Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-Finance | L1 | Accepted-Finance Rate quoted is lowest | |
| 2 | L2₹4.3 L+₹65,710 (18.2%)Accepted-Finance | L2 | Accepted-Finance Rate quoted is second lowest | |
| 3 | L3₹4.3 L+₹69,755 (19.3%)Accepted-Finance | L3 | Accepted-Finance Rate quoted is third lowest | |
| 4 | L4₹4.3 L+₹73,800 (20.4%)Accepted-Finance | L4 | Accepted-Finance Rate quoted is highest |
Tender Value
₹4.3 L
EMD Value
₹5,000
Closing Date
29 May 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer
SE ETC Sultanpur 400KV S/S Campus Payagipur Sultanpur
CONSTRUCTION OF 33KV KAUHAR (UPSIDC) BAY INCLUDING EXTENSION OF SWITCHYARD AND LIGHTING OF EXTENDED SWITCHYARD ALONGWITH OTHER ASSOCIATED WORKS AT 132KV S/s GAURIGANJ UNDER ETD SULTANPUR
2023_UPTCL_800177_1
S.T. T.No. 09/ETCS/2023-24
Open Tender
Electrical Works
Item Wise
60 days
Sultanpur
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
SE ETC Sultanpur
₹5,000
31 May 2023
3 May 2023
30 May 2023
3 May 2023
29 May 2023
3 May 2023
Amount
Construction of 33KV Kauhar (UPSIDC) Bay including Extension of Switchyard and Lighting of Extended Switchyard alongwith other associated works at 132KV S/S Gauriganj, Amethi with all Cost of Men; Materials; Misc. Consumables, T&Ps etc. Required for Satisfactory Completion of the Work as per Technical Specifications and Direcüon of the Supervising Engineer as per Site Re uirement and Details below :
Supply of Material
Supply of 5 No. U-Bolted type Single. Tension Fitting Assembly with Tum Buckle, suitable for Twin ACSR Moose Conductors and 33KV Bus Bar Disc Insulator String comprising of 4 No. 70 KN Disc lnsulators, complete with Hardware Fittings, D-Shackle, Socket Eye, Ball Hook, Yoke Plate, D-Clip, Tension Clamp etc, as per Technical Sqecification & Sample.
Supply of 5 No. U-Bolted type Single Tension Fitting Assembly with Tum Buckle, suitable for Single ACSR Panther Conductors and 33KV Bus Bar Disc Insulator String comprising of 4 No. 70 KN Disc lnsulators, complete with Hardware Fittings, D-Shackle, Socket Eye, Ball Hook, Yoke Plate, D-Clip, Tension Clamp etc, as per Technical Sqecification & Sample.
Supply of Spacers, suitable for 33KV Bus bar of Twin ACSR Moose Conductors with 250mm Spacing and duly made of LM-6 Aliminium Alloy, complete with 12mm dia HDG Bolts, Nuts, Spring & Plain washer as per Technical Sqecification & Sample.
Supply of Spacers, suitable for 33KV Jumpers of Twin ACSR Panther Conductors with 250mm Spacing and duly made of LM-6 Aliminium Alloy, complete with 12mm dia HDG Bolts, Nuts, Spring & Plain washer as per Technical Sqecification & Sample.
Supply of PG Clamp duly made of LM-6 Aluminium Alloy, suitable for ACSR Moose to Moose Conductors complete with 4No. 16x90mm size GI Bolts, Nuts, Spring & Plain washers as per Technical Sqecification & Sample.
Supply of PG Clamp duly made of LM-6 Aluminium Alloy, suitable for ACSR Moose to Panther Conductors complete with 4No. 16x90mm size GI Bolts, Nuts, Spring & Plain washers as per Technical Sqecification & Sample.
Supply of PG Clamp duly made of LM-6 Aluminium Alloy, suitable for ACSR Panther to Panther Conductors complete with 3No. 16x75mm size GI Bolts, Nuts, Spring & Plain washers as per Technical Sqecification & Sample.
Supply of 33KV C.T. Bi-Metallic Terminal Connectors duly made of LM-6 Aluminium Alloy alongwith Bi-Metallic Sleeve Plate suitable for Twin ACSR Panther Conductor with 4No, 12mm size GI Bolts, Nuts, Spring & Plain washers as per Technical Sqecification & Sample.
Supply of 33KV Isolator Bi-Metallic Terminal Connectors duly made of LM-6 Aluminium Alloy alongwith Bi-Metallic Sleeve Plate suitable for Twin ACSR Panther Conductor with 4No, 12mm size GI Bolts, Nuts, Spring & Plain washers as per Technical Sqecification & Sample.
Supply of 33KV P.T. Bi-Metallic Terminal Connectors duly made of LM-6 Aluminium Alloy alongwith Bi-Metallic Sleeve Plate suitable for Twin ACSR Panther Conductor with 4No, 12mm size GI Bolts, Nuts, Spring & Plain washers as per Technical Sqecification & Sample.
Carriage of Materials
Sorting, Weighting and Loading of Galvanized Sub Station Structures on private Truck at EFU Naini, Allahabad.
Safe Transportation of Galvanized Sub Station Structures by Private Truck Arranged by the Contractor from EFU Naini, Allahabad to 132 KV S/S Gauriganj, Amethi (130 Km. approx.) including Toll charges.
Unloading, Sorting & Proper Stacking of Galvanized Sub Station Structures from Private Truck at store yard of 132 KV S/S Gauriganj, Amethi.
Carriage of Misc. Items like CTs, PTs, CB, Isolators, Control Cables, Conductors, M.S. Round Bar, M.S. Earthing Strips etc. from Designated Primary Sub Station within 80 Km Distance to 132KV Sub Station Gauriganj, Amethi including its Loading and Un-Loading.
Laying of Earth Mat- Laying of Earth Mat in the Extended Switchyard of the S/S along with Connecting the Newly Laid Earth mat with existing Earth Mat as per Details below :
Fabrication of 3mtr. Long Electrode with 40mm dia. MS Round Bar having 150mm Long Conical Shape by due Cutting, Straightening etc., and then Piercing it vertically inside the Ground with top 700mm below the Ground Level including Shifting MS Round Bar from Storage Place at the Sub Station to Switchyard.
Laying of 32mm Dia MS Round Bar, 700mm below the Ground Level by Due Cutting Straightening, Welding, Painting, Excavation of Trench, by filling of Trench after Laying of Earth Mat including shifting of MS Round Bar from Storage Place at the Sub Station to Switchyard.
Making of l50mm Long Lap Joint of above Laid 40mm dia Round Bar by due Cutting Straightening, Welding etc.
Making of l50mm Long Lap Joint of above Laid 40inm dia Round Bar to Connect with Existing Earth Mat of the Sub Station by due Cutting Straightening, Welding etc.
Making of Cross Joint of above Laid 40mm dia MS Round Bar, 700mm below the Ground Level by Due Welding, of all Four Comers including providing and Welding of Suitable size 2 No. MS Angle Pieces on Opposite Corners of the Cross Joint.
Making of End Joint of the above Laid 40mm dia MS Round Bar, with top of the already Vertieally Pierced MS Electrodes 700mm below the Grouiid Level by duè Welding.
Erection Work
Erection of Main & Aux. Structures including their Shifting from Storage Place at the Sub Station to Erection Site.
Laying & Stringing of 33KV 3Phase Main Bus Bar & Jack Bus Bar including Hoisting Insulator Strings, Tension Fittings ete. alongwith Shifling of the Conductors / Materials from Storage Place at the Sub Station to Erection Site as per Details below :
Stringing of 33KV 3Phase Main Bus Bar of Twin ACSR Moose Conductor. (1 Job for each Phase of Bus Bar per Section)
Stringing of 33KV 3Phase Jack Bus Bar of Single ACSR Panther Conductor. (1 Job for each Phase of Bus Bar per Section)
Erection of Following Equipments in 33KV Kauhar (UPSIDC) Bay including their Shifting from Storage Place at the Sub Station to Erection Site.
33KV Bus Isolator with associated PIs
33KV Line Isolator with associated Earth Blades & PIs
33KV C.T. Junction Box
33KV P.T. Junction Box
33KV Feeder Control & Relay Panel
Energy Meter Cubical
lnterconnection & Jumpering of Equipments of 33KV Kauhar (UPSIDC) Bay with the help of ACSR Panther Conductor to Connect the Bus Bar Conductor of Main Bus, Jack Bus with Equipments and Equipments to Equipments and Interconnection & jumpering or three 33KV other bays with the help of ACSR Panther Conductor to Connect the Jack Bus with Equipments and Equipments to Equipments with the help of suitable Clamps / Connectors including, Cutting, Bending, Shaping etc. of the Conductor as per Site Requirement.
Laying of Following sizes Control Cables in Cable Trenches from Control & Relay Panels in Control Room to various Equipments, Junctions Boxes etc. in Switchyard as per Cable Schedule including Shifting of Cables in Drums from Storage Place at the Sub Station to Erection Site and Shifting Back the Balance Cables to Stores at the Sub Station.
2C x 2.5 Sq.mm
4C x 2.5 Sq.mm
6C x 2.5 Sq.mm
Termination of various sizes above Laid Control Cables Extending D.C. Supply from DCDB and A.C. Supply from ACDB to Control Panels & Equipments including Drilling of Holes, Providing and Fixing.of Cable Glands, Ferrules & Crimping Lugs.
Earthing by Cutting, Straightening & Laying 500 mm below Inside Ground & above Ground of following sizes M.S. Flats for Diagonal / Double Earthing of the Main & Aux. Structures, Equipments and Cable Trenches including Welding with Main Earth Mat and with the Object to be Earthed including Excavation of Trenches & its Back Filling etc. as per Details below :
Earthing of Main & Aux. Structures and Equipments (CB, Isolators, CTs, PTs, C&R Panel, Junction Boxes etc. with 50 x 6 mm size M.S. Flat.
Earthing of Cable Trench with 25 mm x 6 mm / 25 x 5 mm size M.S. Flat
Paintin8 of M.S. Earthing Strips by Rubbing with Sand Paper & Wire Brush, then Painting with 1 Coat of Red Oxide Primer & 2 Coats (The 2nd Coat of Paint shall be Applied at the Gap of 48 hrs. when 1st Coat of Paint is done &.Checked by concerned S.D.O.. / J.E.) of .1st Quality Synthetic Enamel Paint of Asian / Berger / Nerolac make in Bus Green / Black Colour as per Details below :
50 x 6 mm size M.S. Earthing Strip in Bus Green Colour.
25 x 6 mm / 25 x 5 mm size M.S. Earthing Strip in Black Colour.
Switchyard Lighting
Providing of Junction Box of.size 280 x 225 x 150 mm duly made of 16 SWG Sheet and Painted with Smoke Grey Colour Synthetic Enamel Paint and Fitted with 1 No. 6 Amp. SP MCB on Anodized M.S. Channel, 1 No. Bakelite Fuse Fitting with 6 Amp. NS 6 type HRC Fuse, 1 No. Copper Neutral Link, Bakelite Terminal Block of 4 Terminals, Cable Glands suitable for 2C / 4C x 2.5 Sq.mm size Incoming / Outgoing Control Cables etc., then Installation of Junction Box on G.I. Column Structures at designated Height with the help of suitable M.S. Clamps alongwith Earthing of the Junction Box with 12 SWG G.I. Wire including Cable Termination with Satisfactory Testing & Commissioning.
Providing & Fixing of G.I. Pole Bracket duly made of 40 mm dia. 1.2 Meter Long 'B' Class Pipe and Bent at one end by Quarter Circle in 1.0 Meter at an Angle of 30 degree for Fixing of 125 Watt LED Street Light Luminaries Fitting on G.I. Column Structure with the help of M.S.Clamps.
Providing & Fixing of 125 Watt L.E.D. Street Light Luminaries Fitting of Philips / Crompton Greaves / Havells make in Single Piece Die Cast Aluminium Alloy Housing with Pot Optics Reflector & Toughened Clear Glass Cover with Frame for Lamp Compartment inlcuding Cable Terminations.
Laying of 2C x 2.5 Sq.mm. size Control Cables form Junction Box to LED Street Light Luminaries Fittings through Inside the M.S. Pole / GI Stricture including necessary Fixing of Cable on GI Structure.
HARE KRISHNA ENERGY PROJECTS
ELECTRO INDIA
DEEPAK ENGINEERING
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .