Replacing of old GI Pipe Line along the Internal Roads of Mukkuvanta Parambu Colony, Palloor.

Amount

Code No. 15.43.2:- Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - bituminous road

Code No.2.10.1.2:- Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m - all kinds of soil - pipes,cables etc , exceeding 80mm dia but not exceeding 300 mm dia

Code No. 31.160.1H :- Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement, excludingUPVC specials such as bends,tees, threaded pieces, couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 90mm dia.

Code No. 31.164.1H:- Providing and fixing in position UPVC moulded equal Tee (Finolex / jain)(1 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 90mm dia

Code No.31.5.1A:- Making connection of uPVC distribution branch with Upvc main of following sizes by providing and fixing tee including cutting the pipe etc.,compete.-63 mm dia to 90 mm dia nominal bore.

Code No. Code No. 31.48.4A:- Providing and fixing C.I. sluice valve (PN 1.6) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 80 mm dia

Code No. 31.172.1B:- Providing and fixing in position UPVC moulded tail piece without flange(Finolex / jain) (0.6 Mpa)conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc, complete - 75mm dia

Code No. 31.47.1:- Providing flanged joints to double flanged C.I./D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc.,complete - 80mm diameter pipe.

Code No. 31.179.1C:- Providing and fixing in position UPVC fabricated bend (Finolex / jain)(1 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 90 mm dia

Code No. 31.171.1H:- Providing and fixing in position UPVC moulded endcap (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 90mm dia

Code No. 31.51.2:- Constructing masonry Chamber 60 x 60 x 75 cm inside with 35 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter 160 mm bottom diameter and 180 mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design - with brick class designation 35

Code No. 18.9.31:- Providing and fixing ASTM pipes including all ASTM plain & brass threaded fittings this included jointing of pipes & fittings with one step ASTM solvent cement , trenching refilling & testing of joints complete (External work) - 20 mm nominal outer dia pipes

Code No. 18.20.2:- Providing and fixing brass ferrule with C.I.mouth cover including boring and tapping the main - 20 mm nominal bore

Code No. Non PSR item:- Providing and fixing PVC Tap of approved quality ISI Marked for the Public Taps.

Code No. 18.16.2:- Providing and fixing brass stop cock of approved quality - 20mm nominal bore

Code No. 30.7:-Supply of Quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness

Code No. 4.12B:- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with smooth 3 wheeled steel roller to achieve the desired density (As per MoRTH specification, 4th Revision)

Code No. 18.46.2:- Providing and fixing G.I.union in G.I.pipe including cutting and threading the pipe and making long screws etc.complete (New work) - 20 mm nominal bore