Furnishing of Auditorium and VRV System at College of Veterinary Science, Rampura Phul.

Amount

Providing and fixing in position Aluminium pipe framing (ISI marked of superior make) of 50 x 50 mm,weighing 0.88 kg/meter of requried square aluminium pipe of dimension at 600 x 1200 mm centre to centre with aluminium pipe cleats and aluminium studs/ brackets of aluminium pipe of requried length provided at 600mm centre to centre to keep framing away from wall and ceiling at requried angle with requried scaffolding as per detail. Architectural/ Acoustic design and drawings complete in all respect with requried accessories as desired by Engineer-in-Charge.

Providing and laying of 50mm thick 1000GSM Non woven thremal bonded polyester wadding to be laid in cavity behind wall panelling to be fixed with chicken mesh jali of 24 gauge at all heights complete in all respect to the entire satisfaction of the engineer-in- charge. (Note: The Contractor to submit Manufacturing Test Certificate), required scaffolding complete in all respect with required accesories as desired by Engineer- In- Charge. Note: Quality of above item shall be of superior quality duly approved by Architect and Engineer in charge.

Providing and fixing 12mm ply wood fixed over aluminium frames for installation of fiberglass pannels complete in all respect including all taxes, scaffolding etc. Ply should be of waterproof and Termite proof material and preferably fire resistant for 30min or better. Make Green/ Duro/ Merino/ Centuary

Providing & Fixing Channelled perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl etc.) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.6. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.The panels shall be mounted on special aluminium splines (keel) using inside clips provided by Manufacturer and complete in all respect as desired by Engineer-in-Charge. Armstrong, Anutone, )The panel shall be mounted by tongue and groove mechanism using inside clip on aluminium extruded keel made of Grade 6063-T5 having dimensions 3000(L) x 24(H) x 15.5(W).The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. The panelling should be fully Fire proof as per BIS (Indian Standard Codes) & duly certified. Make Armstrong, Anutone, Decosonic.

Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%. as desired by Engineer-In-Charge. MAKE: Armstrong, Anutone, Decosonic

Providing and Fixing of Acoustical Wall Panel with square edges made of 100% polyster pannels 12mm thick, as per the approved shade . The panel shall be classified for Fire Class B1 , as per BIS-476. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) or 1220x2440mm and shall achieve an NRC of 0.80 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of Aluminium sections and using Wall panel adhesives or by using construction adhesives (as per the instructions laid down by the manufacturer). The polyster fiber substrate shall have a recycle content of 50%. Make Tranquil, Unidus, Himalyan Acoustics

Providing and fixing 12mm gypsum fulton perforated panelling with fleece paper on back side including framing of 50mm frame at 300mm c/c vertically and horizontally filled with 50mm polyster wadding on back side. The panel shall be classified for Fire Class B1 , as per BIS (Indian Standards). complete in all respect including taxes, scaffolding, complete in all respect as desired by Engineer in Charge. Make Gyproc, Knauf, Indian Gypsum or equivalant ISI Marked.

Providing & Fixing of WHITE Fibre Glass Acoustical Suspended Ceiling System with 15mm thick Microlook 90 Edge Tiles with 24mm face exposed parlude grid system of 0.3mm thick ,Main ‘T’ length minimum 3000mm, web minimum 32mm to be placed at 1200mm centre to centre and secondary cross ‘T’ of length 600mm, web minimum 26 mm, inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 1200mm width wise, Specially designed for Acoustic ceilings .The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 – 0.95 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, , Light Reflectance ≥88% as per ASTM E-1477, Colour classic white, Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 15mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 85%. MAKE ARMSTRONG / SAINT GOBAIN / GYPROC.

Providing & Fixing of WHITE minral fiber Acoustical Suspended Ceiling System with 16 mm thick Microlook 90 Edge Tiles with 15mm face exposed superfine grid system of 0.3mm thick ,Main ‘T’ length minimum 3000mm, web minimum 32mm to be placed at 1200mm centre to centre and secondary cross ‘T’ of length 600mm, web minimum 26 mm, inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 1200mm width wise, Specially designed for Acoustic ceilings .The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC 0.85 – 0.95 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, , Light Reflectance ≥88% as per ASTM E-1477, Colour classic white, Fire Performance of Class 0/1 as per BS 476 Part 6/7 with 15mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 85%. MAKE ARMSTRONG / SAINT GOBAIN / GYPROC

Underdeck insulation with expanded polystrene or XLPE (cross-linked polyolefin foam with density of 25 + 3 kg/ m3 ). XLPE can be installed in a new roof, an existing roof (without removing the metal sheet), and curved roofing without any support in an under-deck application complete in all respect with required accesories as desired by Engineer- In- Charge. 50 mm thick. (Note: Before doing the insulation, all the joints of shed area profile sheeting, self drilling screw area and other critical points for water leakage will be sealed with superior weather proof silicon or other water sealant to avoid water leakage and rate is included for the same).

Providing and fixing in position Teak Wooden flooring planks of size 25 mm thick (Finished) of size 100 x 25 mm of minimum 1.00 mt length fixed on 18 mm thick water proof plywood in "Tongue and Groove" fashion as directed. 18 mm thick water proof plywood shall be supported on 50 x 50 mm thick sal wood battens fixed at 600mm c/c both ways with 2 coat of anti-termite chemical. Sal wood frame will be rested on 75 x 75 x 5 mm thick neoprene pads at every joint. Teakwood floor shall be polished with minimum two coat of matt finish Melamine spray polish over a sealer coat with necessary staining and sanding etc. complete in all respect with required accesories as desired by Engineer- In- Charge. Teak wood flooring has to be approved by EIC before supply. (Ply Make: Green, Duro, Century, Merino) .

Supplying & Fixing of laminated wooden flooring tongue and groove system of size 8mm thick. Termite treated to be installed on 10mm foam complete in all respect as desired by Engineer-In-Charge. Make - VISTA/ GOLD LEAF/ SHARPER IMAGE

Providing and Fixing of carpet of Nylon 6.0 yarn/fiber with 100% Nylon,construction cut pile and completely water proof resilient backing. The flooring should be Anti static with thickness of 12 mm(+/-5%) and approximate pile weight of 1200 gsm & total weight 2200 gsm (+/-5%) of roll form. The carpet should be stain resistant.The floor covering should have Fire Test EN-13501 & Flammable pass as 16 CFR 1631 (FF-2-70):2010 in all respect to the entire satisfaction of engineer-in-charge. (make: Outvie, Carpeteria, Nexgen) Test reports to be provided by OEM.

Acoustical Door Supplying & Fixing of Acoustic Door of 56 mm having an STC rating upto 59.6 @ 100 Hz as per ISO:140/ASTM90/413. The Door will be filled with high acoustic materials of 2 layers of 8 mm Water Proof Acoustic Ply with Dampner Sheet, 2 Layers of 10mm thick Absorb Wool 300 GSM, Sound Dampner 12mm 1218x1218 mm made of 10 mm compressed wood cement composites 1250Kg/m3 and 2mm dampner sheet 37 STC as per ISO 140 (Part-III) - 1995. Final Finish with Teak Ply 4mm thick interior and Exterior Side. Door frame will be made of teak Wood. Frame on all four sides or three sides frame and drop seal below will be provided along with the door. High load bearing hinges will be provided along. FR tested as per IS:3614 (Pt. II) & BS: 476- (Pt.20 & 22) complete in all respect as desired by Engineer-In-Charge. (For Ply & laminate make :Green, Duro, Century, Merino)

Providing and fixing of Double Leaf Panic Bar set along with Panic Trim for operation from the other side of the Panic Bar Complete in all respect to entire satisfaction of the engineer-in-charge. (make: Hettich, Becker, Marshal, or equivalent)

Providing and fixing of Heavy duty door closer complete in all respect to the entire satisfaction of the engineer-in-charge. (make: Hettich, Becker, Marshal, or equivalent)

Providing and fixing 25mm dia & 400mm long brushed steel finish pull handles with long bolt and cap for fixing from outside complete in all respect with required accesories as desired by Engineer- In- Charge. (make: Hettich, Becker, Marshal, or equivalent)

Providing and fixing blinds of desired colour and shade & spring drive system with steel ball chain/one touch with speed control action roller blind with end brackets with head rail, components, bottom bar. Fabric : screen classic 5% ,Fabric value : 465 gsm , Thickness : 0.65 mm Fabric to be as per approved sample complete in all respect with required accesories as desired by Engineer- In- Charge.

Provinding and fixing of Main Curtain made out of velvet curtain (450 to 500 gram in 1 mtr) cloth flammability BS EN 1021-1:1994 with upwards rolling arrangement and motorised operation complete with runners, runners, master runner,pullies,steel wire rope required thickness and strength,1 HP motor (make Crompton, Kirloskar or equivalent) of required number,air breaker contactors (make L&T, SIEMENS, Schneider ). of required number,push button to roll and unroll or stop positions.The curtain should be draped to upwards when in closed position complete in all respect with required accesories as desired by Engineer- In- Charge. (Fabric Make: Raymonds, Outive, Response, Nexgen, JC Joel)

Provinding and fixing of rear Curtain (350 to 400 gram in 1 mtr) made out of velvet curtain cloth flammability BS EN 1021-1:1994 with sliding arrangement and motorised operation complete with runners, runners,master runner,pullies,steel wire rope required thickness and strength, 1 HP motor (make Crompton, Kirloskar or equivalent)). of required number,air breaker contactors (make L&T, SIEMENS, strictly with the one approved of EIC) to when in closed position complete in all respect with required accesories as desired by Engineer- In- Charge. (Fabric Make: Raymond, Outive, JC Joel, Response, Nexgen )

Provinding and fixing of velvet cloth (outvie) black fabric flammability BS EN 1021-1:1994 (cigarette) as per approved sample fixed over the metal framework made out of 2" x 2" sqaure MS pipe (make Tata,Jindal Sail etc) in specification complete for wings Measurement will be made for external dimensions including heading for payment 'complete in all respect with requiredas per required size and accesories for complete swivel and hinges arrangement of supior make as desired by Engineer- In- Charge. Fabric Make Response/Raymonds/Nexzen/Outive & Ply make Green, Merino, Centuary, Duro & for HDHMR Board Green, Armstrong, Action Tesa

Providing and fixing of frills in double gathering box pleats stiched ou of valvet fabric of flammability BS EN 1021-1:1994 (cigarette) The frill to be fixed from the suspension grid with 38 mm dia B class ms pipe suitably hung by mean of 35x4mm MS flat. The pipe & flat to be painted with black enamel paint size 53' x 3' complete in all respect with required accesories as desired by Engineer- In- Charge. Make Response/Raymonds/Nexzen/Outive/ JC Joel )

Providing and fixing in position Acoustical Panelling made from Wood wool board 20 mm thick as per detailed Architectural - Acoustical design & drawings etc. with required scaffolding complete in all respect with required accesories as desired by Engineer- In- Charge. (Make:Anutone, Fibertex, Durotax, Armstrong, Decosonic)

Providing and fixing Auditorium Chairs as per Annexure A which includes detailed specifications.

Providing and fixing of 74 mm thick wooden partition proscenium from finished floor level to ceiling . The proscenium shall made up of M.S. pipe Frame 49.5mmx49.5mm x2.9mm atleast (TATA/Jindal Hisar/Apolo /Jyoti /Kamdhenu or equivalent) fixed at 600mm c/c (including primer & paint), the framework shall be filled with 50 mm thick 1000GSM Non woven thermal bonded polyester wadding to be laid in cavity behind proscenium wall, to be fixed with chicken mesh jali of 24 gauge at all heights and finished with 12 mm thick perforated HDHMR board (make Green/Action Tesa or equivalent) from both side firmly screwed & fixed on MS section complete in complete in all respect to the entire satisfication of engineer-in-charge.

Providing and fixing 12 mm thick perforated HDHMR board (make Green/Action Tesa/ Armstrong) including scaffolding where required from both side firmly screwed & fixed on MS section complete in complete in all respect to the entire satisfication of engineer-in-charge.

Providing and fixing of M.S. Pipe/Tubular Section make (TATA/Jindal Hisar/Apolo /Jyoti) framework for proscenium walls/other support frames including scaffolding up to required height & labour for cutting, welding,with priming coat & two or more coats of synthetic enamel paint etc .make (Nerolac/Asian/ Berger /Dulux or equivalent to the entire satisfication of engineer-in-charge. (Finished product to be measured for payment)

Providing and fixing 50 mm thick PUF plain panels for wall with rigid PUF injected CFC free Polyurethane foam including accessaries like self drilling screws with silicon washers of superior make (Interior metal skin vapour Permeability 0.08-0.12 gms/hrm2) at 90% RH &38 degree centigrade ) including plain profile/corrugated profile as per requirement of 0.5mm thickness ,precoated painted galvalume sheet, yield strength of 550 MPA, metallic coated with Zinc-Aluminium Alloy, pre painted with super Duroble polyster XRW quality paint of approved colour on outer side, including inorganic infrared reflective pigment, (Make TATA Duroshine/TATA Bluescope/ JSW ,complete in all respect including scaffolding to the entire satisfication of engineer-in-charge.

Dismantling of granite flooring upto 25mm thickness including CC base/step of stair etc of any thickness with carefully & safely removal and shifting/stacking of granite pieces and further disposal of rubbish material at dump place complete as desired by EIC.

Supply, installation, testing &Commissioning of stage FOH clusters having 14"/12"/10 or better LF driver and multiple MF/HF drivers, Bi-amplified 2- or 3-Way array loudspeaker system, with Individual Module free field Frequency Range ((-10dB) of 60Hz - 18kHz / (-3db) of 80Hz - 18kHz) or better & Power Handling of >= 400W LF + 70W MF/HF or better. The Loudspeaker module shall have a Sensitivity of LF: 95 dB-SPL and Max. SPL (Peak) of 130 db or better. It should have a Horizontal near dispersion pattern of 100º or better, vertical dispersion of the array shall be 60 degrees or better. The Modules shall be of Baltic birch plywood construction/ABS with internal metal bracing. All OEMs shall offer a suitable number of modules to achieve the required vertical angle (Minimum of 4 array modules) complete in all respect with required accessories as desired by Engineer- In- Charge. Make :- Bose/QSC/JBL /Renkus-Heinz/Meyersound/D&B/Tannoy.

Supply, installation, testing & Commissioning of OEM flying array frame and other necessary hardware for suspending main speaker arrays. All necessary hardware to be included to achieve a safety factor of 8:1 or better complete in all respect with required accesories as desired by Engineer- In- Charge. Make :- Bose/QSC/JBL /Renkus-Heinz/Meyersound/D&B, Tannoy

Supply, installation, testing & Commissioning of a single 18" or dual 15" subwoofer. The loudspeaker shall meet the following criteria: usable Frequency Range (-10 dB) of 35 Hz - 100/200Hz or better. It should have an axial Sensitivity of > = 92dB (1W/1m) or more delivering a free field Max. Calculated SPL (peak) of>=127 db or better. The loudspeaker should have a nominal impedance: 4/8 ohm and continuous Power Handling of 750W or more; Complete with installation accessories as per the site requirement. Make :- Bose/QSC/JBL /Renkus-Heinz/Tannoy/Meyersound/D&B.

Supply, installation, testing & Commissioning of OEM flying array frame and other necessary hardware for suspending subwoofer complete in all respect with required accesories as desired by Engineer- In- Charge. Make :- Bose/QSC/JBL /Renkus-Heinz/Meyersound/D&B/Tannoy

Supply, installation, testing and commissioning of two-way 8 -inch or better surface/wall mount loudspeaker. The loudspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 90Hz - 18 kHz / Frequency Range (-3 dB) of 100 Hz to 20 kHz or better; Nominal Dispersion : 90°H x 50°V or better; Power handling of 400W peak or more; Sensitivity : 90 dB or better and the Max SPL : 115 dB Peak or more with a Nominal impedance of 8/16 ohms and Standard wall mount brackets shall be included complete in all respect with required accessories as desired by Engineer- In- Charge. Make:- Bose/QSC/JBL /RenkusHeinz/ Meyersound/ D&B/Tannoy

Supply, installation, testing &Commissioning of Passive two-way point source loudspeaker with a single 10"/12" LF driver and compression driver with 1.5" or better. Frequency Range (-10dB) of 80Hz - 18kHz or better & long term Continuous Power Handling of 250W or better. The Loudspeaker module shall have a Max. SPL (Peak) of 122 or better. It should have Horizontal dispersion pattern of 85º or better, vertical dispersion of the loudspeaker shall be 50 degrees or better. The loudspeaker shall be enclosed in a Multi angle plywood enclosure with perforated steel grille. complete in all respect with required accessories as desired by Engineer- In- Charge. Make :-Bose/QSC/JBL /Renkus-Heinz/Meyersound/D&B/Tannoy

Supply, installation, testing and commissioningof Two-way Small Format high SPL surface mount loudspeaker. The loudspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 80 Hz - 18 kHz or better; Nominal Dispersion : 100°H x 60°V, Long term Power handling of 700W peak or more; Sensitivity : 90 dB; Max SPL : 115 dB Peak; Nominal impedance of 8 ohms. Dual 6.5-inch or single 8" woofer or better; Single 1-inch voice coil high-frequency compression driver; U-bracket shall be included complete in all respect with required accessories as desired by Engineer- In- Charge. Make:- Bose/QSC/JBL/Renkus-Heinz/Tannoy/Meyersound/D&B.

Supply, installation, testing &Commissioning of wireless Lapel microphone, with (UHF) Diversity receiver, 12 Channel Preset or better, Display on Transmitter and Receiver , RF Power output 30/50mW or Better , Polar Pattern :- Omnidirectional, Carrier frequency range 500Mhz to 865Mhz, Frequency response 45–15kHz, Mute Button on Transmitter, Battery Operation time Minimum 8hr , Should have Charging Contact in Body pack Transmitter, Receiver dynamic range 106dB (A-weighted). complete in all respect with required accessories as desired by Engineer- In- Charge. Make:- Beyerdynamic/Shure/Sennheiser/AKG

Supply, installation, testing & Commissioning of wireless Handheld microphone, with (UHF) Diversity receiver, 12 Channel Preset or better , Display on Transmitter and Receiver , RF Power output typ.30/50mW or Better , THD, total harmonic distortion < 1 % , Signal-to-noise ratio > 103 dB(A)Polar Pattern :- Omnidirectional, Carrier frequency range 548Mhz to 865Mhz, Frequency response (Microphone) 80...16000 Hz , Mute Button on Transmitter, Battery Operation time Minimum 8hr , Sound pressure level (SPL) 149 dB complete in all respect with required accessories as desired by Engineer- In- Charge. Make:- Beyerdynamic/Shure/Sennheiser/AKG

Supply, installation, testing & Commissioning of 4 way Antenna Distribution System. The Antenna Splitter should supportup to 4 Receivers, itshould split signal from 2 Antennas to 4 wireless microphones receivers or more ,it should be able to power upto 4 connected receivers ,full true diversity support, should support UHF range from 470 MHZ to 870 MHZ or more, Should come with power supply as required, should be from the same OEM as wireless microphones for 100 % compatibility etc complete in all respect with required accessories as desired by Engineer- In- Charge. Make:-Beyerdynamic/Shure/Sennheiser/AKG

Supply, installation, testing & Commissioning of Passive Directional Antenna ,the antenna should come built-in 3 dB of more gain, should be from the same OEM as wireless microphones for 100% compatibility etc complete in all respect with required accessories as desired by Engineer- In- Charge.Makes:- Beyerdynamic/ Shure/ Sennheiser/ AKG

Supply, installation, testing & Commissioning of Instrument Microphone with high-frequency reproduction Polar Pattern: Cardioid, Frequency response : 33-19,000 Hz, Open circuit voltage : 2.7 mV/Pa (-51.4 dBV), Nominal impedance : 600 Ω, Load impedance : ≥ 2 kΩ, Connection : XLR, 3-pin, male, etc complete in all respect with required accessories as desired by Engineer- In- Charge. Makes:- Beyerdynamic/Shure/Sennheiser/AKG

Supply, installation, testing &Commissioning of Wired Vocal Microphone with On/Off switch, Transducer type: Dynamic, Polar pattern: Super cardioid, Frequency response: 30 - 18,000 Hz, Open circuit voltage : 2.5 mV/Pa (-52 dBV), Nominal impedance 600 Ω, Connection: XLR, 3-pin, male, etc. complete in all respect with required accessories as desired by Engineer- In- Charge. Makes:- Beyerdynamic/Shure/Sennheiser/AKG

Supply, installation, testing & Commissioning of black anodized, table mic stands complete in all respect with required accesories as desired by Engineer- In- Charge.

Supply, installation, testing & Commissioning of black anodized, floor mic stands complete in all respect with required accesories as desired by Engineer- In- Charge.

Supply, installation, testing &Commissioning of 16 in 8 out or better Analog I/O Digital stage box as the same OEM and compatible with offered Digital Mixer. Shall offer pre-amp control and a redundant mode connection complete in all respect with required accessories as desired by Engineer- In- Charge. Make: Yamaha/Allen & Health/Digico/Soundcraft.

Supply, installation, testing & Commissioning of Digital Audio Mixer with 32-40 input Digital Mixing Console and USB Interface and 32 programmable Preamps, 24 or better Motorized Faders, 40 DSP input channels (32 mono inputs and 4 stereo channels/returns), Channel LCD's, FireWire/USB Audio Interface and iPad/iPhone* Remote Control include I/O Box with 16 Remote-Controllable Preamps, Including Mini Stage box 16 or 32 Channel combine high-quality components with a streamlined design, making it easy to add multiple channels of remote- controlled I/O toDigital mixing console complete in all respect with required accessories as desired by Engineer- In- Charge. Make: Yamaha/Allen & Health/Digico/Soundcraft.

SITC of 12 x 8 Networked Digital Signal Processor With AEC; Should have 12 ormore floating AEC in group of 4 or more Channels; DSP with 12 inputs and 8 outputs or more; 12 Control Inputs and 6 Logic Outputs for GPIO Integration; 48V phantom power on all analog inputs; THD: <0.01% 20Hz to 20KHz; Crosstalk: <-75dB orbetter; Open architecture software configurable; Separate logic processing power; 2 digital audio bus RJ45 Port; 1 Ethernet port for Monitoring and configuration; Capable to handle +5V unloaded logic output voltage; Should have speech sense engine; Capable to control 3rd party devices with TCP IP and RS232; Should have 1nos of RS 232 port for integration with control System; Should have Bi-Directional Locate Functionality; Should have 48 or more digital audio Channel Bus; Should have monitoring LED for COM, STAT, ERR and PWR; etc. make:- Bose/QSC/BSS/Biamp

Supply, installation, testing & Commissioning of 8 channel class D Networkable Power amplifier with a Max Output Power of 8X500 W @8 ohms, or bridged mode output power of 4x 1250W @ 8/4 ohms (with prior approval as per design from Engineer-In-Charge). 20Hz - 20 KHz, SNR of 102dB and THD + N of <0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etccomplete with Ethernet Port for Network Control, programming and monitoring. complete in all respect with required accessories as desired by Engineer- In- Charge. Make:- Bose/QSC/Crowm/Labgruppen/Powersoft

Supply, Installation, testing and commissioning of integrated high impedance Class D Dual Zone Amplifier with output power of 2 x 120 W @ 70/100 V ; Frequency Response - 55 Hz - 20 kHz (+0/-3 dB, @ 1 W reference 1 kHz) ; THD+N - ≤1 % (at full rated power); Channel Separation (Crosstalk) - ≤-60 dBV (below rated power, 1 kHz); A/D and D/A Converters - 24-bit / 48 kHz; Audio Latency - 10.4 ms - (any input to speaker output or aux output); THD <0.3% at rated power. Channel Separation ≤ –60 dBV (below rated power, 1 kHz), Dynamic range > 88 dB. Maximum Input Level : +10 dBV or better. 1 balanced page/priority input, 2 or more unbalanced line inputs; built in loudspeaker EQs(HPF). Shall include output for expansion amplifier and remote controller (Wired) for source as well as volume control complete in all respect with required accessories as desired by Engineer- In- Charge. Make:- Bose/QSC/Crowm/Labgruppen/Powersoft

Supply, installation, testing & Commissioning of custom Floor Box for stage with 4 power, 1 HDMI, 2 XLR input, 1 HDMI out, 2 LAN port complete in all respect with required accesories as desired by Engineer- In- Charge. make;- Custom/EIC aprroved

Supply, installation, testing & Commissioning of 3' HDMI male(M) to HDMI Male (M) Cable with 28 AWG copper wire construction, 18 Gig HDMI 2.0 4K@60Hz and HDR or better, Full ATC Certification, UL/CSA listed for in‐wall use, Gold plated connectors complete in all respect with required accessories as desired by Engineer- In- Charge. Make:-Crestron/Extron/Lightware/AMX/Kramer

Supply, installation, testing & Commissioning of 6' HDMI male(M) to HDMI Male (M) Cable with 28 AWG copper wire construction, 18 Gig HDMI 2.0 4K@60Hz and HDR or better, Full ATC Certification, UL/CSA listed for in‐wall use, Gold plated connectors complete in all respect with required accessories as desired by Engineer- In- Charge. Make:-Crestron/Extron/Lightware/AMX/Kramer

Supply, installation, testing & Commissioning of 9' HDMI male(M) to HDMI Male (M) Cable with 28 AWG copper wire construction, 18 Gig HDMI 2.0 4K@60Hz and HDR or better, Full ATC Certification, UL/CSA listed for in‐wall use, Gold plated connectors complete in all respect with required accessories as desired by Engineer- In- Charge. Make:-Crestron/Extron/Lightware/AMX/Kramer

Supply, installation, testing &Commissioning of 15' HDMI male(M) to HDMI Male (M) Cable with 28 AWG copper wire construction, 18 Gig HDMI 2.0 4K@60Hz and HDR or better, Full ATC Certification, UL/CSA listed for in‐wall use, Gold plated connectors complete in all respect with required accessories as desired by Engineer- In- Charge. Make:- Crestron/Extron/Lightware/AMX/Kramer

Supply, installation, testing &Commissioning of minimum 14 AWG or thicker Speaker Cable with copper conductors and PVC Jacket complete in all respect with required accessories as desired by Engineer- In- Charge. Make :- Make:-Crestron/Extron/Kramer

Supply, installation, testing &Commissioning of 24 AWG or better CAT6A support 10 gig data LSZH cable complete in all respect with required accessories as desired by Engineer- In- Charge. Make- Crestron/Extron/Derwiser/AMX/Kramer

Supply, installation, testing &Commissioning of Shielded microphone cable. 2 core + Shield, 23 AWG or better complete in all respect with required accessories as desired by Engineer- In-Charge. Make ;- Crestron/Extron/Kramer

Supply, installation, testing &Commissioning of USB Active cable of 10 mtr. or more length complete in all respect with required accessories as desired by Engineer- In- Charge. Make ;- Crestron/Extron/Lightware/Kramer/AMX

Supply, installation, testing & Commissioning of LMR Cable with required connectors for Antennas complete in all respect with required accesories as desired by Engineer- In- Charge.

Supply, installation, testing & Commissioning of 42 U Equipment Rack, Locakable front glass door, cooling facility, internal wiring, front glass door, heat dessipation fans, movement wheels, power distribution units & equipment shelves as required, fully welded construction for strength. Extra-wide rackrail for cable pass-throughs to facilitate front-to-rear cabling complete in all respect with required accesories as desired by Engineer- In- Charge. Make:- Netrack/APW President/Rittal/valrack

Supply, installation, testing & Commissioning of DLP Laser Projector, 1920X1200 WUXGA native resolution, 13,500 lumens or better laser light source projector, Contrast Ratio - 100000:1, with HDMIx2 , 1 HDBbaseT, Control RS232/Ethernet. Lens throw ratio 1.85 : 1 to 2.44 :1 or better, including Compatiable Projector Mount as per site requierment design complete in all respect with required accessories as desired by Engineer- In- Charge. make:- Barco/Christie/Digital projection

Supply, installation, testing & Commissioning Cyclorama:MS. Frame structure: 35mm dia MS. Pipe Frame structure with 25 mm MS pipe Ribs between the frame pipes. Structure to be raised from stage floor - 150 to 200 mm; back wall clearance as per drawings.MS Frame structure to be well supported from back wall and /or ceiling.Screen Fabric : White Matt Fabric. Screen to be made as per the maximum screen size possible on the stage with minimum 200mm black border on all sides for fixing of Eyelets on all sides. Cyclorama to be stretched and tightened from all sides securely using cotton ropes. Appx. Size:- 8 mtrx 5 mtr complete in all respect with required accesories as desired by Engineer- In- Charge. (Make: GTC, Harkness, Effectron)

Supply, installation, testing & Commissioning of Smart metallic podium with space for optional gooseneck mic , separate drawer for documents, fitted with i7 12 Gen PC (8GB RAM, 500GB SSD, inbuiltWi-Fi enabled, and licensed Window 10 Professional pre loaded with 4 USB port, LicensedMicrosoft word, antivirus and other required softwares for functioning of auditorium softwares, HDMI port and audio port, fitted with 23” Interactive Pen Touch Monitor (Wacom or Equivalent) for Live annotation with tilt motorized mechanism. FHD / UHD Resolution. Brightness: 250 cd/m2, contrast ratio: 1000:1 or better. Viewing angle : 178°(v) 178°(h) or better. Input: 1x HDMI. USB Interface. To be supplied with complete accessories wireless keyboard and wireless mouse with 1 kVA double battery or better capacity UPS complete in all respect with required accessories as desired by Engineer- In- Charge. Podium design with logo has to be approved by EIC before supply. Make:- PC (HP/DELL/IBM) Make :- UPS (APC/Microteck/Luminous)

Supply, installation, testing & Commissioning of 55"4K (3,840 x 2,160), Direct LED Professional Display with 4K resolution, Native Contrast ratio upto 1100:1, Response time 8ms or better, Peak Brightness 500 cd/m² or better, 4K 24/7 Portrait , HDCP 2.2 (HDMI) / RS232 / USB / RJ45 / Wi-Fi with In-Built Bluetooth / 10W Speakers optional Android™ OS system, Viewing angle 178 degree or better, Pro Mode, complete in all respect with required accessories as desired by Engineer- In- Charge. Make:- Sony/Samsung/LG.

Supply, installation, testing & Commissioning of tilt capable, height adjustable floor cart for confidence monitor display of reputed make and Shall have integrated VESA mounts for display complete in all respect with required accesories as desired by Engineer- In- Charge.

Supply, installation, testing & Commissioning of 43"4K (3,840 x 2,160), Direct LED Professional Display with 4K resolution, Native Contrast ratio upto 1100:1, Response time 8ms or better, Peak Brightness 500 cd/m² or better, 4K 24/7 Portrait , HDCP 2.2 (HDMI) / RS232 / USB / RJ45 / Wi-Fi with In-Built Bluetooth / 10W Speakers optional Android™ OS system, Viewing angle 178 degree or better, Pro Mode, complete in all respect with required accessories as desired by Engineer- In- Charge.Make:- Sony/Samsung/LG.

Supply, installation, testing & Commissioning of 70"/75" 4K (3,840 x 2,160), Direct LED Professional Display with 4K resolution, Native Contrast ratio upto 1100:1, Response time 8ms or better, Peak Brightness 500 cd/m² or better, 4K 24/7 Portrait , HDCP 2.2 (HDMI) / RS232 / USB / RJ45 / Wi-Fi with In-Built Bluetooth / 10W Speakers optional Android™ OS system, Viewing angle 178 degree or better, Pro Mode, complete in all respect with required accessories as desired by Engineer- In- Charge. Make:- Sony/Samsung/LG.

Supply, installation, testing &Commissioning of 4K/UHD 60 fps PTZ Camera specialized for video conferencing having minimum 20x optical zoom, 12x Digital Zoom, 1/2.5" 8.5 MP CMOS Sensor. featuring HDMI/ SDI/Ethernet output, Control: RS232/Ethernet. Including wall/ceiling mounting accessories complete in all respect with required accessories as desired by Engineer- In- Charge. Make;- Lumens/Bosch/Axis/Pelco

Supply, installation, testing &Commissioning of hardware-based Video Recording and streaming device for recording all kind of meetings including video conference. 02 or more HDMI Input, 01 or more HDMI/DVI input. one or more analog video input. one or more balanced/unbalanced analog audio Input, Minimum two window Picture-in-Picture (PIP), Picture by Picture. Resolution minimum 1080P@30fps or better. Built in or Externalstorage of minimum 30GB and option for external and network storage. Should also support built instreaming. PUSH/PULL, RTSP/RTMP, Unicast/Multicast. RS232/LAN control complete in all respect with required accessories as desired by Engineer- In- Charge. Make:- Extron/Lumens/Mediasite/Aten

Supply, installation, testing & Commissioning of 2 gang Wall plate type AVOIP transmitter, 4K @60 Hz,4:4:4, HDMI/VGA Auto switching, Encode audio / video, USB, IR, RS232, and power over IP network up to 100m, resolutions up to 4K ,4:4:4, HDR10, and multi-channel Audio, HDCP 2.2 compliant, Extend USB2.0 full speed up to 12Mbps, PoE or DC power input, 1 gigabit network infrastructure using JPEG2000 encoding with a variable data rate at an average of 250 Mbps up to 850Mbps , analog audio input port for audio embedding, RS232 port as pass through to control a third party device, USB KVM inbuilt complete in all respect with required accessories as desired by Engineer- In- Charge. make:- Crestron/Extron/Lightware/AMX/Kramer.

Supply, installation, testing & Commissioning Box type HDMI AVOIP Transmitter, 4K @60 Hz, 4:4:4, Encode audio / video, USB, IR, RS232, and power over IP network up to 100m, resolutions up to 4K 4:4:4, HDR10, and multi-channel Audio, HDCP 2.2 compliant, Extend USB2.0 full speed up to 12Mbps, PoE or DC power input, 1 gigabit network infrastructure using JPEG2000 encoding with a variable data rate at an average of 250 Mbps up to 850Mbps , analog audio input port for audio embedding, RS232 port as pass through to control a third party device, USB KVM inbuilt.7.1 multichannel audio, Up & Down scaling capability, Supports video walls with bezel compensation in and out for 2 way IR control complete in all respect with required accessories as desired by Engineer- In- Charge. make:- Crestron/Extron/Lightware/AMX/Kramer.

Supply, installation, testing & Commissioning of AVoIP Receiver (Decoder) with industry standard codec. Shall support HDMI signals up to 4K 4:4:4 HDR, HDCP 2.2 compliant, and 7.1 multichannel audio, Upscaling upto 4K resolutions. RS232 port, bidirectional IR support. Video wall mode with Bezel compensation, USB connection passthru. Integrated scaler with up & down scaling capability up to 4K30 4:4:4 POE powered, variable or fixed data rate complete in all respect with required accessories as desired by Engineer- In- Charge. make:- Crestron/Extron/Lightware/AMX/Kramer

Supply, installation, testing & Commissioning of Controller for AVOIP devices having Supports resolutions up to 4K@60 4:4:4 with HDR, ``Integrated up or down scaling for maximum display compatibility, HDMI connectivity for source/sink I/O & CEC ,HDMI Loop output on encoder, Low latency & fast switching time, RS-232 pass- through ports, Fully compatible with 3rd party control systems, Audio embed/de-embedding ports, Supports most multi-channel audio formats, USB, RS-232 & Audio may be routed independent of the video, Decoder equipped with an 4K auto-scaler,Uses JPEG2000 video codec,Dante Audio Support, Configuration license upto 50 IP equipment complete in all respect with required accessories as desiredby Engineer- In- Charge. Make:- Crestron/Extron/Lightware/AMX/Kramer.

Apple lightning to HDMI female, Apple USB-C to HDMI female, genric USB-C to HDMI complete in all respect with required accessories as desired by Engineer- In- Charge. make:- Crestron/Extron/Lightware/AMX/Kramer/Apple.

Supply, installation, testing & Commissioning of 10-11 inch Multi‐Touch display(iPad) with IPS technology with Liquid Retina display, Resolution:2388x1668-pixel resolution at 264 pixels per inch (ppi), 600 nits brightness. Should be provided with docking station complete in all respect with required accessories as desired by Engineer- In- Charge. Make:-Apple or equivalent make approved by EIC.

Supply, installation, testing & Commissioning of Fully Programmable 10" wall mount capacitive touchscreen interface for switching and control of AV equipment. TFT Active matrix Color LCD display, Resolution 1280x800 or higher, Color depth : 24 bit, 16.7 million colors or higher, Brightness: 400 nits (cd/m2) or higher, Viewing angle: ±80° horizontal, ±80° vertical or more, Capacitive Touch screen. Memory: 4GB Flash, SD RAM: 2 GB. 10/100/1000Base-T female RJ-45 connector. Shall be supplied with Power supply or POE Inejctor along with wall mounting accessories. Shall meet regulatory compliances: CE, c-UL, UL complete in all respect with required accessories as desired by Engineer- In- Charge. make:- Crestron/Extron/Lightware/AMX/Kramer.

Supply, installation, testing & Commissioning of fully programmable 6-8 button wall mount automation system controller,shall work over standard RJ-45 point to point cabling complete in all respect with required accessories as desired by Engineer- In- Charge. Make: Crestron/Extron/Lightware/AMX/Kramer.

Supply, installation, testing & Commissioning of IR receivers compatible with offered automation system. Complete with necessary cable complete in all respect with required accessories as desired by Engineer- In- Charge. make:- Crestron/Extron/Lightware/AMX/Kramer.

Supply, installation, testing & Commissioning of AVoIP system controller with RS-232 & Network interfaces. Complete with subscription licenses for all end-points for a period of at least 10 years. Should be Software manageable, expandable complete in all respect with required accessories as desired by Engineer- In- Charge. make:- Crestron/Extron/Lightware/AMX/Kramer.

Supply, installation, testing & Commissioning of gigabit L II with minimum 48 ports POE plus(+) switch or better or as required for auditorium design managed switch with combo SFP ports. Should be Software manageable, expandable complete in all respect with required accessories as desired by Engineer- In- Charge. MAKE :-Netgear/Cisco/Allied Telesis.

Supply, installation, testing & Commissioning of of HDMI to USB-C converter. Shall support 4K resolutions complete in all respect with required accessories as desired by Engineer- In- Charge. make:- Crestron/Extron/Lightware/AMX/Kramer.

Supply, installation, testing &Commissioning of USB extender set that extends computer USB 1.1 and USB 2.0 signals up to 100m (330 ft) over twisted pair cabling to four remote devices. The extender set utilizes inexpensive twisted pair cabling and has a throughput of up to 480Mbps. The extender set is perfect for keyboard and mouse extension, remote data ports, minimum 4 USB A on transmitter and 1 USB- Bon receiver, security applications and interactive white board applications complete in all respect with required accessories as desired by Engineer- In- Charge. make:- Crestron/Extron/Lightware/AMX/Kramer.

Supply, installation, testing & Commissioning of Motorised winch to use as Lighting bar of 7.5 mtr., made using 40NB dual barrel undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint and provided with Necessary pulley, guide pulleys, GI wire rope with winding drum, Specially designed compact gear box,0.5/1.0HP AC motor, Upper and lower limit controller, Average Length of Bar 10 mtr, With cable retractor & cable trays complete in all respect with required accessories as desired by Engineer- In- Charge (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of Fixed Light bar of 10 mtr. length, made using 40NB dual barrel undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint and provided With cable trays complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of Motorised winch to use as Utility bar of 8 mtr. length, made using 40NB dual barrel undergone through various chemical treatment to keep them rust free and finished with two coats of Red Oxide primer and one coat of enamel paint and provided with Necessary pulley, guide pulleys, GI wire rope with winding drum, Specially designed compact gear box, 0.5/1.0HP AC motor,Upper and lower limit controller, Average Length of Bar 10 mtr complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of Direct lighting distribution board panel having incomer 100 A 4 pole MCCB or 63 A 4pole/TPN , outgoing 1 no. 32 A TP MCB & 72 nos 10-16 Amp SP MCBs. Necessary phase indicator lamp, meter , and Busbar to be provided. The panel must have undergone through various chemical treatment to keep them rust free and dulypowder coated in Siemens Grey finish. MCB's to be used Siemens, schnieder, ABB, Legrand complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of MS lighting junction box made up of 16SWG CRCA sheet undergone through various chemical treatment to keep them rust free and duly finished with black powder coated paint in black matt finishand5/15A Anchor Socket with suitable glands complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of MS sheet metal fabricated DMX junction box made up of 16 SWG CRCA sheet undergone through various chemical treatment to keep them rust free and duly finished with black powder coated paint in black matt finishand fitted with 3/5 pin XLR DMX connector complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron)

MS Fabricated power junction box (PJB) for terminating the motor wires undergone through various chemical treatment to keep them rust free and duly finished with black powder coated paint in black matt finish complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of Well designed and engineered Wall mount 10 feeder Motor Control Centre Panel with 125A McCabe as incomer and 32A TP MCB as outgoing necessary meterings, contactors etc. to control the Light Bars, Frill Bars etc. (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of Well designed and engineered Wall mount 2 feeder Remote Control Panel with necessary indicators and terminal block for remote operations of curtains complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of MS sheet metal fabricated DMX junction box made up of 22SWG CRCA sheet undergone through various chemical treatment to keep them rust free and duly powder coated and fitted with 3/5 pin XLR DMX IN connector for console complete in all respect with required accessories as desired by Engineer- In- Charge.

Supply, installation, testing & Commissioning of MS sheet metal fabricated power junction box undergone through various chemical treatment to keep them rust free and duly powder coated and fitted with 2 10amps 3 pin IEC socket, ON/OFF switch and necessary glands to power splitters and console complete in all respect with required accessories as desired by Engineer-In-Charge.

Supply, installation, testing & Commissioning of MS sheet metal fabricated DMX junction box made up of 22SWG CRCA sheet undergone through various chemical treatement to keep them rust free and duly powder coated and fitted fitted with 3/5 pin XLR DMX IN connector for console complete in all respect with required accessories as desired by Engineer- In- Charge.

Supply, installation, testing & Commissioning of 200W LED Fresnel spot Light with 200mm dia Germen Lens with Lamp power - 200W , LED Type : COB LED, Color Temperature 3200K ,CRI > 95, spot - Flood Focus adjustment : Mototrised, Beam angel - 10° - 50°Power Rating - IP 20 , Control Manual , DMX0-100% through manual and DMX , Channels - 2 channel DMX 512 , Power Supply - 100-240 V AC, 50/60nHz CE Certifiedcomplete in all respect with required accessories as desired by Engineer- In- Charge.(Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of 200W LED PARCAN with below specification : Lamp power - 200W , LED Type : COB LED, Color Temperature CW/WW , Power Rating - IP 20 , Control Manual , DMX, Channels - 2 channel DMX 512 , Power Supply - 100- 240 V AC, 50/60nHz , CE Certified complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of 54x3W LED par light complete with 8-channel DMX 512, high brightness mixing color evenly, stable performance with sound active auto, DMX, and power and DMX loop in and out option, undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below. Lamp - 54 x 3W RGBW LED, Power consumption – 150W, Power supply - 230/240V AC, Power cable - 3 core 1.5 sq. mm. copper PVC insulated, Channels - 1 Channel DMX-512, Beam angle - 25° (15°, 45° optional) Function - Manual dimming, DmX modes of operation. The work shall be completed in all respect as per sound engineering practice & Direction of EIC. (Make: Leksa, Canara, Effectron)

Supplying Installation testing & Commissioning of LED Bar Light having RGBWA output, 72 LED's 16R+ 16G+16B+ 8W+16A RGBWA LEDs, Angle : 30°x60°, Strobe + Durotion Effect Engine, DMX- 512, Color LCD intuitive menu system, 90 - 240VAC, 240W - Power Consumption, complete in all respect with required accessories as desired by Engineer- In- Charge (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of 2x2 blinder matrix fixture with advanced COB LED technology light with Frequency : 50- 60Hz, Power Consumption: 240W LEDs Qty : 4 pieces Light Color: Single color warm white (3200K)• Lifetime: Over 50,000 hours• Dimmer: 0~100% linearly adjustable Beam Angle: 30 degree Control mode: DMX512,Master/Slave, Auto Run, Sound active. IP Grade: IP20 Net Weight: 5kgs The work shall be completed in all respect as per sound engineering practice complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of 200W LED Profile light 19 degree with below specifications :- Lamp Power : LED, 200W Power Supply : AC 110-230V, 50Hz Focus : Manual Focus , Beam Angle : 19° , Dimmer : 0-100% linearly adjustable manually focusable, high quality optical system, glass reflector. DMX Control protocol: DMX 512., CRI:>90,Dimming: 100 - 0% dimming • Control system: DMX,Auto run and master/slave, Working temp : 30-40 degree celcius,No noise fan of pccooler, Protection Rating : IP20 , CE Certified complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of 310W 7R Beam moving head complete with MSR 7R Lamp, Prism, Gobos, Colour effect functions Pan : 540° (16 bit ) Tilt : 270°(16 bit ) Advanced moving system: fast, stable and quiet, auto X-Y repositioning, Shutter: 0 – 100% Dimming and variable strobe, Option of Male female DmX in/out through 3 & 5 Pins, 14 di chroic filters +open, Duo rainbow effect, 18 rotating, indexable, gobos+open, Rotating prism: Dual 8 Facet, DmX 5pin Connectors, Power Loop-in Loop-out Optional, Focus: motorized focus, 7 Pre built programming, Electronic Flicker free operation, Dimension 415 x 343 x 495mm, LED Display Indication complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron)

Supply, installation, testing &Commissioning of 2000W Fog machine wire / remote / DMX 512, electronic control temperature. Smoke output 20000cuft/min @ 12Mtrs complete in all respect with required accessories complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron)

Supply, installation, testing & Commissioning of Diecast aluminium "C" clamp with safety pin. SWL 100 Kgs complete in all respect with required accesories as desired by Engineer- In- Charge.

Supply, installation, testing &Commissioning of Rack mount photo isolator DMX splitter unit 1 DMX input and 6 isolated output with following specifications: complete in all respect with required accessories as desired by Engineer- In- Charge. Power Supply: 90-240V AC, 45-63Hz. Control: DMX 512 protocol. Control Signal input: 5 pin XLR female. Size: 482 x 44 x128mm.Weight:2Kg. (Make: Leksa, Canara, Effectron)

Supply, installation, testing &Commissioning ofLighting console shall support the processing of up to 1024 total DMX512 outputs by use of potentiometers for submasters, playbacks and effects as well as buttons to activate cues. The console shall support up to 250 control channels for the purpose of controlling dimmers for incandescent loads. The console shall support up to 30 automated luminaires with a maximum of 40 attributes each. Each intensity channel shall be controlled on a Highest Takes Precedence complete in all respect with required accessories as desired by Engineer- In- Charge. (Make: Leksa, Canara, Effectron,Avolite)

Supply, Installation, testing & commissioning of Variable refrigerant volume / flow modular type air-conditioning system suitable to operate from 410+10% volt, 50 Hz,3 phase AC power supply for Cooling & Heating by using inverter driven capacity control compressors (Twin Rotary / Hermetically sealed scroll type) complete with individual controller and fittings with necessary wiring, connection & termination, painted MS frame/ stand for outdoor unit etc. as per quantity given below including full charging of R-410A refrigerant gas complete as per specifications. Suitable TPN isolator within MS enclosure should be Provided.Outdoors units of the VRF system shall be compact air cooled type.Each module of outdoor unit must have at least 50 % of Variable compressor which can work on Part load Suitable to operate at heat load proportional to indoor requirement.The outdoor units must be suitable for up to 225m refrigerant piping between outdoor unit & the farthest indoor units. Allowable level difference between outdoor unit & indoor units shall be 40 m in case of outdoor unit on top & 50 m in case of outdoor unit at bottom.Allowable level difference between various indoor units connected to one out door unit shall be up to 15 m.The outdoor units shall be suitable to operate within an ambient temperature range of "0 Deg C to 49 Deg C" in cooling mode; & "0 Deg C to 15 Deg C" in heating mode.The entire operation of outdoor units shall be through independent remotes of indoor units. No separate Start/ Stop function shall be Required.Starter for the Outdoor Unit compressor shall be ―Direct on Line‖ type. Inverter compressor of the unit shall start first & at the minimum frequency, to reduce the inrush current during starting.Complete refrigerant circuit, oil balancing/ equalizing circuit shall be factory assembled & tested.Outdoor unit shall have function of automatic refrigerant amount check periodically to confirm leakages.Outdoor unit shall have function of controlling evaporative refrigerant temperature to avoid cold draft, excessive cooling & for better energy efficiency.The units should comply with minimum COP of 3.2 at 100% load in cooling mode at following conditions: Outdoor Condition 35 Deg C DBT and Indoor condition: 27 deg C DBT and 19 Deg C WBT, and each module should have all inverter compressor/unit.ODU of following capacities with suitable modules as required:- 20 HP for Auditorium (20 HP X 10 NOS )

Supply, Installation, testing & commissioning of Variable refrigerant volume / flow modular type air-conditioning system suitable to operate from 410+10% volt, 50 Hz,3 phase AC power supply for Cooling & Heating by using inverter driven capacity control compressors (Twin Rotary / Hermetically sealed scroll type) complete with individual controller and fittings with necessary wiring, connection & termination, painted MS frame/ stand for outdoor unit etc. as per quantity given below including full charging of R-410A refrigerant gas complete as per specifications. Suitable TPN isolator within MS enclosure should be Provided.Outdoors units of the VRF system shall be compact air cooled type.Each module of outdoor unit must have at least 50 % of Variable compressor which can work on Part load Suitable to operate at heat load proportional to indoor requirement.The outdoor units must be suitable for up to 225m refrigerant piping between outdoor unit & the farthest indoor units. Allowable level difference between outdoor unit & indoor units shall be 40 m in case of outdoor unit on top & 50 m in case of outdoor unit at bottom.Allowable level difference between various indoor units connected to one out door unit shall be up to 15 m.The outdoor units shall be suitable to operate within an ambient temperature range of "0 Deg C to 49 Deg C" in cooling mode; & "0 Deg C to 15 Deg C" in heating mode.The entire operation of outdoor units shall be through independent remotes of indoor units. No separate Start/ Stop function shall be Required.Starter for the Outdoor Unit compressor shall be ―Direct on Line‖ type. Inverter compressor of the unit shall start first & at the minimum frequency, to reduce the inrush current during starting.Complete refrigerant circuit, oil balancing/ equalizing circuit shall be factory assembled & tested.Outdoor unit shall have function of automatic refrigerant amount check periodically to confirm leakages.Outdoor unit shall have function of controlling evaporative refrigerant temperature to avoid cold draft, excessive cooling & for better energy efficiency.The units should comply with minimum COP of 3.2 at 100% load in cooling mode at following conditions: Outdoor Condition 35 Deg C DBT and Indoor condition: 27 deg C DBT and 19 Deg C WBT, and each module should have all inverter compressor/unit.ODU of following capacities with suitable modules as required:- 18 HP

Supply, Installation, testing & commissioning of Variable refrigerant volume / flow modular type air-conditioning system suitable to operate from 410+10% volt, 50 Hz,3 phase AC power supply for Cooling & Heating by using inverter driven capacity control compressors (Twin Rotary / Hermetically sealed scroll type) complete with individual controller and fittings with necessary wiring, connection & termination, painted MS frame/ stand for outdoor unit etc. as per quantity given below including full charging of R-410A refrigerant gas complete as per specifications. Suitable TPN isolator within MS enclosure should be Provided.Outdoors units of the VRF system shall be compact air cooled type.Each module of outdoor unit must have at least 50 % of Variable compressor which can work on Part load Suitable to operate at heat load proportional to indoor requirement.The outdoor units must be suitable for up to 225m refrigerant piping between outdoor unit & the farthest indoor units. Allowable level difference between outdoor unit & indoor units shall be 40 m in case of outdoor unit on top & 50 m in case of outdoor unit at bottom.Allowable level difference between various indoor units connected to one out door unit shall be up to 15 m.The outdoor units shall be suitable to operate within an ambient temperature range of "0 Deg C to 49 Deg C" in cooling mode; & "0 Deg C to 15 Deg C" in heating mode.The entire operation of outdoor units shall be through independent remotes of indoor units. No separate Start/ Stop function shall be Required.Starter for the Outdoor Unit compressor shall be ―Direct on Line‖ type. Inverter compressor of the unit shall start first & at the minimum frequency, to reduce the inrush current during starting.Complete refrigerant circuit, oil balancing/ equalizing circuit shall be factory assembled & tested.Outdoor unit shall have function of automatic refrigerant amount check periodically to confirm leakages.Outdoor unit shall have function of controlling evaporative refrigerant temperature to avoid cold draft, excessive cooling & for better energy efficiency.The units should comply with minimum COP of 3.2 at 100% load in cooling mode at following conditions: Outdoor Condition 35 Deg C DBT and Indoor condition: 27 deg C DBT and 19 Deg C WBT, and each module should have all inverter compressor/unit.ODU of following capacities with suitable modules as required:- 16 HP

Supply, installation, testing and commissioning of following minimum capacity Hi - Wall VRV/VRF Split Type Indoor wall mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. Make- MITSUBISHI ELECTRIC / O GENERAL / DAIKIN / TOSHIBA 1.06 TR (1.3 HP ) Hi - Wall Units

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. Make- MITSUBISHI ELECTRIC / O GENERAL / DAIKIN / TOSHIBA. 4.6 TR (5.6 HP ) 4 - way Cassette Unit

Supply, Installation, testing and commissioning of Ductable Type Indoor units high static equipped with, pre-filter, fan section with suitable static fan,Corded remote ,multispeed motor, coil section with DX coil, outer cabinet, drain pan, drain pump, & Occupancy sensor and Floor temperature sensor, insulation, pipe connections, variable evaporative temperature control etc. of various capacities as per specifications and drawings. 2.65 TR ( 3.2 HP ) High Static Ductable Unit

Supply, Installation, testing and commissioning of Ductable Type Indoor units high static equipped with, pre-filter, fan section with suitable static fan,Corded remote ,multispeed motor, coil section with DX coil, outer cabinet, drain pan, drain pump, & Occupancy sensor and Floor temperature sensor, insulation, pipe connections, variable evaporative temperature control etc. of various capacities as per specifications and drawings. 6.6 TR ( 8.0 HP ) High Static Ductable Unit

Supply, Installation, testing and commissioning of Double Skin Air Handling Unit with panel thickness of 25 mm, with static pressure mentioned below of equipped with pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, pipe connections, of various capacities as per specifications and drawings.Make : Edge Tech / Citizen / Daikin. Ceiling Suspended AHU - 5.5 TR,2200 CFM, 4 RD 60 mm Static

Supply, Installation, testing and commissioning of Double Skin Air Handling Unit with panel thickness of 25 mm, with static pressure mentioned below of equipped with pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, pipe connections, of various capacities as per specifications and drawings.Make : Edge Tech / Citizen / Daikin. AHU - 16.5 TR,6600 CFM, 6 RD 125 mm Static

Supply, Installation, testing and commissioning of Double Skin Air Handling Unit with panel thickness of 25 mm, with static pressure mentioned below of equipped with pre-filter, fan section with suitable static fan, multispeed motor, coil section with DX coil, outer cabinet, drain pan, pipe connections, of various capacities as per specifications and drawings.Make : Edge Tech / Citizen / Daikin. AHU - 14 TR, ,5600 CFM, 6 RD 65 mm Static

Supply, Installation, testing and commissioning of AHU Kits for the following capacities AHU Kit + Control Box.Make : O General, Mitsubishi Electric, Daikin,TOSHIBA.

Supply, installation, testing and commissioning of following Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multi including acessories, insulated with XPLE Class-O closed. 6.4 mm dia (1/4) 19mm Thickness with insulation

Supply, installation, testing and commissioning of following Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multi including acessories, insulated with XPLE Class-O closed. 9.5 mm dia(3/8) (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, installation, testing and commissioning of following Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multi including acessories, insulated with XPLE Class-O closed. 12.7 mm dia (1/2)(OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, installation, testing and commissioning of following Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multi including acessories, insulated with XPLE Class-O closed. 15.86 mm dia(5/8) (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, installation, testing and commissioning of following Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multi including acessories, insulated with XPLE Class-O closed. 19.1 mm dia(6/8) (OD) (hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, installation, testing and commissioning of following Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multi including acessories, insulated with XPLE Class-O closed. 22.2 mm dia (OD)(7/8) (hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, installation, testing and commissioning of following Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multi including acessories, insulated with XPLE Class-O closed. 25.4 mm dia (OD) (hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Supply, installation, testing and commissioning of following Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multi including acessories, insulated with XPLE Class-O closed. 28.58 mm dia (11/8)(OD) (hard drawn) with tube thickness 1.2 mm with 19 mm thick insulationtion

Supply, installation, testing and commissioning of following Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multi including acessories, insulated with XPLE Class-O closed. 31.8 mm dia (OD) (hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

Supply, installation, testing and commissioning of following Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multi including acessories, insulated with XPLE Class-O closed. 34.9 mm dia(13/8) (OD) (hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

Supply, installation, testing and commissioning of following Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multi including acessories, insulated with XPLE Class-O closed. 41.3 mm dia(15/8) (OD) (hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

Refrigerant R-410A to top up the system.

Supply,installation, testing and commissionig of refrigerant Copper Y-joints and T-joints. Make- MITSUBISHI ELECTRIC / O GENERAL / DAIKIN / TOSHIBA

Supply,Installation, Testing and Commissioning of Master Remote Control panel including all necessary control wiring. Master Remote Control Panel shall be connected to all indoor/outdoor units. Master Remote Control Panel shall be one touch screen type. Suitable for indoor units. Make- MITSUBISHI ELECTRIC / O GENERAL / DAIKIN / TOSHIBA

Providing and fixing (uPVC) pipes, having thermal stability for water supply, including all uPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Make- Supreme/Astral/Ashirwad Item-18.7.4 25 mm nominal outer dia Pipes.

Providing and fixing (uPVC) pipes, having thermal stability for water supply, including all uPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Make- Supreme/Astral/Ashirwad Item-18.7.4 32 mm nominal outer dia Pipes.

Providing and fixing (uPVC) pipes, having thermal stability for water supply, including all uPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Make- Supreme/Astral/Ashirwad Item-18.7.4 40 mm nominal outer dia Pipes.

Providing and fixing (uPVC) pipes, having thermal stability for water supply, including all uPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Make- Supreme/Astral/Ashirwad Item-18.7.4 50 mm nominal outer dia Pipes.

Supply, installation and commissioning of Site fabricated Alluminum rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Thickness 1.0 mm ,20G

Supply, installation, testing and commissioning of Nitrile rubber class-O closed cell XPLE Fire retardant insulation of 13mm thick pasted on the duct with suitable adhesive complete in all respects with Nitrile tapes. Make : A-Flex, Armacell, K-Flex

Supply, installation, testing and commissioning of canvas for outlet connection of the equipments.

Supplying, fixing testing commissioning of powder coated aluminium air grill With Damper and Bird screen.

Supply and fixing of Perforated type 200 (w)x 100 (d) x1.6 (thickness) Hot dip Galvanised G.I. cable tray With Cover complete with bend/tee joints, coupling plate & nuts bolts etc. as required for fixing complete.

Supply and Laying of 2 core x 1.5 sqmm pvc insulated copper conductor communication control cable in Pvc Conduit. Make : Havells/Polycab/Anchor.

Supply and Laying of 4 core x 2.5 sqmm pvc insulated copper conductor communication control cable in Pvc Conduit. Make : Havells/Polycab/Anchor.

Microprocessor Based 1-loop, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with LCD display, keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working. Designed to meet UL864, 10th Edition and FM complete in all respect with required accesories as desired by Engineer- In- Charge. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL

Addressable Multi-criteria Photo-Thermal Detector with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Designed to meet UL268, 7th Edition. FM Approved. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL

Addressable Beam Detector. The beam detector shall be used for High Ceiling application with a detection range upto 100 mtrs having 4 manual & 2 auto sensitivity settings. The beam detector shall be True addressable installed on the SLC circuite & communicate directly with the panel without any interface module. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL

Addressable Manual Call Point (Pull down / Break Glass Type). The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL

Addressable Control Module for Sounders / Strobes / Sounder cum Strobes. The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL.

Addressable Relay Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs. The relay module shall provide contact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Makes: Notifier/ IFC/ Neptune Fire(USA)/ SCHRACK/ FENWEL.

Sounder cum Strobe rated at 80 dBA @ 3m for Audible annunciation and 115cd flashintg at 1 Hz for visual indication. UL Listed complete in all respect with required accesories as desired by Engineer- In- Charge.

Directional Sounders with 20 hz to 20 khz operating frequency with minimum 8 distinct sound patterns to indicate corridors, Exit doors, Move upward, move downward etc. to direct Occupants for fast & safe Evacuation complete in all respect with required accesories as desired by Engineer- In- Charge.

Supply and erection of 40 Watt 2*2 light for ceiling complete with all connections and accessories etc. as required by Engineer -In-Charge.Makes: Havells/ Crompton/ Polycab/ Wipro.

Supply and erection of 12 Watt COB down lighter aluminium housing for ceiling. complete with all connections and accessories etc. as required by Engineer -In-Charge.Makes: Havells/ Crompton/ Polycab/ Wipro.

Supply and erection of LED flexion strip for ceiling and cove. complete with all connections and accessories etc. as required by Engineer -In-Charge.Makes: Havells/ Crompton/ Polycab/ Wipro.

Supply and erection of rechargeable Emergency Exit light for auditorium as per Fire safety specifications complete in all respect with required accesories as desired by Engineer- In-Charge.Make:Crompton/Wipro/Polycab/Jaquar

S/E of 2/3 watt footlight for stairs complete in all respect with required accesories as desired by Engineer- In- Charge. Make:Crompton/Wipro/Polycab/Jaquar or equivalent make as approved by EIC.

Supply and eraction of Double conversion true Online UPS 40 KVA 415V,50Hz ,input 3 phase, output 3phase, IGBT based rectifier and inverter based design. Key feature THDi < 5% , input power factor ~ 0.99 ,High AC-AC efficency, soft start capability, advanced battery management technology(ABM), communication and remote monitering capability LAN, WAN. approved sealed maintenance free (SMF) batteries 42AH, 32nos, 12V to give approx 25-30 min backup at your running load. supply of various accessories like battery circuit breakers, UPS to battery cables sets (up to 5 m route length) total 20 mtr length, Linkset, MS battery Racks for batteries and battery caps With parallel synchronization and 3 year Warrenty. complete in all respect as approved and desired by engineer incharge at site.Make:- EATON ,APC, ABP , Microtek

Swadeshi Civil Infrastructure Pvt Ltd (BID ID -602283)

Swadeshi Civil Infrastructure Pvt Ltd (BID ID -602283)