8331 REPAIRS AND MAINT OF DRAIN FENCING BOUNDARY WALL HARDSTANDING PATH ETC IN PCDA AND OTHER UNITS UNDER AGE BR II UNDER GE KUNJALI

Amount

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

Dismantling fencing wire mess, any type complete all as specifed and directed.

Demolition of cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L Cement Concrete( 1:4:8), type D2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M& L for walling of random rubble, uncoursed, well bounded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncoursed or brought up to cousre hammer dressing with maximum depression on face from straigth edge held against the dress surface not exc 40 mm on granite stone complete all as specified and directed.

M&L for Raised pointing to random rubble masonry uncoursed or brought upto course in CM 1.4 complete all as specified and directed.

Dismantling posts or struts(wood, steel or RCC) of any section including taking out embedded portion and making good disturbed ground complete all as specified and directed.

S&F MS angle post & struts as arms over compound wall in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F galavanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain-ing bolts, including,securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as specifed (each line wire to be measured) complete all as specified and directed.

S&F Galvanized concertina coil of 610mm dia made of 0.5mm thick, 19mm wide strip & 2.59mm dia high tensile wire, 125 Nos of clips, having 50 Nos of circles and covering 6 running mtr and 'S' clips per spiral using a central core of high tensile wire around which a tape of razor sharp barbs is machine crimped etc complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for Rendering 15 mm thick in CM (1:6) on fair faces of brick/concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 20mm thick on other then fair face of brick work or concrete in (15+5) mm thick in two coát in CM (1:4) with finishing coat mixed with water proofing powder at rate of 2% of cement or as per manufacturers instructions. Note:- (i) Water proofing compound shall be measure separately under respective item.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for Preparation of new plaster surfaces in walls soffits, facia roof and applying 2 coats of weather proof acrylic based paint 100% arylic over a coat of primer complete all as specified and directed.

M&L for Preparation of old plaster surface of wall & applying 2 coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for Preparation of old decorated surfaces washing, stopping nail holes, rubbing down and applying two coats of acrylic emulsion exterior paint (100% acrylic) complete all as specified and directed.

M&L for 100mm thick cement concrete 1:2:4, type B-2, (using 40 mm graded stone aggregate) as in floor, finished even and fair without using extra cement (for disturbed portion of Hard standing) complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded aggregate as in sub base of floor complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour over including 20mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness M-40 grade with grey cement and pigment laid dry over and including 25mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

M&L for Preparation of new steel sufaces of any description ,over 10 cm width or girth and applying 2 coat of synthetic enamel paint over a coat of red oxide/zink primer complete all as specified and directed.

M&L for Preparation of old painted steel surface of any description over 10 cm width/girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Precast PCC 1:2:4 type B-1(using 20 mm gradded stone aggregate) in landings, cover slabs( for manholes etc.) water troughs, mangers, shelves & similar articles with plain faces set in CM 1:4 complete all as specified and directed.

Mild steel TMT Bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia. or securing with clips complete all as specified and directed.

M&L for running welding in repairs of mild steel gates, grills, manhole covers etc, thickness of metal to be welded exc 9 mm but n exc 20 mm complete all as specified and directed.

Removing excavated soil & PCC debris as obtained from demolition to the outside of M D land.

M&L for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down including applying a layer of chalk whiting (putty) for making the surface even & smooth and applying two coats of oil bound distemper over a coat of Alkali resistant primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified and directed.

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and directed.

S & F in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repairs CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair chromoium plated toilet paper roll holder with flap complete all as specified and directed.

S&F in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, complete all as specified and directed.

S & F in repairs stop valve fancy type chromium plated screwed down, high presure with butterfly handle screwed both ends for pipe and fixed to pipe of 15mm dia bore complete all as specified and directed.

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet PVC waste pipe 90cm long etc. complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F 10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets etc.complete all as specified and directed.

S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern complete all as specified and directed.

S&F in repairs Soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges complete all as specified and directed.

S&F of Nylon venetian blinds of approved make 1mm thk, width exc 100mm designed with necessary fittings of aluminium sections complete all as specified and as directed.

S&F in repair for Amstrong ceiling made out of 600x600x15 mm thick classic lite(RH-95) mineral fibre acoustics ceiling board/tiles with and including powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 6 mm dia G.I. wire for suspending , bolts, necessary washer, nut/ clits/ pin hook etc for securing frame work to ceiling to the snap gridcomplete all as per manufacturer's instruction. (Make : Amstrong or equivalent as approved by GE)

M&L for preparation of new or old wooden sureface of any description and girth and treaqting with two coats of cerosote oil complete all as specified and directed.

M&L plugging to brick walls complete for wood fillets, rounds, mouldings, boarding etc at distance n.exc 1m complete all as specified and directed.

S&F in repair 12mm thick ply wood, grade BWR, typeBB fixed with screw to timber frame work complete all as specified and directed.

S&F in repair 4mm thick vennered decorative plywood, grade 1(with BWR resin),with decorative face veneers on only one face fixed with nails on 12mm thick plywood complete all as specified and directed.

M&L french polishing on surfaces of any description, width or girth including cleaning clearing and preparting the surface complete all as specified and directed.

M&L for anodised powder coated aluminium window/ventilator/door shutters, sliding, side hung, fixed type without sash bar, aluminium section including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading , screws etc. complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness as on paltform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring 20 to 25mm thick riser of steps, skirting, dado and pillar laid over including 15 mm thcik rendering in CM 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring 20 to25 mm thick in floor risee of steps, skirting, dado,and pillarsincluding screed bed 15mm thick or bedding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and jointed with greay cement slurry mixed pigment to match shade of slab incl rubbing and polishing complete all as specified and directed.

M&L Machine Cut cudappa stone slab 20-25 mm thick over cement screed baise laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20 mm thick granite maching cut as in steps, window cills, cooking platform, working table etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (Colour of granite will be decided by the GE).

M&L for Repair to steel rolling shutters, with repair/replaced of ball bearing, taking down top cover, anchoring rod, greasing etc; erected in position as indicated, push pull or manual type complete all as specified and directed. Note:- Cost of ball bearing and greas etc. deemed to be included in this item.

M&L for Repair to steel rolling shutters, with repair/replaced of ball bearing, taking down top cover, anchoring rod, greasing etc; erected in position as indicated gear operated type with bevel gear box and crank handle complete all as specified and directed. Note:- Cost of ball bearing and greas etc. deemed to be included in this item.

M&L Applying 4 mm thick finished texture mortar in CM 1:2 (mix one part of white cement and two parts of dhoplur clear quartz powder of 1 to 2 mm grading) including texture finish shall be achieved with the help of hand driven machine including preparation of old painted surface and newly plastered surfaces and making plain surface of stone masonary pattern and over that applying two coats of 100 % acrylic exterior paint (Asian or Equivalent) over a coat of exterior grade wall primer, with and including irrection and dismantling of scaffolding to carrying out works upto thirteen stories building, complete all as per manufactures instructions and as directed. Make: Asian /Berger/Nerolac.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swanneck, etc. including cleaning or refixing complete all as specified and directed. (measured over all as fixed along the centre line over fittings and accessories)

S&F 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches complete all as specified and directed.

S&F 75mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 110mm dia bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm dia bore PVC (SWR) bends any radius complete all as specified and directed.

Dismentling 75/100mm dia CI pipe jointed in cement mortar and taking out of trenches as required complete all as specified and directed.

S&F 100 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 75 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F CI Bends 75 mm bore ( any radius), diminishing pieces or tapers ( larger bore measured complete all as specified and directed.

M&L Cast iron nahani trap with grating including jointing to waste pipe run lead 100 mm complete all as specified and directed.

M&L Cast iron nahani trap with grating including jointing to waste pipe run lead75 mm complete all as specified and directed.

M&L for Branch pieces, 100 mm bore single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

M&L for Branch pieces, 75 mm bore single ( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L for 2nd class hard wood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area exc. 13sqcm & n. exc. 25sqcm complete all as specified and directed.

S&F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm/100mm dia bore of pipe complete all as specified and directed.

Dismantling structural steel work wrought iron or mild steel work including door, gates, of any description not otherwise provided for complete all as specified and directed.

S&F of Rolled sections of Fe-410-W (Gde-E-250) quality-B as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including bending, welding etcincl one shop coat of zinc chromate primer incl preparation of surfaces complete all as specified and directed.

S&F in repair pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.

S&F in repair pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws all as specified and directed.

Genius Construction Co.

SHREE JAGDISH FURNITURE CO.

perfect electricales