(s) to improve the Recyclability Ration of its products (End of Life Treatment) to reduce the impact of manufactured products on the environment and society?
Please provide the % share of solar in overall energy consumption (if response to previous question is Yes)
Are you using Electric Vehicles in your organization setup?
In case response to previous question is "Yes", please share the details of EVs deployed in your organization setup with respect to type of usage etc.
Labor Practices (20)
Does your organization have a presence of an Internal Review Committee and Policies to ensure the workplace is free of physical abuse, corporal punishment, physical contact with the intent to injure or intimidate, and disciplinary measures that cause physical discomfort?
Can you provide information on diversity, equity, and inclusion within your workforce?
What steps are taken to address human rights issues in your supply chain?
Describe your organization's initiatives for supporting local communities where you operate.
Ethics and Anti-Corruption (20)
Does the organization measures the following information:- Total number of identified leaks, thefts, or losses of customer data?
How does your organization prevent and address corruption risks?
Has the organization established a Code of Business Ethics, endorsed by senior management indicating organization’s values, principles, standards, and norms of behavior?
Is there a well-established governance structure for regulating/governing its policies?
Are all labor, health, and safety policies, practices, and expectations communicated to all employees and suppliers in local or appropriate languages?
Description
Direct emissions from owned/controlled sources
Indirect emissions from purchased energy
All other indirect emissions in the value chain
Grid Emission Factor (kg CO₂e/kWh)
Examples
Purchased goods & services, transportation, business travel, waste
Use of sold products, product disposal, downstream transport, franchises
Commuting, leased assets
Stack Limit (Typical)
150 mg/Nm³ (stack)
Stack Emissions
From industrial stacks or chimneys
Regulatory compliance & pollution control
Stack analyzers or sampling
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender 200001980_20260716141437331_TPDDL-ENGG-ENQ-200001980-FY 26-27.pdf
Tender Document • 0.78 MB
Tender 200001980_20260716141437331_Annexure I BoQ Excel.xls
Tender Document • 0.44 MB
Tender 200001980_20260716141437331_Annexure I BoQ.pdf
Tender Document • 0.94 MB
Tender 200001980_20260716141437331_GCC-Service w.e.f 1 12 2020.pdf
Tender Document • 1.81 MB
Tender 200001980_20260716141437331_Safety Bid.pdf
Tender Document • 0.31 MB
Tender 200001980_20260716141437331_SSI question explanation.docx
Tender Document • 0.03 MB
Tender 200001980_20260716141437331_Supplier Sustainability Index (SSI) Questionnaire Format.xlsx
Tender Document • 0.03 MB
Notification of Qualified Bidders_20260825155830492.pdf
Corrigendum • 0.66 MB
Notification of Qualified Bidders_20260825155830492.pdf
Corrigendum • 0.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .