Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹24.9 L+₹60,240 (2.48%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹29.7 L+₹5.4 L (22.2%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹35.9 L+₹11.5 L (47.5%)Rejected-Finance NO 133 RASHTRAPATHI ROAD SECUNDERABAD 500 003 | SECUNDERABAD | HYDERABAD | TELANGANA | 500003 | L4 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | THE DECAN ENGINEERING AND REFRIGERATION COMPANY L4 | himalayan edge enterprises L2 | SRI SAI RAM ENTERPRISES L3 | SRI VARADA CONSTRUCTIONS L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including/without removal of batten / conduit / gutties / wooden boards / Hylam sheet/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.
Note: Taking down for existing surface point wiring including removal of conduit. | 304 | POINT | 30 ₹9,120 | 2 ₹608 Lowest | 10 ₹3,040 | 8 ₹2,432 |
| 2.00 | M&L for point wiring with single core PVC FRLSH insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia, conduit wiring on walls including cutting and chasing of any type of wall, Junction boxes.Tee and provision of 2.0mm thick MS terminal boxes and covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC FRLSH insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP. | 100 | POINT | 850 ₹85,000 | 450 ₹45,000 Lowest | 550 ₹55,000 | 450 ₹45,000 Lowest |
| 3.00 | All as per item No. 2 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator and all as directed | 25 | POINT | 850 ₹21,250 | 450 ₹11,250 Lowest | 550 ₹13,750 | 450 ₹11,250 Lowest |
| 4.00 | All as per item No. 2 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .and all as directed | 25 | POINT | 850 ₹21,250 | 450 ₹11,250 Lowest | 550 ₹13,750 | 470 ₹11,750 |
| 5.00 | All as per item No. 2 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.and all as directed | 20 | POINT | 250 ₹5,000 | 150 ₹3,000 Lowest | 180 ₹3,600 | 180 ₹3,600 |
| 6.00 | All as per item No. 2 above but for One light point controlled by two 2 - way switch 5 amps, SP | 2 | POINT | 850 ₹1,700 | 450 ₹900 Lowest | 750 ₹1,500 | 520 ₹1,040 |
| 7.00 | All as per item No. 2 above but for One Bell point controlled by one bell bush switch 5 amps, single pole. | 10 | POINT | 850 ₹8,500 | 450 ₹4,500 Lowest | 550 ₹5,500 | 450 ₹4,500 Lowest |
| 8.00 | All as per item No. 2 above but using 2.5 Sqmm single core copper conductor cable for 3 pin 15 Amps switch socket combination point including running 2.5 Sqmm copper conductor PVC wire as earth continuity conductor on independant board. | 20 | POINT | 1,050 ₹21,000 | 500 ₹10,000 | 750 ₹15,000 | 450 ₹9,000 Lowest |
| 9.00 | M&L for point wiring with single core PVC FRLSH insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through any type of existing concealed/ existing surface conduit wiring and utilise the exiting MS terminal boxes ,covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC FRLSH insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP. | 50 | POINT | 700 ₹35,000 | 350 ₹17,500 Lowest | 450 ₹22,500 | 350 ₹17,500 Lowest |
| 10.00 | All as per item No. 9 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator and all as directed | 10 | POINT | 700 ₹7,000 | 350 ₹3,500 Lowest | 450 ₹4,500 | 380 ₹3,800 |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
1 Dec 2025, 6:00 pmClosed
GE MCEME SECUNDERABAD
GARRISON ENGINEER MCEME, MCEME CAMPUS, TRIMULGHERRY (POST) SECUNDERABAD - 500015
COMPREHENSIVE MAINT AND REPAIRS OF ELECTRICAL WIRING ALONGWITH FITTING AND FIXTURE AT MCEME GE MCEME SECUNDERABAD
2025_MES_739128_1
8716/E8
Open Tender
Civil Works
Item Rate
180 days
SECUNDERABAD
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MCEME SECUNDERABAD
₹68,000
Yes
21 Jan 2026
10 Nov 2025
3 Dec 2025
10 Nov 2025
1 Dec 2025
24 Nov 2025
Amount
Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including/without removal of batten / conduit / gutties / wooden boards / Hylam sheet/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified. Note: Taking down for existing surface point wiring including removal of conduit.
M&L for point wiring with single core PVC FRLSH insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia, conduit wiring on walls including cutting and chasing of any type of wall, Junction boxes.Tee and provision of 2.0mm thick MS terminal boxes and covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC FRLSH insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP.
All as per item No. 2 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator and all as directed
All as per item No. 2 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .and all as directed
All as per item No. 2 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.and all as directed
All as per item No. 2 above but for One light point controlled by two 2 - way switch 5 amps, SP
All as per item No. 2 above but for One Bell point controlled by one bell bush switch 5 amps, single pole.
All as per item No. 2 above but using 2.5 Sqmm single core copper conductor cable for 3 pin 15 Amps switch socket combination point including running 2.5 Sqmm copper conductor PVC wire as earth continuity conductor on independant board.
M&L for point wiring with single core PVC FRLSH insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through any type of existing concealed/ existing surface conduit wiring and utilise the exiting MS terminal boxes ,covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC FRLSH insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP.
All as per item No. 9 above but for One Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator and all as directed
All as per item No. 9 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board and all as directed .
All as per item No. 9 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.and all as directed
All as per item No. 9 above but for One light point controlled by two 2 - way switch 5 amps, SP and all as directed
All as per item No. 9 above but for One Bell point controlled by one bell bush switch 5 amps, single pole
All as per item No. 9 above but using 2.5 Sqmm single core copper conductor cable for 3 pin 15 Amps switch socket combination point including running 2.5 Sqmm copper conductor PVC FRLSH wire as earth continuity conductor on independant board.
S & F Switch piano , single pole one way, flush type 5 Amps capacity 230 volts complete all as specified.
S & F Switch piano , single pole two way, flush type 5 Amps capacity 230 volts complete all as specified.
Supply and fixing bell push of 5 amps, single pole flush type complete all as specified and as directed.
Supply and fixing electric bell of 230 Volts AC single pole complete all as specified and as directed.
S & fixing switch socket combination 2 in 1 multipurpose 2/3 pin 5 amps flush type complete all as specified.
S & fixing switch socket combination 2 in 1 multipurpose 3pin 5/15 amps flush type complete all as specified.
S & fixing electronic ceiling fan regulator stepped type heavy duty suitable to work on 230 volts complete all as specified.
S& fixing lamp holder insulated body angle/batten fittings fixed with PVC round blocks complete all as specified.
S & fixing ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.
S & Fixing Modular switches 1M 6 A, with suitable modification in the existing switch board. and all as directed
S & Fixing Modular switches 1M 16 A, with suitable modification in the existing switch board. and all as directed
Supply and socket modular type multipurpose 2/3 pin 6 amps 2 in 1 230 Volts all as specified.and all as directed
Supply and fix socket modular type 2 in 1 multipurpose 3/5 pin 6/16 Amps 230 V complete all as specified.and all as directed
S & Fixing electronic ceiling fan regulator stepped modular type heavy duty suitable to work on 230 volts complete all as specified.
Supply and fixing modular white cover plate with frame 3 module all as specified and directed.
Supply and fixing modular white cover plate with frame 6 module all as specified and directed.
Supply and fixing modular white cover plate with frame 8 module all as specified and directed.
Supply and fixing modular metal flush box 3 module all as specified and directed.
Supply and fixing modular metal flush box 6 module all as specified and directed.
Supply and fixing capacitor 2.15 Mfd for ceiling fan.
S&F sheet metal enclosure with 2 pole and Earth Metal Plug & Socket including 20A SP MCB complete all as directed by Engr in Charge. MAKE: HAVELLS/Schneider/Standard/C&S/HPL/ABB.
Supply and fixing Industrial laminated hylam sheet 3 mm thick ISI marked cutting to required size and shape suitable for fixing switch/socket/regulator of 250 mm x 200 mm size all as specified and directed
Supply and fixing Industrial laminated hylam sheet 3 mm thick ISI marked cutting to required size and shape suitable for fixing switch/socket/regulator of 175 mm x 100 mm size all as specified and directed
M & L Submain wiring on surface with 2 runs of single core 6 sqmm PVC FRLSH insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25 mm dia including one run of single core 6 sqmm PVC FRLSH insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified and as directed.Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured as one unit length.
M & L Submain wiring on surface with 4 runs of single core 10 sqmm PVC FRLSH insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 32 mm dia including two run of single core 10 sqmm PVC FRLSH insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified and as directed.Note:-Four runs of cable, two run of earth contuinity conductor and one run of conduit shall be measured as one unit length.
S &F Vertical type TPN DB 4 way double door for incoming MCCB TPN 415 volts AC 3 phase 50 Hz 16 KA, 125 Amps made out of CRCA sheet housing with powder coating complete all as specified and directed MAKE: HAVELLS/Schneider/Standard/C&S/HPL/ABB.
S &F Vertical type TPN DB 8 way double door for incoming MCCB TPN 415 volts AC 3 phase 50 Hz 16 KA, 125 Amps made out of CRCA sheet housing with powder coating complete all as specified and directed. MAKE: HAVELLS/Schneider/Standard/C&S/HPL/ABB.
S&F MCCB 415 Volt 16/18 KA 4 pole 100 Amp thermal magnetic trip release & setting ICU= 100% ICS as incoming with fixing arrangement complete all as specified and directed suitable for VTPN DB. MAKE: HAVELLS/Schneider/Standard/C&S/HPL/ABB.
S&F MCCB 415 Volt 16/18 KA 4 pole 125 Amp thermal magnetic trip release & setting ICU= 100% ICS as incoming with fixing arrangement complete all as specified and directed suitable for VTPN DB .MAKE: HAVELLS/Schneider/Standard/C&S/HPL/ABB.
Supply and Fixing MCB DB double door TPN 4 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface. MAKE: HAVELLS/Schneider/Standard/C&S/HPL/ABB.
Supply and fixing MCB TPN, 63 Amps, C curve, 415 volts complete all as specified and directed. MAKE: HAVELLS/Schneider/Standard/C&S/HPL/ABB.
Supply and fixing MCB TP, 63 Amps, C curve, 415 volts complete all as specified and directed. MAKE: HAVELLS/Schneider/Standard/C&S/HPL/ABB.
Supply and fixing MCB double door DB SPN 8 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface.MAKE: HAVELLS/Schneider/Standard/C&S/HPL/ABB.
Supply and fixing MCB double door DB SPN 12 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface. MAKE: HAVELLS/Schneider/Standard/C&S/HPL/ABB.
Supply and fixing MCB SPN 32 Amps C curve, 240 volts for fixing on MCB DB. MAKE: HAVELLS/Schneider/Standard/C&S/HPL/ABB.
Supply and fixing MCB SP 6 to 32 Amps C curve, 240 volts for fixing on MCB DB. MAKE: HAVELLS/Schneider/Standard/C&S/HPL/ABB.
Supply & replacement of 20 W ( minimum 120 lumem / watt) surface / wall mounted LED batten having PC diffuser, luminous efficacy of minimum 100 lumen/w, CRI>80, PF>0.9, CCT 6500K, independent isolated SMPS pased constant current electronic LED driver with THD<20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, with rated life 50,000 burning hours, system efficiency/ lumens 120 lumen per watt and housing made up of aluminium, white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input freqency 50-60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. MAKE: Havells/Bajaj/Philips/Crompton/Wipro.
Supply and fixing Warm white 20 W ( minimum 120 lumem / watt) surface / wall mounted LED batten having PC diffuser, luminous efficacy of minimum 100 lumen/w, CRI>80, PF>0.9, CCT 6500K, independent isolated SMPS pased constant current electronic LED driver with THD<20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, with rated life 50,000 burning hours, system efficiency/ lumens 120 lumen per watt and housing made up of aluminium, white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input freqency 50-60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.. MAKE: Havells/Bajaj/Philips/Crompton/Wipro.
Supply and fixing LED light batten fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with polycarbonate housing & integrated driver (with burning hrs 50000) including connecting up with three core flexible copper conductor cable of suitable size including taking down old light fitting complete all as specified and directed. MAKE: Havells/Bajaj/Philips/Crompton/Wipro.
Supply and fixing ultra modern recess mounted 36W LED luminaire suitable for armstrong grid /POP ceiling of 2'x2' and complete including electronic driver (with burning hrs 50000) including taking down old light fitting all as specified and directed. MAKE: Havells/Bajaj/Philips/Crompton/Wipro.
Supply and fixing ultra modern recess mounted 15/18W LED luminaire suitable for armstrong grid /POP ceiling of 1'x1' and complete including electronic driver (with burning hrs 50000) including taking down old light fitting all as specified and directed. MAKE: Havells/Bajaj/Philips/Crompton/Wipro.
Supply and fixing ultra modern surface mounted 36W LED luminaire of 2'x2' complete including electronic driver (with burning hrs 50000) including taking down old light fitting all as specified and directed. MAKE: Havells/Bajaj/Philips/Crompton/Wipro.
Supply and fixing round shape 12/15 watt 220 volts AC 4''/6'' recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, suitable for roof ceiling /false ceiling including connecting up with three core flexible copper conductor cable of suitable size including taking sown old light fitting complete all as specified and directed. MAKE: Havells/Bajaj/Philips/Crompton/Wipro.
S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old light fitting all as specified and directed. MAKE: Havells/Bajaj/Philips/Crompton/Wipro.
Supply and fixing in repair LED post top lalten fitting for gate light 25 Watt 230 V AC decorative type with high pressure die cast aluminum hosing 40mm dia with driver, (with burning hrs 50000) complete including taking down old light fitting all as specified and directed. MAKE: Havells/Bajaj/Philips/Crompton/Wipro.
Supply and fixing in repair LED bollard fitting 12 Watt 230 V AC, 4' decorative round type with high pressure die cast aluminum hosing with driver, (with burning hrs 50000) complete including taking down old light fitting all as specified and directed. MAKE: Havells/Bajaj/Philips/Crompton/Wipro.
Supply and fixing Energy saving and environmental friendly long life 35W LED bldg security light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom opening seperate driver compartment with IP66 protection and impact resistance of IK08, potted Elect driver with surg protection complete with all accessories incl three run of 1.5 Sqmm Copper conductor cable from security light to ceiling rose complete. MAKE: Havells/Bajaj/Philips/Crompton/Wipro.
S&fixing in replacement of G.I. pipe bracket, 40 mm dia, 1.2 m long, bracket mounting clamp, bolts and nuts complete all as specified and as directed.
Supply and fixing highbay LED luminair Energy saving, environment friendly & robust Highbay/Mediumbay LED IP65 luminaire with high efficacywith presssure die cast aluminium housing of capacity 80/100 W, with all accessories including necessary electrical connection and provision of 3 core multistranded coper conductor for electric connection of highbay light complete (with burning hrs 50000). MAKE: Havells/Bajaj/Philips/Crompton/Wipro.
S & fix in replacement of LED driver of capacity 36/42 watt , single phase 230volts 50 Hz AC supply complete all as specified and directed
S & fix in replacement of LED driver of capacity 12/15/18 watt , single phase 230volts 50 Hz AC supply complete all as specified and directed
Supply only of Warm white LED blub of capacity 9/12/ watt , single phase 230volts 50 Hz AC supply complete all as specified and directed
S&F in replacement of air ventilation fan Plastic (PVC) body Type 250 mm , ,single phase, 250V AC including making necessary hole by breaking existing wall to fix air ventilation fan,with frame fixing holdfastner, bolt,washer etc including connection with twisted white three core flexible copper multistranded conductor cable from ceiling rose to connector all a directed by Engineer-in-charge. MAKE: Havells/Bajaj/Crompton/USHA
S&F in replacement of air ventilation fan Steel body Type 300 mm , ,single phase, 250V AC including making necessary hole by breaking existing wall to fix air ventilation fan,with frame fixing holdfastner, bolt,washer etc including connection with twisted white three core flexible copper multistranded conductor cable from ceiling rose to connector all a directed by Engineer-in-charge. .MAKE: Havells/Bajaj/Crompton/USHA
Supply and fixing in repair Geyser element 2000 watts ISI Marked of any type for Hot water apparatus (Geyser 25 / 50 Ltrs Capacity) and all as directed
Supply and fixing in repair Thermostat ISI Marked for Hot water apparatus (Geyser 25 / 50 Ltrs Capacity) and all as directed
Supply and fixing in repair Indicator bulb 230 v suitable for any make and colour for Hot water apparatus (Geyser 25 / 50 Ltrs Capacity) and all as directed
Supply and fixing in repair Pressure release valve suitable for 25 / 50 ltrs capacity Geyser and all as directed
Supply and fixing in repair PVC cold water connection pipe 60 cms long 15 mm dia for Hot water apparatus (Geyser 25 / 50 Ltrs Capacity) and all as directed
Supply and fixing in repair PVC hot water connection pipe 90 cms long 15 mm dia for Hot water apparatus (Geyser 25 / 50 Ltrs Capacity) and all as directed
Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH. Make : HPL/L&T/Secure.and all as directed
Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, checknuts and washers all as shown in Electrical Plate No.3 of SSR Part-I and connected to main switch board including excavation and earth work, PCC chamber in 1:3:6, RCC Cover in 1:2:4 type B-1 reinforced, 20 mm dia medium grade GI pipe with funnel and wire mesh complete and watering arrangement all as specified. (Note: GI pipe 15mm dia, GI wire 4mm dia upto 7.5m deemed to be included in quoted rate.)and all as directed
himalayan edge enterprises (BID ID -3486709)
SRI SAI RAM ENTERPRISES (BID ID -3486887)
THE DECAN ENGINEERING AND REFRIGERATION COMPANY (BID ID -3483451)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Document
0.29 MB
Tender Documents
Tender Documents • 0.79 MB
BOQ
BOQ • 0.56 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .