Execution of works related of Fire rated glazed partition, ramp covering with polycarbonate sheet, access control system, SITC of CCTV camera including integration with existing system at WHO-SEARO building, IP Estate, New DelhiI

reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived

from natural sources).

5.9 Centering and shuttering including strutting, propping etc. and removal of form for

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 5.00 736.4 3682.00

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of

1.6 mm thick GI sheet ( Zinc coating not less than 120gm/sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be

filled with mineral wool Insulation having density minimum 96Kg/sqm .The frame will have a provision of G.I. anchor fastners 14 nos ( 5 each on vertical

4 9.161 style & 4 onhorizontal style of size M10 x 80 ) suitable for fixing in the opening along with factory made template for SS ball bearing hinges of Size RMT 6.30 2202.9 13878.27

100x89x3mm for fixing of fire rated glazed shutter

. The frame shall be finished with a approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of

Engineer - in- Charge . (Cost of SS ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes Fire rating conforming to IS:3614 (Part II) or EN1634-1:1999, tested

and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail

60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/sqm) duly filled

mineral wool insulation having density minimum 96 kg/cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of

approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction

of Engineer-in-Charge (panelling to be paid for seperately).

Providing and fixing non load bearing fixed frame for fire resistant glazed partition for 120 minutes fire rating, made out to a profile of dimension

60mm x 70 mm of 1.6 mm thick galvanised steel sheet as per test evidence suitable for fixing fire rated glass for 120 minutes

of both integrity & radiation control (EW120) & minimum 20 minutes of insulation (EI20).The profile has to be fixed to the supporting construction by

6 9.163 means of anchor fasteners of size M10 x 80, every 150 mm from the edges and every 500 mm (approx) c/c. Linear measurement of frame shall be RMT 177.00 2202.9 389913.30

measured for payment. The frame shall be filled with mineral wool insulation of density minimum 96kg/ cum and finished with a approved fire

resistant primer or powder coating of not less than 30 micron in desired shade as per NBC 2016, IS 16231 (Part 3):2016 and directions of Engineer - in-

Digitally signed by

DINESHWAR SINGH PHILEM

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc

coating not less than 120 gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c ,

including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20

mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-inCharge with glass of required thickness

having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have

to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved

NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredited labs as per ISO/IEC 17025 for

testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50

8 metres lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar Cum 15 2060.2 30903.00

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials

by mechanical means, including loading, transporting, unloading to approved municipal

dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads

including all lifts involved.

Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650

kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved

block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall

be made for seperately).

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters,

window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement :

4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of

11 edges to give high gloss finish etc. complete at all levels. Sqm 10 4170.7 41707.00

8.2.3 Granite stone slab of all colour and texture except black, Cherry/Ruby red

8.2.3.1 Area of slab upto 0.50 sqm

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel

frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately).

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying

a priming coat of approved steel primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

10.16.1 Hot finished welded type tubes

13.1 12 mm cement plaster of mix :

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to

prepare the surface even and smooth complete

Digitally signed by

DINESHWAR SINGH PHILEM

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of

approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Providing and fixing multi walled transparent /opaque l0 mm thick polycarbonate sheet ol'required colour blue, brown or green etc. UV co-extruded

and having UV coating on one side multi walled sheet ol weight not less than 1.60 to 2.05kg/sqm as approved by Engineer-in-charge. The light

transmission lrom transparent or translucent or opaque polycarbonate sheet varies from 30 to 807o and shall be decided by engineer in charge as per

requirement. 'fhe panel shall satisfu the Dart drop impact lest for value above I 5 and upkl 60 Joules and confirm either flame retardancy of class

UL94HB/94V-0categoryaspcrlSl4434:2023orcategoryV0&llBasperAS'I-MD635-ISor BSlD0classificarionasper ENl350l lor firc safcty.-l'he ycllowncss index

teslcd as pcr ASTM Ir3 l3 (D1925) shall be less than or equal to 2 or it shatl be I units as per AS'I'M D 2244 at thc time ol installation and shall bc less

than or equal to l0 as per ASl'lvl E3 l3 (D 1925) or 6 units as per AS'I'M D 2244 on a sample alicr 5000 Ilours ol'exposurc of'LJV / sun light.'l'he rnulti

rvalled poly carbonate sheet shall bc llxcd on tubular steel structurc with aluminium Alcox section ol'size 60x l8x2 mm (anodized 25 micron thick) and

weight not lcss than 0.462 kg/metrc. Weather proof'Neoprenc/ t.,l,DM rubbcr gasket shall be fixed on both side of joints to make the whole structure

18 water tight as per approved design/drawings. The aluminium section shall be fixed on Joints at both sides (top & bottom) of polycarbonate sheet to Sqm 250.00 978.0 244500.00

hold the sheets rigidly together. The weather proof neoprene gasket and aluminium profile shall be fixed and sealed with silicon sealant to make the

Joints fully water proof. The open overhead ends of polycarbonate sheet to be sealed with anodised aluminium U Profile/ channel of size tOxl0x 1.5

mm thick of weight not less than 0.2kglm. The polycarbonate sheet and aluminium profile shall be fixed to MS Framed Shucture with setf+aping and

self-drilling 55mm long steel screws to be fixed @ 300mm centre to centre. The rate shall be inclusive of cost of all material involved such as

polycarbonate sheet, aluminium profile and aluminium channel, EPDM gasket, Self+aping screws, nut bolts, Silicon sealant or any other material

required for fixing the sheet but excluding the cost of steel structure which shall be paid separately including hoisting thc sheets and fixing in position in

required scaflotding shape. The rate shall also include the cost ofall l'& P scaffolding and safery precautions required during execution of the work. The

entire work shall be executed as per required design/drawings and direction of Engineer in-charge, all complete

12.68.1 10 mm thick and U- value nol more than 2.50 W/m2K

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming

coat, preparation of surface, etc. complete.

13.52.1 On steel work

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and

conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on

20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with

matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z

sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be

smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,

C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash

fasteners to be paid for separately) :

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)

Digitally signed by

DINESHWAR SINGH PHILEM

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on

the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required

and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide

plate etc. complete as per the direction of Engineer-in-charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top &

23 21.18 bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all Sqm 12.00 5325.9 63910.80

complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20 mm

made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre,

suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs

20 12.54 of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm

and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help

of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be

galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :

GI Metal Ceiling Clip in plain Beveled edge global white colour tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having

21 12.54.2 galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester Sqm 10.00 2354.65 23546.50

powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing

21.8 weather silicon sealant over backer rod of approved quality as per architectural drawings and

22 direction of Engineer-in-charge complete. Metre 8000.00 96.75 774000.00

21.8.1 Upto 5mm depth and 5 mm width

As per CPWD circular dated 08.08.2024 for GST effect @0 .973 of above fo DSr-2023 except item no 12.68 5437205.21

Add Cost Index @1.03 on DSR items-2023 for base rate as on 01.04.2025 except item no 12.68 5592986.37

Add Cost Index @1.01 on above for base rate as on 01.04.2026 5648916.23

(B) CIVIL NDSR ITEMS

1 MR-1 Supply & fixing Heavy Duty Overhead Door Closer of approved make with Std.arm EN 2-6,FinishSilver, 1 no per leaf Each 1 10728.15 10728.15

2 MR-2 Supply & fixing of Narrow stile Motise Shsh Lock and 80 mm bsk cylinder with lever handle of appproved make, 1 no. per door Each 1 14119.61 14119.61

Digitally signed by

DINESHWAR SINGH PHILEM

3 MR-3 Supply & fixing of engineered wood flooring of 15 mm thickness in floors and ramps Sqm 10 9027.89 90278.90

4 MR-4 Providing and fixing of M16, 8.8 grade anchor fastners threaded rods with chemical HY-200 or equivalent chemical incluidng all nut and washers etc. RMT 50 5055.62 252781.00

Providing and fixing 12 mm thick toughened clear glass of approved brand and manufacture in aluminium frames(aluminium frame shall be paid

seprately), with siliconing including fixing arrangement and making necessary holes etc. all complete as per direction of Engineer-in-charge

Providing and fixing 12 mm thick toughened clear glass partitions upto 3.0 & 3.7 meter height of approved brand and manufacturer with top and

6 MR-6 bottom aluminium U channel to be fixed in floor and ceiling, along with necessary support above false ceiling including fixing arrangement and filling Sqm 5 6620.45 33102.25

of joints with silicon of approved shade all complete as per direction of Engineer-in-charge

Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.

Size- 450 mm long, 370 mm C/C, (H) shape

Providing and fixing stainless steel Lock of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.

SITC of Fire Retardant Velvet Fabric for Rear Curtain minimum 350 GSM , having rich pile finish. Fabric shall be provided with 200% gathering) to ensure

proper drape, opacity. Fabric shall comply with Class 1 flame retardancy. Fabric shall be stitched in required panel widths with double-folded hems,

reinforced with highstrength stitching, and provided with rust-proof metal eyelets at uniform spacing not exceeding 200 mm c/c, suitable for heavy-

9 MR-9 duty curtain suspension systems. The fabric shall have uniform pile direction, and shade matching across panels, ensuring seamless visual appearance. Nos 1 331347.46 331347.46

shall be compatible with motorized track system. Rate shall include fabric supply, stitching, eyelets, reinforcement, transportation, installation on track

system, alignment, and finishing, complete in all respects as per direction of Engineer-in-Charge. Approved Shade : Exisiting Main Curtain Velvet

SITC of Fire Retardant Velvet Fabric for Stage Wings, of minimum 350 GSM , having uniform weave, matte finish, and high light absorption

characteristics, suitable for stage masking applications. Fabric shall be used with 0% gathering and shall be stretched and fixed over wing frames with

proper tension, ensuring completely wrinkle-free, and seamless finish on all sides. Fabric shall comply with Class 1 flame retardancy and shall have light

fastness. Fabric shall be stitched and wrapped all around the panel edges. Fabric shall have consistent shade and texture. Rate shall include fabric

supply, stitching, wrapping, fixing, reinforcement, transportation, installation, and finishing, complete in all respects as per direction of Engineer-in-

Charge. Approved Shade : Exisiting Main Curtain Velvet Shade.

SITC of Fire Retardant Velvet Fabric for Stage Frill, of minimum 350 GSM, having uniform weave, matte finish, and high light absorption properties.

Fabric shall be provided with 200% fullness to achieve proper drape and visual masking. Finished size shall be required length x 1.0 m height, as per

stage design. Fabric shall comply with Class 1 flame retardancy and shall have light fastness , ensuring durability under stage lighting conditions. Fabric

11 MR-11 shall be stitched with reinforced double-fold hems, and provided with rust-proof metal eyelets at uniform spacing not exceeding 200 mm c/c, suitable Nos 3 55074.92 165224.76

for fixing on frill bar system. ensuring seamless appearance across full length. Rate shall include fabric supply, stitching, eyelets, reinforcement,

transportation, installation, alignment, and finishing, complete in all respects as per direction of Engineer-in-Charge. Approved Shade : Exisiting Main

Curtain Velvet Shade.

Digitally signed by

DINESHWAR SINGH PHILEM

Providing and supplying of building signage . Madefrom stainless steel 304 grade silver grey, each letter shall be of 0.8 mm thick front laser cut and

12 MR-12 shall have a raising of 38 mm thick wide duly made from CNC benders and laser welded all letters with blue color.All eork complete with approved Job 1 626661.61 626661.61

shade as per instructions of Engineer In-charge

Basement Floor epoxy Coating: P/A of Car Park Floor Coating System:

Consists of Solvent-free Epoxy based Primer with Anti-Slip Grains-and Epoxy based Wear/Top Coat- in approx. 1MM thickness as per Specifications.

Basement Floor epoxy Coating:

P/A of marking of lines for ways over car parking floor coating complete in all respect : color as per EIC

15 MR-15 Supply of Semi skilled manpower as per Minimum wages as per Ministry of Labour, GOI (Rs. Per day) Nos 50 1353.21 67660.50

16 MR-16 Supply of Un- skilled manpower as per Minimum wages as per Ministry of Labour, GOI (Rs. Per day) Nos 100 1259.62 125962.00

(C) MEP DSR ITEMS-DSR-2025

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good

the same in case of recessed conduit as required.

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member" (galvanisation not less than 50 microns)

4.9 with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c

2 base of suitable size GI angle, GI bolts & nuts, fastner etc as required.

4.9.2 150 mm width X 50 mm depth X 1.6 mm thickness Each 100 1486 148600.00

10.7 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

10.7.2 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) MTR 200 151 30200.00

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE

4 aluminium conductor cable of 1.1 KV grade as required.

5 4213 25mm dia gun metal globe valve & nozzle Each 35 691 24185.00

Digitally signed by

DINESHWAR SINGH PHILEM

LED Panel light 2x2 ft., (System lumen efficacy >135 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following

body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt,

frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD <10% , P.

F.≥0.95, IP20, CRI >80,UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of

minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),

SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of

6 8.8.2 relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.complete in all respect i/c external Each 30 2420 72600.00

connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM

warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be

submitted. Shape size and CCT shall be as approved by Engineer-inCharge as per requirement. (Thermal management: heat sink of aluminium housing

such that LED junction temperature shall not rise above 90°C).

Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with

maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm

NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.

Providing, fixing, testing & commissioning of 15mm dia uartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for

9 27.18.1 instantaneous connection to interconnect hose pipe coupling as required: Each 12 4977 59724.00

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with

cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :

11 27.9.1 Singke headed gunmetal Each 3 8208 24624.00

Supplying, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber

12 30.12.2 gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps, collars etc as required complete in all respect in

confirmation with IS : 655 and approved drawings and specifications of following sheet thickness complete as required.

13 30.12.2.1 Thickness 0.63 mm sheet sqm 50 1213 60650.00

14 30.12.2.2 Thickness 0.80 mm sheet sqm 25 1415 35375.00

15 30.12.2.3 Thickness 1.00 mm sheet sqm 10 1851 18510.00

Supplying, laying, fixing, testing and commissioning of following thickness closed cell elastrometric nitrile rubber of class 'O' applied by suitable

adhesive , as per specifications and as required complete in all respect. 19 mm

17 30.9 Providing & fixing in position industrial type mercury thermometers complete etc. as required. Each 20 1132 22640.00

Supplying, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws

linkages, flanges etc in confirmation to SMACNA/IS and as per specifications complete etc. as required.

Supplying, Fixing, installation, testing and commissioning of powder coated extruded aluminium Supply Air Grills with aluminium volume control

dampers in confirmation to SMACNA/IS and as per specifications complete etc. as required.

Digitally signed by

DINESHWAR SINGH PHILEM

Supplying, Fixing, installation, testing and commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per

site requirement etc. in confirmation to SMACNA/IS and as per specifications complete etc. 200mm Dia

Total 819066.00

Total -Add Cost Index @1.01 on DSR items for base rate as on 01.04.2026 827256.66

(D) MEP NDSR Items

1 MR-1 Supply of one number PVC insulated and PVC sheathed / XLPE 3.5C x25 SQMM FRLS power cable of 1.1 KV grade MTR 150 2910 436500.00

Supplying and fixing 32 A, 415 V, TPN Encloser Box outlet, with 4 pole and earth, metal enclosed along with 100 AMP "C" curve, TPN MCCB, in sheet

2 MR-2 steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. NOS 4 18500 74000.00

Supply and laying of 3C x 2.5 Sq.mm, 1.1kV, PVC insulated, FRLS copper cable in existing (conduit/tray/ raceways). End termination to be carried out

from furniture socket and wall panel socket to the respective.

4 MR-4 Supply , installtion , testing and commisioning of 32 Amps TPN industrial socket with RCBO of suitable rating EACH 4 13200 52800.00

5 MR-5 Supply, fixing, installation and commissioing ABC Fire extinguisher as required. No. 12 4289.01 51468.12

6 MR-6 Supply, fixing, installation and commissioing CO2 Fire extinguisher as required. No. 12 10344.07 124128.84

7 MR-7 Supply and installation of Fire man Axe as required. No. 120 939.23 112707.60

8 MR-8 Supply, fixing, installation and commissioing Pressure Guage as required. No. 12 1261.47 15137.64

9 MR-9 Supply, fixing, installation and commissioing FHC glass with rubber as required. No. 3 2775.24 8325.72

10 MR-10 Supply, fixing, installation and commissioing Exhaust Fan as required. No. 10 14296.69 142966.90

Testing, Adjustment, Balancing & Commissioning of complete Air side (low side) for the installed Centralized HVAC system which would involve :

Deployment of 1 Engineer, 2 Technicians, 2 helpers as a team for approx. 4 working days per floor, minor works such as rectification of leakage areas

11 MR-11 with screwing (with or without washer), silicon fixingl in joints wherever required, etc.total 15 team days. (The air balancing activity measures via using per floor 10 60000 600000

suitable tools and tackles along with CFM meter/ anemometers/ digital thermometers/ etc. is part of scope ).Tyhe approximate area of one floor is

1100 sqm. The Office space area doesn’t consist of toilet area, staircase area, balcony area, and service lift area, refuge area, lift area etc.

SITC of Automatic number plate reader system as per specification and scope of work all complete as per instructions of EIC

-AI platform suite engine(centralized software)-1 nos

-Vehicle Entry Exit Management Solution- 2 Nos

12 MR-12 -Front Back Model Training Module-1 nos Nos. 1 1251390 1251390.00

-Intozi AI Box for Processing-1 nos

-Reporting Module (Customized)-1 nos

-Box Camera- 2 nos

Digitally signed by

DINESHWAR SINGH PHILEM

(E) ACCESS CONTROL WORKS

Supply, Installation, Testing and Commissioning of 4-core X 0.75 sq.mm PVC insulated, multi-stranded flexible copper conductor cable in existing

conduit/cable tray.

Supply, Installation, Testing and Commissioning of 2-core X 0.75 sq.mm PVC insulated, multi-strandedflexible copper conductor cable in existing

2 MR-2 conduit/cable RMT 1000 49.875 49875.00

Supply, Installation, Testing, Commissioning of SMART CARD READER with PIN FACILITY and Integration of the same with the existing system of access

ontrol. Frequency : 13.56 MHz Desfire Authentication: Smart only, PIN Only , Smart card + PIN, Visual annunciation : Tri-color LED, “LED off” function

Audio nnunciation : Built-in piezo sounder Reader shall support OSDP communication for monitoring Operating Temperature: -40 to +149°F (-45 to

+65°C) Operating Humidity: 0% to 95%, non-condensing Mounting: Metal mounting compatible Environment and IP rating: IP67 rated weatherproof

suitable indoor and outdoor both,Power draw : 30 mA typical, 75 mA peak @ 12VDC Certifications & Approvals: CE, FCC.

Supply Installation Testing & commissioning of Card Readers License & Software, and Integration of the same with the existing system of access

control.The access control and alarm monitoring system shall be the Enterprise system, The system shall be a modular, networked access control and

4 MR-4 alarm monitoring system, The system shall have the capability to be networked via a LAN/WAN connection utilizing industry standard TCP/IP Nos. 40 90263.775 3610551.00

communication protocol.The system shall provide encryption via the TCP/IP connection, The system shall incorporate the use of bi-directional 485,

communications and/or Class “A” TCP/IP redundant connections for redundancy and reliability.

Supply Installation Testing & commissioning of Double Leaf Lock, including integration with the existing system.Voltage Input: 12 VDC / 24 VD. Current

5 MR-5 Draw: 12V / 500mA; 24V / 250mA (±5%) Holding Force: Up to 600 lbs as per door design Leaf; Single or double as per door design Latch Operation, Nos. 1 15311.625 15311.63

Manual Key Hall Effect Contact : SPDT rated 2A at 24 VDC Anti-Rust Surface Treatment : Blue Zinc Plating, Certifications: UL certified, CE, FCC.

Supply Installation Testing & commissioning of Single Leaf Lock, including integration with the existing system.Voltage Input: 12 VDC / 24 VD. Current

Draw: 12V / 500mA; 24V / 250mA (±5%) Holding Force: Up to 600 lbs or 1200 lbs as per door design Leaf; Single or double as per door design Latch

Operation, Manual Key Hall Effect Contact : SPDT rated 2A at 24 VDC Anti-Rust Surface Treatment : Blue Zinc Plating, Certifications: UL certified, CE,

Supply Installation Testing & commissioning of ACCESS TCP/IP NETWORK CONTROLLER (MASTER), including integration with the existing system. Reader

Port: 2 on board Wiegand reader ports, Supports format : 5 format simultaneously, Communication: On board true TCP/IP, Speed 10/100 Mbps,

Operating environment Temperature: 0 to 70°C Humidity: 20 to 80% RH noncondensing), Controller shall support OSDPv2 communication protocol

Controller shall supports reader interface controller up to 16 readers, Certifications & Approvals: UL294B, UL1076 certified, CE, FCC-class A, EN 50130-

Digitally signed by

DINESHWAR SINGH PHILEM

Supply Installation Testing & commissioning of ACCESS TCP/IP NETWORK CONTROLLER (slave), including integration with the existing system. Reader

Port: 2 on board Wiegand reader ports, Supports format : 5 format simultaneously, Communication: On board true TCP/IP, Speed 10/100 Mbps,

8 MR-8 Operating environment Temperature: 0 to 70°C Humidity: 20 to 80% RH (non-condensing), Controller shall support OSDPv2 communication protocol Nos. 2 98253.75 196507.50

Controller shall supports reader interface controller up to 16 readers, Certifications & Approvals: UL294B, UL1076 certified, CE, FCC-class A, EN 50130-

Supply, Installation, Testing and Commissioning of Emergency Glass Break Unit Dimensions: 88x88x52 mm Contact resistance: 150mm Switch rating:

Supply, Installation, Testing and Commissioning of OVERRIDE KEY SWITCH Standard Structure: Stainless steel panel and waterproof and anti-copy key

Input Voltage: 12 VDC/24 VDC Contact Output: NC contact Current Rating:<=200mA

(F) CCTV CAMERA WORKS

1 MR-1 Supply , installation, testing and commissioning of Dome Camera, Model FD9399-EHTV (Vivotek) or equivalent matching the technical specifications Nos. 20 92650.53 1853010.60

2 MR-2 Supply , installation, testing and commissioning of Bullet Camera, Model- IB9399-EHTV (Vivotek) or equivalent matching the technical specifications Nos. 26 99777.5 2594215.00

Supply , installation, testing and commissioning of PTZ Camera, SD9368-EHL KIT [SD9368EHL with Mid Span POE & Std. Mount] (Vivotek) or equivalent

matching the technical specifications

GRAND TOTAL 2,32,73,169.15

GRAND TOTAL 2,32,73,169.15

Digitally signed by

DINESHWAR SINGH PHILEM