Facia work and various civil works at court Room at RERC bldg. Sahkar Marg, Jaipur

Amount

(Item Rate Basis)

P/F wooden wall panelling having batten grid at 600mm c/c both ways (Batten made of 19mm block board, batten size 38x40mm) fixed on wall face in proper line and level secured and screwed in wall at each joint with packing of board/ply for keeping the pannels in line and level, with 9mm ply on face (veener and melamine will be paid seperately)

P/F Bansi pahadpur gate decortive pillar with good finishing suitable for door opening 8 ft height as per enclosed drawings

Decorative stone pieces to be fixed on side of gate post having size 977x375mm as per drawing enclosed

S/F Bansi Pahad pur pink stone/equivalent stone stone side kanwalies (Jams) up to 3" thickness find dressed including minor cut stone work in faces. Complete labour, material T&P and fixing charges (including material and T&P) in existing building complete as per enclosed drawing sand direction of Engineer in charges for Dubari,tibari, Jali & Jharoka.

S/F Bansi Pahad pur pink stone/equivalent stone kangoora find fressed and onamental cut work up to 1/2" depth or as per enclosed drawing the thickness of the stone shall be paid separately), complete labour material T&P lift up to the 5Mtr. And material required for the fixing in existng windows proch etc. complete as per direction of Engineer in charges.

S&F stone Bansi Pahad pur pink stone/equivalent stone Dasa (sills) find dressed up to 15cm thickness including Panay as per drawing cut stone work type ornamental work complete labour material, T&P fixing charges with labour and material in existing building complete lift up to the height of 5mtr. Depth of carving about 1/2" o as per drawing enclosed of the same complete as per direction of Engineer in charges. (a) Panay Dasa 6" high and 11/2" thick.

Providing edge moulding to sand pink sand stone ( Bansi pahadpur) complete as per design approved by Engineer. (a) upto 20mm thick

(b) 20mm to 40mm thick

(c) 40mm to 75mm thick

S/F bansi Pahad Pur Pink stone/ equivalent chajjas about 1' to 2' projected portion having thickness at the support 3"and the edge of the chajja about 2"round in shape and the end and clear water drop by mean of grooving about spacing from the edge 11/2"with cashing of the chajja minimum 6" to 8" below the galat and above the lintel as per direction of engineer in charge complete as per enclosed drawing. (Exposed surface to be measured for payment)

S/F of Bansi Pahad pur pink stone/equivalent todis for tibaries or Dubaries and cut stone work exposed 9''x6'' below ornamental sill stone cut stone work as per drawing thickness of the todi shall respect including fixing etc. as per direction of Engineer in charge

P/F stone decorative pieces above kangora of bhansi pahadpur stone/equivalent of size 150x150x286 fixed in cement mortar having design made by grooving as per drawing and approved by engineer incharge complete

Chander Const. Co