REPAIR/ REPLACEMENT OF ELECTRICAL SYSTEM TO OFFR MD ACCN, CENTRAL INSTITUTION AND OTHER MISC ITEMS AND REPAIR/ REWINDING OF CEILING FAN, EXHAUST FAN AND OTHER CONNECTED ITEMS UNDER GE (EAST ) FEROZEPUR CANTT

Amount

Taking down carefully existig copper/ alumn point wiring for light/ fan/ bell/ socket 5/15 Amp points complete with fitting and fixtures such as Switches, Sockets, Ceiling Rose, Lamp Holder and bracket fittings with Battens/ Conduits/ Wires and making good the disturbed surfaces of walls and roofs etc to match with existing surface complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards (single phase or three phase) of any capacity with Isolators/ MCBs/ MCCBs complete all as specified and directed.

Taking down carefully old unserviceable sub main wiring and making good disturbed surfaces and matching with existing complete all as directed and specified

M&L Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets and various sizes hylam sheets for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified for following :- (a) One light/ fan/ bell/ Bldg security light point controlled by one single pole one way switch. (Note:- wiring shall be done in colour coding)

All as per item No. 04 here in before but one 3 pin, 5 Amp, socket outlet on the independet board complete all as specified and directed.

All as per item No. 04 here in before but one 3 pin, 5 Amp, socket outlet on the same board complete all as specified and directed.

All as per item No. 04 here-in-before but wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

All as per item No. 04 here-in-before but wiring with 4 sqmm copper cable and 4 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

M&L Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through existing PVC/ Steel conduit, accessories and existing sunken boxes, including bakelite sheets and various sizes hylam sheets for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified for following :- (a) One light/ fan/ bell/ Bldg security light point controlled by one single pole one way switch. (Note:- wiring shall be done in colour coding)

All as per Item No. 09 here in before but for One 3 pin, 5 Amp, socket outlet on the independet board complete all as specified and directed.

All as per Item No. 09 here in before but for One 3 pin, 5 Amp, socket outlet point on the same board complete all as specified and directed.

All as per item No.09 here in before but wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire drawn through existing PVC/ Steel conduits, accessories and existing sunken boxes for one 6 pin 5/ 16 Amps socket out let on independent board complete all as specified and directed.

All as per item No.09 here in before but wiring with 4 sqmm copper cable and 4 Sqmm copper cable as continuous earth wire drawn through existing PVC/ Steel conduits, accessories and existing sunken boxes for one 6 pin 5/ 16 Amps socket out let on independent board complete all as specified and directed.

S&F 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and directed.

S&F Bell push flush, type 6 amp single pole one way, white in colour, duly ISI marked complete all as specified and directed.

S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed.

S&F 6 Amps Socket 2 in 1, Urea backpiece (IP20), white in colour, duly ISI marked complete all as specified and directed.

S&F Socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and directed.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed.

S&F rotary stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, deluxe, white in colour, duly ISI marked complete all as specified and directed.

S&F 20W, 6500 K, 4 feet LED Square tube light fitting, energy efficient fixed to wall/ ceiling etc complete all as specified and directed.

S&F LED bulb of 9 watt, B22, 6500K all as specified and directed.

S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified and directed.

S&F Modular Switch one way, 1 module, 10 Amp, Single pole, 240 volts complete all as specified and directed.

S&F Modular Bell push 6 Amps, one module, 240 volts complete all as specified and directed.

S&F Modular Switch one way, 1 module, 16 Amp, Single pole, 240 volts complete all as specified and directed.

S&F Modular Socket outlet 6 Amps, 2/3 pin combined, 2 module, multipupose complete all as specified and directed.

S&F Modular Socket outlet 6/ 16 Amps, 2/3 pin combined, 2 module, multipupose complete all as specified and directed.

S&F Modular ceiling fan regulator electronic stepped type heavy duty 120W, 250 volts flush type complete all as specified and directed.

S&F Recess and surface mounting LED backlite panel 50W, 6500K, Box type, 600mm X 600mm made of CRCA sheet duly powder coated with high efficient LEDs & glare free full opal diffuser IP20 complete all as specified and directed.

S&F LED sleeky bldg street light (Lens) fitting of 35 watts, 6000K, including GI bracket bend to shape made out of GI pipe light grade of 25 mm, size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire of size 23/00.0076 complete all as specified and directed.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S. sheet, powder coated, partly embedded in wall, IP-43 protection, VTPN DB with 200 Amps rated bus bar, 4 way, 415 volts, vertical type, dust and vermin proof, suitable for incorporation of MCCBs/ MCBs, factory made, including thermal based release adjustable type 4 pole 63 Amps, 50 Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 8 way, IP-43 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly partially immersed in wall, factory made, including making good distrubbed surfaces with matching colour, complete all as specified.

S&F MCCB thermal based release adjustable type 4 pole 100 Amps 50 Hz 415 Volts with rupturing capacity 16 KA including testing, complete all as specified and as directed.

S&F MCB SPN, 40A-60A, 240 volts, "C" series, 10KA duly ISI marked, complete all as specified and directed.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and directed.

S&F Sub main wiring with two single core 2x6 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 6 sqmm drawn in and including 25 sqmm PVC rigid conduit connected to main board complete all as specified and directed. (Note:-Two number cable, one number earth wire and conduit shall measured together as unit length).

S&F Sub main wiring with two single core 2x4 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 4.0 sqmm drawn in and including 25 sqmm PVC rigid conduit connected to main board complete all as specified and directed. (Note: Two number cable, one number earth wire and conduit shall measured together as unit length).

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of 10 Sqmm complete all as specifed.

S&F Wall mounted bracket light fitting including frosted glass globe and 20W 3U DF CFL complete all as specified and directed. Make- Crompton, Cat Part No.WLR20/G or equivalent cat part in make Havells/ Bajaj/ Wpro/ Philips.

S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 10 Sqmm nominal cross section, 2 core, PVC insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing with double compression copper stain less steel gland at DBs and testing, complete all as specified. Note:- Excavation & earthwork, brick cable protection, sand cushion shall be measured and paid separately)

S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, PVC insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing with double compression copper stain less steel gland at DBs and testing, complete all as specified. Note:- Excavation & earthwork, brick cable protection, sand cushion shall be measured and paid separately)

Excavation in trenches in soft/ loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and not exc 10 Sqm on plan, for laying of cable and getting out, compete all as specified.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. Note- Punned down thickness shall be measured.

S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified.

Returning, filling in, earth including spreading, leveling watering and well ramming in layers each not exceeding 25cm thick each layer, complete all as specified.

Removal of surplus soil to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.5 metre above the starting point complete all as specified.

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/ walls, laid under floor/ road crossings, complete with and including clamps socket & elbow etc complete all as specified.

Taking down defective Ceiling fan of size 1200mm sweep from ceiling/ wall height upto 3 mtrs to 5 mtrs, dismantling blades and transporting to work shop/ store, stripping up the fans of any make/ size, checking , testing, over hauling , greasing , including taking out u/s spare parts and replacing with new parts, reassembling including fixing of blades, replacement of blade screws, split pins (where required) and testing for its satisfactory running, hanging the fans in position complete all as specified and directed. Note : (i) Replacement of unserviceable spare parts such as ball bearing, bushe, capacitor, fan blade, canopy and shaft shall be measured and paid separately as supply only under relevant item of Sch 'A' (ii) Rewinding shall be measured and paid separately. (iii) The cost cleaning, greasing & refixing in position upto height 3mtrs to 5 mtrs is deemed to be inclusive in the unit rate quoted by the contractor.

All as per item No 50 here in before but Ceiling fan of size 1400 sweep

All as per item No 50 here in before but Cabin fan/ Bracket fan/ wall mounted fan size 16" sweep

All as per item No 50 here in before but Air Fresh fan/ Exhaust PVC of size 200mm/ 230mm sweep

All as per item No 50 here in before but Exhaust fan of size 300 mm sweep

All as per item No 50 here in before but Exhaust fan of size 380 mm sweep

All as per item No 50 here in before but Exhaust fan of size 450 mm sweep

All as per item No 50 here in before but Air circulator/ Pedastal fan of size 25" sweep.

Taking out the old burnt out winding from the fan, rewinding with super enameled superior quality copper conductor winding with similar gauge & size as per original including sleeves, varnishing etc Ceiling fan of size 1200mm sweep complete all as specified & directed.

All as per item No 58 here in before but Ceiling fan of size 1400 sweep

All as per item No 58 here in before butCabin fans/ Bracket fans/ wall mounted fans size 16" sweep

All as per item No 58 here in before but Air Fresh fan/ Exhaust PVC of size 200mm/ 230mm sweep

All as per item No 58 here in before but Exhaust fan of size 300 mm sweep

All as per item No 58 here in before but Exhaust fan of size 380 mm sweep

All as per item No 58 here in before but Exhaust fan of size 450 mm sweep

All as per item No 58 here in before but Air circulator fans/ Pedastal fans of size 25" sweep.

Supply only Ball bearing No.6201/ 6202 suitable for Ceiling fan/ Exhaust fan/ cabin fan/ Air circulator complete all as speified.

Supply only Bush suitable for any type of ceiling fans, exhaust fan, cabin & Air circulator including mechanical laithe work etc complete all as specified and directed.

Supply only shaft suitable for any type of ceiling fan, exhaust fan, cabin & Air circulator including mechanical laithe work etc complete all as specified and directed.

Supply only Fan capacitor of 2.5 MFD, capacity ISI marked madeup of plastic with copper terminal wire incl MS/PVC clamp of required size complete all as specified.

Supply only Fan capacitor of 3.15 MFD, capacity ISI marked madeup of plastic with copper terminal wire incl MS/PVC clamp of required size complete all as specified.

Supply only Fan Motor run capacitor of 4.0 MFD, capacity ISI marked madeup of plastic with terminal lugs incl MS/PVC clamp of required size complete all as specified.

Supply only Fan blades with suitable screw for 1200mm sweep ceiling fan complete all as specified (set of three blades).

Supply only Fan blades with suitable screw for 1400mm sweep ceiling fan complete all as specified (set of three blades).

Supply only plastic canopy (set of 02) with screw suitable for 1200/1400mm sweep complete all as specified.

Supply only exhaust fan motor 0.12 HP, suitable for 300mm sweep size of exhaust fans, AC single phase, 50 Hz, 1500 RPM, frame- B42, double bearing, trusted copper winding, high speed all as specifed and directed.

Supply only exhaust fan motor 0.16 HP, suitable for 380mm sweep size of exhaust fans, AC single phase, 50 Hz, 1500 RPM, frame- B42, double bearing, trusted copper winding, high speed all as specifed and directed.

Supply only exhaust fan motor 0.25 HP, suitable for 450mm sweep size of exhaust fans, AC single phase, 50 Hz, 1500 RPM, frame- B48, double bearing, trusted copper winding, high speed all as specifed and directed.

M&L for two coat of painting for ceiling fans complete with synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc complete all as specified and directed.

Supply and fixing of Exhaust fans MS frame complete with legs (set of four) including rubber as per sample for 300mm sweep complete including removal of old U/S frame all as specified.

Supply and fixing of Exhaust fans MS frame complete with legs (set of four) including rubber as per sample for 380mm sweep complete including removal of old U/S frame all as specified.

Supply and fixing of Exhaust fans MS frame complete with legs (set of four) including rubber as per sample for 450mm sweep complete including removal of old U/S frame all as specified.

Supply and fixing in replacement of fan blade for Exhaust fan 300 mm sweep all as specifed and directed.

Supply and fixing in replacement of fan blade for Exhaust fan 380 mm sweep all as specifed and directed.

Supply and fixing in replacement of fan blade for Exhaust fan 450 mm sweep all as specifed and directed.

Supply and fixing in replacement of hanging clamp of required size with rubber real nuts, bolts including spring washers and locking of splite pin of suitable size for 1200/1400 sweep ceiling fan complete all as specified.

S&F three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified.

S&F in replacement of down rod 30cm long incl cutting holes etc suitable for ceiling fan complete all as specifed and directed.

S&F in replacement of down rod 60cm long incl cutting holes etc suitable for ceiling fan complete all as specifed and directed.

S&F in replacement of down rod 90cm long incl cutting holes etc suitable for ceiling fan complete all as specifed and directed.

S&F in replacement of down rod 1.2mtr long incl cutting holes etc suitable for ceiling fan complete all as specifed and directed.

HAPPY ELECTRICALS

Karan Engineers

M/s Bansi Lal

BHUI ENTERPRISES