Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹22.3 LAccepted-Finance | 1 | Accepted-Finance Technical and financial bid are in order. |
Tender Value
₹22.9 L
EMD Value
₹45,847
Closing Date
1 Mar 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, NACD, APWD, Mayabunder
EE, NACD, APWD, Mayabunder
Conversion of existing room into the proposed Vulnerable Witness Deposition Court Room in the First Floor of District Court Building, NM Andaman at Lucknow, Mayabunder including IEI.
2023_APWD_9366_1
NIT NO.76/2022-23/EE/NACD
Open Tender
Civil Works - Buildings
Works
180 days
EE, NACD, APWD, Mayabunder
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹45,847
3 Mar 2023
15 Feb 2023
2 Mar 2023
15 Feb 2023
1 Mar 2023
15 Feb 2023
Amount
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources).
Centering and shuttering including strutting, propping etc. and removal of form for
Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
Fixed to openings /wooden frames with rawl plugs screws etc.
Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
Providing and fixing bright finished brass handles with screws etc. complete:
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.
30 mm thick plain PVC door shutters
Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).
6 mm thick Cement fiber board as per IS: 14862
12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
1:6 (1 cement: 6 fine sand)
Finishing walls with Acrylic Smooth exterior paint of required shade :
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge.
For door/ window/ clerestory window
Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
Of area 3 sq. metres and below
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
For thickness of tiles above 25 mm and up to 40 mm
Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required :
W.C. pan with ISI marked white solid plastic seat and lid
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever require:
White Vitreous China Wash basin size 550x400 mmwith a pair of 15 mm C.P. brass pillar taps
Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete.
Semi rigid pipe i) 32 mm dia
Providing and fixing mirror of superior glass (of approved quality) andof required shape and size with plastic moulded frame of approvedmake and shade with 6 mm thick hard board backing :
Oval shape 450x350 mm (outer dimensions)
Providing and fixing soil, waste and vent pipes :
100 mm dia i) Sand cast iron S&S pipe as per IS: 1729
Providing and filling the joints with spun yarn, cement slurry andcement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
100 mm dia pipe
Providing and fixing M.S. holder-bat clamps of approved design toSand Cast iron/cast iron (spun) pipe embedded in and includingcement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size),including cost of cutting holes and making good the walls etc. :
For 100 mm dia pipe
Providing and fixing plain bend of required degree.
100 mm dia i) Sand cast iron S&S pipe as per IS: 1729
Providing and fixing single equal plain junction of required degreewith access door, insertion rubber washer 3 mm thick, bolts andnuts complete.
100x100x100 mm i) Sand cast iron S&S as per IS - 1729
Providing and fixing terminal guard :
100 mm i) Sand cast iron S&S as per IS - 1729
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall
20 mm dia nominal bore
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :
15 mm dia nominal bore
Providing and fixing uplasticised PVC connection pipe with brass unions :
45 cm length i) 15 mm nominal bore
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
15 mm nominal bore
20 mm nominal bore
Constructing C.C manhole 1:3:6 (1cement :3coarse sand:6 graded stone aggregate 40mm nominal size) with 15cm thick R.C.C. top slab of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), & 200mm thick foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggreate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
Providing and Fixing glass panes in the louvers of wooden Fixed ventilators all complete with
Float Glass Panes of 4.00 mm thickness (Weight not less than 7.5Kg/Sqm).
Providing and fixing bright finished brass sliding door bolts of approved quality & make with necessary screws etc. complete :
Providing and fixing bright Finished Stainless steel Hanging type Floor Door Stopper with necessary screws etc, complete.
Providing and fixing of C.P. health faucet of approved quality ( Of Jaguar Make )
Providing and fixing C.P. towel ring as approved by Engineer-in-charge with concealed fittings arrangement of approved quality and colour (Of Jaguar Make)
Size of minimum 250mm or above.
Providing and fixing C.P. soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 grams (Of Jaguar Make)
Providing and fixing 2 in 1 C.P. brass bib cock of approved quality conforming to IS:8931. (Of Jaguar Make)
15mm nominal bore.
Providing and fixing toilet paper holder : a) C.P. brass (Jaguar or equivalent).
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality. (Of Jaguar Make)
15mm nominal bore.
Providing and laying Antiskid floor tiles (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete.
Size of Tile 600 x 600mm
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:
Two or more coats on new work
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastners of required dia & length (hold fast lugs or dash fastner shall be paid for separately) :
Ist class Padauk wood category-I (A)
Providing and fixing 35 mm thick glazed shutters for windows with class-I padauk wood category No-I(A) as per IS: 401 using 7.5 kg/Sqm (4 mm thick) glass panes including ISI marked stainless steel butt hinges of required size with necessary screw etc. complete as per direction by Engineer-in-charge.
Providing and fixing 35mm thick panelled or panelled shutters for doors with class-I padauk wood including ISI marked stainless steel butt hinges of required size with necessary screws including panelled with 12mm thick class-I paduak planks. a) Ist class Padauk wood category-I (A)
Providing and fixing wooden moulded beading (of beveled edge on one end) to the door shutter panels with iron screws, plugs & priming coat of unexposed surface etc. complete with 1st class Padauk wood.
Providing and fixing 18 mm thick, 150 mm wide pelmet of 1st class padauk wood including top cover of 12mm 1st class padauk wood planks, nickel plated M.S. pipe 20 mm dia ( heavy type ) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long and rawl plugs 50 mm long etc. all complete
Melamine polishing (Matt finish) on new work by scrapping & removing the deposits in wood works with grinding machine cleaning the wood with natural culour and smoothining the surface with sand paper of different size & applying melamine polish (Matt finish) comprising of two coats of pillar & rubbing with water paper & drying filler for 6 to 8 hours, applying two coats sealer and rubbing with water paper applying two coats of melamine polish etc. complete.
Providing and laying hollow block cement concrete block walling 200mm thick consisting of hollow block of size 400mm x 200mm x 200mm of mix 1:3:6 (1 cement; 3 coarse sand; 6 graded stone aggregate 10mm nominal size) having a crushing strength of 3.5 N/Sqm at 28 days as per IS:2185 (Part-I) 1979 laid in cement mortar 1:6 (1 cement; 6 coarse sand) upto floor five level.
Providing and laying hollow block cement concrete block walling 100mm thick consisting of hollow block of size 400mm x 100mm x 200mm of mix 1:3:6 (1 cement; 3 coarse sand; 6 graded stone aggregate 10mm nominal size) having a crushing strength of 3.5N/Sqm at 20 days as per IS:2185 (Part-I) 1979 laid in cement mortar 1:6 (1 cement; 6 coarse sand) upto floor five level.
Providing and fixing on wall face unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
50 mm dia pipe.
Providing and fixing pvc door bend of required degree for PVC Pipe.
50mm dia
Providing and fixing pvc plain bend of required degree for PVC Pipe.
50mm dia
Providing and fixing Stainless Steel grating of approved quality as per direction of EIC.
Wall Grating Square Type of 4 inches to 5 inches size.
Providing & Fixing 1st class padauk wooden handrail for a witness box in court room of size lengh 1.20m x 1.10m breadth and 1.00m ht along the sides of witness box keeping one side open for access having 4nos of designer end posts of 3"x3" size i/c round top with curving , 06nos of balusters of 2"x2" section with turned design placed 200mm c/c apart along two sides of witness box and 05 nos of baluster of 2"x2" section with turned design. placed 200mm c/c apart in one side only, top & bottom rail of 4"x3" section with top edge rounded off in 3 sides only all complete finished with 02 coats of melamine polish over a coat of honey/natural colour, wood filler putty etc i/c preparation & apply sand paper finishing to a glossy mat finish as per ISO specifications complete.The sample brand to be used shall be got approved from EIC prior to execution of work.
Providing & Fixing 1st class padauk wooden handrail for court staging (of judge in court room) of size- length 4.50m & 1.15m height having 02nos of designer end posts of 3"x3" size i/c round top with curving , 22nos of balusters of 2"x2" section with turned design placed 200mm c/c apart, with top & bottom rail of 4" x 3" section with top edges rounded off all complete finished with 02 coats of melamine polish over a coat of honey/natural colour, wood filler putty etc i/c preparation & apply sand paper finishing to a glossy mat finish as per ISO specifications complete.The sample brand to be used shall be got approved from EIC prior to execution of work.
Providing & Fixing 30cm high wooden staging flooring with 25mm thick panels i/c wooden plugs complete with necessary screws over the frame work consisting of rquired no. of wooden posts and wall plate section (5"x5" and 6"x3" respectively) tied altogether complete of 1st class padauk wood and outerside front panelling made (with grooved vertical faces at suitable intervals shall be done with 12mm thick superior quality padauk panels edge glued finger joint exposed surface may be finished with melamine matt/ glossy finish as per the directions of EIC.
Providing & Fixing 15cm high wooden staging for bench clerk/witness box in the court room stage of flooring with 25mm thick planks i/c wooden plugs complete with necessary screws over the frame work consisting of rquired no. of wooden posts and wall plate section (5"x5" and 6"x3" respectively) tied altogether complete of 1st class padauk wood and outerside front panelling made (with grooved vertical faces at suitable intervals shall be done with 12mm thick superior quality padauk panels edge glued finger joint and completely finished with melamine matt/ glossy finish as per the directions of EIC.
Providing Ejlash table of First class padauk wood (for judges) PO of size 1.50m length, 0.90m top width & 0.80m top height from floor with two sides cabinet comprising of top drawers unit and below storage box unit with openable shutters in each & bottom foot rest all complete finished with 02coats of Melamine polish over a coat of honey/natural color , wood filler putty etc i/c preparation and applying sand paper finishing to a glossy mat finish as per ISO specifications i/c table top edge moulding shall be as per design details & necessary hardware fittings may be provided (Bright finished brass hinges with necessary screws, brass handle,, magnetic catcher with locking arrangement wherever required in cabinet & drawer)
Supply of wooden chair made of 1st Class padauk wood ornamental type with high back rest chair & cushion seat for Ld.ADJ in the proposed Vulnerable Witness Deposition Court.
Providing ordinary office table made of First class padauk wood of size 1.20m length, 0.90m top width & 0.80m top height from floor without side cabinets & with bottom foot rest & top drawer units i/c its brass fittings all complete finished with 02coats of Melamine polish over a coat of honey/natural color , wood filler putty etc i/c preparation and applying sand paper finishing to a glossy mat finish as per ISO specifications i/c table top edge moulding shall be as per design details.
Providing ordinary office table made of First class padauk wood of size 1.10m length, 0.75m top width & 0.80m top height from floor without side cabinets, top drawers & with bottom foot rest all complete finished with 02coats of Melamine polish over a coat of honey/natural color , wood filler putty etc i/c preparation and applying sand paper finishing to a glossy mat finish as per ISO specifications i/c table top edge moulding shall be as per design details.
Providing ordinary wooden chairs made of First class padauk wood finished with melamine polish.
Providing argument desk made of 1st class padauk wood finished with melamine polish as per the directions of Engineer-in-charge.
Providing wooden long bench made of First class padauk wood of length 2.00m, having seat of top width 0.42m without side hand rests and back rests, for a height upto 0.60m from bench seat top,provided with bottom foot rest all complete finished with 02coats of Melamine polish over a coat of honey/natural color , wood filler putty etc i/c preparation and applying sand paper finishing to a glossy mat finish as per ISO specifications and directions of EIC.
Providing 1st class Padauk wooden sofa (03 seater) with cushions i/c steel hinges fittings and melemine polish with air compressor complete.
Providing 1st class padauk wooden Teapoy of approved design & of Size 2½' (L) x 1½' (W) with top corners & edges rounded off all complete jointed as per the specifications and finished with 02 coats of melamine polish applied by gun spraying machine.
Providing 1st class padauk wooden File rack of approved design & of Size 4'(L) x 1½' (W) x 3'(H) with 03Nos of Shelves using 1inch wooden planks stacked one over other jointed with side vertical planks all complete finished with 02 coats of melamine polish applied by gun spraying machine.
Providing and Fixing one way glass vision panel for the accussed room with wooden moulded beadings etc complete as per the architectural drawings and the direction of Engineer in Charge. (Cost of wooden moulded beading shall be paid separately).
One Way Glass Panes of 5.50 mm thickness (Weight not less than 20Kg/Sqm)
Providing and Fixing 15mm thick 1st Class Padauk Wood paneling in the fixed doors/Partitions as directed by EIC forming rectangle shaped projected panels in the vertical pattern wise i/c wooden plugs with necessary screws,fevicol etc.
Providing and Fixing 1st Class Padauk decorative type wooden beading with edges rounded off all around the one way glass vision panel i/c fixing with necessary screws etc. complete Beading of size 2" x 1½"
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.
Ist class Padauk wood category-I (A)
Providing wooden long bench made of First class padauk wood of length 2.00m, having seat of top width 0.42m with side hand rests and provided with back rest for a height upto 0.60m from bench seat top,provided with bottom foot rest all complete finished with 02coats of Melamine polish over a coat of honey/natural color , wood filler putty etc i/c preparation and applying sand paper finishing to a glossy mat finish as per ISO specifications and directions of EIC
Providing and fixing beveled edged beading 50 x 18 mm section of HDF boards with screws / nails of approved quality for ceiling works.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (Of brand Dorma, Godrej or equivalent)
Providing & Fixing 1st class padauk wooden handrail for stair sides at the court staging (of judge in court room) of required- length & 1.15m height having 02nos of designer end posts of 3"x3" size i/c round top with curving , intermediate balusters of 2"x2" section with turned design placed 200mm c/c apart, with top & bottom rail of 4" x 3" section with top edges rounded off all complete finished with 02 coats of melamine polish over a coat of honey/natural colour, wood filler putty etc i/c preparation & apply sand paper finishing to a glossy mat finish as per ISO specifications complete.The sample brand to be used shall be got approved from EIC prior to execution of work.
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.
Group B
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
100 mm X 100 mm X 60 mm deep
200 mm X 125 mm X 60 mm deep
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
5/6 amps switch
Telephone socket outlet
TV antenna socket outlet
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
Upto 450 mm sweep
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
Supplying of LED Adore 10 W 3 star rating B22 CDL lamp similar to Make: Havells Cat No. LHLDEUEEML8R010 6500K or its equalent to ISI standard.
Supplying of Batten for LED tubes equivalent to HAVELLS REGALBATTENT8UPTO1X22WSSBSWH including 20W LED Tube lamp equivalent to HAVELLS CRYSTAL GLASS LED TUBE LIGHT (Double side connection) Cat No. CRYSTALT81213DSTL20WLED865SGLASS complete or its equivalent to ISI standard.
Supplying of 8 W Mirror light self ballasted LED Batten, extruded thermoplastic body with PC diffuser in unique square shape, >180º wide distribution equivalent to Polycab INTENSO LXS LED BATTEN - PC PROFILE Cat No. INTENSO LXS LED BATTEN 1 FEET 8W 6500K complete or its equivalent to ISI standard etc. as required.
Supplying, installing, testing and commissioning of 1.5 Ton capacity 5 star (As per 2018 BEE star rating) inverter high wall split type Air Conditioner (Rotary compresso 1 phase 220 volt) Make: HITACHI KASHIKOI 5100X Model RSOS518HCEA or equivalent with maximum cooling capacity of atleast 5250 Watts (with copper condenser coil) including providing standard length of refrigeration copper pipe kit, cutting, drilling of minimum 100mm dia holes on the wall for passing gas pipes, fixing suitable size PVC pipe on the wall through the holes and cementing, painting to give an even look and smooth finish, wrapping PVC non adhesive white tape over insulation of gas pipe etc. including 01 No. 4 KVA Voltage Stabilizer equivalent to make V-Guard VG 400 and pre-fabricated stand for outdoor unit as required and as per the direction of Engineer - in - charge.
Supplying of Ceiling fan 1200 mm sweep 5 star with BLDC motor and remote equivalent to make Bajaj Model No.ENERGOS 32 1200MM White CF or its equivalent to ISI standard complete with all accessories as required.
Supplying, installation, testing and commissioning of Video Conferencing system for 03 chennal network system that is 03 Nos. Video Conference device, 03 Nos. LED Display, Video interface device with interconnection etc. as required.
i) Web Camera for video conferencing with Mic, Zoon Lens Technology and wide area coverage Make: Logitech - 03 Nos. ii) Unified Video Conferencing Display System with Software and utilities, 22" LED Smart operating System with cooling tower Make: Asus - 03 Nos. iii) Amplifier 150 with cable mono and other allied cable for complete the fitting and installation Make: BOSCH - 01 No. iv) Column Speaker Bar type for suppor Audio System Make: BOSCH - 03 Nos. v) 2 KVA online UPS with 06 hours Battery Backup System including battery and stand Make: APC - 01 No. vi) LAN Networking with Cat-6 Cable and Switches for Network three nods Make: D-Link - 01 Lot. vii) M78 one to one Phone Make: Beetle - 01 Pair
Supplying, installation, testing and commissioning of Wall Fan 400mm sweep of equivalent to make Orient Model Wall Fan 400mm wall 41 or its equivalent to ISI standard.
Supplying of Domestic exhaust fan 300mm sweep equivalent to Orient Electric 300mm Air Flow complete or its equivalent to ISI standard.
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .