Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.1 LAccepted-AOC NO 3 JAMI JAM KHAN ROAD 1ST LANE ROYAPETTAH CHENNAI 600 014 | CHENNAI | CHENNAI | TAMIL NADU | 600014 | ₹7.1 L Quoted ₹7.2 L | L1 | Accepted-AOC LOWEST BID |
| 2 | L2₹7.4 LRejected-Finance NO 5 FIRST CROSS STREET GOPALAPURAM THIRUVIKANAGAR CHENNAI 600 082 | CHENNAI | CHENNAI | TAMIL NADU | 600082 | ₹7.4 L | L2 | Rejected-Finance NOT LOWEST |
| 3 | L3₹8.0 LRejected-Finance PLOT NO 15 JAYASURIYA STREET GANGAI NAGAR KALLIKUPPAM AMBATTUR CHENNAI 600053 | CHENNAI | CHENNAI | TAMIL NADU | 600053 | ₹8.0 L | L3 | Rejected-Finance NOT LOWEST |
| 4 | L4₹8.0 LRejected-Finance ITTIKUNNATH X 386 KOREPARAMBIL ROAD NJARACKAL ERNAKULAM 682505 | ERNAKULAM | ERNAKULAM | KERALA | 682505 | ₹8.0 L | L4 | Rejected-Finance NOT LOWEST |
| Sl No | Description | Qty | Unit | Banyan Engineers and Contractors L3 | G.L.THIRUMALAI NAIDU AND COMPANY L1 | HIGH TECH ENGINEERS AND CO L4 | SHREERAMFOUNDATION L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises out side MD land all as specified and as directed. | 29 | Sqm | 90 ₹2,610 | 27 ₹783 | 100 ₹2,900 | 45 ₹1,305 |
| 2.00 | Material and Labour for Non- skid pin haded ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed | 6 | Sqm | 1,200 ₹7,200 | 900 ₹5,400 | 1,050 ₹6,300 | 1,300 ₹7,800 |
| 3.00 | Material and Labour for glazed ceramic coloured design tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat of CM 1:4 etc complete all as specified and directed | 10 | Sqm | 1,200 ₹12,000 | 900 ₹9,000 | 1,100 ₹11,000 | 1,300 ₹13,000 |
| 4.00 | S&F Vitrified Light shade ceramic tiles 10 mm thick (square/ rectangular) of double charged, area of each tile exc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match ncluding 15 mm thick screed bed in CM 1:6.complete all as specified and directed | 10 | Sqm | 1,200 ₹12,000 | 1,080 ₹10,800 | 1,200 ₹12,000 | 1,300 ₹13,000 |
| 5.00 | - Ditto - as above item No.4 but as in skirting/ dado including backing coat of CM 1:4 10 mm thick etc complete all as specified and directed. | 3 | Sqm | 1,300 ₹3,900 | 1,200 ₹3,600 | 1,230 ₹3,690 | 1,250 ₹3,750 |
| 6.00 | Taking down cement plaster from stone/brick walls/ ceiling including racking out joints for keys and scrubbing down with water etc, complete all as specified and directed. | 105 | Sqm | 90 ₹9,450 | 36 ₹3,780 | 120 ₹12,600 | 80 ₹8,400 |
| 7.00 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaes of walls in CM (1:6) and finised even and smooth (without using extra cement) complete all as specified and directed | 100 | Sqm | 240 ₹24,000 | 270 ₹27,000 | 320 ₹32,000 | 250 ₹25,000 |
| 8.00 | Material and Labour for 10 mm thick rendering in CM (1:4) on ceiling on soffits and finised even and smooth (without using extra cement) complete all as specified and directed | 5 | Sqm | 220 ₹1,100 | 250 ₹1,250 | 300 ₹1,500 | 200 ₹1,000 |
| 9.00 | Material and labour for preparation of new plastered wall surfaces and applying two coats of Interior emulsion /distemper oil emulsion over a coat of primer including applying avarage one coat of wall care putty, complete all as specified and as directed. | 100 | Sqm | 90 ₹9,000 | 45 ₹4,500 | 110 ₹11,000 | 130 ₹13,000 |
| 10.00 | Material and Labour for Preparation new plastered surfaces of ceiling and applying three coat of white wash on ceiling complete all as specified and directed. | 5 | Sqm | 25 ₹125 | 18 ₹90 | 30 ₹150 | 20 ₹100 |
Updated dates
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
6 Jan 2026, 6:55 pmClosed
GE NAVY CHENNAI
GE NAVY CHENNAI MILITARY ENGINEER SERVICE FORT SAINT GEORGE, RAJAJI SALAI, CHENNAI -600009
REPAIRS TO WELCOME MAINTENANCE TO MD OFFICERS ACCN AT NOFRA I AND CERTAIN B/R AND E/M ITEMS TO MD AND OTM ACCN OF ZONE A UNDER GE (NAVY) CHENNAI
2025_MES_744189_1
8729/E8
Open Tender
Civil Works
180 days
CHENNAI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE NAVY CHENNAI
₹18,000
Yes
30 Mar 2026
11 Dec 2025
7 Jan 2026
11 Dec 2025
6 Jan 2026
25 Dec 2025
Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish off the premises out side MD land all as specified and as directed.
Material and Labour for Non- skid pin haded ceramic coloured tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.complete all as specified and directed
Material and Labour for glazed ceramic coloured design tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat of CM 1:4 etc complete all as specified and directed
S&F Vitrified Light shade ceramic tiles 10 mm thick (square/ rectangular) of double charged, area of each tile exc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match ncluding 15 mm thick screed bed in CM 1:6.complete all as specified and directed
- Ditto - as above item No.4 but as in skirting/ dado including backing coat of CM 1:4 10 mm thick etc complete all as specified and directed.
Taking down cement plaster from stone/brick walls/ ceiling including racking out joints for keys and scrubbing down with water etc, complete all as specified and directed.
Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaes of walls in CM (1:6) and finised even and smooth (without using extra cement) complete all as specified and directed
Material and Labour for 10 mm thick rendering in CM (1:4) on ceiling on soffits and finised even and smooth (without using extra cement) complete all as specified and directed
Material and labour for preparation of new plastered wall surfaces and applying two coats of Interior emulsion /distemper oil emulsion over a coat of primer including applying avarage one coat of wall care putty, complete all as specified and as directed.
Material and Labour for Preparation new plastered surfaces of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.
Ditto all as per item No-10 above but one coat of white wash on old decorative surfaces of ceiling complete all as specified and directed
Material and Labour for applying average one or more coat of birla wall care putty on existing walls to make surface even and smooth includiing removal of existing putty surface etc complete all as specified and directed.
Material and Labour for preparation of old decorated plastered surfaces of walls including cleaning with wire brush with water, scrapping down smoke soot, pencil/ pen markes, remove oil cut grease spots Washing, rubbing down and stopping of exsting surface of OBD etc and applying one coats of interior emulsion/ distemper oil emulsion on walls etc complete all as specified and directed.
Ditto all as per item No-13 above but two coat of interior emulsion/ distemper oil emulsion on old decorative surfaces of walls complete all as specified and directed
Material and Labour for Preparation old plastered surfaces of walls including cleaning with wire brush with water, scrapping down smoke soot, pencil/ pen markes, tradig oil cut grease spots etc and applying two coat of white wash complete all as specified and directed.
Material and labour for preparation of old decorated surfaces of wall and applying antifungal treatement as required and applying one coats of 100% acrylic emulsion paint and filling crack with crack seal or white cement and including necessary scaffoldings etc complete all as specified
M & L for Preparation of old steel painted surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of sysnthetic enamel paint complete all as specified and as directed.
M & L for Preparation of old wooden painted surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of synthetic enamel paint of wood and wood based materials complete all as specified and as directed.
Supply and fix for 30 mm thick 2nd class hardwood factory made Glazed and skeleton windows,ventilators, etc, open rebated and prepared to receive glass, gauze, etc. (with out sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats complete all as specified.
Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 100 mm length complete all as specified and directed
Supply and fix for aluminium wire cloth 0.45mm nomonal dia of wire and 1.40mm average width of aperture and fixed with aluminium wire staples complete all as specified and directed.
Ditto- all as per item No-21 above but fixed in repair to aluminium fixed / sliding windows, aluminium ventilators, wooden wire mesh doors, PVC wire mesh doors including teak wood beading for wooden doors etc etc complete all as specified and directed.
Supply and fix velcro type neylon wire mesh including velcrow tape manual roller up,hydro fabrication system including male and female attachment stiched to mesh and /fixed to wooden frame and including removal of existing of any type mesh complete all as specified and as directed.
Supply and fix for plain sheet glass, 4mm thick, ordinary quality and fixed to aluminium fixed / sliding windows, aluminium ventilators in square not exceeding 0.5sqm in each including Hacking out old broken glass etc complete all as specified and as directed
Supply and fix for plain sheet glass, 4.80 mm thick, ordinary quality and fixed to Aluminum Partetions and Aluminium doors in square not exceeding 0.5sqm in each including Hacking out old broken glass etc complete all as specified and as directed
Supply and Fix for 20 mm outer dia 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and composite pressure pipes including all Crimp type internal sealing Planstic metal Composite fittings (such as elbows, tees, reducers, couplers, short pieces, connectors, etc.) and hooks (in case of concealed pipe work)/ clamps (in case of exposed pipe work) etc complete all as specified. having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors and including taking down GI Pipe 15mm bore necessary scaffoldings upto G+8 etc complete all as specified.
Material and Labour for Cleaning and removal of all scale, dirt,mud and any foreign material and removing accumulated silt etc from RCC/PVC tank and from mouth for circulating pipes of any dia etc. repairs to minor cracks stopping leaking of inlet/outlet pipe by tightening of joints and alike and making joints leak proof of capacity of tank exceeding 250 Litres and not exceeding 1000 Litres all as specified including marking with white paints up to height of G+8 stories and directed by Engineer in charge.Note: Marking of Date of cleaning and Due Date with stencil with white paint
Supply and Fix in repair for 20mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms)
-do- all as per tem No 28 above but 25mm dia.complete all as specified and directed.
S&F in repairs EWC Vitreous China wash down water closet pan (pedestal pattern), white/ coloured (excluding fixing bolts, flushing cistern and flush pipe) but incl heavy duty seat cover complete set complete all as specified.
Supply and Fix in repair for low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan of white / coloured complete incl brackets and 15mm bore 450mm long PVC connection all as directed.
Supply and fix in repair vitreous china wash hand basin (flat back or angle back type) of size 630x450mm including cutting for and pinning in ends of MS brackets of 30 cm length or erecting stand including 15mm dia CP Pillar cock, 32mm dia 1mtr PVC pipe and chromium plated waste coupling with check nuts complete all as specified and as directed.
S&F PVC connections 15 mm size with PTMT nuts of length 600mm all as specified and as directed. .
Supply and Fix in repair for Fancy type CP stop/angular cock 15mm dia cast copper alloy, chromium plated fency type screwed down high pressure with half turn of capstan heads, screwed both end for iron pipe or for unions and fixed. complete all as specified and directed .
Supply and Fix in repair for Fancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, long/ short bodys screwed down screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed
Supply and Fix for in repair pillar taps, 15mm fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe of bore of pipe fixed all as specified and as directed.
Supply and Fix in repair for 125 mm dia Fancy type brass CP shawer rose all as specified and as directed by Engineer-in-Charge. complete all as specified and directed .
Supply and Fix in repair for tubular towel rail, brass CP 20mm dia, 'D' type, 60cm long between flanges made of brass chromium plated complete all as specified and as directed.
Supply and Fix in repair for PVC health faucet (ABS) with rubit cleaning system 1.25 m long, PVC flexible tube and ABS wall hook complete all as specified and directed.
Supply and fix stainless steel sink with drainage board kitchen bowl size 410 mm x 330 mm x 160 mm and overall size of 915 mm x 460 mm with drain board etc made out of 1 mm thick steel with plug and washers and waste pipe including bedding in cement mortar on to dwarf wall including fixing cantilever cast iron brackets and connecting union to 1mtr long waste pipe and 40mm waste coupling etc., all as per manufacturer's instructions including taking down old drain board of any size and taken as credit complete all as specified and as directed.
S&F plastic water closet seat cover, black,white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as in repairs complete all as specified and directed
S&F in repairs 150mm long Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed
S&F in repairs for 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed Make Jaquor
S&F in repairs for avg 32/40 mm dia chromimun plated waste coupling fixed in WHB/Sink complete all as specified and directed
Supply and fix stainless steel plate rack kitchen 1 mm thick of size 75 cm x 95 cm with racks and shelfs including complete fixing arrangements as per manufacturers instructions and taking down the old stainless steel plate rack and taken as credit complete all as specified and as directed.
Supply and fix cabinet mirror of size 335x140x430mm with approved colour complete including necessary fixing arrangements and taking down the old mirror and taken as credit complete all as specified and as directed. Make -Water Tech
Supply and fix in repairs grating/ round 140 mm dia of Make PTMT (minimum wieght 50 gms) complete all as specified and as directed.
Supply and fix in repair 2nd class hard wood fillets exc 13 but n exc 25 sqcm one side wrought fixed at the edges of prelaminated particle board with nails or brads complete all as specified and as directed.
Cutting chases, pinning in. making good to facings for inserting galvalume sheet into the e brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good to the existing surface, cutting not exc 10 cm girthcomplete all as specified and directed.
Taking down chowkhats with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.
Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.
Taking down Shutters of any description exc 1 sqm but not exc 2 Sqm each
Taking down Shutters of any description n. exc 1 sqm Sqm each
Taking down and refixing the same opening of door Shutters of any description exc 1 sqm but not exc 2 Sqm each and including easing and adjusting before fixing of door shutter complete all as specified and directed.
Taking down and refixing the same opening of door Shutters of any description n exc 1 sqm but each and including easing and adjusting before fixing of door shutter complete all as specified and directed.
Demolition of Brickwork built in cement motar, stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.
Material and Labour for Brickwork with flyash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
Supply and fix for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and
fixed complete all as specified.
Supply and fix for 35 mm thick 2nd class Hard wood rail and style of Plain framed, panelled shutter panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.
Supply and fix for 32mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
Supply and fix for 35 mm thick 2nd class hardwood factory made Glazed and skeleton fully and partially door shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), any numbers edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified.
Supply and fix for 30 mm thick 2nd class hardwood factory made Glazed and skeleton windows,ventilators, etc, open rebated and prepared to receive glass, gauze, etc. (with sash bars), any numbers edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b); supplied and fitted to chowkats complete all as specified.
Supply and fix in repair for aluminium powder coated tubular fancy type curtain rail/ drapery rod with and including two nos of bracket/holders suitable for drapery 28mm dia rods of one window / door openings etc complete all as specified and as directed. Make:- Allishan-Ivory pearl interior series
Supply and fix for solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and directed
Supply and fix for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed
Supply and fix for 75 mm size, SS Butt hinges heavy duty, , and fixed complete all as specified and directed
Ditto- all as per item No- 66 above but fixed in repair
Supply and fix for 125mm size, SS Butt hinges heavy duty, , and fixed complete all as specified and directed
Ditto- all as per item No- 68 above but fixed in repair
Supply and fix aluminium handles cast type anodised for 100 mm complete all as specified and directed
Ditto- all as per item No- 70 above but fixed in repair
Supply and fix aluminium handles cast type anodised for 150 mm complete all as specified and directed
Ditto- all as per item No- 72 above but fixed in repair
Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 150 mm length complete all as specified and directed
Ditto- all as per item No- 74 above but fixed in repair
Supply and fix for aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed
Ditto- all as per item No- 77 above but fixed in repair
Supply and fix for Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed of length of bolt 300mm complete all as specified and directed
Ditto- all as per item No-78 above but fixed in repair
Material and Labour for 15mm thick Rendering on fair faces of brick work or concrete surfaces in CM (1:4) using with WPC @ 3% by wt of cement complete all as specified and directed. ( Note : WPC shall be measured and paid separately)
Supply only Integral water proofing compound complete all as specified.
S&F in repairs Door closer hydraulically of Aluminium (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed
Material and Labour for Preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as per manufacturer instruction and including necessary scaffoldings upto G+4 etc etc complete all as specified and directed.(The makes of exterior grade acrylic emulsion shall be : Asian Paints " Apex Ultima", Nerolac paints " Excel Anti Peel Emulsion", ICI Dulux " Weather Shield Max / Ultra Clean Emulsion", Berger"Long Life 7" complete all as specified.
Material and Labour for 12-15 mm thick of any shade (table rubbed and polished) laid and jointed in flooring strips, step type window cills and jambs etc of green Marble over and including 15mm thick screed bed/ backing coat in CM 1:6 complete all as specified and directed
S&F in repairs 150mm long Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed
Material and Labour for Preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) including old unserviceable fixture and fittings complete etc removing the materials for taking credit and making good the disturbed surface of wall/floor etc.
Point wiring with 1.5 sqmm FRLS PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and inculding non metallic PVC rigid concealed conduit and conduit accessories, medium grade, ISI marking, concaled including provn of pre fabricated galvanised module box of 2 mm thick of suitable size as required at site for fixing switches, sockets, inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable for earth continuity, connected to earth duly complete all as specified and directed for one light point controlled by one switch
All as per Item no 88 above but for one bell point controlled by one switch
All as per Item no 88 above but for one fan (Ceiling/Wall/Exhaust fan) point controlled by one switch
All as per Item no 88 above but for one 3 Pin socket outlet 5 amps socket on same board
All as per Item no 88 above but for one 3 pin socket outlet 15 amps socket on independent board with 2.5 sqmm FRLS PVC wire and one run of 2.5 sqmm copper cable for earth continuty.
S&F modular Socket, 6A - 2/3 pin combined 2 module, 240 volts complete all as specified and as directed
S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed
S&F Modular bell push switch single pole one way 6 Amp, 240 volts 1 module complete all as specified and as directed
S&F Modular Fan step regulator, 120W - 2 module complete all as specified and as directed
S&F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and as directed
S&F Celing rose 3 termianls PVC/Polycarbonate isolated body complete all as specified and as directed
S&F in repair concealed in wall MCB DB double door single pole and neutral 12 way sheet steel phospetised powder painted with 200 amps rated bus bar 240 volts neutral link IP:43 protection, double door flush mounting typw, making good the disturbed area as per existing surface complete all as specified and directed.
S&F in repair concealed in wall MCB DB double door single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar 240 volts neutral link IP:43 protection, double door flush mounting typw, making good the disturbed area as per existing surface complete all as specified and directed.
S&F in repair MCB SPN 40 to 63 Amps 240 Volts , 10KA complete all as specifi
ed and as directed
S&F in repair MCB SP 6 to 32 Amps 240 Volts , 10KA complete all as specified and as directed
S&F in repair Earth metal plug socket with MCB SP 20 Amp, 230 V AC, 50 Hz AC supply and making good the distrubered surfaces etc complete all as specIfied and directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
BOQ_833301.xls
BOQ • 0.45 MB
8729GENERALPAGES.pdf
Tender Documents • 0.46 MB
8729PS.pdf
Tender Documents • 0.63 MB
Download all tender documents and submit your bid