REPAIRS TO LEAKAGE, SEEPAGE AND REPAIRS TO JOINERY, ROLLING SHUTTERS TO CERTAIN BUILDINGS AT 2 AFSB MYSORE

Amount

S&F in repair Aluminium, anodised, barrel tower bolts 200mm long of extruded section.

S&F in repair Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F in repair Butt hinges 100mm size, medium weight, cold rolled mild steel.

S&F in repair Butt hinges 75mm size, medium weight, cold rolled mild steel.

S&F in repair mild steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete

S&F in repairs floor door stopper 140 mm in length of aluminum alloy body and tounge anodised with hard drawn steel spring fixed in floor.

S&F in repairs Aluminium (Diecast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width & of weight between 36 to 60kg.

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire & average width of aperture 1.40mm with tinned tacks, or galvanised wire staples

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing new ones.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane.

S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each.

S&F 2nd class soft wood 30 mm in thickness wire gauzed & skeleton shutters, open rebated & prepared to receive wire gauze, etc. edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire & average width of aperture 1.40mm with tinned tacks, or galvanised wire staples

S&F in repairs 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides

Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer

S&F Aluminium, anodised, barrel tower bolts 150 mm long of extruded section.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel.

S&F Aluminium handles 100mm size, cast type, anodised

S&F 150 mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring.

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with M.S Square tubes, supporting & fixing in opening as per specification all as specified and as diercted.

S&F factory made solid PVC Moulded door shutter ,30 mm thick (style)consisting of frame made out of MS tubes for top & Bottom rail , MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail : panelling of both side prelam PVC sheet to be fitted in the ms frame welded/sealed to the stiles & rails with suitable PVC seat beading ,and jointed together with solvent cement ,supplying and fixing in the frame at site as per specified and directed by Engr-in-Charge.

S&F Butt hinges, medium weight cold rolled mild steel 100 mm in size.

S&F Aluminium alloy, anodised, sliding door bolt 150 mm in length, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

S&F Aluminium anodised, barrel tower bolts of extruded section, 100 mm in length.

S&F Aluminium handles, cast type 75 mm in size.

Taking down hood covers of gear operated rolling shutters of opening width exc 4.00 m and height exc 5.00 m, keeping shutter for repair, cleaning old grease, dust etc from gear box, vertical rod, bushes, bearings, springs and guide channels, complete lightening of shutter, strips and other parts, greasing/oiling of all moving components incl springs, minor welding works if required and replacement of worn out/unserviceability or rolling shutter for proper functioning.

All as per SI item no 43 here-in-before but width n exc 4.00 m and height n exc 5.00 m.

Repair to collapsible steel gates n exc 9 sqm, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners position and securing runners with hold fast and brackets, complete greasing and oiling to movable position and replacing old runners if required.

S&F in repair harrison rails, aluminium alloy powder coated with fixing brackets, stops,etc.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Taking down cement plaster on any description including scrubbing down with water and prepare to receive new plastering.

M&L for 15 mm thick water proofing cement plaster on concrete surfaces in CM 1:4 finished even and smoth with out using extra cement.

Supply only liquid water proofing compound

M&L for Applying oil bound bituminous primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not.less than 4.0 Kg/Sqm reinforced with non Woven polyester matt weighing not.less than 150o Centigrade , having tensile strength of 650 N/5 cm and 350 N/5 cm in longitudnal and transverse direction respectively of the reinforcement, tearing strength of 180N by torch application with minimum 10 cm side over lap and 15cm over lap, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg /sqm over the membrane a coat of solar reflective bituminous aluminium paint @ 0.10 Kg per sqm all as specified.

Material and labour Cutting out cracks to V-section in existing roofs , cleaning out wetting,grouting with cement and sand slurry in Cement mortar 1:1 with water proofing compound.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store boreof pipe in 20 mm.

Refixing old steel tubing and connection in new or old position (walls, ceiling, floors, etc.) bore of pipe in 20mm .

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe in 15mm.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)

S&F Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed , bore of pipe 20mm.

Disconnecting existing tanks, setting aside (or lowering if required ) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position . Capacity of tank 500Lts.

Suneetha Engineers and Contractors