RENOVATION OF CGOM BUILDING NO P 45 TEXTURE PAINT ON BUILDING NO P 3 AND P 5 AT CGRA AND CGDHQ7 AT PARADIP

Amount

SCH 'A' PART-I (B/R PORTION) Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation ,etc and getting out in soft/loose soil complete all as specified and directed.

Returning , filling in including spreading , levelling, watering and well ramming in layers not exe 25cm of soft/ loose soil complete all as specified and directed.

Removing of excavated material exc 500m but not exc 1500 m and depositing where directed complete all as specified and directed.

M&L surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil and disposal complete all as specified and directed.

Hand packing broken stone or boulders (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregte) as in foundations, filling and mass concrete complete all as specified and directed.

M&L 100mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L 40mm thick PCC type B-1, (1:2:4) using 40mm graded stone aggregate as in floor complete all as specified and directed.

Material and labour for brickwork with modular size flyash bricks , straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Material and labour 10 mm thick rendering in cement mortar (1:6) on other than fair faces of brick wall surfaces finished even and smooth without using extra cement complete all as specified and directed.

Dismantling of tiles of any descriptions in floors or dados etc. including cement mortar bedding ( but not backing).

Material and labour Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15mm thick rendering in cement mortar (1:6) complete all as specified and directed.

Material and labour Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15mm thick rendering in cement mortar (1:6) complete all as specified and directed.

Material and labour Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Material and labour glazed ceramic coloured tiles of size 300x450mmx7mm thick on vertical surfcaes such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar(1:4) complete all as specified and directed.

Material and labour Vitrified Ceramic tiles 8-10 mm thick dark shade (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick rendering in cement mortar (1:6) complete.

Material and labour Vitrified Ceramic tiles 8-10 mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Material and labour 20mm thick Granite (of any type) tiles machine cut, in skirting, dado, riser, cooking platform etc laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10mm thick rendering in cement mortar(1:4) complete.

Material and labour Chamfer, splays or arris in facework of Granite/ marble n. exc 15mm wide complete all as specified and directed.

Material & Labour for preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including one or more coat exterior wall putty to obtain smooth surface complete all as specified and directed.

M&L RCC (nominal mix) Type B1 1:2:4 (using 20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.etc fair finished complete all as specified

M&L RCC (nominal mix) Type B1 1:2:4 (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts etc, etc complete all as specified and directed.

Material and labour precast over slab Type B1 1:2:4 (using 20mm graded stone aggregate) set in cement mortor 1:4 complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

All as per item No 25 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Use and waste of form work to sides of concrete foundations , footing rafts, pile caps etc fair finished surfaces complete all as specified

Use and waste of form work to sides of pillers, posts, struts, piers,columns and stanchions,square, rectangular,with rough finished surface complete all as specified

Taking down wooden frame with shutter without taken off shutter from the frame,exceeding 1.5 sqm but not exceeding 4 sqm each including removing from site.

Taking down shutter of any description,exc 1.0 sqm but not exceeding 2.00 sqm each including removing from site.

Taking down wooden frame/ aluminium frame with shutter without taken off shutter from the frame, not exc 1.5 Sqm and refixing the same opening complete all as specified and directed.

Supply and fixing Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing of factory made solid panel PVC door shutter 30 mm thick(style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the styles &rails with suitable PVC sheet beading and joined together with solvent cement.fixed in the frame at site complete all as specified and directed.

Supply and fixing 35 mm thick Skeleton shutter, 2nd class hardwood,open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and itred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I complete all as specified and directed.

Supply and fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to complete all as specified and directed.

Supply and fixing butt hinges 125mm size medium weight, cold rolled mild steel, and fixed to wooden frames complete all as specified and directed.

Supply and fixing 100mm size aluminum handles, cast type anodised complete all as specified and directed.

Supply and fixing 150mm size aluminum handles, cast type anodised complete all as specified and directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 200mm long complete all as specified and directed.

Supply and fixing aluminum alloy, anodized, sliding door bolt of length 200mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed.

Supply and fixing aluminum alloy, anodized, sliding door bolt of length 300mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy.

Supply and fixing of MS double action spring hinge,125mm size with steel wire spring ,stove enamelled black fixed to metal door frame by welding complete all as specified and directed.

Supply and fixing 2nd class hardwood(Hollock) small fittings such as brackets of any type,latch and window stops & the like including all necessary labour,articles not exceeding 200 Cu cm each including 50mm long butt hinges,medium weight,cold rolled complete as directed.

Taking up or down GI water tubing with fittings including cleaning for re-fixing or removing from site of following size :-

32 mm bore

20 to 25 mm bore

Supply and fixing 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc of size:-

32 mm bore

25 mm bore

20 mm bore

Cutting chases in brick wall,girth not exceeding 10 cm for concealing water tubing and making good in cement mortar (1:3).

Supply and fixing PP-R Gate valves 32mm bore (brass insert) as per requirement of the site complete all as specified and directed.

Supply and fixing Stop valves 20mm bore, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing 15mm bore Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

Supply and fixing stainless steel Butt hinges 100mm size fixed to PVC framescomplete all as specified and directed.

Supply and fixing Aluminium power coated fancy type aluminium curtain rod 25mm dia incl PVC rungs @100mm C/C wutg globe type brackets matching to curtain rod complete all as specified and directed. MARVEL brand (legend series) manufactured by M/S Accumax interior products Pvt Ltd mumbai or equivalent as approved.

Supply and fixing brass chromium plated wall mixer and provision for overhead shower with 115mm Long Bend Pipe on upper side, connecting legs & wall flanges complete all as specified and directed.

Supply and fixing Rimless Single Piece WC with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern Fittings, Size: 385x720x715 mm, complete all as specified and directed.

Supply and fixing Hand shower health faucet with wall 8mm dia, 1.2 mtr long flexible tube & wall hook for EWC including hinges with complete fitting. Make : Jaquar, Hindware,cera,

Supply and fixing 15mm bore fancy type chromium plated, bib taps, cast copper alloy, with 2 Way bib taps with wall flange ,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make : Jaquar Alive 2 Way (VGP-81041) or equilavent in makes mentioned in list of makes.

Supply and fixing brass chromium plated shower rose of continental series, Make : Jaquar complete all as specified and directed.

Supply and fixing 32mm PVC waste pipe for wash hand basin., 900mm long complete all as specified and directed.

Supply and fixing under counter square type vitreous china wash hand basin of size 425x425x145 mm complete all as specified and directed. Make : Jaquar, Hindware, Cera.

Supply and fixing CP brass toilet paper roller with flap fixed with CP brass screws ccomplete all as specified and directed.

Supply and fixing 15mm bore Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses,with or without lettered'Hot' or 'Cold' ,screwed for 15mm iron pipe and fixed complete all as specified and directed. Make : Jaquar (COP-167BPM) or equilavent in make mentioned in List of Make.

Supply and fixing Brass square towel ring with and including CP brass screw complete all as specified and directed. Make: Jaquar,Hindware,cera.

Supply and fixing Towel Rack 600mm Long Without Lower Hangers but with 3 hooks, Stainless Steel complete all as specified and directed.

Supply and fixing Corner Glass Shelf with Bracket complete all as specified and directed. .Make: Jaquar (ACN-1173) or equilavent in make mentioned in List of Make.

Supply and fixing Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange complete all as specified and directed. .Make: Jaquar (ALD-769L) or equilavent in make mentioned in List of Make.

Supply and fixing vertical roller blind of any colour complete with all its accessories fixed to wall with screws all as specified & directed.

Supply and fixing of 40 mm thick first class hardwood (indian teak wood),panelled shutters with wooden door frame of (size 150mm x 100 mm) with teak wood pesting, tanjavoor pattern with carving/ design with lock rail with well seasoned wood, surface finished with polishing with polishing as specified in IS 1003-Part-1, including 150mm brass hindes-03 Nos, 200mm brass tower bolt-02 Nos, 300mm long brass sliding door bolt, brass door stoper and 150mm long brass handle-02 Nos complete all as specified as directed.

Supply and fixing 32mm dia CPVC Pipes & fittings on walls/ ceiling or laying in floors complete all as specified and directed.

Supply and fixing 75 mm PVC (SWR) floor trap plain with grating including jonting with solvent cement complete all as specified and directed.

Supply and fixing 75 mm CI Nahani trap with PTMT gratings(minimum weight 250 gm) including jointing to waste pipe fixed in cement concrete(1:2:4) type B1 complete all as specified and directed.

Material and labour MS flat iron small articles such as clamp, hold fast including bolts if required etc conforming to Fe.290. Gde-E-165 complete all as specified and directed.

Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) and fixed in position all as specified in SSR Part I complete all as specified and directed.

Supply and fixing Ball brass valves, 25mm size high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fixing 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and fixing 75 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

Supply and fixing 75 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Dismantling wrought iron and mild steel work of any descreption not other wise provided for complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting he same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Demolition and breaking up drain pipe salt glazed or AC or reinforced concrete and set in cement mortar 150mm dia complete all as specified and directed.

Material & Labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in concrete bed 150mm bore of pipe including packing under and haunching against the sides of pipes after they are laid and tested complete.

Material & Labour for 150mm dia (internal dia) salt glazed stone ware drain pipes grade "A" laid in trenches jointed and tested

Supply only Integral water proofing compound

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors over 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for preparation of old decorated surface by complete removal of existing treatment on wall surface and applying two coat of plastic emulsion paint over and including one coat of acrylic primer and two or more coat of white cement based wall care putty to obtain smooth finish complete all as specified and directed

M&L for preparation of old decorated surface by complete removal of existing treatment on wall surface and applying Texture paint over and including a coat of primer and two or more coat of white cement based wall care putty on wall surface to obtain smooth finish complete all as specified and directed.

M&L for Teak wood design on wall surface and fixing of 40 mm thick first class hardwood (indian teak wood) with architectural wooden design on front surface over water proof & termite proof BWP ply 18mm thick over 6mm thick PVC ply (Make: Century/ Kitply) as required including polishing over architectural design wooden surface complete all as specified as directed.

Providing and Fixing Armstrong Channelled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm(weight-8.5 kg/Sqm)made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.6. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.The panels shall be mounted on special aluminium splines (keel) using inside clips provided by Armstrong and approved by the Architect/ Engineer-in-Charge.

INSTALLATION : - An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install Aluminium Extrusion of size 3000(L) x 24(H) x 15.5(W) mm fixed with clip as approved by the Architect on the solid wall/partition to provide level and plumb surface for fixing Armstrong Keel. Install Keel vertically using screws and plugs at spacing of not more than 600mm centre-to-centre. The first and last keel should not be more than 150mm from the ends. Trim the tongue of the first bottom panel and install using headless nailwith groove side upward. Subsequent panels are installed with tongue side downward by engaging with each other using tongue and groove mechanism and secured by inside clip. Continue this process until required height is achieved. Shorter butt edges need to be joined using industrial/wood glue. The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/ Engineer-in-Charge. Finish off the edges using wooden moulding of matching colour (by others). Installation should be carried out as per Armstrong recommended procedure.

SCH 'A' PART-II (E/M PORTION) Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in Existing Conduit/including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases and making good disturbed surface complete, including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified & directed.

(a) One light point controlled by one way switch.

(b) One 3 pin socket outlet, 5/6 amps, on independent board.

All as per item No 98 here-in-before but with copper conductor 2.5 sqmm for One 3 pin socket outlet, 15 amps on independent board all as specified and directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and as directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and as directed.

Supply and fix ceiling rose, surface bakelite,65 x 50mm, three terminals all as specified and directed.

S&F Modular White Cover Plate with Frame, 3 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 4 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 6 Module complete all as specified and as directed.

S&F Modular Metal Flush Box 3 module complete all as specified and as directed.

S&F Modular Metal Flush Box 4 module complete all as specified and as directed.

S&F Modular Metal Flush Box 6 module complete all as specified and as directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store

Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

Supply and fixing of Modular Fan regulator,120 watts (Make : .Crabtree/Cona/Havells)

Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 6 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 6 sqmm size as earth wire drawn in same conduit complete all as specified and directed .

Supply & fix Green LED High performance 6 Watt LED Downlights for commercial applications, 100 lumen/watt efficacy, Efficient heat sink (die cast) with steel clips integrated driver control (for easy installation) complete all as specified and directed Make: Philips cat part No DN191B LED6S - 3000 PSU WH S2 equivalent in Wipro/ Crompton/Havells

Supply & fix 32 W LED Cirrus Surface mounted general purpose square shaped luminaire with low height CRCA housing and high transmissivity diffuser suitable for office application, LED down lighter, complete all as specified and directed. Make : Philips cat part No SM366C LED 32 - 6500 PSU OD WH eqv wipro/crompton /Havells

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Supply & fix LED tube light Fitting SmartBright extruded aluminium batten available in 4 ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting with accessories complete all as specified and directed. Make Philips Cat Part No BN021C LED22S PSU CW GR (4 ft) Eqv Crompton/ Havells

Supply and fix heavy duty exhaust fan of 300 MM sweep,Turbo Force SP (Heavy duty ) single phase 230/240 Volts,, AC supply, 1400 RPM complete and making holes with louvered shutters including mounting frame and connecting the fan to celing rose including provision of three core flexible copper conductor cable of size 1.5 Sqmm copper including to inside out surface & white wash etc with not less than 0.5m long to connection complete all as specified and directed. Make-Havells/Usha/Khaitan/Orient

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete

Supply and fix heavy duty exhaust fan of 600 MM sweep,Turbo Force SP (Heavy duty ) single phase 230/240 Volts,, AC supply, 1400 RPM complete and making holes with louvered shutters including mounting frame and connecting the fan to celing rose including provision of three core flexible copper conductor cable of size 2.5 Sqmm copper including to inside out surface & white wash etc with not less than 0.5m long to connection complete all as specified and directed. Make-Havells/Usha/Khaitan/Orient

S&F flush mounting factory made Ekinoxe SPN DBs Double door IP-43 protection, IK-09 with Metal door with neutral bar,Earth Bar and cables ties for cable menagement fully insulated bus bar 8 way, all as specified and directed. Make -Legrand Cat No 507611 or equivalent in Make of Siemens/Schneider.

Supply and fix MCB single pole and neutral, 240 volts, 40 amps breaking capacity 10KA, ‘C’ Series. etc , complete all as specified and directed. Make : Legrand /Siemens/Schneider

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series all as specified and directed. Make : Legrand or eqvt in Siemens/Scheinder

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 15 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing wire & GI pipe 15mm up to 7.5 m shall be included in cost of above item.

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage copper bound induction motor complete all as specified and directed.

Taking down old unserviseable tube light Fittings Complete all as specified and directed

Taking down old unserviseable 8 Way SPN DB Complete all as specified and directed

Taking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, socket or power) complete, (fittings such as switches, ceiling roses,call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified & directed .

Taking down unserviceable sub main /Sub circuit wiring of any type and size including Steel conduit, batten wiring for necessary repair/replacement.

S & F 4 mm dia GI wire to connected building earthing to MCB DB Box complete all as specified and directed

Supply & Fixing , in replacement, PVC copper cable 3-in 1 core of size 1.5 sq mm for junction box to street light fitting connection. (Make: Finolex/ Polycab/ Plaza)

Taking down old unserviseable MCBs Complete all as specified and directed

S&F tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors 15mm dia complete all as specified and directed.

S&F 15mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm dia brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply, installation, commissioning and testing of Modular Type 25 Litres capacity water heating system, storage type (GEYSER) ISI maked, electrical single phase, 230 volts, 50 Hz, BEE 5 star energy saving rated having stainless steel tank, metallic body and including making electric connection and grouting of bolts Pipe connections etc. as required at site complete all as specified and directed. Make: Havells Cat Part No GHWCBNTWH025/Usha/ Racold

Supply and install hi wall split units indoor/outdoor Copper winded complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 TR complete all as specified and directed.

Supply and Install Voltage stabilizer copper winded for automatic operation, single phase naturally air cooled indoor type Wall mounted type & designed for input variation between 90 V to 230 Volt with out put voltage stablized at 230V with accuracy of +- 2.5% and capacity of 5 KVA Complete all as specified and directed. Make:V Guard, Microtac & Blue Line

Supply & fix copper tubing pair of two pipe for suction & discharge size of suction pipe 1/2'' & disvcharge pipe 1/4 " diameter 0.8 mm thick complete with separate nitrile vinyl insulation 9 mm thick etc, all as specified and directed including chase cutting wall & making good of existing surface as required on site complete all as specified and directed.

Supply & fix wall / floor mounting type powder coated stand for out door unit as per manufacturer's recommendation complete all as specified and directed.

M&L for unplasticised PVC pipes of pressure rating fixed complete to walls, ceilings or in floors etc, size 25 mm dia od pipe including chase cutting on wall & making good as per existing complete all as specified and directed.

Supply and fix MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one MCB single pole 20 amps, 240 volts Modular Type Complete all as specified and directed Make Havells/Cona/Anchor.

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 4 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 4 sqmm size as earth wire drawn in same conduit complete all as specified and directed .

Taking Down Voltage Stabilizer and refixing the same position after complete the Civil work complete all as specified and directed

Talking down Split Air conditioning 1.5 TR indoor Unit and after compete the civil work refixing the same air conditioning on same place including connected acessories complete all as specified and directed .

vaishnaveedevienterprises

M/S ABHISHEK JENA