SPECIAL REPAIRS TO BATHROOMS AND CONNECTED WORKS AT GORKHA HILL BLOCK NO 01 TO 09 AT DSSC WELLINGTON

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Note :- Rates shall be quoted with required scafolding for a height upto 10 meter buildings till plaster/ pointing and finishes.

Demolition of Concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified

Demolition of Concrete any description and in any position not otherwise specifically provided for complete all as specified

Dismantling of floor hearth or wall tiling of any description including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling of chajjs/ roof projection etc finished even and smooth without using extra cement complete as specified and directed. Note :- Rates shall be quoted with required scafolding for a height upto 10 meter buildings inclusive of working whereever required

M&L Rendering 20 mm thick in floors in CM 1:3 finished even and smooth without using extra cement on concrete or brick surfaces with water proofing compound in sunken floor complete all as specified and as directed. Note : WPC shall be measured and paid separately (where ever applied)

M&L Rendering 10 mm thick in vertical surface in CM 1:3 finished even and smooth without using extra cement on concrete or brick surfaces with water proofing compound in sunken floor complete all as specified and as directed. Note : WPC shall be measured and paid separately (where ever applied)

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even & smooth (without using extra cement), for internal surfaces complete all as specified and as directed. Note : 1. WPC shall be measured and paid separately (where ever applied)

Supply only Liquid water proofing compound all as specified and as directed.

M&L for providing and laying water proofing treatment to sunken floors portion of WC, bathroom etc by applying first layer of slurry of cement @ 0.488 kg/sqm mixed with make : Dr Fixit or equivalent in asian paints/ FOSROC chemicals, Acrylic based Polymer modified cementitious (PMC) compound @ 0.242 kg/sqm mixed with acrylic based PMC compound @ 0.126 kg/sqm complete all as specified and as directed.

M&L High density polyethylene pipes (HDPE) of 40 mm dia of pressure rating 6 kgf/cm2 laid in trenches for sunken floor and wash basin area complete all as specified and as directed.

M&L Cement concrete 1:4:8 (40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M & L PCC Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 25 mm thick as in floor all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick cement mortar 1:6 screed bed in white or coloured cement to match all as specified and directed.

M&L Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match 10mm thick cement mortar 1:4 plaster in white or coloured cement to match all as specified and directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed including 15mm thick cement mortar 1:6 screed bed in white or coloured cement to match all as specified and directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles in skirtings not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed including 10mm thick cement mortar 1:4 plaster in white or coloured cement to match all as specified and directed.

S&F in repairs for removal of old PVC/cast iron floor trap incl wall crossing pipe and grating and fixed with new outlet 75mm PVC SWR floor trap with stainless steel grating and new wallcrossing and filling with PCC 1:2:4 with WPC incl matching with existed tile and jpining with ourter pipeline with solvent complete all as specified and directed.

M&L for providing cement concrete Type B1 ( 1:2:4) ( 20mm graded aggregate) in roof kerbs or mud stops , over chajjas as padding, rounded or chamferd on edges complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of Oil Bound Distemper over one coat of primer on wall complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of Oil Bound Distemper over one coat of primer on wall complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of Oil Bound Distemper over coat of primer on ceiling complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying one coat of Oil Bound Distemper over one coat of primer on ceiling complete all as specified and directed.

M&L for 3mm thick wall care putty on wall complete all as specified and directed.

M&L for 3mm thick wall care putty on ceiling complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.5 Sqm each with shutters (without taking off shutters from frame). Complete all as specified

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each (without taking off shutters from frame).

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Make:M/S RAJSHRI PLASTIWOOD / M/S SARVESH MULTIPLAST INDIA PVT LTD/CENTURY PLY

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) Make:M/S RAJSHRI PLASTIWOOD / M/S SARVESH MULTIPLAST INDIA PVT LTD/CENTURY PLY

S & F factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed.(Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply & Fixing MS Butt hinges medium weight cold rolled & fixed 125 mm long all as specified and as directed.

Supply & Fixing in aluminum anodized barrel tower bolts of extruded section 150 mm long all as specified and as directed.

Supply & Fixing aluminum handles, cast type, anodised extruded section 150 mm long all as specified and as directed.

S&F Aluminium alloy anodised sliding door 300mm size bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed size 300mm long.

Supply & Fixing MS work as in hold fast etc conforming (Fe-290 Gde-165) complete all as specified and as directed

Taking up or down steel tubing and connections including cleaning for reflixing or removal to store of size 15 mm, all as specified.

Taking up or down steel tubing and connections including cleaning for reflixing or removal to store of size 20 mm, all as specified.

Supplying and laying of 16 mm nominal dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings of class 1 fixed in walls and ceiling complete all as specified and as directed

Supplying and laying of 20 mm nominal dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings of class 1 fixed in walls and ceiling complete all as specified and as directed

S & F for 3/4 x 1/2 (20 X 15 mm) dia brass Eblow of 16mm for CPVC complete all as specified and as directed

S & F for 20mm dia brass Eblow for CPVC complete all as specified and as directed

S & F for 16mm outer dia Male Brass Threaded Adaptor (MTA/ MBTA) for CPVC complete all as specified and as directed

S & F for 20mm Male Brass Threaded Adaptor (MTA/ MBTA) for CPVC complete all as specified and as directed

S & F for 16mm outer dia Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC complete all as specified and as directed

S & F for 20mm Female Brass Threaded Adaptor (FTA/ FBTA) for CPVC complete all as specified and as directed

S & F for 16mm outer dia Brass Tee for CPVC complete all as specified and as directed

S & F for 20mm Brass Tee for CPVC complete all as specified and as directed

S&F wash basins in repairs vitreous china of size 550 x 400 x 200 mm including cutting for and pinning in ends of brackets or erecting stand, inclusive of coupling fixing of supply and waste pipe 32 mm bore with chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed bottle trap, 450 mm long PVC connections with PTMT unions, etc complete all as specified and as directed. Make : Parryware /Hindware/Prayag or techno comercially equivalent

S&F in repairs single piece Vitreous China wash down water closet pan (pedestal pattern), colour white, closed pattern with flat bottom and seat cover and mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) complete all as specified and as directed. Make : Parryware /Hindware/Prayag or techno comercially equivalent

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixing in pipe etc. in position complete all as specified and as directed.

S&F in repairs Angle stop valve 15mm of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and as directed.

S&F for Chromium plated fancy type 2in1 bib tap fixed with existing pipe all as speicified and as directed fixed in repair complete all as specified and as directed.

S&F for PVC Connections for 15mm size 450mm length and fixed in repairs complete all as specified and as directed.

S & F in repairs over head shower rose brass chromium plated 125mm square/ round shape with shower arm complete all as specified and as directed.

S&F for Gratings 125mm dia with/ without waste hole, fixed in repairs complete all as specified and as directed.

S & F in repairs chromium plated or stainless steel toilet paper roll holder complete all as specified and as directed.

M&L PVC (SWR) floor trap 75 mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement complete all as specified and as directed

S&F CP single lever basin mixer without pop up waste system for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. Make : Prayag /Parryware/Hindware or techno commercially equivalent.

S&F Brass CP 3 in 1 wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. Make : Parryware/ Hindware/Prayag or techno commercially equivalent.

S&F Towel Rail of stainless steel 600 mm chromium plated of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.. complete all as specified and directed.

All as per Item No-2 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm 3 pin socket outlet, for independent complete all as specified and directed.

S&F Modular type socket out let 2/3 pin, 6/16 Amps, 2 module all as specified and as directed.

S&F Modular type switch single pole 16 Amps one way, 1 module all as specified and as directed

S&F Modular type switch single pole 6 Amps, 1 module, one way all as specified and as directed.

S&F ceiling rose surface mount PVC/Polycarbonate, isolated body with face bakelite two/three terminals complete all as specified and directed.

S&F modular white cover plate with frame, 2 module complete all as specified and directed.

S&F modular white cover plate with frame, 3 module complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC , (4 ft.) High performance electronic driver , operating temperature 10 C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 Im/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make Havells cat part No LUMILINEPLUSPROBS20WLED865SPCSSIND OUG G

Please Enable Macros to View BoQ information