REPAIR/MAINTENANCE GEYSER, FAN AND SOLAR HEATER IN ARMY AREA UDAIPUR

Amount

Dismantling carefully and taking out/removing of old copper winding of ceiling fans of size 1400 mm sweep any type of model or any vintage of any make and rewinding with New super enameled copper winding wire of existing gauge as per old copper winding including providing insulation and varnishing (Golden), Cleaning, Oiling, Greasing etc and refixing all the parts complete and Painting of rewinded fan with blade set of any size complete, with synthetic enamel paint by spray painting including filling cavities with filler, one coat after celaning all dust etc all as directed.and testing in E/M Store Make of winding wire-Devidayal/ USHA/Chetak of appropriate gauge as directed by EIC. IMPORTANT NOTE- Ceiling Fans/Exhaust Fans for rewinding/Overhauling consider under item no 1, 2, 3, 4 & 5 shall be done only in the MES store yard.

All as per Item No 1 above but ceiling Fans of Size 1200mm Sweep

All as per item No 1 here in before but Exhaust Fans of size 12” Sweep

All as per item No 1 here in before but Exhaust Fans of size 15”/16” Sweep

All as per Item No 1 above but Exhaust Fans of Size 18” Sweep

Takingout old unserviceable valve and Supply & Fixing Gun metal gate valve with iron wheel head (ISI marked) screwed both ends for solar water heating system of sizes 20 mm dia

All as per item no 6 above but size 25 mm dia

Supply and fixing in replacement of hot water tank complete with properly sealing the joint complete with removing and refixing of the insulation i.e glass wool, chicken mesh, aluminium sheet etc all as specified and directed for capacity 200ltr

Material & Labour for Repair and maintenance of solar water heating system thermosyphone type of following capacity by dismantling of flat plate collector, disconnecting inlet/outlet water connection, replacement of flanges gaskets, descaling of complete system replacment of GI nuts & bolts reassembling all the parts and testing complete all as specified and directed for capacity 500 Ltrs capacity Note : (i) Cost of minor parts i.e rubber gasket, aluminium strips, brass flange, front brackets, bolts, screws etc incls desclaing shall be deemed to be included in the rate of item No 1 above. (ii) Cost of gas welding or brazing of copper tube risers/ copper tube header, copper tank etc shall be inclusive.

All as per item No 9 above but size 200 Ltrs capacity Note : (i) Cost of minor parts i.e rubber gasket, aluminium strips, brass flange, front brackets, bolts, screws etc incls desclaing shall be deemed to be included in the rate of item No 1 above. (ii) Cost of gas welding or brazing of copper tube risers/ copper tube header, copper tank etc shall be inclusive.

Taking down old unserviceable GI pipe and supply and laying new GI pipe medium grade incl all GI pipe fittings, for solar water heating system/Geyser of size 25 ltrs/50 ltrs on wall/floor of sizes 20 mm dia

All as per item no 11 above but size 25 mm dia

Supply & Fixing in repair for providing insulation with glass wool, chicken mesh & aluminium sheet (26 guage) thick on existing GI pipe for solar heating system of sizes of GI pipe 20 mm dia

All as per item no 13 above but size 25 mm dia

Material & Labour for supply and replacement of exhaust Fans blade as per sample suitable for size 12” Sweep

Material & Labour for supply and replacement of exhaust Fans blade as per sample suitable for size 15/16” Sweep

Material & Labour for supply and replacement of exhaust Fans blade as per sample suitable for size 18” Sweep

Taking down from existing position/location including disconnecting/ dismantling carefully of ceiling fans of size 1200/1400 mm sweep, cleaning, oiling, Greasing etc and refixing at same place, testing complete all as specified & directed by EIC.

Supply & replace ball bearing SKF/NBC/TATA – 6201 suitable for Ceiling/Exhaust Fans of following size complete all as specified and directed by Engineer-In-Charge: -

All as per Item No. 19 but ball bearing SKF/NBC/TATA – 6202

All as per Item No. 19 but ball bearing SKF/NBC/TATA – 6203

All as per Item No. 19 but ball bearing SKF/NBC/TATA – SSV3

Supply & Replace Gun Metal bushes of suitable size for any type and any sweep of ceiling Fans complete all as directed by EIC.

Supply & Replace Shaft of suitable size for any type and any sweep of ceiling Fans complete all as directed by EIC.

Supply & Replace Rubber reel suitable for ceiling Fans (Any type/sweep and make) complete all as specified and directed by EIC.

Supply & Replace hanging clamp, Nuts and bolts suitable for Rubber Reel of ceiling Fan (Any type, sweep and make) complete all as specified and directed by EIC.

Supply & Replace Twin core copper flexible cable of size 23/0.0076 PVC insulated 1100 volts for ceiling fans.

Supply & fixing in replacement of PVC canopy for ceiling fan 1200/1400 mm sweep

Supply & fixing in replacement of capacitor holder for ceiling fan 1200/1400 mm sweep.

Supply & fixing in replacementof capacitor of 2.5 MFD all as specified .Make : USHA/ASIAN/ EPCOS

All as per item no 30 above but 4.0 MFD.Make : USHA/UNISTAR/ASIAN/ EPCOS

Supply and replacement of ceiling fan blade aluminium metal white colour for 1200 mm sweep ceiling fan

Supply and replacement of ceiling fan blade aluminium metal white colour for 1400 mm sweep ceiling fan

Supply and fixing in replacement of fan motor for wall mounted fan plastic body all as directed

Supply and fixing in replacement of fan motor for fresh air fan plastic body all as directed

Material & Labour for taking down geyser of cap-50 ltrs of any type/Make for existing position and location for refixing after carrying out following repairs :-(a) Dismantling geyser complete(b) Supply and replace brass door inlet outlet connection assy. Complete including rubber ring/gasket, screws, nuts and washers complete.(c) Cleaning & descaling inner vessel assy and pressure leakage testing.

All as per item No 36 above but for 25 ltrs geyser.

Hanging only geyser of cap 25 ltrs / 35 ltrs/50 ltrs incl grouting of bolts 10mmx150mm long with cement and making good distrubed surface.

Material & Labour for repair to inner tank of geyser cap 25/50 ltr complete taking down the geyser opening outer cover and taking out inner tank soldering/ welding/breezing the tank, testing with filling water, reassembling the geyser complete and fixed on position all as directed

Material & Labour for supply and replacement of inner tank of geyser cap 25 ltr complete taking down the geyser opening outer cover and taking out inner tank and replace with new steel tank, complete assembling and testing the geyser and fixed on position all as directed

All as per item No 40 above but for 50 ltr cap geyser

Material & Labour for supply and replacement of outer tank cover for geyser with top and bottom plate suitable for cap 25 ltr complete taking down the geyser opening outer cover and replace with new steel outer cover with 22 gauge sheet, reassembling and testing the geyser and fixed on position all as directed

All as per item No. 42 above but for 50 ltr cap geyser

Material & Labour for supply and replacement of glasswool for geyser cap 25/50 Ltr complete opening the geyser taking out old U/S glass wool and replace with new glasswool reassembling and fixed on position all as directed

Material & Labour for replacement in repairs stop valves cast copper alloy screwed down high pressure with fancy type cromium plated 15mm dia bore both ends screwed.

Supply and replace PVC connection with heavy duty copper connection cromium plated with brass alloy chromium plated nuts and washer suitable for hot water, complete of size15mm dia x 45cms long all as directed

ditto as per item No 47 but 600mm long

Supply replace and connect in repairs PVC insulated and sheathed 1100 Volts grade flexible three core insulated and sheathed multistranded copper condudtor cable of size 40/.0076mm.

Material & Labour for ABS enclosure with socket plug top and MCB’s for 240 volts 25 Amps single pole and neutral enclosure with two pin earth plug and socket complete with one SP 25 Amps MCB including suitable size of Ist class wooden board all as directed.

Supply and replace heating element ISI marked of suitable type as per existing including rubber ring clamping screws etc complete of 1.5KW Make : BAJAJ/VENUS/THEETA

All as per item No 50 above but 2.00 KW Make : BAJAJ/VENUS/THEETA

Supply and replace themostatic switch ISI marked for geyser as per existing of range 15-65 degree temparature

Supply & Fixing in replacement of unserviceable indicating lamps for geysers of Bajaj/Venus/Ditz/Sphare hot/Sidhson or any other make complete all as specified and directed by Engineer-in-Charge.

Supply and replace vacuum release valve on inlet side of geyser

Supply and replace brass chromium plated horizontal/vertical non return valve of size 15mm dia bore ISI marked on inlet side of geyser.

Supply and replace pressure release valve complete

Supply and replace brass nut fusible plug

Material & Labour for grouting rack bolt for holding geyser upto 50 ltrs in wall including making good and matching existing surface and finish all as directed.

Supply and replace on line booster pump single phase with automatic pressure regulation upto 4.0 kg / cm 2 MAKE : GRANDFOS /CRI/Cropmton Greaves

Supply & replace 3 pin plug top 15 Amp. Make - Anchor/Kinjal

Taking out old unsv syphon assembly complete from 25/50 Ltrs geyser from site and Supply & Fixing new syphon assembly complete as per existing size and type complete all as directed

Supply only bearings of ceiling fans 1200mm sweep of size 6201 of specific Make: NBCZZ

Supply only bearings of ceiling fans 1200mm sweep of size 6202 of specific Make: NBCZZ

Supply only GI hook with rubber for hanging fan of suitable size as directed by Engr-in-charge

Supply only fan capcitors of cap 2.5mFD of make: Falcon

Supply only fan capcitors of cap 3.15mFD of make: Falcon

Supply only syphon assy for geyser of cap 25 ltrs as directed by Engr-in-charge

Supply only gubber gasket seal for syphon assy of 25 ltrs cap

Supply only safety valve for geyser of cap 25 ltrs

Supply only heating element for 25 ltrs of shape triangle shape

Supply only thermostat for 25 ltrs cap geysers

Supply only indicators for geysers of colors RED/GREEN

Supply only fan capacitor holder PVC

M/s SUNIL ENTERPRISES

Punjab Traders