Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.9 LAccepted-AOC MILITARY HOSPITAL ROAD UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC L1 | |
| 2 | L2₹8.4 L+₹54,814 (6.96%)Rejected-Finance | L2 | Rejected-Finance BEING L2 |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF UDHAMPUR
GE AF UDHAMPUR
PROVISION OF CERTAIN MINOR WORKS AT AIR FORCE STATION NATHATOP
2023_MES_573805_1
GE/AFU-63/2022-23
Open Tender
Civil Works
Item Rate
180 days
NATHATOP
AS PER NIT AND TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE AF UDHAMPUR
₹18,000
Yes
20 Feb 2023
9 Jan 2023
13 Feb 2023
9 Jan 2023
11 Feb 2023
24 Jan 2023
9 Jan 2023 - 16 Jan 2023
Amount
SCH A PART-I (B/R WORKS)
Excavating in trenches not exceeding 1.5m wide and n.exceeding 1.5m in depth; for any type of soil for foundation, laying of cable, laying of pipe etc and getting out complete all as specified and directed by Engineer-in- Charge.
M&L for PCC 1:4:8 type D2 (40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer-in- Charge.
M&L for random rubble stone masonry walling uncoursed, well bonded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engineer-in- Charge.
M&L for brick work in cement mortar 1:6 with sub class `B' bricks straight or curved on plan exceeding 6 m mean radius complete all as specified and directed by Engineer-in- Charge.
Returning, filling in, including spreading,leveling, watering and well ramming in layers not exceeding 25 cm with excavated soil complete all as specified and directed by Engineer-in- Charge.
Removing excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in- Charge.
M&F for 40 mm thick Damp proofing course with PCC 1:2:4 type B0 (using 12.50 mm graded stone aggregate ) to horizontal or vertical surface including necessary form work complete all as specified and directed by Engineer-in- Charge.
Supply only integral water proofing compound conforming to relevant IS complete all as specified and directed by Engineer-in- Charge.
M&L for RCC (nominal mix) 1:2:4, type B-1 (20 mm graded aggregates) as in RCC Beams, contilevers, bressummers, lintels over 1.50 m span complete all as specified and directed by Engineer-in- Charge.
M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in- Charge.
M&L for mild steel TMT bars 6 to 8 mm dia as in stirrups , spacers etc and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in- Charge.
S&F mild steel roof truss ( framed ) , trussed , purlins , crane gantries , rails and fastenings and heavy bracket framing ( beam , tee , angle , channel or flat sections ) including distance pieces , cleats conforming to Fe 410-W ( Gde -E-250 ) quality-A complete all as specified and directed by Engineer-in- Charge.
S&F 0.63 mm thick galvanised corrugated mild steel sheeting, Zinc coating 275 , grade 'B' with two corrugation side lap, fixed with L-type or J -Type hook or cranked hook bolt and washer as in roof covering complete all as specified and directed by Engineer-in- Charge.
S&F Plain galvanised mild steel Sheeting 0.80 mm thick as in ridges, hips, valley gutters drip and straight flashings ( length and girth as fixed ) with zinc coating of 275 gm /Sqm fixed with 'J' hook or suitable bolt complete all as specified and directed by Engineer-in- Charge.
M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface exc 10 cm width or girth complete all as specified and directed by Engineer-in- Charge.
S&F anodised aluminium frame for door, wondows, ventilatores with one or more rebates inlculding joining cleat for fixing etc complete all as specified and directed by Engineer-in- Charge.
S&F 5 mm thick tinted sheet glass ( one side mirror finish) of any size glazing with aluminium framework including necessary rubber gasket and aluminium snap beading complete all as specified and directed by Engineer-in- Charge.
M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in- Charge.
M&L for rendering 15mm thick in two layer ( 10 +5 ) mm with cement mortar (1:4) on fair faces of brickwork or concrete surfaces, top layer mixed with WPC including finished the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in- Charge.
M&L for glazed ceramic colour tiles (300x200)x7mm thick in skirting/dados etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and directed by Engineer-in- Charge.
M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded aggregate ) as in subbase of floor complete all as specified and directed by Engineer-in- Charge.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) of size exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over 10 mm thick screed bed or bedding layer in CM(1:4) and 25 mm thick PCC 1:2:4 type B0 sub floor complete all as specified and directed by Engineer-in- Charge.
M&L for 75 mm thick plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate ) as in plinth protection laid in alternative bays and joints shall be filled up with bituminous gola with 80/25 bitumen (1 part of bitumen to be mixed with 3 part of sand ) including finish the surface even and fair complete all as specified and directed by Engineer-in- Charge.
M&L for hardcore with broken stone or boulders n.exc 63 mm gauge, deposited, spread in layer n.exc 15 cm thick, watering and ramming to a true surface complete all as specified and directed by Engineer-in- Charge.
M&L for applying three coats of white wash on new plastered surface of wall including preperation of newly plastered surface complete all as specified and directed by Engineer-in- Charge.
S&F of Vitreous china wash down water closet pan (pedestal pattern) with 'P' or 'S' trap, white with necessary seat cover including connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe complete all as specified and directed by Engineer-in- Charge.
S&F of 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed by Engineer-in-Charge.
S&F of 15 mm bore GI tube trenches, medium grade with all fittings such as tee, bend, elbow, union etc) fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in- Charge.
All as per item No-1.28 above but 20 mm bore complete all as specified and directed by Engineer-in- Charge.
S&F of Chromium Plated Bib taps 15 mm bore cast copper alloy with crutch or butterfly handle, screwed for iron pipe fancy type complete all as specified and directed by Engineer-in- Charge.
S&F Chromium Plated Stop valve / Angle valve 15 mm bore, cast copper alloy, fancy type, screwed for iron pipe complete all as specified and directed by Engineer-in- Charge.
All as per item No-1.31 above but 20 mm bore complete all as specified and directed by Engineer-in- Charge.
S&F of PVC connection 15 mm bore with PTMT nut of length 450 mm complete all as specified and directed by Engineer-in- Charge.
S&F of 32 mm bore PVC waste pipe for wash hand basin/Urinal complete all as specified and directed by Engineer-in- Charge.
S&F of Vitreous china Urinal bowl type flat back , size 465 X 355 X 265mm white with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including 15 mm bore stop valve cast copper alloy complete all as specified and directed by Engineer-in- Charge.
S&F of rotational moulded PVC water storage tank 500 ltr capacity, hoisted & fixed in position on 15 cm thick PCC 1:2:4 type B-1 bed with 4 Nos MS angle iron of size 50x50x5 mm, 1 mtr long fixed as support to tank complete all as specified and directed by Engineer-in- Charge.
S&F of 20 mm bore Ball brass valve with polythene float and flynut , screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer-in- Charge.
Surface excavation n.exc 30 cm deep and averaging 15 cm depth and getting out of any type of soil complete all as specified and directed by Engineer-in- Charge.
M&L for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in subbase of floor complete all as specified and directed by Engineer-in- Charge.
M&L for 25 mm thick PCC 1:2:4 type B0 using 12.50 mm graded aggregate below tile flooring complete all as specified and directed by Engineer-in- Charge.
M&L for 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified and directed by Engineer-in- Charge.
M&L for PCC coloured chequared cement concrete tile of size 20cm x 20cm x 25mm thick as in floor, set, jointed and pointed in neat cement slurry with grey cement and no pigment complete all as specified and directed by Engineer-in- Charge.
M&L for PCC (1:3:6 ) type C-2 using 40 mm graded stone aggregate as in concrete bed to 150mm dia drain pipe including packing under, and haunching against the sides of pipe after they are laid and tested complete all as specified and directed by Engineer-in- Charge.
M&L for salt glazed stoneware drain pipe 150mm bore grade 'A' laid in trenches and jointed in cement mortar (1:1) and tested complete all as specified and directed by Engineer-in- Charge.
S&F of 110 mm dia PVC Pipe complete all as specified and directed by Engineer-in- Charge.
S&F of 75 mm dia PVC Floor trap complete all as specified and directed by Engineer-in- Charge.
M&L for plain cement concrete 1:2:4 type B0 ( using 12.5 mm graded stone aggregate as in cills, copings, bed block including necessary formwork complete all as specified and directed by Engineer-in- Charge.
M&L for precast RCC (1: 2:4) Type B-1 (using 20 mm graded stone aggregate ) as in manhole cover and set in position with cement mortar (1:4) complete all as specified and as directed.
Cutting into existing manhole for connecting new drain pipe of 150 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed by Enginner-in-Charge.
S&F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and directed by Engineer-in- Charge.
S&F Factory made solid Panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for styles and Plain colour sheet PVC for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail supplied and fixed as per SSR instructions complete all as specified and directed by Engineer-in- Charge.
S&F Butt Hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 100mm long complete all as specified and directed by Engineer-in- Charge.
S&F Aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed by Engineer-in- Charge.
S&F Aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as specified and directed by Engineer-in- Charge.
S&F 12mm thick Toughened Frosted glass door of any size with EDPM rubber/ neoprene packing to make air proof fixed with necessary fittings including locks, handle, of suitable size, autoclosure, stopper etc complete all as specified and directed
Taking down chowkhat with shutter exc. 1.50 & n. exc. 4.00 Sqm each (without taking off shutter from the frames) complete all as specified and as directed
Demolition of cement concrete unreinforced in ground floors and pavings n. exc 15cm thick (below or above ground level) complete all and removing the rubbish out site the MoD land as specified and directed
M&L for laying machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness of M-35 Grade with grey cement and pigment complete all as specified and directed
M&L for 50mm thick sand cushion under concrete block including watering and ramming complete all as specified and directed
M&L for rendering 15mm thick in CM (1:6) on isolated widths of internal surfaces of brick work or concrete surfaces disturbed at the time of taking down chowkats, finished surfaces even and smooth (without using extra cement) including preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed
SCH 'A' PART-II (E/M WORKS)
M&L for copper point wiring (light, socket or power) complete (fittings such as switches , ceiling roses , pendants , sockets etc. to be measured seperately ) and making good disturbed surfaces of walls etc . One light point or one fan point controlled by one switch with cables 1.50 Sqmm size .
M&L for copper point wiring (light, socket or power) complete (fittings such as switches , ceiling roses , pendants , sockets etc. to be measured seperately ) and making good disturbed surfaces of walls etc . One light point or one fan point controlled by one switch with cables 2.50 Sqmm size .
S&F of exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed
S&F of 5 Amps switch piano type complete all as specified and as directed .
S&F of 15 Amps switch socket combination complete all as specifeied and as directed
S&F of MCB DB 8 Way complete all as specifeid and as directed.
S&Fof MCB SPN 63 Amps complete all as specified and as directed.
S&F of XLPE cable armoured heavy duty 2 core 10sqmm laid in floor wall or in trenches complete all as specified and as directed
Supply and install HOT and COLD Type invetor split AC Copper wound wall mounted indoor/outdoor complete with cordless remote control unit of capicity 1.5 Ton 3 Star ,cooling capicity 5200 watt heating capicity 5600 Watt,R-32 , refrigrant,low indoor noice less than 48 dB, dust filter Air Purifier stablizer free operation, Cu connecting pipe length upto 5 Mtr/ connecting cable upto 5 mtr including outdoor unit mounting bracket factory made suitable for fixing outdoor unit etc and making holes in wall and making good after installation complete all as specified and as directed. Make : Blustar/ Voltas/ Hitachi or equivalent
S&F AC Voltage stabilizer wall mounting with low and high voltage cut off, thermal overload protection , intelligent time delay system, capacity15 Amp, voltage working range 130-280Vac, time delay 3 minute +/- 20 sec ITDS Make : V Guard/ Voltas/ Microtek or equivalent
S&F route pipe (copper tube) of size 5/8" dia with insulation complete all as specified and directed by Engineer-in-Charge.
S&F MCB SPN, 415 V, 32 Amps with breaking capacity 10 KA 'C" Curve complete all as specified and directed by Engr -in-Charge.
S&F MCB SP, 415 V, 6 to 32 Amps with breaking capacity 10 KA 'C" Curve complete all as specified and directed by Engr -in-Charge.
S&F single pole of sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps flush mounted off complete all as specified and directed. Make:Legrand/HAVELLS / Indoasian
Sheet metal enclosures for DBs SPN 4 way single pole and neutral single door 240Volts , 200 Amps Bus bar Volt With metal door to be used) flush mounted DBs /board /box including accessories therein and disposing off complete all as specified and directed.
Point wiring for one 16 Amps socket outlet independent with PVC insulated, unsheathed FRLS multi stranded copper conductor 4.0 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigid surface conduit, heavy duty, 19/20mm dia, ISI marked, with and including new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 4.0 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified.
M&L for Point wiring 16 Amps socket outlet independent board with PVC insulated, unsheathed FRLS multi stranded copper conductor 2.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigid concealed conduit, heavy duty, 19/20mm dia, ISI marked, with and including new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 2.5 sqmm (nominal area) copper conductor heavy duty cable, multi stranded FRLS cable as earth wire and connected to earth duly complete including cutting chases to wall and making good the disturbed surfaces to match with the existing surface complete all as specified and directed by Engineer-in-Charge
Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through PVC surface/concealed conduit and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Note: Two runs each of one RM of 4.00 sqmm main cable and one RM of 4.00 sqmm cable earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.
M&L for MCB SPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed.
S&F of RO 100 lph Plant High Purificatin cap 100 ltr per Hr , multiple purification by RO+UV+UF+TDS controler Fully automatic operation with auto-on/off RO Purifier for instalation before supply line to water tank Stainless steel construction for corrosion free lifespan including arrangement of RO on /off depending on water level in water storage PVC tank etc complete all as specified and as directed by Engr- in- charge Note : RO Rate include cost of civ wks for instalation such as foundation welding internal work /wall hanging including plumbing etc complete all as specified and directed by Engineer in charge.
S&F of RO 100 lph Plant High Purificatin cap 50/60 ltr per Hr, multiple purification by RO+UV+UF+TDS controler Fully automatic operation with auto-on/off RO Purifier for instalation before supply line to water tank ABS construction for corrosion free lifespan including arrangement of RO on /off depending on water level in water storage PVC tank etc complete all as specified and as directed by Engr-in-charge Note : RO Rate include cost of civ wks for instalation such as foundation welding internal work /wall hanging etc including plumbing complete all as specified and directed by Engineer in charge.
S&F GI water tubing of 20MM bore, medium grade galvanized with all fittings (such as tee, bend, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floor, complete all as specified and directed. Note. Rate quotted includes civ work / road cutting/ wall cutting/ floor cutting and making good damaged portion matching with existing surface with all existing finisheses.
S&F GI water tubing of 15MM bore, medium grade galvanized with all fittings (such as tee, bend, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floor, complete all as specified and directed. Note. Rate quotted includes road cutting/ civ work wall cutting/ floor cutting and making good damaged portion matching with existing surface with all existing finisheses.
S&F 1000 Ltr Capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including tank nipple reducer socket elbow of suitable size of tanks etc all as specified in SSR Part I complete all as specified and as directed.
M&L for Lagging to GI pipes 20mm bore in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed
M&L for Lagging to pipes used GI Pipe 15 mm in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed
M&L for Stop /gate Valve 20 mm bore cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
M&L for Stop /gate Valve 15 mm bore cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
M&L for Plug type bib taps, cast iron, screwed for iron pipe and fixed of size 20 mm bore complete all as specified and as directed
Cutting existing steel tubing for alterations or additions (Each cut measured) &Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and as directed.
Supply laying, connecting and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 25 sqmm 4.0 core land in trenches or passing through pipes/ ducts complete all as specified and directed by Engineer-in-Charge.
Dry sand cushioning to undergorund cable all as per clause 19.75 of SSR Part-I laid before and after laying of cable, complete all as specified and directed by Engineer-in-Charge. Note. After punning down shall be measured 18cm
Sub class 'B' old size bricks well burnt as covering to undergound cables, laid dry, flat over the cables on sand cushioning with width equal to length of the brick as mechanical protection to cable complete all as specified and directed by Engineer-in-Charge
S&F 80mm dia GI tubing, light grade, for protection of cable passing across the road, under floor etc, complete all as specified and directed
MCB distribution board having IP-54 protection, powder coated, double door, flush mounted complete with locking arrangement suitable for 4 way SPN with 200 Amp rated bus bar 203 volt AC supply including assessories therein complete all as specified and as directed
Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN32 Amps complete all as specified and as directed
M&L for plain cement concrete (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed
Cutting of road (in hard/ dense soil) for laying pipe line or repair to pipes of any size upto 01 mtr. Depth and getting out including forming bottom surface to required level and making good the road as per existing bitumens, concrete complete all as specified and directed by Engineer-in-Charge
S&F of Electronic Hotter Dynamically balanced siren including electric connection range of hooter 1.5 Km complete all as specified and directed.
rajkumar sharma
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .