REPAIR/REPLACEMENT OF FENCING, COMPOUND WALL, RCC JALI, DRAIN, HARD STANDING UNDER AGE B/R-I OF GE (AF) SUBROTO PARK

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of brick work masonry built in CM incl all square, arches, pillars etc but excl ashlars facing dressed stone work and pre-cast oncrete articles.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

Dismantling expanded metal, any thickness or mesh(fencing), fixed with steel or wood fillets, if any. complete all as specified and directed.

Taking down cement plaster in cement mortar on brick or stone walls / ceilieng etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cm (1:4) complete all as specified and directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L cement concrete 1:3:6 type C2 (40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M & L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type weighting complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire including taking down old one complete all as specified and directed.

M & L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of shank 5 to 10 mm complete all as specified and directed.

M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

S&F Roof trusses, trusses, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, chaneel, flat or squre tubes sections) including distance pieces all as specified and directed.

S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walll fixed with self tapping screws all as specified and directed by Engineer-in-Charge.

S & F 3 mm thick Fibre glass reinforced translucent plain coloured sheeting with coach screw and washer in roof, wall etc including taking down complete all as specified and directed.

M&L for Providing cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in surface channel and drains complete all as specified and directed.

M&L for cleaning of drain of any depth and any size removing deposited soft / loose soil and other foreign material and removal of excavated material out side of defence land incuding removing of drain over and refixing the cover at same places complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work finished even and smooth surface complete all as specified and directed

M&L Mild steel TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed

M & L for providing precast cement concrete in landing, cover slabs (for manholes etc), drain over, shelves & similer work type B-1 1:2:4 ,20 mm graded aggregate set in 1:4 complete all as specified and directed

M & L in repairs for providing precast cement concrete louvres and jallies, 25mm thick (measured solid), in cluding all mouldings but excluding frame with cement concrete type B-0 (1:2:4) (12.50 mm graded stone aggregate) set in cement mortar (1:4) complete all as specified and directed

M&L for Providing, cement concrete in roof,side kerbs stone or mud stops, copping, flooring, rounded or chamfered on edges making good disturbed surface of ground including formwork Type B-0 1:2:4 (using 12.5mm graded stone aggregate) complete all as specifed and directed

S&F in repair 3mm thick ACP wall cladding sheet in colour fixed on MS frame . The size of each panel not exc 1.5sqm. MS frame to be fixed on walls, chajja and fasad with Min 08 Nos GI fastener 5" long per 1.5 sqm, including all necessary repairing work as reqd, two coat of synthetic enamel paint over one coat of red oxide primer, including weather sealing sealent, masking tape, including cutting of V groves to fixing moulded ACP sheet self-tapping screw complete all as specified and directed . Note:-1.Work to be carried out upto four storey bldg with MS scaffolding not bamboo. 2. MS frame should be fixed on wall after painting.

M & L for Welding in repairs exc 2.5cm but n exc 5mm running lenth with metal thickness Exc. 6mm but Exc. 9mm in length complete all as specified and directed

S & F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including taking down old one complete all as specified and directed.

S&F galvanised concertina coil dia wire not less than 2.50 mm, coil dia not less than 610mm, zinc coating min 275 gm/RM, weight of coil not less than 1.40kg/Rm including securing and tying with galvanised mild steel wire staplesor steel pins etc including taking down old one complete all as specified and directed.

M&L for granite 20 mm thick ( of any type ) work tabel rubbed and polished for column or wall etc 15 mm thick in cement mortar 1:4 and pointing with white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite including taking down old one complete all as specified and directed.

M & L for coloured designer exterior tiles of size exc 0 .0675 sqm but not exc 0.12 sqm and thickness 6mm to 9mm thick , joint free as in vertical surface of wall such as skirting /daddo over and including 10 mm thick screed bed or bddding layer in CM (1:4) including dismantiling old one complete all as specified and directed

S&F in repair for 10-15mm thick exterior PVC wall cladding (Jalli) sheet of medium denasity in colour white or as directed by Engr-in-charge with compterised numerical control (CNC cutting) as directed, fixed on MS frame. The size of each panel not exc 1.5sqm. MS frame to be fixed on walls, chajja and fasad with GI fastener 5" long per 1.5 sqm, including all necessary repairing work as reqd, two coat of synthetic enamel paint over one coat of red oxide primer, including weather sealing sealant, masking tape, including cutting of V groves to fixing molded PVC sheet with S/S self-tapping screw complete all as specified and directed by Engineer-in-Charge. Note:-1.Work to be carried out up to four story bldg with MS scaffolding not bamboo. 2. MS frame should be fixed on wall after painting.

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes complete all as specified and directed

M&L for coloured chequered cement concrete tiles 25cm x25cm or 30cmX30cm x22/25 mm thick, set, jointed & pointed in neat cement slurry over 15 mm screed bed in CM (1:6) , including taking down old one and removing of debris away from MOD land complete all as specified and as directed by the Engineer-in-Charge.

M& L for 60 mm thick, M-35 grade machine pressed precast interlocking concrete coloured (Red/yellow) paver block over 25 mm thick sand cushioning in any shape and size with grey cement and pigment as approved confirming to IS 15658-2006 including taking down old one complete all as specified and as directed

M & L for prepolished machine cut kota stone slab flooring 20-22 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror polish and taking down old one complete all as specified and as directed

M&L preparation of new steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for one coat of synthetic enamel paint including preparation of old decorated steel surfaces / concrete surface of any description over 10 Cm width or girth not otherwise described.

M&L for two coat of synthetic enamel paint including preparation of old/new decorated stone surface /concrete surface /kerb stone etc of any description over 10 Cm width or girth not otherwise described complete all as specified and directed.

M & L for Preparing plastered or unplastered new surfaces of walls/RCC Jalli and applying two coats of Exterior grade Premium Acrylic smooth paint weather proof emulsion paint of (white or tinted) including one coat of exterior primer Complete all as specified and directed by Eng-In-Charge.

M & L for Preparing plastered or unplastered old surfaces with complete removal of existing treatment of walls/RCC Jalli and applying two coats of Exterior grade Premium Acrylic smooth paint weather proof emulsion paint of (white or tinted) including one coat of exterior primer complete all as specified and directed

Atish Builders LLP (BID ID -3376314)

Ashish Sehgal and Co. (BID ID -3375946)

M/S MG GROUP (BID ID -3375551)

shakti construction (BID ID -3383508)